Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Differential effects of redox conditions on the decomposition of litter and soil organic matter

Soil redox conditions exert substantial influence on biogeochemical processes in terrestrial ecosystems. Humid tropical forests are often characterized by fluctuating redox dynamics, yet how redox fluctuations affect patterns in soil versus litter decomposition and associated CO2 fluxes are not well understood in these ecosystems. We used a 13C-labeled litter addition to explicitly follow the decomposition of litter-derived vs. native soil-derived organic matter in response to four different soil redox regimes—static oxic or anoxic, and two oscillating treatments—in soil from the Luquillo Experimental Forest, Puerto Rico. We coupled this incubation experiment with high-resolution mass spectrometry analysis to characterize the preferential decomposition of specific classes of organic molecules. CO2 production from litter and soil organic matter (SOM) showed distinctly different responses to redox manipulation. The cumulative production of SOM-derived CO2 was positively correlated with the length of soil exposure to an oxic headspace (r = 0.89, n = 20), whereas cumulative 13C-litter-derived CO2 production was not linked to oxygen availability. The CO2 production rate from litter was highest under static anoxic conditions in the first half of the incubation period, and later dropped to the lowest among all redox treatments. In the consistently anoxic soils, we observed the depletion of more oxidized water-extractable organic matter (especially amino sugars, carbohydrates, and proteins) over time, suggesting that under anaerobic conditions, microbes preferentially used more oxidized litter-derived compounds during the early stages of decomposition. Results from kinetic modeling showed that more frequent anoxic exposure limited the decomposition of a slow-cycling C pool, but not a fast-cycling pool. Overall, our results demonstrate that substrate source—freshly added litter vs. native organic matter—plays an important role in the redox sensitivity of organic matter decomposition. In soil environments that regularly experience redox fluctuations, anaerobic heterotrophs can be surprisingly effective in degrading fresh plant litter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stability Analysis of Coupled Advection-Diffusion Models with Bulk Interface Condition

Numerical stability is of critical importance in general circulation models because it affects the design of algorithms, time to solution, and computational costs associated with the simulations, which are very expensive in practice. In this paper we extend the stability analysis for ocean-atmosphere coupling proposed in [Zhang et al., J. Sci. Comput. 84, 44(2020)] to a more realistic model that includes horizontal advection. We analyze various time-stepping strategies. We find that advection has a stabilizing effect in scenarios common to climate models when bulk interface condition and explicit flux coupling are used. We also show that our method can be used to study the stability impact of advection for other interface conditions such as Dirichlet-Neumann conditions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Acoustic Emission-Based Methodology to Evaluate Delamination Crack Growth Under Quasi-static and Fatigue Loading Conditions

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination crack growth was predicted under both the static and fatigue loading conditions. The predicted crack growth values was were in a good agreement with the visually recorded data during the tests. The results indicated that the proposed AE-based method has good applicability to evaluate the delamination crack growth under quasi-static and fatigue loading conditions, especially when the crack is embedded within the structure and could not be seen visually.

42 ENGINEERING↗
DOE OSTI2018

Estimates for Functionals of Solutions to Higher-Order Heat-Type Equations with Random Initial Conditions

In the present paper we continue the investigation of solutions to higher-order heat-type equations with random initial conditions, which play the important role in many applied areas. We consider the random initial conditions given by harmonizable φ-sub-Gaussian processes. The main results are the bounds for the distributions of the suprema over bounded and unbounded domains for solutions of such equations. The results obtained in the paper hold, in particular, for the case of Gaussian initial condition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Determination of electrical parameters of ITO/CZTS/CdS/Ag and ITO/CdS/CZTS/Ag heterojunction diodes in dark and illumination conditions

