Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic force microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Enhanced triboelectrification of the polydimethylsiloxane surface by ultraviolet irradiation

Study of the triboelectric charging effect has recently gained much attraction by proposing a new potential technical application in the field of energy harvesting. Transparent polydimethylsiloxane (PDMS) has some advantages in employing the triboelectric effect due to good conformity at nanometer scale and the simple fabrication process. In this study, we demonstrate that UV irradiation can enhance the performance of a PDMS-based nanotribogenerator. Contact atomic force microscopy combined with Kelvin probe force microscopy enables an in-depth investigation of the effect of UV illumination on local triboelectric charge generation and its decay in PDMS. We found that UV exposure not only facilitates triboelectric charge generation but also enhances charge redistribution, which is related to the wettability of the PDMS surface. This study provides insights into the fundamental understanding and design of triboelectric generator devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical emission characteristics of medium- to high-pressure N{sub 2} dielectric barrier discharge plasmas during surface modification of polymers

The authors measured the band spectra (first and second positive systems) of the nitrogen molecule by optical emission spectroscopy with an aim to understand the mechanism of surface processing by medium- to high-pressure dielectric barrier discharge (DBD) plasmas. The experimentally measured and calculated spectra were compared to determine the vibrational and rotational temperatures of the N{sub 2} (C{sup 3}{Pi}{sub u}) state in the generated plasmas. The authors generated the N{sub 2} DBD plasmas at a driving frequency of 1-7 kHz and a discharge pressure of 20-10{sup 5} Pa for the surface modification of a polyethylene terephthalate (PET) sample. It was found that the vibrational temperature was greatly affected by the N{sub 2} pressure while the rotational temperature remained constant in the N{sub 2} pressure range of 20-10{sup 5} Pa. The emission intensity of N{sub 2} first positive system (B{sup 3}{Pi}{yields}A{sup 3}{Sigma}) rapidly decreased at an increasing N{sub 2} pressure due to the collisional relaxation process of the B{sup 3}{Pi} state with N{sub 2} molecules. The N{sub 2}{sup +}(B{sup 2}{Sigma}{sub u}{sup +}{yields}X{sup 2}{Sigma}{sub g}{sup +}) radiative transition was observed in the low-pressure DBD plasmas, which was attributed to the direct electron impact ionization of N{sub 2} molecules. The surface characterizations of treated PET samples by contact angle measurement and atomic force microscopy indicate that the low-pressure N{sub 2} DBD plasma is an effective method for the surface modification of polymers. Analysis indicates the plasma characteristics such as electron temperature and ion energy are mainly dependent on the N{sub 2} pressure, which turn to determine the surface properties of treated PET samples.

36 MATERIALS SCIENCE↗

Synthesis of atomically thin hexagonal boron nitride films on nickel foils by molecular beam epitaxy

Hexagonal boron nitride (h-BN) is a layered two-dimensional material with properties that make it promising as a dielectric in various applications. We report the growth of h-BN films on Ni foils from elemental B and N using molecular beam epitaxy. The presence of crystalline h-BN over the entire substrate is confirmed by Raman spectroscopy. Atomic force microscopy is used to examine the morphology and continuity of the synthesized films. A scanning electron microscopy study of films obtained using shorter depositions offers insight into the nucleation and growth behavior of h-BN on the Ni substrate. The morphology of h-BN was found to evolve from dendritic, star-shaped islands to larger, smooth triangular ones with increasing growth temperature.

36 MATERIALS SCIENCE↗

Low-temperature atomic layer deposition of copper(II) oxide thin films

Copper(II) oxide thin films were grown by atomic layer deposition (ALD) using bis-(dimethylamino-2-propoxide)copper [Cu(dmap){sub 2}] and ozone in a temperature window of 80–140 °C. A thorough characterization of the films was performed using x-ray diffraction, x-ray reflectivity, UV‐Vis spectrophotometry, atomic force microscopy, field emission scanning electron microscopy, x-ray photoelectron spectroscopy, and time-of-flight elastic recoil detection analysis techniques. The process was found to produce polycrystalline copper(II) oxide films with a growth rate of 0.2–0.3 Å per cycle. Impurity content in the films was relatively small for a low temperature ALD process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallization of sputtered-deposited and ion implanted amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films

