Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Photocatalyzed electron exchange between organic chromophores and hematite nanoparticles and the role of solid-state charge transport

Understanding photocatalyzed redox interactions between Fe(III)–(oxyhydr)oxide mineral nanoparticles and adsorbed chromophoric organic matter is critical for accurately predicting bioavailable iron fluxes in the euphotic zone of natural aquatic systems, and for improving the effectiveness of nano-iron-based water purification systems. However, the electron transfer processes that underpin photoreductive dissolution at particle/organic/solution interfaces occur on ultrafast timescales and thus remain difficult to probe. In this work, we report an ultrafast transient absorption spectroscopy (TAS) study of suspensions of hematite nanoplatelets (HNPs) sensitized by adsorbed rhodamine B (RhB) dye as a function of solution media and pH. The TAS results indicate a substantially longer fluorescence lifetime of RhB adsorbed on HNPs across a wide range of pH conditions, consistent with transient photoinduced electron transfer to the oxide with recombination kinetics controlled by electron migration back to the interface via small polaron hopping. Normalization of the observed kinetics to the measured surface loading of RhB at different pH values shows that the recombination rates are insensitive to environmental variables, likely controlled instead by particle properties that determine small polaron diffusion behavior.

54 ENVIRONMENTAL SCIENCES↗

NASA’s Quiet Electric ENgines (QUEEN): Summary of the Acoustic Tests of the QUEEN V1

Noise produced by an electric ducted fan system was measured in tests at the NASA Glenn Research Center Acoustical Testing Laboratory. Main components of the system include a Commercial-Off- the-Shelf (COTS) fan and motor, an Electronic Speed Controller, a custom-designed inlet bellmouth, and several experimental inlet duct acoustic liners. Fan speed, thrust, and noise were measured in this static ground test of the propulsor. This propulsor prototype is one of NASA’s Quiet Electric ENgines (QUEENs) and is designated the ‘QUEEN V1.’ The Quiet Electric Engines are being developed for the 25% scale model of the Subsonic Aft Engine (SUSAN) Flight Research Vehicle and are intended to explore the potential of distributed electric propulsion for large regional single-aisle aircraft. Lessons learned will be used to guide development of future QUEEN prototypes. Results of a thermal test of the Electronic Speed Controller measured during this test are presented in a separate report.

L Danielle Koch↗

The ProtoDUNE-SP LArTPC electronics production, commissioning, and performance

The ProtoDUNE-SP detector is a large-scale prototype of the Single-Phase (SP) Liquid Argon Time Projection Chamber (LArTPC) design proposed for the Deep Underground Neutrino Experiment (DUNE). 15,360 LArTPC wires are instrumented with low electronic noise pre-amplifier and digitization ASICs integrated into Front End Motherboards (FEMBs) operating at cryogenic temperature within the cryostat. The large number of electronics channels and high performance specifications required a large-scale production electronics quality control effort, careful installation into Anode Plane Assemblies (APAs), and rigorous detector commissioning. This successful collaboration-wide effort achieved a working LArTPC electronics channel percentage of 99.7% (15,318 of 15,360 channels in total), whose operating performance exceeded expectations. We summarize the ProtoDUNE-SP cold electronics design and quality control, installation, and commissioning efforts that enabled this excellent electronics performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Event Detection for Undersampled Electron Microscopy Experiments: A Control Chart Case Study

Real-time systems often consist of high-volume, high-velocity data streams in which making efficient and timely inferences about the data are challenging. In particular, when a user interacts with a real-time system to gain insights, detect events, and make decisions about the system, the rate and amount of information the user is required to process is generally overwhelming. In addition, analytically processing large volumes of data can be computationally expensive and, in real-time, renders traditional inferential methods effectively useless. One approach to mitigate these challenges is to reduce both the amount of information presented to the user and the volume of data placed in the stream. In this manuscript we will describe a method constructed under this approach in addition to the development and deployment of an online tool, Real time Event Detector for Subsampled Images (REDSI), designed to provide feedback on a real-time system by characterizing and detecting events of interest. We will discuss REDSI in the context of scanning transmission electron microscopy (STEM), which is a powerful real-time system that provides high spatial and temporal resolution on nanoscale structures and processes. The data produced by STEM experiments are a stream of images relaying structural, compositional, and dynamic interphase information to scientists in fields ranging from microbiology and neuroscience to materials science and energetics. While REDSI was designed to processes STEM images in real time, we will also discuss other real-time system applications for this methodology.