In this work, ITO/CZTS/CdS/Ag and ITO/CdS/CZTS/Ag heterojunction diodes has been produced, CdS and CZTS thin film layers of the diode have been produced on ITO glass at room temperature using PLD technique. It has been produced CZTS thin films that have a polycrystalline structure that were annealed at the sulfurization temperatures of 325 °C, 350 °C and 375 °C when as-grown CZTS thin film has the amorphous structure. CdS thin films have been grown on substrate at room temperature in 15, 20 and 25 min that have polycrystalline structures. Then, CdS thin film deposited for 20 min was annealed at 200 °C temperature and, has better crystal structure compared to other thin films. Diodes have been composed of CZTS thin film annealed in 375 °C, CdS thin film was grown during 20 min and, then annealed at 200 °C temperature. According to J–V characteristics of diode, diodes exhibit some rectification behaviour in dark and show a photo-electric property under illumination conditions. In this article, the ideality factors of diodes in dark condition have been calculated, their electrical parameters of J{sub sc}, V{sub oc}, FF and η under the illumination condition have been determined and these electrical properties have been discussed in details.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of Weld Consumable Conditioning on the Diffusible Hydrogen and Subsequent Residual Stress and Flexural Strength of Multipass Welded P91 Steels

P91 steel weld joint was prepared using the shielded metal arc welding process and four different conditions of weld consumable that provide the different levels of diffusible hydrogen in deposited metal. In the present research, the effects of diffusible hydrogen content on the flexural strength, lower critical stress, and tensile strength of P91 steel welds were also determined with respect to different electrode conditions. To investigate the effect of diffusible hydrogen on multipass welding, top and root side flexural tests were performed. The residual stresses (axial stress and transverse stress) were also measured using the blind hole drilling method for different conditions of welding consumable. The peak value of residual stresses was measured at the center of the weld fusion zone. The maximum value of transverse stress was measured to be 355 MPa for case II (6.21 mL/100 g of diffusible hydrogen), while the maximum axial stress was about 218 MPa for case IV (12.43 mL/100 g of diffusible hydrogen). A three-dimensional finite element simulation was also performed to predict the residual stress distribution and thermal profile along the welded joint. The experimentally determined residual stresses correlated well with the numerically estimated residual stresses. The diffusible hydrogen content was not observed to have any significant effect on the residual stresses. The corrected residual stress values were also predicted by considering the plasticity-induced error. However, the flexural performance of the welded joint was affected by the diffusible hydrogen content. The top and root flexural strength was measured to be optimum for the low level of diffusible hydrogen content, and the values decreased with an increase in diffusible hydrogen content.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Effect of Different Annealing Conditions on the Anisotropy of the Fracture Toughness of Ti-6Al-4V

The room-temperature tensile and fracture toughness properties of Ti-6Al-4V plate were tested to characterize the effect of rolling direction on the fracture toughness in two different heat treatment conditions. Optical and scanning electron microscopy was used to characterize the microstructure and fracture surfaces. It was found that beta annealing increased the fracture toughness compared to a mill annealed product in all three orientations relative to the rolling direction; however, it had minimal effects on strength and modulus. Ti-6Al-4V was found to be isotropic in fracture toughness, varying 0.48% in the beta annealed condition and 6.4% in the mill annealed condition.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Convection Effects During Bulk Transparent Alloy Solidification in DECLIC-DSI and Phase-Field Simulations in Diffusive Conditions

In order to study the dynamical formation and evolution of cellular and dendritic arrays under diffusive growth conditions, three-dimensional (3D) directional solidification experiments were conducted in microgravity on a model transparent alloy onboard the International Space Station using the Directional Solidification Insert in the DEvice for the study of Critical LIquids and Crystallization. Selected experiments were repeated on Earth under gravity-driven fluid flow to evidence convection effects. Both radial and axial macrosegregation resulting from convection are observed in ground experiments, and primary spacings measured on Earth and microgravity experiments are noticeably different. The microgravity experiments provide unique benchmark data for numerical simulations of spatially extended pattern formation under diffusive growth conditions. The results of 3D phase-field simulations highlight the importance of accurately modeling thermal conditions that strongly influence the front recoil of the interface and the selection of the primary spacing. The modeling predictions are in good quantitative agreements with the microgravity experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Anomalous transients in GPS measurements due to induced changes in local site conditions

