Search NASA⌕ Search

SEARCH · Search NASA

Results for “X-ray Powder Diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Effects of Mg Substitution on the Structural and Magnetic Properties of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} Nanoparticle Ferrites

Sol-gel auto-combustion is a method of preparing ferrite by combining combustion with chemical gel. In this study, Ni-Mg-Co ferrite powders are prepared by coprecipitation method, and the nanocrystals of Ni{sub 0.2}Mg{sub x}Co{sub 0.8−x}Fe{sub 2}O{sub 4} are successfully synthesized. The structure and magnetic properties of undoped and Mg-substituted Ni-Co ferrite nanoparticles are systematically investigated. The methods used to characterize the prepared samples are X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and Vibrating sample magnetometry (VSM). The synthesized samples are confirmed by XRD analysis to form a single-phase cubic spinel structure with crystals between 48 and 50 nm. With the increase of Mg ion concentration, the lattice constant decreases. The results of FTIR spectroscopy indicated that a spinel structure was formed. Transmission electron microscopy (TEM) images show spherical cubic microcrystals in the samples. EDX analysis confirms that the synthesized ferrite is pure phase structure, and Mg{sup 2+} is successfully replaced. With the increase of Mg{sup 2+} ion content, the saturation magnetization and remanent magnetization decreased from 70.16 to 39.77 emu/g and 36.40 to 20.20 emu/g at room temperature, respectively. Meanwhile, the coercivity decreases from 1032.16 to 378.50 Oe by increasing Mg{sup 2+} concentration. This also indicates that the Mg-substituted Ni-Co nano-ferrite has a low magnetic of multi-ferric material. The increasing of peak height of dM/dH at H{sub m} indicates that the cubic spinel structure sample has good crystallinity and magnetic stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical, Dielectric, and Magnetic Characteristics of Nd Ions Substituted BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub x}O{sub 19} M-Type Hexaferrite via Co-precipitation

Nanoparticles (NPs) of barium hexaferrite were synthesized by a chemical co-precipitation technique in an aqueous solution with a nominal composition of BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub 1−x}Nd{sub x}O{sub 19} (x = 0, 0.5, 1). XRD and FTIR analyses were performed to study the crystal structure of the magnetic powders (MPs) in order to obtain details on the hexaferrite structure. Grain morphology and elemental composition were assessed by SEM and EDS, respectively, and nano-sized hexagonal platelet-like structures in all MPs were demonstrated. All of the structural parameters such as “a”, “c”, V{sub (cell)} and D{sub x} have been altered with successful incorporation of Nd into hexagonal lattices, thereby the band gap E{sub g} first increased x ≤ 0.5 then decreased up to x = 1 (i.e., drawn via a Tauc plot) from 1.53–1.82 eV. The measurements of dielectric properties depict relaxation behavior at higher frequencies. The dielectric measurements increase with increased hexaferrite. Furthermore, the magnetic properties of all MPs were examined by VSM at room temperature (RT). The saturation magnetization (M{sub s}), remnant magnetization (M{sub r}), and coercivity (H{sub c}) were linearly decreased by the SnMg content, whereas an increasing trend appeared with the additional Nd content. However, the squareness ratio increased with an increase in the content (x). These outcomes make this substitution an excellent candidate for multiple applications such as optical, electrical-based devices, circulators, and recording materials. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Morphological, Electrical and Magnetic Properties of Yttrium-Substituted Co-Zn Ferrites Synthesized by Double Sintering Technique

A series of rare earth Y{sup 3+} ion substituted Co-Zn ferrites Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) have been synthesized by conventional double sintering technique from the oxide powders of Co, Zn, Fe, and Y. The XRD, FESEM, EDS, DC resistivity, dielectric measurements, VSM, and Curie temperature (T{sub c}) analysis have been used to investigate structural, morphological, electrical, and magnetic properties. Single phase of cubic spinel structure has been confirmed up to x < 0.06, and a small amount of secondary phase YFeO{sub 3} has also been detected for x > 0.06. The lattice parameter initially decreases than increases with yttrium concentrations. The FESEM image shows that the grains and grain boundaries are distinct and uniformly distributed and the purity has also been endorsed from the EDS spectra. The average grain size decreases at x = 0.02 and then increases with Y substitution. The long range mobility of charge carriers and presence of localized charge carriers with retreat from the Debye-like behavior in the compositions have been explored using electric modulus and impedance. The magnetic strength diminishes owing to existence of magnetic dilution in the A-B interactions subsequent to the T{sub c} declines with the x contents. The value of saturation magnetization decreases with increasing Y{sup 3+} contents that indicates that the domain wall motion become tougher due to substitution of foreign ions Y{sup 3+} that possess larger ionic radius. Therefore, the Y{sup 3+} substituted Co{sub 0.5}Zn{sub 0.5}Y{sub x}Fe{sub 2-x}O{sub 4} (x = 0.00 to 0.08 in step of 0.02) ferrites with high resistivity and low losses has implications to be used in high frequency and power supply devices applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid State Reduction Driven Synthesis of Mn Containing Multi-principal Component Alloys

