Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOUND VELOCITY - MEASUEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Non-linear wave propagation in acoustically lined circular ducts

An analysis is presented of the nonlinear effects of the gas motion as well as of the acoustic lining material on the transmission and attenuation of sound in a circular duct with a uniform cross-section and no mean flow. The acoustic material is characterized by an empirical, nonlinear impedance in which the instantaneous resistance is a nonlinear function of both the frequency and the acoustic velocity. The results show that there exist frequency bandwidths around the resonant frequencies in which the nonlinearity decreases the attenuation rate, and outside which the nonlinearity increases the attenuation rate, in qualitative agreement with experimental observations. Moreover, the effect of the gas nonlinearity increases with increasing sound frequency, whereas the effect of the material nonlinearity decreases with increasing sound frequency.

Nayfeh, A. H.↗

Effect of crossflow velocity on VTOL lift fan blade passing frequency noise generation

Analysis of noise measurements taken during tests of a remote lift fan wing installation, a V/STOL model transport with both lift and lift/cruise fans, and XV5B research aircraft flight tests has indicated a definite increase in pure tone sound pressure level due to crossflow over the face of the life fans. The fan-in-wing and V/STOL model transport tests were conducted in the NASA Ames 40 ft. by 80 ft. wing tunnel and the XV5B flight tests at Moffett Field. Increases up to 10 db were observed for the lift fan installation tested at crossflow to fan tip velocity ratios up to 0.25. Cruise fan noise levels were found to be unaffected by the external flow. The noise level increase was shown to be related to an increase in fan distortion levels.

Stimpert, D. L.↗

Rayleigh Scattering Diagnostic for Measurement of Temperature and Velocity in Harsh Environments

A molecular Rayleigh scattering system for temperature and velocity measurements in unseeded flows is described. The system is capable of making measurements in the harsh environments commonly found in aerospace test facilities, which may have high acoustic sound levels, varying temperatures, and high vibration levels. Light from an argon-ion laser is transmitted via an optical fiber to a remote location where two flow experiments were located. One was a subsonic free air jet; the second was a low-speed heated airjet. Rayleigh scattered light from the probe volume was transmitted through another optical fiber from the remote location to a controlled environment where a Fabry-Perot interferometer and cooled CCD camera were used to analyze the Rayleigh scattered light. Good agreement between the measured velocity and the velocity calculated from isentropic flow relations was demonstrated (less than 5 m/sec). The temperature measurements, however, exhibited systematic errors on the order of 10-15%.

Seasholtz, Richard G.↗

Roll Casting of Al-25%Si

Strip casting of Al-25%Si strip was tried using an unequal diameter twin roll caster. The diameter of the lower roll (large roll) was 1000 mm and the diameter of the upper roll (small roll) was 250 mm. Roll material was mild steel. The sound strip could be cast at the speeds ranging from 8 m/min to 12 m/min. The strip did not stick to the roll without the parting material. The primary Si, which existed at centre area of the thickness direction, was larger than that which existed at other area. The size of the primary Si was smaller than 0.2 mm. Eutectic Si was smaller 5 {mu}m. The as-cast strip was ranging from 2 mm to 3 mm thick and its width was 100 mm. The as-cast strip could be hot rolled down to 1 mm. The hot rolled strip was cold rolled. The primary Si became smaller and the pore occurred around the primary Si after the rolling.

36 MATERIALS SCIENCE↗

3D numerical simulation of the long range propagation of acoustical shock waves through a heterogeneous and moving medium