Transients in GPS time series can occur due to post-seismic deformation, seasonal hydrological loads, sea-level changes, flood and drought conditions, excessive groundwater withdrawal and recharge, etc. We report two new cases where the application of external loading, namely, earthquake loading and surface loading due to impoundment of hydroelectric reservoir, probably altered the local hydrological conditions to cause anomalous transients in the surface displacement. In the first case, moderate shaking due to the 2015 Gorkha earthquake at Patna (Bihar, India) caused transients in ground deformation in the following 50-60 days of the earthquake which are recorded by a continuous GPS site at Patna. In the second case, impoundment of the Tehri reservoir and its seasonal variations in the Garhwal Himalaya probably altered the local hydrological conditions which is causing anomalous biannual cyclic deformation at a site KUNR, near the reservoir.

58 GEOSCIENCES↗
DOE OSTI2020

Evaluation of near-ambient algal biomass fractionation conditions for bioproduct development

This contribution describes an algal fractionation scheme based on cell lysing and carbohydrate hydrolysis under acidic conditions, coupled with solvent extraction, that produces algal lipids, carbohydrates, and proteinaceous solid from partially dewatered algal biomass. Here, a design of experiments analysis was employed to identify the effect of fractionation conditions on the yields of the three product streams. By selection of appropriate conditions, the process can be steered from simple lipid extraction to near complete fractionation of the biomass. Lipid purification and upgrading were respectively achieved with a low-cost adsorbent and an inexpensive Ni-based catalyst that deoxygenated the lipids via decarboxylation/decarbonylation, an approach offering several advantages over the hydrodeoxygenation-based processes typically employed to convert lipids to hydrocarbons. The proteinaceous solids obtained were found to have much lower ash content as well as higher protein content relative to the untreated algae, enhancing the suitability of this material as a feedstock for the production of bioplastics.

09 BIOMASS FUELS↗
DOE OSTI2018

Continuity conditions for tensor product Q-Bézier surfaces of degree (m, n)

Based on a kind of Q-Bézier surfaces with shape parameters, the basic properties of the surfaces and the geometric significance of the shape parameters are analyzed. To resolve the problem of shape control and adjustment of composite surfaces, the continuity conditions for Q-Bézier surfaces of degree (m, n) are investigated. Taking advantage of the terminal properties of generalized Bernstein basis functions, we derive the conditions of G{sup 1} and G{sup 2} continuity between two adjacent Q-Bézier surfaces. In addition, the specific steps of smooth continuity between Q-Bézier surfaces and the shape adjustment function of shape parameters for composite surfaces are discussed. The modeling examples show that the proposed smooth continuity conditions are not only intuitive and easy to implement, but also greatly enhance the shape adjustability, which provide a useful method for constructing complex surfaces in engineering design.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Schmid factor crack propagation and tracking crystallographic texture markers of microstructural condition in direct energy deposition additive manufacturing of Ti-6Al-4V