In recent years, high entropy alloys (HEAs), also known as multi-principal component alloys (MPCAs) have emerged as a new and exciting class of materials. This paper reports on the solid state reduction synthesis of a series of CoFeNiMn-based MPCA compositions, starting from a mixture of the corresponding oxides. One of the aims of the study was to test whether the degree of reduction of MnO, a highly stable oxide, could be enhanced by tailoring the alloy composition. Specifically, the influence of Ni content was studied because Ni exhibits a significant negative enthalpy of mixing with Mn. High purity precursor powders of Co(OH) 2 , Fe 2 O 3 , MnO 2 , and NiO were milled and mixed using standard ceramic processing methods. Here, the nominal sample compositions (assuming complete oxide reduction) were (CoFeMn) x Ni (1-x) , for x = 0, 0.083, 0.166, and 0.25. The oxide samples were subjected to a series of isothermal reduction anneals in flowing 3 pct H 2 –Ar at 1100 °C. The resulting microstructures were characterized using scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The composition of the resulting MPCAs was determined quantitatively using wavelength dispersive spectroscopy (WDS) in the electron microprobe. The study revealed that for each of the initial oxide compositions studied, it was possible to achieve an MPCA with ~ 25 at. pct Mn. These results were found to be consistent with the predictions of a thermodynamic model whereby a negative enthalpy of mixing (ΔH mix ), combined with a contribution from configurational entropy, can offset a positive free energy of reduction (ΔG red ). The incorporation of vibrational entropy into first principles calculations was found to have a significant effect on the predicted crystal structure of the MPCAs.

36 MATERIALS SCIENCE↗

Investigation of Compatibility Between M-Cr-Al-X Thermal Spray Coatings and Third Generation γ-TiAl Alloys

In this work, the physical and chemical compatibility of cast Ti-Al-Nb-Cr-Zr and Ti-Al-Nb-Cr-Zr-B-La alloys was investigated with oxidation-resistant M-Cr-Al-X thermal spray coatings. Ti and Al are main alloy elements to form γ-TiAl and α{sub 2}-Ti{sub 3}Al phases. To obtain coatings, we used air plasma spray and high-velocity oxygen fuel equipment. Four commercially available M-Cr-Al-X powders, including Ta-containing, were used as starting materials. Our investigation of compatibility between M-Cr-Al-X thermal spray coatings and γ-TiAl alloys consists of isothermal annealing in air muffle furnace during 100 h at 920 °C, followed by samples investigation. Oxidation products formed at coatings surface were studied by XRD analysis with Rietveld refinement. Interdiffusion between coatings and alloys was studied by means of cross-sectional SEM with EDX analysis. Plots were made to show concentration of each main element at the end of experiments. Samples were subjected to dynamic mechanical thermal analysis in order to determine the effect of high-temperature exposure on complex elastic modulus. Finally, burner rig cycling test was performed to estimate the thermal shock resistance of M-Cr-Al-X coatings.

36 MATERIALS SCIENCE↗

A Study on the Microstructures and Properties of Selective Laser Melted Babbitt Metals

Babbitt metal cubes were prepared by means of selected laser melting (SLM) process using Sn—11% Sb—6% Cu alloy powders; their microstructures were studied using optical microscope (OM), SEM, EDS, XRD and DSC; and their mechanical properties were tested using Vickers hardness and tensile methods. The results show that fully dense Babbitt metal components can be prepared by using appropriate SLM process parameters and an interlayer staggered laser scanning strategy. Anisotropy characteristics appear in both the microstructure and mechanical properties of SLM-Babbitt cubic specimens. The average hardness was in the range of 32.5 HV0.05 to 35.3 HV0.05. Both tensile strength and elongation were somewhat higher in a direction parallel to the laser scanning speed (Y axis) than in a direction perpendicular to the laser scanning speed (X axis). The strengthening mechanism is suggested to include solid solution strengthening of oversaturated Sb in the Sn matrix, as well as dispersion strengthening of finely dispersed SnSb and Cu{sub 6}Sn{sub 5} particles. The overgrown acicular Cu{sub 6}Sn{sub 5} phases at low laser scanning speeds and void formation at higher laser scanning speeds seriously deteriorate the mechanical properties of the SLM-Babbitt specimens.

