Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space frames”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

First Time-Resolved Leader Spectra Associated With a Downward Terrestrial Gamma-Ray Flash Detected at the Telescope Array Surface Detector

Optical emissions associated with Terrestrial Gamma ray Flashes (TGFs) have recently become important subjects in space-based and ground-based observations as they can help us understand how TGFs are produced during thunderstorms. In this paper, we present the first time-resolved leader spectra of the optical component associated with a downward TGF. The TGF was observed by the Telescope Array Surface Detector (TASD) simultaneously with other lightning detectors, including a Lightning Mapping Array (LMA), an INTerFerometer (INTF), a Fast Antenna (FA), and a spectroscopic system. The spectroscopic system recorded leader spectra at 29,900 frames per second (33.44 μs time resolution), covering a spectral range from 400 to 900 nm, with 2.1 nm per pixel. The recordings of the leader spectra began 11.7 ms before the -18 kA return stroke and at a height of 2.37 km above the ground. These spectra reveal that optical emissions of singly ionized nitrogen and oxygen occur between 167 μs before and 267 μs after the TGF detection, while optical emissions of neutrals (H I, 656 nm; N I, 744 nm, and O I, 777 nm) occur right at the moment of the detection. The time-dependent spectra reveal differences in the optical emissions of lightning leaders with and without downward TGFs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

BOSS quasar outflows traced by C iv

ABSTRACT We investigate possible factors that drive fast quasar outflows using a sample of 39 249 quasars at median redshift 〈z〉 ≈ 2.17. Unique to this study, the quasar redshifts are re-measured based on the Mg ii emission line, and explore unprecedented outflow velocities (>6000 km s−1), while maintaining statistical significance. We measure reliable C iv blueshifts for 1178 quasars with velocities >2500 km s−1. From those, 255(13) quasars have blueshifts above 4000(6000) km s−1, with the highest C iv velocity ≈7000 km s−1. Several correlations are observed, where higher C iv blueshifts in general are in quasars with broader, weaker C iv emission profiles, weak He ii emission, larger Eddington ratios, and bluer ultraviolet (UV) continuum slope across the rest-frame UV to near-infrared. Analysis reveals two primary factors contributing to faster outflows: higher Eddington ratios, and softer far-UV continuum (hν >24.6 eV). We find supporting evidence that radiative line driving may generate extreme outflow velocities, influenced by multiple factors as suggested by the aforementioned correlations. This evidence highlights the importance of considering a multidimensional parameter space in future studies when analyzing large C iv blueshifts to determine the fundamental causes of outflows.

Gillette, Jarred (ORCID:0000000185284839)↗
DOE OSTI2023

Lieb-Schultz-Mattis, Luttinger, and 't Hooft - anomaly matching in lattice systems

We analyze lattice Hamiltonian systems whose global symmetries have ’t Hooft anomalies. As is common in the study of anomalies, they are probed by coupling the system to classical background gauge fields. For flat fields (vanishing field strength), the nonzero spatial components of the gauge fields can be thought of as twisted boundary conditions, or equivalently, as topological defects. The symmetries of the twisted Hilbert space and their representations capture the anomalies. We demonstrate this approach with a number of examples. In some of them, the anomalous symmetries are internal symmetries of the lattice system, but they do not act on-site. (We clarify the notion of “on-site action.”) In other cases, the anomalous symmetries involve lattice translations. Using this approach we frame many known and new results in a unified fashion. In this work, we limit ourselves to 1+1d systems with a spatial lattice. In particular, we present a lattice system that flows to the c=1 c = 1 compact boson system with any radius (no BKT transition) with the full internal symmetry of the continuum theory, with its anomalies and its T-duality. As another application, we analyze various spin chain models and phrase their Lieb-Shultz-Mattis theorem as an ’t Hooft anomaly matching condition. We also show in what sense filling constraints like Luttinger theorem can and cannot be viewed as reflecting an anomaly. As a by-product, our understanding allows us to use information from the continuum theory to derive some exact results in lattice model of interest, such as the lattice momenta of the low-energy states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1971