Many situations involve the propagation of acoustical shock waves through flows. Natural sources such as lightning, volcano explosions, or meteoroid atmospheric entries, emit loud, low frequency, and impulsive sound that is influenced by atmospheric wind and turbulence. The sonic boom produced by a supersonic aircraft and explosion noises are examples of intense anthropogenic sources in the atmosphere. The Buzz-Saw-Noise produced by turbo-engine fan blades rotating at supersonic speed also propagates in a fast flow within the engine nacelle. Simulating these situations is challenging, given the 3D nature of the problem, the long range propagation distances relative to the central wavelength, the strongly nonlinear behavior of shocks associated to a wide-band spectrum, and finally the key role of the flow motion. With this in view, the so-called FLHOWARD (acronym for FLow and Heterogeneous One-Way Approximation for Resolution of Diffraction) method is presented with three-dimensional applications. A scalar nonlinear wave equation is established in the framework of atmospheric applications, assuming weak heterogeneities and a slow wind. It takes into account diffraction, absorption and relaxation properties of the atmosphere, quadratic nonlinearities including weak shock waves, heterogeneities of the medium in sound speed and density, and presence of a flow (assuming a mean stratified wind and 3D turbulent ? flow fluctuations of smaller amplitude). This equation is solved in the framework of the one-way method. A split-step technique allows the splitting of the non-linear wave equation into simpler equations, each corresponding to a physical effect. Each sub-equation is solved using an analytical method if possible, and finite-differences otherwise. Nonlinear effects are solved in the time domain, and others in the frequency domain. Homogeneous diffraction is handled by means of the angular spectrum method. Ground is assumed perfectly flat and rigid. Due to the 3D aspect, the code was massively parallelized using the single program, multiple data paradigm with the Message Passing Interfaces (MPI) for distributed memory architectures. This allows us to handle problems in the order of a thousand billion mesh points in the four dimensions (3 dimensions of space plus time). The validity of the method has been thoroughly evaluated on many cases with known solutions: linear piston, scattering of plane wave by a heterogeneous sphere, propagation in a waveguide with a shear flow, scattering by a finite amplitude vortex and nonlinear propagation in a thermoviscous medium. This validation process allows for a detailed assessment of the advantages and limitations of the method. Finally, applications to atmospheric propagation of shock waves will be presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

IMAGING THE SOLAR TACHOCLINE BY TIME-DISTANCE HELIOSEISMOLOGY

The solar tachocline at the bottom of the convection zone is an important region for the dynamics of the Sun and the solar dynamo. In this region, the sound speed inferred by global helioseismology exhibits a bump of approximately 0.4% relative to the standard solar model. Global helioseismology does not provide any information on possible latitudinal variations or asymmetries between the northern and southern hemisphere. Here, we develop a time-distance helioseismology technique, including surface- and deep-focusing measurement schemes and a combination of both, for two-dimensional tomographic imaging of the solar tachocline that infers radial and latitudinal variations in the sound speed. We test the technique using artificial solar oscillation data obtained from numerical simulations. The technique successfully recovers major features of the simplified tachocline models. The technique is then applied to SOHO/MDI medium-l data and provides for the first time a full two-dimensional sound-speed perturbation image of the solar tachocline. The one-dimensional radial profile obtained by latitudinal averaging of the image is in good agreement with the previous global helioseismology result. It is found that the amplitude of the sound-speed perturbation at the tachocline varies with latitude, but it is not clear whether this is in part or fully an effect of instrumental distortion. Our initial results demonstrate that time-distance helioseismology can be used to probe the deep interior structure of the Sun, including the solar tachocline.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of magnetized prestellar cores with ambipolar diffusion and turbulence

We investigate the roles of magnetic fields and ambipolar diffusion during prestellar core formation in turbulent giant molecular clouds, using three-dimensional numerical simulations. Our simulations focus on the shocked layer produced by a converging large-scale flow and survey varying ionization and the angle between the upstream flow and magnetic field. We also include ideal magnetohydrodynamic (MHD) and hydrodynamic models. From our simulations, we identify hundreds of self-gravitating cores that form within 1 Myr, with masses M ∼ 0.04-2.5 M {sub ☉} and sizes L ∼ 0.015-0.07 pc, consistent with observations of the peak of the core mass function. Median values are M = 0.47 M {sub ☉} and L = 0.03 pc. Core masses and sizes do not depend on either the ionization or upstream magnetic field direction. In contrast, the mass-to-flux ratio does increase with lower ionization, from twice to four times the critical value. The higher mass-to-flux ratio for low ionization is the result of enhanced transient ambipolar diffusion when the shocked layer first forms. However, ambipolar diffusion is not necessary to form low-mass supercritical cores. For ideal MHD, we find similar masses to other cases. These masses are one to two orders of magnitude lower than the value M {sub mag,} {sub sph} = 0.007B {sup 3}/(G {sup 3/2}ρ{sup 2}) that defines a magnetically supercritical sphere under post-shock ambient conditions. This discrepancy is the result of anisotropic contraction along field lines, which is clearly evident in both ideal MHD and diffusive simulations. We interpret our numerical findings using a simple scaling argument that suggests that gravitationally critical core masses will depend on the sound speed and mean turbulent pressure in a cloud, regardless of magnetic effects.