36 MATERIALS SCIENCE↗

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets

We investigate La-site substitution in the high-entropy garnet Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 (LLZNTH) using Ba2+, Sr2+, and Sm3+ to elucidate how dopant governs phase stability, Li-site distribution, and electrochemical behavior. X-ray diffraction shows that Sr2+ is incorporated homogeneously into the garnet lattice, whereas the larger Ba2+ and smaller Sm3+ ions partially exceed the structural tolerance, generating secondary phases. Nevertheless, the Sm-doped composition (x = 0.05) exhibits the highest room-temperature ionic conductivity (2.7 × 10–4 S cm–1). Neutron powder diffraction reveals that Sm substitution drives a redistribution of Li+ from the tetrahedral 24 d sites into the higher-mobility 96 h positions, enhancing the connectivity of the three-dimensional Li-ion migration network. A Sm-doping series (x = 0.01–0.05) further shows that only sufficiently high Sm levels induce this redistribution, whereas lower concentrations retain Li arrangements similar to the undoped garnet. Critical current density measurements demonstrate that La-site dopants also influence interfacial stability against Li metal, underscoring a trade-off between bulk transport enhancement and mechanical robustness. Collectively, these findings reveal that in high-entropy garnets improved ionic conductivity can originate not only from phase-pure structures but also from targeted modification of the Li sublattice, even when accompanied by secondary phases, offering a compositional design principle for garnet electrolytes.

Li, Chang [Mechanical Engineering, School of Scien↗

Synthesis and Properties of the Helium Clathrate and Defect Perovskite [He 2– x $^\square$ x ][CaNb]F 6

The defect double perovskite [He 2– x $^\square$ x ][CaNb]F 6 , with helium on its A-site, can be prepared by the insertion of helium into ReO 3 -type CaNbF 6 at high pressure. Upon cooling from 300 to 100 K under 0.4 GPa helium, ~60% of the A-sites become occupied. Helium uptake was quantified by both neutron powder diffraction and gas insertion and release measurements. After the conversion of gauge pressure to fugacity, the uptake of helium by CaNbF 6 can be described by a Langmuir isotherm. The enthalpy of absorption for helium in [He 2– x $^\square$ x ][CaNb]F 6 is estimated to be ~+3(1) kJ mol –1 , implying that its formation is entropically favored. Helium is able to diffuse through the material on a time scale of minutes at temperatures down to ~150 K but is trapped at 100 K and below. The insertion of helium into CaNbF 6 reduces the magnitude of its negative thermal expansion, increases the bulk modulus, and modifies its phase behavior. On compressing pristine CaNbF 6 , at 50 and 100 K, a cubic (Fm$\overline{3}$m) to rhombohedral (R$\overline{3}$) phase transition was observed at <0.20 GPa. However, a helium-containing sample remained cubic at 0.4 GPa and 50 K. CaNbF 6 , compressed in helium at room temperature, remained cubic to >3.7 GPa, the limit of our X-ray diffraction measurements, in contrast to prior reports that upon compression in a nonpenetrating medium, a phase transition is detected at ~0.4 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Chemical Evolution of an Inverse CeO x /Cu Catalyst under CO 2 Hydrogenation: Tunning Oxide Morphology to Improve Activity and Selectivity

Small nanoparticles of ceria deposited on a powder of CuO display a very high selectivity for the production of methanol via CO 2 hydrogenation. CeO 2 /CuO catalysts with ceria loadings of 5%, 20%, and 50% were investigated. Among these, the system with 5% CeO x showed the best catalytic performance at temperatures between 200 and 350 °C. The evolution of this system under reaction conditions was studied using a combination of environmental transmission electron microscopy (E-TEM), in situ X-ray absorption spectroscopy (XAS), and time-resolved X-ray diffraction (TR-XRD). For 5% CeO x /Cu, the in situ studies pointed to a full conversion of CuO into metallic copper, with a complete transformation of Ce 4+ into Ce 3+ . Images from E-TEM showed drastic changes in the morphology of the catalyst when it was exposed to H 2 , CO 2 , and CO 2 /H 2 mixtures. Under a CO 2 /H 2 feed, there was a redispersion of the ceria particles that was detected by E-TEM and in situ TR-XRD. Finally, these morphological changes were made possible by the inverse oxide/metal configuration and facilitate the binding and selective conversion of CO 2 to methanol.