Spaceborne electronic imaging systems

Criteria and recommended practices for the design of the spaceborne elements of electronic imaging systems are presented. A spaceborne electronic imaging system is defined as a device that collects energy in some portion of the electromagnetic spectrum with detector(s) whose direct output is an electrical signal that can be processed (using direct transmission or delayed transmission after recording) to form a pictorial image. This definition encompasses both image tube systems and scanning point-detector systems. The intent was to collect the design experience and recommended practice of the several systems possessing the common denominator of acquiring images from space electronically and to maintain the system viewpoint rather than pursuing specialization in devices. The devices may be markedly different physically, but each was designed to provide a particular type of image within particular limitations. Performance parameters which determine the type of system selected for a given mission and which influence the design include: Sensitivity, Resolution, Dynamic range, Spectral response, Frame rate/bandwidth, Optics compatibility, Image motion, Radiation resistance, Size, Weight, Power, and Reliability.

Source record↗
NASA NTRS1978

A simple method for obtaining a three-dimensional proton distribution function from Voyager plasma data

The main sensor of the Vogager plasma experiment consists of a cluster of three, modulated-grid Faraday cups whose normals are arranged symmetrically about the symmetry axis of the cluster at an angle of 20 degrees to that axis. In interplanetary space, each cup explores the positive ion distribution by accepting particles from contiguous slices in velocity space. The slices are narrow in the direction of the normal to the modulating grid but are broad in planes parallel to that grid. The resulting three sets of measurements can be combined to yield the three-dimensional distribution function in the following way: the distribution function is assumed to be gyrotropic. For each value of speed in a frame of reference moving with the bulk velocity of the solar wind, the variation of the distribution function with angle from the field direction is represented by a series of Legendre polynomials. Effects such as double-streaming and heat flow can be well represented by using only the first three terms of the series which are fully specified by the measurements. Examples of the use of this method in the analysis of Voyager data are shown.

Olbert, S.↗
NASA NTRS1987

The use of satellites in non-goestationary orbits for unloading geostationary communication satellite traffic peaks. Volume 2: Technical report

The part of the geostationary (GEO) orbital arc used for United States domestic fixed, communications service is rapidly becoming filled with satellites. One of the factors currently limiting its utilization is that communications satellites must be designed to have sufficient capacity to handle peak traffic leads, and thus are under utilized most of the time. A solution is to use satellites in suitable non-geostationary orbits to unload the traffic peaks. Three different designs for a non-geostationary orbit communications satellite system are presented for the 1995 time frame. The economic performance is analyzed and compared with geostationary satellites for two classes of service, trunking and customer premise service. The result is that the larger payload of the non-geostationary satellite offsets the burdens of increased complexity and worse radiation environment to give improved economic performance. Depending on ground terminal configuration, the improved economic performance of the space segment may be offset by increased ground terminal expenses.

Price, K.↗
NASA NTRS1990

Wave-interactions in supersonic and hypersonic flows

Work completed under the current grant comprises the start of a theoretical and computational attack on the subharmonic route to secondary instabilities in compressible flows. The total flow field in this problem is made up of the following components: (1) a steady streamwise mean boundary layer flow which depends only on the normal space component y; (2) a two-dimensional time dependent T-S wave which moves with wavespeed c and has no spanwise dependence; and (3) a fully three-dimensional, time dependent T-S wave whose streamwise wavenumber is half of the streamwise wavenumber associated with the two-dimensional T-S wave in b. If a frame of reference is adopted which moves with the wavespeed c of the 2-D T-S wave, the time dependence of this portion of the flow can be eliminated. The effective steady mean flow in this problem is now the sum of the original parallel steady mean flow and the initial 2-D T-S instability. Dependence on the streamwise coordinate x in this mean flow can be extracted by assuming normal mode expansions involving complex exponentials and the streamwise wavenumber a. However, it is important to note that, because this is a wave-wave interaction problem, unlike the usual linear instability case, both the complex exponential, and its complex conjugate, must be retained in describing the 2-D T-S wave. The role of the perturbation to the steady mean flow is now played by the 3-D time dependent T-S wave. In treating this wave, normal modes in the streamwise and spanwise directions and time may be used. Consistent with the subharmonic nature of this transition route, the streamwise wavenumber is a/2, and complex conjugates of the complex exponential must be employed. This is not the case with the modes giving z and t dependence with wavespeed o and spanwise wavenumber B as the effective mean flow quantities are independent of z and their time dependence is accounted for by the moving frame of reference. Consequently, the wave-wave interaction which will produce mean flow modification occurs only through the streamwise exponentials.

