Search NASA⌕ Search

SEARCH · Search NASA

Results for “coding productivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Speed and Direction Shear in the Stable Nocturnal Boundary Layer

Numerous previous works have shown that vertical shear in wind speed and wind direction exist in the atmospheric boundary layer. In this work, meteorological forcing mechanisms, such as the Ekman spiral, thermal wind, and inertial oscillation, are discussed as likely drivers of such shears in the statically stable environment. Since the inertial oscillation, the Ekman spiral, and statically stable conditions are independent of geography, potentially significant magnitudes of speed and direction shear are hypothesized to occur to some extent at any inland site in the world. The frequency of occurrence of non-trivial magnitudes of speed and direction shear are analyzed from observation platforms in Lubbock, Texas and Goodland, Indiana. On average, the correlation between speed and direction shear magnitudes and static atmospheric stability are found to be very high. Moreover, large magnitude speed and direction shears are observed in conditions with relatively high hub-height wind speeds. The effects of speed and direction shear on wind turbine power performance are tested by incorporating a simple steady direction shear profile into the fatigue analysis structures and turbulence simulation code from the National Renewable Energy Laboratory. In general, the effect on turbine power production varies with the magnitude of speed and direction shear across the turbine rotor, with the majority of simulated conditions exhibiting power loss relative to a zero shear baseline. When coupled with observational data, the observed power gain is calculated to be as great as 0.5% and depletion as great as 3% relative to a no shear baseline. The average annual power change at Lubbock is estimated to be -0.5%

17 WIND ENERGY↗

SU-E-T-534: Level of Residual Radioactivity of Activated Parts of a Decommissioned Cyclotron

Purpose: CTI cyclotron RDS-111 was used at the Hong Kong Sanatorium and Hospital (HKSH) to produce radiopharmaceuticals and radioactive tracers for diagnostic scans between 1999 and 2007. During the operation, some machine components became radioactive by activation. For the safety of staff, decommissioning took place in 2009, two years after the cyclotron had stopped operation. This study investigates the residual radioactivity and radionuclides found in different cyclotron components in 2014 in compliance with the local regulations in Hong Kong for transfer of radioactive waste. Methods: A representative sample of each part was counted using a high-purity germanium detector (manufacturer: ORTECT) for at least four hours. GammaVision, a multichannel analyzer software, was used to identify the radionuclides found in the cyclotron components, as well as the associated activities. A standard library and a Mariscotti peak search algorithm were used to identify the present radionuclides. Only radionuclides with half-life greater than 180 days were considered. Results: Among the components, the Havar target foil has the highest specific activity ((4.6±0.6)×10{sup 2} Bq/g), with Co-60 being the most prominent ((3.8±0.5)×10{sup 2} Bq/g). The total activity of the target foil, however, is still low due to its small mass of 0.04 g. Radioisotopes Mn-54 (46±6 Bq/g), Na-22 (6.8±0.8 Bq/g), Co-57 (7.3±0.9 Bq/g), and Fe-59 (6.0±0.9 Bq/g) have also been detected in the target foil. The target window holder and the vacuum window register a specific activity of 88.3±0.6 Bq/g and 48.6±0.1 Bq/g, respectively. Other components, such as the collimator, the target tube, the valve body and the beamline, are also found with trace amounts of radionuclides. Conclusion: Even seven years after the cyclotron had stopped operation, some components still exhibited residual radioactivity from activation exceeding the IAEA clearance levels. Special consideration for radiological protection may need to be taken in the disposal of the cyclotron parts.