X-ray diffraction and transmission electron microscopy have been utilized to measure the ion irradiation-induced modification in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films. The isothermal crystallization of sputtered-deposited and Sb{sup +} ion irradiated amorphous samples has been studied, focusing on the evolution of the microstructure during the initial stage of the transformation. In both samples, the amorphous to crystal transition occurs through the nucleation of face centered cubic (fcc) crystal domains at the film surface. A fast bidimensional growth of the crystalline nuclei in the sputtered-deposited films occurs by the generation of transrotational grains. The lattice parameter decreases as the crystalline fraction increases above 80%, and it approaches the fcc bulk value at the end of the transformation. Ion irradiation produces a densification of the deposited amorphous film (approx4% vertical shrinkage measured by atomic force microscopy) and an enhancement of the crystallization rate. Even in the irradiated amorphous, the nucleation occurs at the film surface and proceeds by the growth of the grains through the thickness of the layer although the density of the transrotational grains is strongly reduced with respect to the unirradiated amorphous. A link between the ion beam induced densification and the reduction of transrotational grains is proposed.

36 MATERIALS SCIENCE↗

Enhanced hole injection in organic light-emitting devices by using Fe{sub 3}O{sub 4} as an anodic buffer layer

Hole injection improvement in organic light-emitting devices with Fe{sub 3}O{sub 4} as a buffer layer on indium tin oxide (ITO) has been demonstrated. The luminance and the current density are significantly enhanced by using the Fe{sub 3}O{sub 4}/ITO anode, as well as the turn-on voltage is reduced by 1.5 V compared to the devices without the buffer. Results of atom force microscopy, x ray, and UV photoelectron spectroscopy studies reveal that the enhanced hole injection is attributed to the modification of the ITO surface and the reduced hole-injection barrier by the insertion of the Fe{sub 3}O{sub 4} thin film between the ITO and hole-transporting layer.

36 MATERIALS SCIENCE↗

Exfoliation of self-assembled 2D organic-inorganic perovskite semiconductors

Ultra-thin flakes of 2D organic-inorganic perovskite (C{sub 6}H{sub 9}C{sub 2}H{sub 4}NH{sub 3}){sub 2}PbI{sub 4} are produced using micromechanical exfoliation. Mono- and few-layer areas are identified using optical and atomic force microscopy, with an interlayer spacing of 1.6 nm. Refractive indices extracted from the optical spectra reveal a sample thickness dependence due to the charge transfer between organic and inorganic layers. These measurements demonstrate a clear difference in the exciton properties between “bulk” (>15 layers) and very thin (<8 layer) regions as a result of the structural rearrangement of organic molecules around the inorganic sheets.

36 MATERIALS SCIENCE↗

Development of the Physicochemical Properties of the GaSb(100) Surface in Ammonium Sulfide Solutions

Various conditions of passivation of the GaSb(100) surface by ammonium sulfide ((NH{sub 4}){sub 2}S) solutions depending on the solution concentration, solvent, and treatment time are investigated by X-ray photoelectron spectroscopy and atomic-force microscopy. It is shown that treatment of the GaSb(100) surface by any (NH{sub 4}){sub 2}S solution leads to removal of the native oxide layer from the semiconductor surface and the formation of a passivating layer consisting of various gallium and antimony sulfides and oxides. The surface with the lowest roughness (RMS = 0.85 nm) is formed after semiconductor treatment with 4% aqueous ammonium sulfide solution for 30 min. Herewith, the atomic concentration ratio Ga/Sb at the surface is ~2. It is also found that aqueous ammonium sulfide solutions do not react with elemental antimony incorporated into the native-oxide layer. The latter causes a leakage current and Fermi-level pinning at the GaSb(100) surface. However, a 4% (NH{sub 4}){sub 2}S solution in isopropanol removes elemental antimony almost completely; herewith, the semiconductor surface remains stoichiometric if a treatment duration is up to 13 min.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile synthesis of MoS{sub 2} and Mo{sub x}W{sub 1-x}S{sub 2} triangular monolayers