Lakin, William D.↗
NASA NTRS1994

Flatfielding and photometric accuracy of the first Hubble Space Telescope Wide Field Camera

Long exposures with the original Hubble Space Telescope (HST) Wide Field Camera (WFC) through the F555W and F785LP filters show gradients in the background following standard pipeline calibration. We show that these gradients also appear in stellar photometry, and thus must be predominantly the result of inaccurate flatfielding at a level of 10 to 20%. Color errors may be even larger. Applying corrections to the flatfield frames based on the background structure leads to an improved accuracy of approximately 4% for single-measurement photometry within a single CCD chip, compared to the approximately 10% accuracy suggested by previous studies. We have reanalyzed the F555W and F785LP calibration photometry to derive zero points appropriate for corrected data; these new zero points have internal consistency at a level of approximately 1.2%, based on comparison between the chip-to-chip offsets and the sky levels observed in corrected images. This indicates that relative photometry approaching 1 to 2% is achievable with the WFC. The new zero point values for corrected data are 22.90, 23.04, 23.04, and 22.96 (F555W), and 21.56, 21.64, 21.44, and 21.47 (F785LP) for chips WF1-WF4, respectively. Comparison is made with other zero points, and the applicability of 'delta flats' is briefly discussed.

Phillips, Andrew C.↗
NASA NTRS2005

Tether Technologies for Future Space Applications

This viewgraph presentation provides information on several types of spacecraft tethers, and possible applications for them. The tethers profiled include: 1) Mechanical tethers; 2) Electrodynamic (ED) tethers; 3) Momentum eXchange Electrodynamic Reboost (MXER) tethers; 4) Synergistic technologies. Tethers can have low Earth orbit (LEO), lunar, and interplanetary applications.

Frame, Kyle L.↗
NASA NTRS2009

Right Ventricular Tissue Doppler in Space Flight

Tissue Doppler (TD) registers movement of a given sample of cardiac tissue throughout the cardiac cycle. TD spectra of the right ventricle (RV) were obtained from a long-duration ISS crewmember as a portion of an ongoing experiment ("Braslet" test objective). To our knowledge, this is the first report of RV TD conducted in space flight, and the data represent reproducibility and fidelity of this application in space and serve as the first "space normal" data set. Methods RV TD was performed by astronaut scientists remotely guided by an ultrasound expert from Mission Control Center, Houston, TX. In four of the subjects, RV TD was acquired from the free wall near the tricuspid annulus in two separate sessions 4 to 7 days apart. A fifth subject had only one session. All digital DICOM frames were exported for off-line analysis. Systolic (S ), early diastolic (E ) and late diastolic (A ) velocities were measured. RV Tei-index was calculated using diastolic and systolic time intervals as a combined measure of myocardial performance. Results and Discussion The mean values from the first 4 subjects (8 sessions) were used as the on-orbit reference data, and subject 5 was considered as a hypothetical patient for comparison (see Table). The greatest difference was in the early diastolic A (31 %) yet the standard deviation (a) for A amongst the reference subjects was 2.25 (mean = 16.02). Of interest is the Tei index, a simple and feasible indicator of overall ventricular function; it was similar amongst all the subjects. The late diastolic A seems to compensate for the variance in E . Normal Tei index for the RV is < 0.3, yet our data show all but one subject consistently above this level, notwithstanding their nominal responses to daily exercise in microgravity. These data remind us that the physiology of RV preload in altered gravity environments is still not completely understood.