79 ASTRONOMY AND ASTROPHYSICS↗

Radial drift of plasma blobs in a toroidal magnetic field with fully kinetic and reduced fluid models

Abstract In curved magnetic geometries, field-aligned regions of enhanced plasma pressure and density, termed ‘blobs,’ move as coherent filaments across the magnetic field lines. Coherent blobs account for a significant fraction of transport at the edges of magnetic fusion experiments and arise in naturally-occurring space plasmas. This work examines the dynamics of blobs with a fully kinetic electromagnetic particle-in-cell code and with a drift-reduced fluid code. In low-beta regimes with moderate blob speeds, good agreement is found in the maximum blob velocity between the two simulation schemes and simple analytical estimates. The fully kinetic code demonstrates that blob speeds saturate near the initial sound speed, which is a regime outside the validity of the reduced fluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Practical acoustic thermometry with twin-tube and single-tube sensors

Accurate measurement of high temperatures in a nuclear environment presents unique challenges. All secondary techniques inevitably drift because the thermometric materials in thermocouples and resistance sensors are sensitive not just to temperature, but also their own chemical and physical composition. The solution is to use primary methods that rely on fundamental links between measurable physical properties and temperature. In the nuclear field the best known technique is the measurement of Johnson Noise in a resistor (See Paper 80 at this conference). In this paper we describe the measurement of temperature in terms of the speed of sound in a gas confined in a tube - an acoustic waveguide. Acoustic thermometry is the most accurate technique of primary thermometry ever devised with the best uncertainty of measurement below 0.001 C. In contrast, the acoustic technique described in this work has a much larger uncertainty, approximately 1 deg. C. But the cost and ease of use are improved by several orders of magnitude, making implementation eminently practical. We first describe the basic construction and method of operation of thermometers using twin-tubes and single tubes. We then present results using a twin-tube design showing that showing long term stability (i.e. no detectable drift) at 700 deg. C over periods of several weeks. We then outline how the technique may be developed for different nuclear applications. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermodynamic properties of mesoscale convective systems observed during BAMEX

Dropsonde observations from the Bow-echo and Mesoscale convective vortex EXperiment (BAMEX) are used to document the spatio-temporal variability of temperature, moisture and wind within mesoscale convective systems (MCSs). Onion type sounding structures are found throughout the stratiform region of MCSs but the temperature and moisture variability is large. Composite soundings were constructed and statistics of thermodynamic variability were generated within each sub-region of the MCS. The calculated air vertical velocity helped identify subsaturated downdrafts. We found that lapse rates within the cold pool varied markedly throughout the MCS. Layered wet bulb potential temperature profiles seem to indicate that air within the lowest several km comes from a variety of source regions. We also found that lapse rate transitions across the 0 C level were more common than isothermal, melting layers. We discuss the implications these findings have and how they can be used to validate future high resolution numerical simulations of MCSs.

54 ENVIRONMENTAL SCIENCES↗

Radial drift of plasma blobs in a toroidal magnetic field with fully kinetic and reduced fluid models

In curved magnetic geometries, field-aligned regions of enhanced plasma pressure and density, termed ‘blobs,’ move as coherent filaments across the magnetic field lines. Coherent blobs account for a significant fraction of transport at the edges of magnetic fusion experiments and arise in naturally-occurring space plasmas. This work examines the dynamics of blobs with a fully kinetic electromagnetic particle-in-cell code and with a drift-reduced fluid code. In low-beta regimes with moderate blob speeds, good agreement is found in the maximum blob velocity between the two simulation schemes and simple analytical estimates. The fully kinetic code demonstrates that blob speeds saturate near the initial sound speed, which is a regime outside the validity of the reduced fluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Subsonic and supersonic jets and supersonic suppressor characteristics

Convergent and parallel flow nozzles were used with room temperature air to investigate the flow and acoustic characteristics over a Mach number range of 0.6 to 1.5. For subsonic jets the maximum sound pressure levels occurred at 19.1 from the axis and the sound pressure level decreased monotonically with increasing angle. But for supersonic jets the sound pressure was nearly constant over most of angular positions. The power spectra for subsonic jets were similar with the peak occurring at 4 KHz and for a Mach 1.4 jet the peak occurred at 5 KHz. Near field sound pressure level distributions were quite similar for subsonic jets, but for supersonic jets the distributions were quite different. Mean and fluctuating velocity contours were determined for a convergent nozzle with the impact and piezoelectric impact pressure gage probes for Mach numbers of 0.6 to 1.4. A supersonic suppressor of 191 tubes and shrouds was investigated at Mach numbers of 1.4 and 0.7.