Metallic additive manufacturing (AM) provides a customizable and tailorable manufacturing process for new engineering designs and technologies. The greatest challenge currently facing metallic AM is maintaining control of microstructural evolution during solidification and any solid state phase transformations during the build process. Ti-6Al-4V has been extensively surveyed in this regard, with the potential solid state and solidification microstructures explored at length. In this study, we evaluate the applicability of previously determined crystallo- graphic markers of microstructural condition observed in electron beam melting powder bed fusion (PBF-EB) builds of Ti-6Al-4V in a directed energy deposition (DED) build process. The aim of this effort is to elucidate whether or not these specific crystallographic textures are useful tools for indicating microstructural conditions in AM variants beyond PBF-EB. Parent β-Ti grain size was determined to be directly related to α-Ti textures in the DED build process, and the solid state microstructural condition could be inferred from the intensity of specific α-Ti orientations. Qualitative trends on the as-solidified β-Ti grain size were also determined to be related to the presence of a fiber texture, and proposed as a marker for as-solidified grain size in any cubic metal melted by AM. Analysis of the DED Ti-6Al-4V build also demonstrated a near complete fracture of the build volume, suspected to originate from accumulated thermal stresses in the solid state. Crack propagation was found to only appreciably occur in regions of slow cooling with large α +β colonies. Schmid factors for the basal and prismatic α-Ti systems explained the observed crack pathway, including slower bifurcation in colonies with lower Schmid factors of both slip systems. Colony morphologies and localized equiaxed β-Ti solidification were also found to originate from build pauses during production and uneven heating of the build edges during deposition. Tailoring of DED Ti-6Al-4V microstructures with the insight gained here is proposed, along with cautionary insight on preventing unplanned build pauses to maintain an informed and controlled thermal environment for microstructural control.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Toward an understanding of lipid and starch accumulation in microalgae: A proteomic study of Neochloris oleoabundans cultivated under N-limited heterotrophic conditions

Neochloris oleoabundans is an oleaginous microalga of biotechnological and commercial interest. A proteomic study was performed to compare the abundance of proteins under two different culture conditions; i.e., preferential lipid accumulation and preferential carbohydrate accumulation. When N. oleoabundans was cultivated under long periods of nitrogen starvation, the acyl carrier protein and the protein biotin carboxylase from the lipid synthesis pathway were found to be upregulated. The central metabolism pathways were also found to be highly activated to redirect the carbon flow toward pyruvate dehydrogenase and ATP synthesis. Pyruvate dehydrogenase was upregulated to supply the precursors for lipid production. Furthermore, the pentose phosphate pathway, specifically the enzymes glucose 6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase, were upregulated to supply reducing power in the form of NADPH for lipid synthesis and inorganic nitrogen assimilation. Carbohydrate synthesis-related enzymes that channel carbon to starch and sugar synthesis, such as UDP-glucose pyrophosphorylase and starch synthase, were upregulated when short durations of nitrogen limitation were applied to N. oleoabundans cultivation. However, ADP-glucose pyrophosphorylase was upregulated under preferential lipid accumulation conditions, indicating that under prolonged nitrogen starvation conditions, this enzyme potentially hydrolyzes starch chains to channel the carbon flow to lipid synthesis, which indicates a dual function of this protein.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Evaluation of light energy to H 2 energy conversion efficiency in thin films of cyanobacteria and green alga under photoautotrophic conditions

Cyanobacteria and green algae harness solar energy to split water and to fix CO 2 . Under specific conditions, they are capable of photoproduction of molecular hydrogen (H 2 ). This study compares the light-energy-to-hydrogen-energy conversion efficiency (LHCE) in two heterocystous, N 2 -fixing cyanobacteria (wild-type Calothrix sp. strain 336/3 and the ΔhupL mutant of Anabaena sp. strain PCC 7120) and in the sulfur-deprived green alga, Chlamydomonas reinhardtii strain CC-124, after entrapment of the cells in thin Ca 2+ -alginate films. The experiments, performed under photoautotrophic conditions, showed higher LHCEs in the cyanobacteria as compared to the green alga. The highest efficiency of ca. 2.5% was obtained in films of the entrapped ΔhupL strain under low light condition (2.9 W m -2 ). Calothrix sp. 336/3 films produced H 2 with a maximum efficiency of 0.6% under 2.9 W m -2 , while C. reinhardtii films produced H 2 most efficiently under moderate light (0.14% at 12.1 W m -2 ). Exposure of the films to light above 16 W m -2 led to noticeable oxidative stress in all three strains, which increased with light intensity. The presence of oxidative stress was confirmed by increased (i) degradation of chlorophylls and some structural carotenoids (such as β-carotene), (ii) production of hydroxylated carotenoids (such as zeaxanthin), and (iii) carbonylation of proteins. We conclude that the H 2 photoproduction efficiency in immobilized algae and cyanobacteria can be further improved by entrapping cultures in immobilization matrices with increased permeability for gases, especially oxygen, while matrices with low porosity produced increased amounts of xanthophylls and other antioxidant compounds.