Single- and few-layered transition metal dichalcogenides, such as MoS{sub 2} and WS{sub 2}, are emerging two-dimensional materials exhibiting numerous and unusual physico-chemical properties that could be advantageous in the fabrication of unprecedented optoelectronic devices. Here we report a novel and alternative route to synthesize triangular monocrystals of MoS{sub 2} and Mo{sub x}W{sub 1-x}S{sub 2} by annealing MoS{sub 2} and MoS{sub 2}/WO{sub 3} precursors, respectively, in the presence of sulfur vapor. In particular, the Mo{sub x}W{sub 1-x}S{sub 2} triangular monolayers show gradual concentration profiles of W and Mo whereby Mo concentrates in the islands’ center and W is more abundant on the outskirts of the triangular monocrystals. These observations were confirmed by atomic force microscopy, and high-resolution transmission electron microscopy, as well as Raman and photoluminescence spectroscopy. The presence of tunable PL signals depending on the Mo{sub x}W{sub 1-x}S{sub 2} stoichiometries in 2D monocrystals opens up a wide range of applications in electronics and optoelectronics.

36 MATERIALS SCIENCE↗

Alternative to classic annealing treatments for fractally patterned TiO{sub 2} thin films

Titanium dioxide thin films have been deposited by reactive magnetron sputtering on glass and subsequently irradiated by UV radiation using a KrF excimer laser. The influence of the laser fluence (F) on the constitution and microstructure of the deposited films is studied for 0.05<F<0.40 J/cm{sup 2}. The diffraction data reveal that as deposited films are amorphous, while irradiated films present an anatase structure. Additional Raman spectroscopy study shows better crystal quality for the films irradiated with F<0.13 J/cm{sup 2}. The film morphology appears to be strongly modified after laser treatment. Atomic force microscopy and scanning electron microscopy measurements reveal fractally textured films presenting characteristics of high porosity and high specific surface area. Finally, contact angle analysis suggests hydrophobic or wetting behavior depending on F. In order to explain the laser-induced structuration mechanisms, we have successfully applied a fractal as well as the nucleation theories. We propose that electronics effects could be responsible for the observed crystallization.

36 MATERIALS SCIENCE↗

Probing force-induced unfolding intermediates of a single staphylococcal nuclease molecule and the effect of ligand binding

Single-molecule manipulation techniques have given experimental access to unfolding intermediates of proteins that are inaccessible in conventional experiments. A detailed characterization of the intermediates is a challenging problem that provides new possibilities for directly probing the energy landscape of proteins. We investigated single-molecule mechanical unfolding of a small globular protein, staphylococcal nuclease (SNase), using atomic force microscopy. The unfolding trajectories of the protein displayed sub-molecular and stochastic behavior with typical lengths corresponding to the size of the unfolded substructures. Our results support the view that the single protein unfolds along multiple pathways as suggested in recent theoretical studies. Moreover, we found the drastic change, caused by the ligand and inhibitor bindings, in the mechanical unfolding dynamics.

60 APPLIED LIFE SCIENCES↗

Continuously-tuned tunneling behaviors of ferroelectric tunnel junctions based on BaTiO{sub 3}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} heterostructure

In this work, we fabricate BaTiO{sub 3}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (BTO/LSMO) ferroelectric tunnel junction on (001) SrTiO{sub 3} substrate by pulsed laser deposition method. Combining piezoresponse force and conductive-tip atomic force microscopy, we demonstrate robust and reproducible polarization-controlled tunneling behaviors with the resulting tunneling electroresistance value reaching about 10{sup 2} in ultrathin BTO films (∼1.2 nm) at room temperature. Moreover, local poling areas with different conductivity are finally achieved by controlling the relative proportion of upward and downward domains, and different poling areas exhibit stable transport properties.