Nagamatsu, H. T.↗

An analytical study of noise generation by subsonic flows in the presence of rigid surfaces

A general analytical method is developed for determination of the radiated noise field from highly sheared, subsonic flows in the presence of rigid surfaces. The method is specifically formulated to use measurable flow field properties as the basis input data for calculations. The governing equations of a viscous, incompressible fluid are employed to determine approximately the so-called shear noise source strength distribution in the flow. Mean rates of strain and fluctuating velocity covariances are the fundamental input data for calculations. The method is applied to the wall jet region of a circular jet impinging at 45 deg to an infinite plane surface. Velocity field measurements of Foss are used to describe the required flow properties. Comparisons of calculated results with measured surface pressures and sound pressure levels are given and discussed.

Wooley, J. P.↗

Reflection and radiation due to a quadrupole near a fluid interface

The reflection of sound at an interface between two fluid half-space in relative motion (one in motion and the other at rest), but with different density and different sound speed, is considered. The reflection coefficient is found in an explicitly closed form. A brief discussion of the effect of mean velocity, i.e., corresponding Mach number on different noise generating quadrupole directivities concludes the presentation of the paper. The graphs provided illustrate this aspect in a rather more convincing way.

Dash, R.↗

DISPERSAL OF PROTOPLANETARY DISKS BY CENTRAL WIND STRIPPING

We present a model for the dispersal of protoplanetary disks by winds from either the central star or the inner disk. These winds obliquely strike the flaring disk surface and strip away disk material by entraining it in an outward radial-moving flow at the wind-disk interface, which lies several disk scale heights above the midplane. The disk dispersal time depends on the entrainment velocity, v{sub d} = {epsilon}c{sub s} , at which disk material flows into this turbulent shear layer interface, where {epsilon} is a scale factor and c{sub s} is the local sound speed in the disk surface just below the entrainment layer. If {epsilon} {approx} 0.1, a likely upper limit, the dispersal time at 1 AU is {approx}6 Myr for a disk with a surface density of 10{sup 3} g cm{sup -2}, a solar mass central star, and a wind with an outflow rate M-dot{sub w}=10{sup -8}M{sub odot}yr{sup -1} and terminal velocity v{sub w} = 200kms{sup -1}. When compared with photoevaporation and viscous evolution, wind stripping can be a dominant mechanism only for the combination of low accretion rates ({approx}<10{sup -8} M{sub sun} yr{sup -1}) and wind outflow rates approaching these accretion rates. This case is unusual since generally outflow rates are {approx}<0.1 of accretion rates.

99 GENERAL AND MISCELLANEOUS↗

Anisotropic formation of magnetized cores in turbulent clouds

In giant molecular clouds (GMCs), shocks driven by converging turbulent flows create high-density, strongly magnetized regions that are locally sheetlike. In previous work, we showed that within these layers, dense filaments and embedded self-gravitating cores form by gathering material along the magnetic field lines. Here, we extend the parameter space of our three-dimensional, turbulent MHD core formation simulations. We confirm the anisotropic core formation model we previously proposed and quantify the dependence of median core properties on the pre-shock inflow velocity and upstream magnetic field strength. Our results suggest that bound core properties are set by the total dynamic pressure (dominated by large-scale turbulence) and thermal sound speed c{sub s} in GMCs, independent of magnetic field strength. For models with a Mach number between 5 and 20, the median core masses and radii are comparable to the critical Bonnor–Ebert mass and radius defined using the dynamic pressure for P{sub ext}. Our results correspond to M{sub core}=1.2c{sub s}{sup 4}(G{sup 3}ρ{sub 0}v{sub 0}{sup 2}){sup −1/2} and R{sub core}=0.34c{sub s}{sup 2}(Gρ{sub 0}v{sub 0}{sup 2}){sup −1/2} for ρ{sub 0} and v{sub 0}, the large-scale mean density and velocity. For our parameter range, the median M{sub core}∼0.1−1M{sub ⊙}, but a very high pressure cloud could have lower characteristic core mass. We find cores and filaments form simultaneously, and filament column densities are a factor of ∼2 greater than the surrounding cloud when cores first collapse. We also show that cores identified in our simulations have physical properties comparable to those observed in the Perseus cloud. Superthermal cores in our models are generally also magnetically supercritical, suggesting that the same may be true in observed clouds.