Hamilton, Douglas R.↗
NASA NTRS2004

Self-Inflatable/Self-Rigidizable Reflectarray Antenna

A report describes recent progress in a continuing effort to develop large reflectarray antennas to be deployed in space. Major underlying concepts were reported in two prior NASA Tech Briefs articles: Inflatable Reflectarray Antennas (NPO- 20433), Vol. 23, No. 10 (October 1999), page 50 and Tape-Spring Reinforcements for Inflatable Structural Tubes (NPO-20615), Vol. 24, No. 7 (July 2000), page 58. To recapitulate: An antenna as proposed would include a reflectarray membrane stretched flat on a frame of multiple tubular booms that would be deployed by inflation. The instant report discusses design concepts and relevant basic mechanical principles. Among the concepts are alternative configurations of booms for holding the reflectarray membrane and its radio-frequency feed horn and the use of catenaries and constant-force springs to stretch the reflectarray membrane on the frame at the required tension. Some emphasis is placed on the need to keep the deployed frame rigid without depending on maintenance of inflation in the presence of impinging micrometeors that could cause leaks: for this purpose, the booms could be made as spring-tape-reinforced aluminum laminate tubes like those described in the second-mentioned prior article.

Fang, Houfei↗
DOE OSTI2017

The Lyman Continuum Escape Fraction of Emission Line-selected z ∼ 2.5 Galaxies Is Less Than 15%

Recent work suggests that strong emission line, star-forming galaxies (SFGs) may be significant Lyman continuum leakers. We combine archival Hubble Space Telescope broadband ultraviolet and optical imaging (F275W and F606W, respectively) with emission line catalogs derived from WFC3 IR G141 grism spectroscopy to search for escaping Lyman continuum (LyC) emission from homogeneously selected z ∼ 2.5 SFGs. We detect no escaping Lyman continuum from SFGs selected on [O ii] nebular emission ( N = 208) and, within a narrow redshift range, on [O iii]/[O ii]. We measure 1 σ upper limits to the LyC escape fraction relative to the non-ionizing UV continuum from [O ii] emitters, f {sub esc} ≲ 5.6%, and strong [O iii]/[O ii] > 5 ELGs, f {sub esc} ≲ 14.0%. Our observations are not deep enough to detect f {sub esc} ∼ 10% typical of low-redshift Lyman continuum emitters. However, we find that this population represents a small fraction of the star-forming galaxy population at z ∼ 2. Thus, unless the number of extreme emission line galaxies grows substantially to z ≳ 6, such galaxies may be insufficient for reionization. Deeper survey data in the rest-frame ionizing UV will be necessary to determine whether strong line ratios could be useful for pre-selecting LyC leakers at high redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1985

Dynamic Thermophysical Measurements in Space

The objective is to develop techniques for the dynamic measurement of selected thermophysical properties (e.g., heat of fusion, heat capacity, electrical resistivity) of solids and liquids at temperatures above 2000 K in a near zero-gravity environment. The first phase involves establishing the stability (geometrical) limits of specimens when rapidly heated to temperatures beyond their melting point. A test equipment package was designed and constructed for this purpose, consisting of removable specimen cartridge cells, a battery-bank power supply, a high-speed framing camera, a single-wavelength pyrometer, and electronic switching and control equipment. The operation of the equipment package was tested in the laboratory in preparation for near zero-gravity experiments to be performed during a KC-135 flight in September, 1984.

Cezairliyan, A.↗
NASA NTRS1997

Line Emission from an Accretion Disk Around a Rotating Black Hole: Toward a Measurement of Frame Dragging

Line emission from an accretion disk and a corotating hot spot about a rotating black hole are considered for possible signatures of the frame-dragging effect. We explicitly compare integrated line profiles from a geometrically thin disk about a Schwarzschild and an extreme Kerr black hole, and show that the line profile differences are small if the inner radius of the disk is near or above the Schwarzschild stable-orbit limit of radius 6GM/sq c. However, if the inner disk radius extends below this limit, as is Possible in the extreme Kerr spacetime, then differences can become significant, especially if the disk emissivity is stronger near the inner regions. We demonstrate that the first three moments of a line profile define a three-dimensional space in which the presence of material at small radii becomes quantitatively evident in broad classes of disk models. In the context of the simple, thin disk paradigm, this moment-mapping scheme suggests formally that the iron line detected by the Advanced Satellite,for Cosmology and Astrophysics mission from MCG --6-30-15 (Tanaka et al.) is approximately 3 times more likely to originate from a disk about a rotating black hole than from a Schwarzschild system. A statistically significant detection of black hole rotation in this way may be achieved after only modest improvements in the quality of data. We also consider light curves and frequency shifts in line emission as a function of time for corotating hot spots in extreme Kerr and Schwarzschild geometries. The frequency-shift profile is a valuable measure of orbital parameters and might possibly be used to detect frame dragging even at radii approaching 6GM/sq c if the inclination angle of the orbital plane is large. The light curve from a hot spot shows differences as well, although these too are pronounced only at large inclination angles.