07 ISOTOPE AND RADIATION SOURCES↗

SU-E-T-569: Neutron Shielding Calculation Using Analytical and Multi-Monte Carlo Method for Proton Therapy Facility

Purpose: To evaluate the shielding wall design to protect patients, staff and member of the general public for secondary neutron using a simply analytic solution, multi-Monte Carlo code MCNPX, ANISN and FLUKA. Methods: An analytical and multi-Monte Carlo method were calculated for proton facility (Sumitomo Heavy Industry Ltd.) at Samsung Medical Center in Korea. The NCRP-144 analytical evaluation methods, which produced conservative estimates on the dose equivalent values for the shielding, were used for analytical evaluations. Then, the radiation transport was simulated with the multi-Monte Carlo code. The neutron dose at evaluation point is got by the value using the production of the simulation value and the neutron dose coefficient introduced in ICRP-74. Results: The evaluation points of accelerator control room and control room entrance are mainly influenced by the point of the proton beam loss. So the neutron dose equivalent of accelerator control room for evaluation point is 0.651, 1.530, 0.912, 0.943 mSv/yr and the entrance of cyclotron room is 0.465, 0.790, 0.522, 0.453 mSv/yr with calculation by the method of NCRP-144 formalism, ANISN, FLUKA and MCNP, respectively. The most of Result of MCNPX and FLUKA using the complicated geometry showed smaller values than Result of ANISN. Conclusion: The neutron shielding for a proton therapy facility has been evaluated by the analytic model and multi-Monte Carlo methods. We confirmed that the setting of shielding was located in well accessible area to people when the proton facility is operated.

61 RADIATION PROTECTION AND DOSIMETRY↗

Status of QCD precision predictions for Drell–Yan rapidity distributions

We compute differential distributions for Drell–Yan processes at the LHC and the Tevatron colliders at next-to-next-to-leading order in perturbative QCD, including fiducial cuts on the decay leptons in the final state. The comparison of predictions obtained with four different codes shows excellent agreement, once linear power corrections from the fiducial cuts are included in those codes that rely on phase-space slicing subtraction schemes. For Z-boson production we perform a detailed study of the symmetric cuts on the transverse momenta of the decay leptons. Predictions at fixed order in perturbative QCD for those symmetric cuts, typically imposed in experiments, suffer from an instability. We show how this can be remedied by an all-order resummation of the fiducial transverse momentum spectrum, and we comment on the choice of cuts for future experimental analyses.

Alekhin, S. [University of Hamburg (Germany)]↗

GlobalSums, Version 1.x

This code is a set of global sums to support the paper "Computational Reproducibility for Production Physics Applications" submitted to the Numerical Reproducibility at Exascale (NRE 2015) workshop at the 2015 Supercomputing conference, Nov. 20, 2015

Robey, Robert↗

CQM-Analysis v1.0

This repository contains the data and code necessary to reproduce the primary analysis and figures for the manuscript "Pathways to productivity: mapping the relationship between multimodal transportation infrastructure, commute quality, and economic vitality for the United States workforce". The analysis demonstrates a newly defined commute quality metric (CQM) characterizing the quality, as a monetized consumer surplus, of travel for the purpose of work for every census tract in the continental United States. The analysis additionally demonstrates the correlation of that CQM with key economic vitality indicators. Specifically median household income and unemployment rate.

Spurlock, C Anna [Lawrence Berkeley National Labor↗

Verification studies of CCH and xALE [Slides]

CCH is a new cell-centered alternative to Lagrangian Staggered Grid Hydro (SGH). xALE is ALE based upon an exact intersection remap – an alternative to traditional swept face methods. CCH (& xALE) began as an LDRD/DR project and is now beginning to feed into several other efforts. Verification is a necessary step towards acceptance of these methods for production purposes. Here, we focus on verification as a companion (and guide) to the code development process. During the development stage of a method many choices of component algorithms are possible. We emphasize comparisons of these algorithmic variations and sometimes a progression of variations. In some cases, our findings also suggest improvements in FLAG hydro algorithms or their manner of use.