03 NATURAL GAS↗

Tuning the flat bands of the kagome metal CoSn with Fe, In, or Ni doping

We report CoSn is a Pauli paramagnet with relatively flat d bands centered about 100 meV below the Fermi energy, E F . Single crystals of CoSn lightly doped with Fe, In, or Ni are investigated using x-ray and neutron scattering, magnetic susceptibility and magnetization, AC susceptibility, specific heat, and resistivity measurements. Within the rigid-band approximation, hole doping with a few percent of Fe or In should move the flat bands closer to E F , whereas electron doping with Ni should move the flat bands further away from E F . We provide evidence that this indeed occurs. Fe and In doping drive CoSn toward magnetism, while Ni doping suppresses CoSn's already weak magnetic response. The resulting ground state is different for Fe versus In doping. For Fe-doped crystals, Co 1-x Fe x Sn, with 0.02< x <0.27, the magnetic and specific-heat data are consistent with the formation of a spin glass, with a glass temperature, T g , ranging from 1 K for x = 0.02 to 10 K for x = 0.27. Powder and single-crystal neutron diffraction found no evidence of long-range magnetic order below T g for samples with x ≈ 0.17. For In-doped crystals, CoSn 1-y In y , both the magnetic susceptibility and the Sommerfeld coefficient, γ, increase substantially relative to pure CoSn, but with no clear indication of a magnetic transition for 0.05< y <0.2. CoSn crystals doped with Ni (Co 0.93 Ni 0.07 Sn) have a significantly smaller magnetic susceptibility and γ than pure CoSn, consistent with flat bands further from E F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and behavior of bulk iron nitride soft magnets via high-pressure spark plasma sintering

Abstract In this study, dense bulk iron nitrides (Fe x N) were synthesized for the first time ever using spark plasma sintering (SPS) of Fe x N powders. The Fe 4 N phase of iron nitride in particular has significant potential to serve as a new soft magnetic material in both transformer and inductor cores and electrical machines. The density of SPSed Fe x N increased with SPS temperature and pressure. The microstructure of the consolidated bulk Fe x N was characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRD revealed a primary phase of Fe 4 N with secondary phases of Fe 3 N and metallic iron. Finite element analysis (FEA) was also applied to investigate and explain localized heating and temperature distribution during SPS. The effects of processing on interface bonding formation and phase evolution were investigated and discussed in detail to provide insight into fundamental phenomena and microstructural evolution in SPSed Fe x N. Graphic abstract

36 MATERIALS SCIENCE↗

Electron-hole asymmetry in the phase diagram of carrier-tuned CsV3Sb5

In this work, we study the effect of electron doping on the kagome superconductor CsV 3 Sb 5 . Single crystals and powders of CsV 3 Sb 5− x Te x are synthesized and characterized via magnetic susceptibility, nuclear quadrupole resonance, and x-ray diffraction measurements, where we observe a slight suppression of the charge density wave transition temperature and superconducting temperature with the introduction of electron dopants. In contrast to hole doping, both transitions survive relatively unperturbed up to the solubility limit of Te within the lattice. A comparison is presented between the electronic phase diagrams of electron- and hole-tuned CsV 3 Sb 5 .

36 MATERIALS SCIENCE↗

Specimen Holder Design Improves Accuracy of X-Ray Powder Analysis

Specimen holder for X ray diffraction analysis presents the specimen to the incident X rays in a curvature. This permits the use of an X ray beam having a larger divergence angle, the beam intensity is increased, and the statistical accuracy of analysis is improved.