multivariate statistics, event detection↗

Hot electron production in laser solid interactions with a controlled pre-pulse

Hot electron generation plays an important role in the fast ignition approach to inertial confinement fusion (ICF) and other applications with ultra-intense lasers. Hot electrons of temperature up to 10–20 MeV have been produced by high contrast picosecond duration laser pulses focussed to intensities of ∼10{sup 20} W cm{sup −2} with a deliberate pre-pulse on solid targets using the Vulcan Petawatt Laser facility. We present measurements of the number and temperature of hot electrons obtained using an electron spectrometer. The results are correlated to the density scale length of the plasma produced by a controlled pre-pulse measured using an optical probe diagnostic. 1D simulations predict electron temperature variations with plasma density scale length in agreement with the experiment at shorter plasma scale lengths (<7.5μm), but with the experimental temperatures (13–17 MeV) dropping below the simulation values (20–25 MeV) at longer scale lengths. The experimental results show that longer interaction plasmas produced by pre-pulses enable significantly greater number of hot electrons to be produced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heterogeneous nucleation of ice on anthropogenic organic particles collected in Mexico City

This study reports on heterogeneous ice nucleation activity of predominantly organic (or coated with organic material) anthropogenic particles sampled within and around the polluted environment of Mexico City. The onset of heterogeneous ice nucleation was observed as a function of particle temperature (Tp), relative humidity (RH), nucleation mode, and particle chemical composition which is influenced by photochemical atmospheric aging. Particle analyses included computer controlled scanning electron microscopy with energy dispersive analysis of X-rays (CCSEM/EDX) and scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). In contrast to most laboratory studies employing proxies of organic aerosol, we show that anthropogenic organic particles collected in Mexico City can potentially induce ice nucleation at experimental conditions relevant to cirrus formation. The results suggest a new precedent for the potential impact of organic particles on ice cloud formation and climate.

54 ENVIRONMENTAL SCIENCES↗

NASA’s Quiet Electric ENgines (QUEEN): Summary of the Acoustic Tests of the QUEEN V1

Noise produced by an electric ducted fan system was measured in tests at the NASA Glenn Research Center Acoustical Testing Laboratory. Main components of the system include a Commercial-Off-the-Shelf fan, shroud, motor, and Electronic Speed Controller, plus a custom-designed inlet bellmouth, and four experimental inlet duct acoustic liners. Fan speed and noise were measured in this static ground test of the propulsor. This propulsor prototype is one of NASA’s Quiet Electric ENgines (QUEENs) and is designated the ‘QUEEN V1.’ The Quiet Electric Engines are being developed for the 25% scale model of the Subsonic Aft Engine (SUSAN) Flight Research Vehicle and are intended to explore the potential of distributed electric propulsion for large single-aisle aircraft. Results indicated that inlet duct acoustic liners reduced tone and broadband noise as compared to a hardwall inlet duct. Predicted performance of the honeycomb liner compared well with measurements from an array of far field microphones. Inlet acoustic liners are just one method for mitigating noise for electric ducted fans for aircraft propulsion systems. Lessons learned will be used to guide development of future QUEEN prototypes. Results of a thermal test of the Electronic Speed Controller are presented in a separate report.