97 MATHEMATICS AND COMPUTING↗

Time-Dependent Boundary Modeling to Inform Design of SPARC Diagnostic and Actuators

The purpose of this work was to inform the design of diagnostic and actuator systems for a new experimental facility for Commonwealth Fusion Systems (CFS), called SPARC [Creely2020], using time-dependent plasma boundary simulations with the Scrape Off Layer Plasma Simulator (SOLPS) code [Wiesen2015]. The SPARC tokamak is a device that aims to demonstrate fusion energy production and high-field plasma operating scenarios. The developed technologies will be incorporated into a net-electricity pilot that will demonstrate approximately 200MW of electric power. A major difference from other private industry fusion companies is the use of a standard aspect ratio, but at a high magnetic field strength, which provides a well-established physics basis and a modest extrapolation to reactor operation. Time-dependent simulations were used to inform the design of main-chamber plasma facing components, which are protected by feedback control of the heat and particle loads during high power operation. The simulations provide the timescales and magnitudes of plasma and neutral particle response useful for determining the position and operation of diagnostics and actuators that will enable control. The plasma response and phase-space diagrams also provide input into advanced model-based control schemes, which are envisioned for later SPARC operation. Model-based control can reduce the risk of component failure, which would require expensive in-situ repairs and the associated delays, by predicting the system response to actuators over a short time-horizon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ParaDyn Implementation in the US Navy's DYSMAS Simulation System: FY08 Progress Report

The goal of this project is to increase the computational efficiency and capacity of the Navy's DYSMAS simulation system for full ship shock response to underwater explosion. Specifically, this project initiates migration to a parallel processing capability for the structural portion of the overall fluid-structure interaction model. The capstone objective for the first phase is to demonstrate operation of the DYSMAS simulation engine with a production model on a Naval Surface Warfare Center (IHD) parallel platform using the ParaDyn code for parallel processing of the structural dynamics. This year saw a successful launch to integrate ParaDyn, the high-parallel structural dynamics code from Lawrence Livermore National Laboratory (LLNL), into the DYSMAS system for simulating the response of ship structures to underwater explosion (UNDEX). The current LLNL version of DYNA3D, representing ten years of general development beyond the source branch used to initiate DYNA-N customization for DYSMAS, was first connected to the GEMINI flow code through DYSMAS Standard Coupler Interface (SCI). This permitted an early 'sanity check' by Naval Surface Warfare Center, Indian Head Division (NSWC-IHD) personnel that equivalent results were generated for their standard UNDEX test problems, thus ensuring the Verification & Validation pedigree they have developed remains intact. The ParaDyn code was then joined to the SCI in a manner requiring no changes to GEMINI. Three NSWC-IHD engineers were twice hosted at LLNL to become familiar with LLNL computer systems, the execution of the prototype software system, and to begin assessment of its accuracy and performance. Scaling data for the flow solver GEMINI was attained up to a one billion cell, 1000 processor run. The NSWC-IHD engineers were granted privileges to continue their evaluations through remote connections to LLNL's Open Computing Facility. Finally, the prototype changes were integrated into the mainline ParaDyn source repository and issued as part of its Version 8.1 beta release. This source was transmitted to NSWC-IHD and in collaboration with LLNL personnel the entire ParaDyn software suite successfully installed and demonstrated on its new SGI Altix machine. The ability of even minor numbers of processors for the structural dynamics to impact overall time-to-solution for DYSMAS has been demonstrated. Assessments of combined parallel efficiencies are beginning to highlight areas for further DYSMAS optimizations.

42 ENGINEERING↗

Neutrons in the moon

Neutron fluxes for energies between 15 MeV and thermal at depths of 0 to 300 g/sq cm in the moon are calculated by the discrete ordinate mathod with the ANISN code. With the energy spectrum of Lingenfelter et al. (1972). A total neutron-production rate for the moon of 26 plus or minus neutrons/sq cm sec is determined from the Ar-37 activity measurements in the Apollo 16 drill string, which are found to have a depth dependence in accordance with a neutron source function that decreases exponentially with an attenuation length of 155 g/sq cm.