36 MATERIALS SCIENCE↗

Synthesis and growth of HgI{sub 2} nanocrystals in a glass matrix: Heat treatment

Mercury iodide (HgI{sub 2}) nanocrystals (NCs) were successfully grown in a barium phosphate glass matrix synthesized by fusion. Growth control of HgI{sub 2} NCs was investigated by Atomic Force Microscopy (AFM), Optical Absorption (OA), Fluorescence (FL), and X-ray diffraction (XRD). AFM images reveal the formation of HgI{sub 2} nanocrystals in host glass matrix. HgI{sub 2} NCs growth was evidenced by an OA and FL band red-shift with increasing annealing time. XRD measurements revealed the β crystalline phase of the HgI{sub 2} nanocrystals.

36 MATERIALS SCIENCE↗

Surface passivation of (100) GaSb using self-assembled monolayers of long-chain octadecanethiol

The passivation of (100) GaSb surface was investigated by means of the long-chain octadecanethiol (ODT) self-assembled monolayer (SAM). The properties of ODT SAM on (100) GaSb were characterized by the atomic force microscopy using Kelvin probe force microscopy mode and X-ray photoelectron spectroscopy. The chemical treatment of 10 mM ODT-C{sub 2}H{sub 5}OH has been applied to the passivation of a type-II superlattice InAs/GaSb photodetector. The electrical measurements indicate that the current density was reduced by one order of magnitude as compared to an unpassivated photodetector.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi level tuning of topological insulator Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates

The crystal structures and morphologies of ternary Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates have been systematically characterized by employing atomic force microscopy, scanning electron microscopy, high-resolution transmission electron microscopy equipped with the energy dispersive X-ray spectrometer, and the X-ray diffraction. We find that the Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates exhibit uniform charge and surface potential distributions. And their Fermi levels can be effectively tuned up to 0.23 eV by varying the selenium/tellurium composition ratios.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor-transport growth of high optical quality WSe{sub 2} monolayers

Monolayer transition metal dichalcogenides are atomically thin direct-gap semiconductors that show a variety of novel electronic and optical properties with an optically accessible valley degree of freedom. While they are ideal materials for developing optical-driven valleytronics, the restrictions of exfoliated samples have limited exploration of their potential. Here, we present a physical vapor transport growth method for triangular WSe{sub 2} sheets of up to 30 μm in edge length on insulating SiO{sub 2} substrates. Characterization using atomic force microscopy and optical microscopy reveals that they are uniform, monolayer crystals. Low temperature photoluminescence shows well resolved and electrically tunable excitonic features similar to those in exfoliated samples, with substantial valley polarization and valley coherence. The monolayers grown using this method are therefore of high enough optical quality for routine use in the investigation of optoelectronics and valleytronics.

36 MATERIALS SCIENCE↗

Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H) layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si) wafers by plasma enhanced chemical vapor deposition (PECVD). The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc) bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause of the observed increase in the optical bandgap of a-Si:H films close to the a-Si:H/cSi interface.

36 MATERIALS SCIENCE↗

Self-sensing cantilevers with integrated conductive coaxial tips for high-resolution electrical scanning probe metrology

The lateral resolution of many electrical scanning probe techniques is limited by the spatial extent of the electrostatic potential profiles produced by their probes. Conventional unshielded conductive atomic force microscopy probes produce broad potential profiles. Shielded probes could offer higher resolution and easier data interpretation in the study of nanostructures. Electrical scanning probe techniques require a method of locating structures of interest, often by mapping surface topography. As the samples studied with these techniques are often photosensitive, the typical laser measurement of cantilever deflection can excite the sample, causing undesirable changes electrical properties. In this work, we present the design, fabrication, and characterization of probes that integrate coaxial tips for spatially sharp potential profiles with piezoresistors for self-contained, electrical displacement sensing. With the apex 100 nm above the sample surface, the electrostatic potential profile produced by our coaxial tips is more than 2 times narrower than that of unshielded tips with no long tails. In a scan bandwidth of 1 Hz–10 kHz, our probes have a displacement resolution of 2.9 Å at 293 K and 79 Å at 2 K, where the low-temperature performance is limited by amplifier noise. We show scanning gate microscopy images of a quantum point contact obtained with our probes, highlighting the improvement to lateral resolution resulting from the coaxial tip.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