79 ASTRONOMY AND ASTROPHYSICS↗

High-speed Imaging of Global Surface Temperature Distributions on Hypersonic Ballistic-Range Projectiles

The NASA-Ames ballistic range provides a unique capability for aerothermodynamic testing of configurations in hypersonic, real-gas, free-flight environments. The facility can closely simulate conditions at any point along practically any trajectory of interest experienced by a spacecraft entering an atmosphere. Sub-scale models of blunt atmospheric entry vehicles are accelerated by a two-stage light-gas gun to speeds as high as 20 times the speed of sound to fly ballistic trajectories through an 24 m long vacuum-rated test section. The test-section pressure (effective altitude), the launch velocity of the model (flight Mach number), and the test-section working gas (planetary atmosphere) are independently variable. The model travels at hypersonic speeds through a quiescent test gas, creating a strong bow-shock wave and real-gas effects that closely match conditions achieved during actual atmospheric entry. The challenge with ballistic range experiments is to obtain quantitative surface measurements from a model traveling at hypersonic speeds. The models are relatively small (less than 3.8 cm in diameter), which limits the spatial resolution possible with surface mounted sensors. Furthermore, since the model is in flight, surface-mounted sensors require some form of on-board telemetry, which must survive the massive acceleration loads experienced during launch (up to 500,000 gravities). Finally, the model and any on-board instrumentation will be destroyed at the terminal wall of the range. For these reasons, optical measurement techniques are the most practical means of acquiring data. High-speed thermal imaging has been employed in the Ames ballistic range to measure global surface temperature distributions and to visualize the onset of transition to turbulent-flow on the forward regions of hypersonic blunt bodies. Both visible wavelength and infrared high-speed cameras are in use. The visible wavelength cameras are intensified CCD imagers capable of integration times as short as 2 ns. The infrared camera uses an Indium Antimonide (InSb) sensor in the 3 to 5 micron band and is capable of integration times as short as 500 ns. The projectiles are imaged nearly head-on using expendable mirrors offset slightly from the flight path. The proposed paper will discuss the application of high-speed digital imaging systems in the NASA-Ames hypersonic ballistic range, and the challenges encountered when applying these systems. Example images of the thermal radiation from the blunt nose of projectiles flying at nearly 14 times the speed of sound will be given.

Wilder, Michael C.↗

Synchronized vortex shedding and sound radiation from two side-by-side rectangular cylinders of different cross-sectional aspect ratios

Synchronized vortex shedding from two side-by-side cylinders and the associated sound radiation were examined experimentally at Reynolds numbers of the order of 10{sup 4} in low-Mach-number flows. In addition to a pair of square cylinders, a pair of rectangular cylinders, one with a square cross section (d × d) and the other with a rectangular cross section (d × c) having a cross-sectional aspect ratio (c/d) of 1.2–1.5, was considered. The center-to-center distance between the two cylinders L/d was 3.6, 4.5, and 6.0; these settings were within the non-biased flow regime for side-by-side square cylinders. In case of a square cylinder pair, anti-phase synchronized vortex shedding occurring for L/d = 3.6 and 4.5 generated a quadrupole-like sound source which radiated in-phase, planar-symmetric sound in the far field. Synchronized vortex shedding from the two rectangular cylinders with different c/d also occurred with almost the same frequency as the characteristic frequency of the square-cylinder wake in the case of the small center-to-center distance, L/d = 3.6, for all the cylinder pairs examined. The synchronized sound field was anti-phase and asymmetric in amplitude, unlike the case of a square cylinder pair. For larger spacing L/d = 4.5, synchronized vortex shedding and anti-phase sound still occurred, but only for close cross-sectional aspect ratios (c/d = 1.0 and 1.2), and highly modulated sound was radiated with two different frequencies due to non-synchronized vortex shedding from the two cylinders for larger differences in c/d. It was also found that when synchronized vortex shedding occurred, near-wake velocity fluctuations exhibited high spanwise-coherency, with a very sharp spectral peak compared with the single-cylinder case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