Bromley, Benjamin C.↗
DOE OSTI2025

Content-aware foveated camera for multi-target tracking

Modern image sensors deliver substantial space-time bandwidth, yet indiscriminate acquisition often overwhelms memory, computation, and downstream perception. We present a content-aware, multi-foveated camera that dynamically reallocates sensing and magnification to multiple regions of interest (ROIs). A phase-only spatial light modulator (SLM) serves as a solid-state, inertia-free beam-steering and lens element, enabling per-frame field-of-view (FOV) reconfiguration and content-aware target tracking. By interleaving frames across foveae, our system preserves a wide-FOV situational context while refreshing each ROI at high rates, thereby reducing data volume without degrading task performance. We constructed a prototype employing a single-SLM, single-sensor architecture and demonstrated its application in real-time multi-object tracking with dynamic ROI maintenance across multiple viewpoints. The approach offers a general pathway to integrate detection, tracking, and segmentation algorithms in the acquisition loop, shifting workload from post hoc processing to intelligent capture.

Zang, Zihan [Univ. of California, Los Angeles, CA ↗
DOE OSTI2024

A Skipper-CCD Light Shield for X-Ray Detection in Space

We present advancements in the design of Skipper-CCD sensors for X-ray detection in environments with high optical backgrounds, such as those expected in space. These packages incorporate a custom-made aluminum shield on the CCD surface that blocks over 99% of visible light while preserving the efficiency for keV X-rays. These features allow us to perform precise X-ray measurements in environments challenged by visible light interference. Furthermore, we briefly discuss the potential implementation of this design concept in frame-transfer CCDs, opening opportunities for broader applications and advancements in imaging technologies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

The cost of noise reduction in commercial tilt rotor aircraft

The relationship between direct operating cost (DOC) and departure noise annoyance was developed for commercial tilt rotor aircraft. This was accomplished by generating a series of tilt rotor aircraft designs to meet various noise goals at minimum DOC. These vehicles were spaced across the spectrum of possible noise levels from completely unconstrained to the quietest vehicle that could be designed within the study ground rules. A group of optimization parameters were varied to find the minimum DOC while other inputs were held constant and some external constraints were met. This basic variation was then extended to different aircraft sizes and technology time frames. It was concluded that reducing noise annoyance by designing for lower rotor tip speeds is a very promising avenue for future research and development. It appears that the cost of halving the annoyance compared to an unconstrained design is insignificant and the cost of halving the annoyance again is small.

Faulkner, H. B.↗
NASA NTRS1976

Thermal control systems for low temperature Shuttle payloads

Greater sensitivity and longer life for future space sensor systems place more stringent demands on cooling system technology. Results are presented for a study designed to determine and evaluate low-temperature thermal control system concepts for various cooling categories in the range 3-200 K and to generate hardware development plans for undeveloped viable system concepts. The study considered Shuttle launched payloads in the 1980-1991 time frame, with 1-5 yr of life. Cooling concepts are categorized as open-cycle (expendable), closed-cycle (mechanical), solid-state, and radiative. Particular attention is given to the concepts of multistage heat pipe radiator, diode heat pipe radiator, and radiator guarded cryostat. Results are given for parametric analyses of the Vuilleumier refrigerator, the rotary reciprocating refrigerator, the solid hydrogen refrigerator, the solid hydrogen/multistage radiator hybrid cooler, and the magneto-Peltier hybrid cooler.

Wright, J. P.↗