08 HYDROGEN↗
DOE OSTI2014

Weak measurement and Bohmian conditional wave functions

It was recently pointed out and demonstrated experimentally by Lundeen et al. that the wave function of a particle (more precisely, the wave function possessed by each member of an ensemble of identically-prepared particles) can be “directly measured” using weak measurement. Here it is shown that if this same technique is applied, with appropriate post-selection, to one particle from a perhaps entangled multi-particle system, the result is precisely the so-called “conditional wave function” of Bohmian mechanics. Thus, a plausibly operationalist method for defining the wave function of a quantum mechanical sub-system corresponds to the natural definition of a sub-system wave function which Bohmian mechanics uniquely makes possible. Similarly, a weak-measurement-based procedure for directly measuring a sub-system’s density matrix should yield, under appropriate circumstances, the Bohmian “conditional density matrix” as opposed to the standard reduced density matrix. Experimental arrangements to demonstrate this behavior–and also thereby reveal the non-local dependence of sub-system state functions on distant interventions–are suggested and discussed. - Highlights: • We study a “direct measurement” protocol for wave functions and density matrices. • Weakly measured states of entangled particles correspond to Bohmian conditional states. • Novel method of observing quantum non-locality is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Anisotropic stars for spherically symmetric spacetimes satisfying the Karmarkar condition

A new class of solution describing an anisotropic stellar configuration satisfying Karmarkar’s condition i.e. spherically symmetric metric of embedding class 1, is reported. It has been shown that the compact star model is physically well-behaved and meet all the physical requirements for a stable configuration in hydrostatic equilibrium. Our model describes compact stars like Vela X-1 and 4U1608-52 to a very good approximation. - Highlights: • We consider the Einstein field equations for spherically symmetric spacetimes of embedding class one. • We explore the Karmarkar condition for spherically symmetric, bounded matter configurations. • The Karmarkar condition reduces the solution-generating method to the Einstein field equations to a single metric function. • By specifying this metric function we generate physically plausible stellar configurations with anisotropic pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Gravastars in (3+1) dimensions admitting Karmarkar condition

Highlights: • Model of Gravastar in (3+1) dimensions is studied under GR. • Karmarkar condition of Embedding class 1 has been incorporated. • The class 1 condition provides an exact solution of three regions of gravastar. • Surface redshift confirms the stability of the model which is non-singular. - Abstract: The development of gravastar model by Mazur and Mottola (2004) is one of the most acceptable alternatives of conventional classical black hole. They have studied phase transition of the collapsing stellar objects at low temperature near event horizon which leads to the condensate phase, i.e. Bose–Einstein condensation. In the present study we have obtained a unique solution of this gravastar model under Einstein’s GR in (3+1) dimensions by incorporating the Karmarkar condition for embedding class 1. The most important motive of this work is to find an exact solution of the shell without taking the thin shell approximation. We have obtained singularity free finite solutions for the interior of the gravastar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Embedding condition describing shearing, dissipative collapse

Highlights: • Perturbative approach to the time-dependent Karmarkar condition in shearing collapse. • Analysis of the (in)stability of the collapsing fluid using the TOV equation. • Study of the temperature profiles using a causal heat transport equation. In this work we employ the time-dependent Karmarkar condition to model dissipative gravitational collapse in the presence of shear which leads to a final static configuration. We believe that this is a first attempt at using the time-dependent Karmarkar condition describing a radiating star with shear in which the collapsing core dissipates energy in the form of a radial heat flux. The final static configuration which is described by an embedding class I spacetime was obtained by Hansraj and Moodly who showed that this solution satisfies all the physical requirements for a static compact object. As the collapse proceeds and the heat flux tends to zero the dynamical core evolves into a static compact core with the exterior spacetime being described by the vacuum Schwarzschild solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