Aircraft propulsion and power↗

NASA’s Quiet Electric ENgines (QUEEN): Summary of the Acoustic Tests of the QUEEN V1

Noise produced by an electric ducted fan system was measured in tests at the NASA Glenn Research Center Acoustical Testing Laboratory. Main components of the system include a Commercial-Off-the-Shelf fan, shroud, motor, and Electronic Speed Controller, plus a custom-designed inlet bellmouth, and four experimental inlet duct acoustic liners. Fan speed and noise were measured in this static ground test of the propulsor. This propulsor prototype is one of NASA’s Quiet Electric ENgines (QUEENs) and is designated the ‘QUEEN V1.’ The Quiet Electric Engines are being developed for the 25% scale model of the Subsonic Aft Engine (SUSAN) Flight Research Vehicle and are intended to explore the potential of distributed electric propulsion for large single-aisle aircraft. Results indicated that inlet duct acoustic liners reduced tone and broadband noise as compared to a hardwall inlet duct. Predicted performance of the honeycomb liner compared well with measurements from an array of far field microphones. Inlet acoustic liners are just one method for mitigating noise for electric ducted fans for aircraft propulsion systems. Lessons learned will be used to guide development of future QUEEN prototypes. Results of a thermal test of the Electronic Speed Controller are presented in a separate report.

Aircraft propulsion and power↗

Observation of light-driven band structure via multiband high-harmonic spectroscopy

Intense light–matter interactions have revolutionized our ability to probe and manipulate quantum systems at sub-femtosecond timescales, opening routes to the all-optical control of electronic currents in solids at petahertz rates. Such control typically requires electric-field amplitudes in the range of almost volts per angstrom, when the voltage drop across a lattice site becomes comparable to the characteristic bandgap energies. In this regime, intense light–matter interaction induces notable modifications to the electronic and optical properties, dramatically modifying the crystal band structure. Yet, identifying and characterizing such modifications remain an outstanding problem. As the oscillating electric field changes within the driving field’s cycle, does the band structure follow and how can it be defined? Here we address this fundamental question, proposing all-optical spectroscopy to probe the laser-induced closing of the bandgap between adjacent conduction bands. Our work reveals the link between nonlinear light–matter interactions in strongly driven crystals and the sub-cycle modifications in their effective band structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deterministic Control of Sn 3+ Valence and Electronic Phase Evolution in AgSnSe 2

Understanding how unusual oxidation states influence material properties is important for both fundamental science and energy applications. AgSnSe 2 is particularly intriguing because it stabilizes the rare and long-debated Sn 3+ oxidation state, whose true existence and role have remained enigmatic for many years. Here, in this work, we employ X-ray photoelectron spectroscopy, Mössbauer spectroscopy, and X-ray absorption spectroscopy to directly probe the oxidation state of Sn and its evolution under chemical substitution. All experimental evidence consistently confirms the presence of Sn in the +3 oxidation state in AgSnSe 2 . Complementary density functional theory calculations further corroborate this assignment. By substituting Sn with Sb, we systematically control the electronic state and its impact on the material’s physical properties. At low Sb concentrations, AgSnSe 2 retains superconductivity with a transition temperature of ∼5 K, while increasing Sb content deterministically drives a metallic-to-semiconducting transition through progressive suppression of superconductivity. Spectroscopic analyses show that Sb substitution provides deterministic control of the Sn oxidation state, evolving from a uniform +3 configuration in AgSnSe 2 to a mixed +2/+4 valence-skipping regime at higher Sb levels, thereby establishing a direct chemical handle over the material’s electronic phase. This tunability demonstrates that the Sn oxidation state in AgSnSe2 can be precisely engineered through Sb substitution, enabling controlled electronic phase transitions and establishing AgSnSe 2 as a promising platform for quantum and energy-related applications

crystal structure↗

Thermal and thermoelectric transport measurements of an individual boron arsenide microstructure

Recent first principles calculations have predicted that boron arsenide (BAs) can possess an unexpectedly high thermal conductivity that depends sensitively on the crystal size and defect concentration. However, few experimental results have been obtained to verify these predictions. In the present work, we report four-probe thermal and thermoelectric transport measurements of an individual BAs microstructure that was synthesized via a vapor transport method. The measured thermal conductivity was found to decrease slightly with temperature in the range between 250K and 350 K. The temperature dependence suggests that the extrinsic phonon scattering processes play an important role in addition to intrinsic phonon-phonon scattering. The room temperature value of (186646) Wm -1 K -1 is higher than that of bulk silicon but still a factor of four lower than the calculated result for a defect-free, non-degenerate BAs rod with a similar diameter of 1.15 μm. The measured p-type Seebeck coefficient and thermoelectric power factor are comparable to those of bismuth telluride, which is a commonly used thermoelectric material. In conclusion, the foregoing results also suggest that it is necessary to not only reduce defect and boundary scatterings but also to better understand and control the electron scattering of phonons in order to achieve the predicted ultrahigh intrinsic lattice thermal conductivity of BAs.