Mack, M.↗

Effect of magnesium oxide content on oxidation behavior of some superalloy-base cermets

The effect of increasing magnesium oxide (MgO) content on the cyclic oxidation resistance of hot-pressed cermets of MgO in NiCrAlY, MgO in Hoskins-875, MgO in Inconel-702, and MgO in Hastelloy-X was investigated. The cermets with magnesium oxide levels of 5, 10, 20, and 40 vol percent were examined. The cyclic oxidation behavior of these cermets at 1100 and 1200 C in still air was determined by a thermogravimetric method supplemented by X-ray diffraction analysis and light and electron microscopy. In all instances, MgO prevented grain growth in the metallic phase. No evidence of oxidation along interphase boundaries was detected. Cermets of MgO in NiCrAlY and MgO in Hoskins-875 were superior to cermets of MgO in Inconel-702 and MgO in Hastelloy-X. Their oxidation resistance was degraded only when the MgO content was 40 vol percent. The oxidation behavior of MgO-in-Inconel-702 powder cermets containing 5- and 10-vol percent MgO was approximately similar to that of pure Inconel-702 compacts. The 20- and 40-vol percent MgO content reduced the oxidation resistance of MgO-in-Inconel-702 powder cermets relative to that of pure Inconel-702.

Zaplatynsky, I.↗

Field-induced orientation of nonlevitated microcrystals of superconducting YBa2Cu3O(7-x)

X-ray diffraction patterns of superconducting YBa2Cu3O(7-x) particles which have typical dimensions D of less than 5 microns and do not levitate in an inhomogeneous magnetic field at T less than Tc show marked evidence of particle alignment when powder specimens are subjected to a 0.5-T field at T less than Tc, but reveal random orientation for T greater than Tc. A majority of the particles align preferentially with their antiphase twin boundary planes and a-b planes along the applied field, but a minority align with their b axes along the field.

Solin, S. A.↗

One-step synthesis of dithiocarbamates from metal powders

Neutral metal dithiocarbamate complexes (M(NR2CS2)X) are well-known precursors to metal sulfides, a class of materials with numerous technological applications. We are involved in a research effort to prepare new precursors to metal sulfides using simple, reproducible synthetic procedures. We describe the results of our synthetic and characterization studies for M = Fe, Co, Ni, Cu. and In. For example, treatment of metallic indium with tetramethylthiuram disulfide (tmtd) in 4-methylpyridine (4-Mepy) at 25 deg C produces a new homoleptic indium (III) dithiocarbamate, In(N(CH3)2CS2)3(I), in yields of over 60 percent. The indium (III) dithiocarbamate was characterized by X-ray crystallography; (I) exists in the solid state as discrete distorted-octahedral molecules. Compound (I) crystallizes in the P1bar (No. 2) space group with lattice parameters: a = 9.282(1) A, b = 10.081(1) A, c = 12.502 A, alpha = 73.91(1) deg, beta = 70.21(1) deg, gamma = 85.8(1)deg, and Z = 2. X-ray diffraction and mass spectral data were used to characterize the products of the analogous reactions with Fe, Co, Ni, and Cu. We discuss both use of dithiocarbamates as precursors and our approach to their preparation.

Hepp, Aloysius F.↗

Structure and stability of hydrous minerals at high pressure

The presence of even small amounts of hydrogen in the Earth's deep interior may have profound effects on mantle melting, rheology, and electrical conductivity. The recent discovery of a large class of high-pressure H-bearing silicates further underscores the potentially important role for hydrous minerals in the Earth's mantle. Hydrogen may also be a significant component of the Earth's core, as has been recently documented by studies of iron hydride at high pressure. In this study, we explore the role of H in crystal structures at high pressure through detailed Raman spectroscopic and x ray diffraction studies of hydrous minerals compressed in diamond anvil cells. Brucite, Mg(OH)2, has a simple structure and serves as an analogue for the more complex hydrous silicates. Over the past five years, this material has been studied at high pressure using shock-compression, powder x ray diffraction, infrared spectroscopy, Raman spectroscopy, and neutron diffraction. In addition, we have recently carried out single-crystal synchrotron x-ray diffraction on Mg(OH)2 and Raman spectroscopy on Mg(OD)2 at elevated pressure. From all these studies, an interesting picture of the crystal chemical behavior of this material at high pressure is beginning to emerge. Some of the primary conclusions are as follows: First, hydrogen bonding is enhanced by the application of pressure. Second, layered minerals which are elastically anisotropic at low pressure may not be so at high pressure. Furthermore, the brucite data place constraints on the effect of hydrogen on seismic velocities and density at very high pressure. Third, the stability of hydrous minerals may be enhanced at high P by subtle structural rearrangements that are difficult to detect using traditional probes and require detailed spectroscopic analyses. Finally, brucite appears to be unique in that it undergoes pressure-induced disordering that is confined solely to the H-containing layers of the structure.

Duffy, T. S.↗