Kornblum, J. J.↗

SDI satellite autonomy using AI and Ada

The use of Artificial Intelligence (AI) and the programming language Ada to help a satellite recover from selected failures that could lead to mission failure are described. An unmanned satellite will have a separate AI subsystem running in parallel with the normal satellite subsystems. A satellite monitoring subsystem (SMS), under the control of a blackboard system, will continuously monitor selected satellite subsystems to become alert to any actual or potential problems. In the case of loss of communications with the earth or the home base, the satellite will go into a survival mode to reestablish communications with the earth. The use of an AI subsystem in this manner would have avoided the tragic loss of the two recent Soviet probes that were sent to investigate the planet Mars and its moons. The blackboard system works in conjunction with an SMS and a reconfiguration control subsystem (RCS). It can be shown to be an effective way for one central control subsystem to monitor and coordinate the activities and loads of many interacting subsystems that may or may not contain redundant and/or fault-tolerant elements. The blackboard system will be coded in Ada using tools such as the ABLE development system and the Ada Production system.

Fiala, Harvey E.↗

Nucleon interaction data bases for background estimates

Nucleon interaction data bases available in the open literature are examined for potential use in a recently developed nucleon transport code. Particular attention is given to secondary particle penetration and the multiple charged ion products. A brief description of the transport algorithm is given.

Wilson, John W.↗

A parallel adaptive mesh refinement algorithm

Over recent years, Adaptive Mesh Refinement (AMR) algorithms which dynamically match the local resolution of the computational grid to the numerical solution being sought have emerged as powerful tools for solving problems that contain disparate length and time scales. In particular, several workers have demonstrated the effectiveness of employing an adaptive, block-structured hierarchical grid system for simulations of complex shock wave phenomena. Unfortunately, from the parallel algorithm developer's viewpoint, this class of scheme is quite involved; these schemes cannot be distilled down to a small kernel upon which various parallelizing strategies may be tested. However, because of their block-structured nature such schemes are inherently parallel, so all is not lost. In this paper we describe the method by which Quirk's AMR algorithm has been parallelized. This method is built upon just a few simple message passing routines and so it may be implemented across a broad class of MIMD machines. Moreover, the method of parallelization is such that the original serial code is left virtually intact, and so we are left with just a single product to support. The importance of this fact should not be underestimated given the size and complexity of the original algorithm.

Quirk, James J.↗

Acceleration of electrons and ions by strong lower-hybrid turbulence in solar flares

One of the outstanding problems in solar flare theory is how to explain the 10-20 keV and greater hard x-ray emissions by a thick target bremsstrahlung model. The model requires the acceleration mechanism to accelerate approximately 10(exp 35) electrons sec(exp -l) with comparable energies, without producing a large return current which persists for long time scales after the beam ceases to exist due to Lenz's law, thereby, producing a self-magnetic field of order a few mega-Gauss. In this paper, we investigate particle acceleration resulting from the relaxation of unstable ion ring distributions, producing strong wave activity at the lower hybrid frequency. It is shown that strong lower hybrid wave turbulence collapses in configuration space producing density cavities containing intense electrostatic lower hybrid wave activity. The collapse of these intense nonlinear wave packets saturate by particle acceleration producing energetic electron and ion tails. There are several mechanisms whereby unstable ion distributions could be formed in the solar atmosphere, including reflection at perpendicular shocks, tearing modes, and loss cone depletion. Numerical simulations of ion ring relaxation processes, obtained using a 2 1/2-D fully electromagnetic, relativistic particle in cell code are discussed. We apply the results to the problem of explaining energetic particle production in solar flares. The results show the simultaneous acceleration of both electrons and ions to very high energies: electrons are accelerated to energies in the range 10-500 keV, while ions are accelerated to energies of the order of MeVs, giving rise to x-ray emission and gamma-ray emission respectively. Our simulations also show wave generation at the electron cyclotron frequency. We suggest that these waves are the solar millisecond radio spikes. The strong turbulence collapse process leads to a highly filamented plasma producing many localized regions for particle acceleration and resulting in approximately 10(exp 17) electron 'beamlets' of width approximately equal to 10 lambda sub De which eliminates the production of large magnetic fields. In this paper, we demonstrate that the model produces an energetic electron spectrum with the right flux to account for the hard x-ray observations.