36 MATERIALS SCIENCE↗

Case Controllers & EEVs

This case study covers tips and best practices for installing and maintaining case controllers with electronic expansion valves (EEVs). It features the work Hannaford Supermarkets has performed using refrigeration case controllers with EEVs since the 1990s, resulting in 15-30% energy savings.

supermarket, case controllers, refrigeration, elec↗

Chemical Imaging of Ambient Aerosol Particles: Observational Constraints on Mixing State Parameterization

A new parameterization for quantifying the mixing state of aerosol populations has been applied for the first time to samples of ambient particles analyzed using spectro-microscopy techniques. Scanning transmission x-ray microscopy/near edge x-ray absorption fine structure (STXM/NEXAFS) and computer controlled scanning electron microscopy/energy dispersive x-ray spectroscopy (CCSEM/EDX) were used to probe the composition of the organic and inorganic fraction of individual particles collected on June 27th and 28th during the 2010 Carbonaceous Aerosols and Radiative Effects (CARES) study in the Central Valley, California. The first field site, T0, was located in downtown Sacramento, while T1 was located near the Sierra Nevada Mountains. Mass estimates of the aerosol particle components were used to calculate mixing state metrics, such as the particle-specific diversity, bulk population diversity, and mixing state index, for each sample. Both microscopy imaging techniques showed more changes over these two days in the mixing state at the T0 site than at the T1 site. The STXM data showed evidence of changes in the mixing state associated with a build-up of organic matter confirmed by collocated measurements and the largest impact on the mixing state was due to an increase in soot dominant particles during this build-up. The CCSEM/EDX analysis showed the presence of two types of particle populations; the first was dominated by aged sea salt particles and had a higher mixing state index (indicating a more homogeneous population), the second was dominated by carbonaceous particles and had a lower mixing state index.

Environmental Molecular Sciences Laboratory↗

Temperature control and calibration issues in the growth, processing and characterization of electronic materials

The temperature control and calibration issues encountered in the growth, processing, and characterization of electronic materials are summarized. The primary problem area is identified as temperature control during epitaxial materials growth. While qualitative thermal measurements are feasible and reproducibility is often achievable within a given system, absolute calibration is essentially impossible in many cases, precluding the possibility of portability from one system to another. The procedures utilized for thermal measurements during epitaxial growth are described, and their limitations discussed.

Wilson, B. A.↗

Ligand-Controlled Rates of Photoinduced Electron Transfer in Hybrid CdSe Nanocrystal/Poly(viologen) Films

This paper describes a study of the rates of photoinduced electron transfer (PET) from CdSe quantum dots (QDs) to poly(viologen) within thin films, as a function of the length of the ligands passivating the QDs. Ultrafast (<10 ps), quantitative PET occurs from CdSe QDs coated with HS-(CH2)n-COOH for n = 1, 2, 5, and 7 to viologen units. The observed decrease in the magnitude of the PET rate constant with n is weaker than that expected from the decay of the electron tunneling probability across extended all-trans mercaptocarboxylic acids but well-described by electron tunneling across a collapsed ligand shell. The PET rate constants for films with n = 10 and 15 are much slower than those expected based on the trend for n = 1–7; this deviation is ascribed to the formation of bundles of ligands on the surface of the QD that make the tunneling process prohibitively slow by limiting access of the viologen units to the surfaces of the QDs. This study highlights the importance of molecular-level morphology of donor and acceptor materials in determining the rate and yield of interfacial photoinduced electron transfer in thin films.

36 MATERIALS SCIENCE↗