Spicer, D. S.↗

Land surface temperature measurements for EOS MODIS data

Work accomplished includes: Beta delivery 1 of the MODIS LST product; the first version of MODIS LST ATBD; update of the atmospheric radiative transfer code ATRAD; the development of a new approach look-up table method; and improvement of the TIR spectrometer. Preliminary feasibility analysis of the look-up table approach is presented in terms of showing the effects on the TIR radiance at the top of the atmosphere of the stratospheric and upper atmospheric temperature profiles, the surface emissivity and temperature, the lower atmospheric temperature and water vapor profiles, and the viewing angle.

Wan, Zhengming↗

MAMI: Modeling of the Magnetosphere-Ionosphere-Atmosphere System

Major emphasis of the investigation was the development of theoretical and numerical models of the aurora and of high latitude ionospheric processes. In particular: (1) the NCAR TIGCM (Thermosphere-Ionosphere Global Circulation Model) was updated to include mid and low latitude electrodynamics (this version is called TIE-GCM); (2) the NCAR TIE-GCM was modified to include a more realistic representation of the aurora; (3) the UAF auroral electron transport model was modified to include local acceleration processes; (4) a local ionospheric and auroral model (AURORA) was developed to allow detailed studies of the aurora; (5) a proton-hydrogen transport code has been developed to model proton aurora; and (6) a theory for the production of suprathermal atoms and ions in the upper atmosphere was developed and applied to studies of atomic nitrogen transport and helium escape on open field lines. These models enable us to devise schemes for tile interpretation and quantitative analysis of data obtained by the POLAR spacecraft. Parameterizations were formulated and are available to the GGS investigators. The UVI and VIS teams have adopted these parameterizations and include them in their data analysis. We have developed software for the quantitative interpretation of UVI and VIS images. After the launch of the POLAR satellite we used the image data from UVI and VIS in combination with ground based data from SuperDARN and incoherent scatter radars, magnetometers, and in situ observations from DMSP and NOAA satellites to characterize the state of the ionosphere. A number of event studies have been carried out in cooperation with other CGS theory teams.

Source record↗

Electromagnetics and Fluid Dynamics

Previous efforts focused on developing tools for design of low observables were sustained. The final product was the maturation of a high-order accurate finite-volume based code to solve Maxwell's equations. One of the primary achievements was the development and implementation of efficient filtering techniques which enhance the robustness of high-order and optimized schemes without significant adverse impact on accuracy. This has eliminated the stability barrier which restrains the common use of high-order schemes for conservative wave propagation phenomena on curvilinear meshes. A study was performed of crossing shock interactions under conditions of increasing interaction strength and asymmetry. In the first category, the observed computed topological bifurcations were correlated with the formation of various lines of coalescence and divergence evident in experimental and computed surf-ace oil maps. ne flow structure arising from asymmetric interactions was investigated with particular emphasis on: 1) vorticity dynamics, 2) shock-structure and 3) sidewall vortex loading. Several efforts of the prior year were successfully published in archival journals. The high-order algorithms developed for CEM have been implemented into the FDL3DI CFD code are presently undergoing extensive testing. Preliminary results are highly encouraging.

Gaitonde, Datta↗

A Computer Code for Gas Turbine Engine Weight And Disk Life Estimation

Reliable engine-weight estimation at the conceptual design stage is critical to the development of new aircraft engines. It helps to identify the best engine concept amongst several candidates. In this paper, the major enhancements to NASA's engine-weight estimate computer code (WATE) are described. These enhancements include the incorporation of improved weight-calculation routines for the compressor and turbine disks using the finite-difference technique. Furthermore, the stress distribution for various disk geometries was also incorporated, for a life-prediction module to calculate disk life. A material database, consisting of the material data of most of the commonly-used aerospace materials, has also been incorporated into WATE. Collectively, these enhancements provide a more realistic and systematic way to calculate the engine weight. They also provide additional insight into the design trade-off between engine life and engine weight. To demonstrate the new capabilities, the enhanced WATE code is used to perform an engine weight/life trade-off assessment on a production aircraft engine.

Tong, Michael T.↗