Search NASA⌕ Search

SEARCH · Search NASA

Results for “data driven model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Particle Filtering for Model-Based Anomaly Detection in Sensor Networks

A novel technique has been developed for anomaly detection of rocket engine test stand (RETS) data. The objective was to develop a system that postprocesses a csv file containing the sensor readings and activities (time-series) from a rocket engine test, and detects any anomalies that might have occurred during the test. The output consists of the names of the sensors that show anomalous behavior, and the start and end time of each anomaly. In order to reduce the involvement of domain experts significantly, several data-driven approaches have been proposed where models are automatically acquired from the data, thus bypassing the cost and effort of building system models. Many supervised learning methods can efficiently learn operational and fault models, given large amounts of both nominal and fault data. However, for domains such as RETS data, the amount of anomalous data that is actually available is relatively small, making most supervised learning methods rather ineffective, and in general met with limited success in anomaly detection. The fundamental problem with existing approaches is that they assume that the data are iid, i.e., independent and identically distributed, which is violated in typical RETS data. None of these techniques naturally exploit the temporal information inherent in time series data from the sensor networks. There are correlations among the sensor readings, not only at the same time, but also across time. However, these approaches have not explicitly identified and exploited such correlations. Given these limitations of model-free methods, there has been renewed interest in model-based methods, specifically graphical methods that explicitly reason temporally. The Gaussian Mixture Model (GMM) in a Linear Dynamic System approach assumes that the multi-dimensional test data is a mixture of multi-variate Gaussians, and fits a given number of Gaussian clusters with the help of the wellknown Expectation Maximization (EM) algorithm. The parameters thus learned are used for calculating the joint distribution of the observations. However, this GMM assumption is essentially an approximation and signals the potential viability of non-parametric density estimators. This is the key idea underlying the new approach.

Solano, Wanda↗

Coupled social and infrastructure approaches for enhancing solar energy adoption. Final Report

The goal of this project was to work with rural electric cooperatives to facilitate the diffusion of solar energy adoption in households located in the rural and semi-urban areas of Virginia by identifying social and behavioral factors that might be unique to rural regions; and develop a model to calculate the solar adoption propensity score for household based on their demographics, social and behavioral characteristics which would provide an objective metric to cooperatives that can be further used to do targeted marketing of rooftop solar panels. This was achieved through the following tasks: (1) Conducted a survey of the members of Virginia electric cooperatives to identify demographic, social, financial and behavioral attributes of individuals who are likely to adopt rooftop solar panels. (2) Developed a highly detailed, data-driven, agent-based model of the population of Virginia, focusing on the rural regions. (3) Developed diffusion models that use social, behavioral, and demographic factors, and peer effects to study their impact on solar adoption in rural areas. (4) Built a prototype tool based on the diffusion model to help study market segmentation in rural areas and made it available to National Rural Electric Cooperative Association (NRECA). (5) Results and recommendations derived from the model were provided to NRECA to be shared with participating cooperatives. (6) Results were published in peer reviewed journals, conference proceedings and book chapters, and ideas disseminated through presentations and newsletters. There were several important methodological contributions made under this project which are detailed in the published papers, including: (1) Built a decision-adjusted model for predicting adoptors with imbalanced training data; (2) designed seeding strategies to maximize adoption given a fixed budget; (3) built a methodology to compare different agent based models; (4) created models to identify important factors that influence decision to adopt solar panels; and (5) built a methodology for building household profiles of solar generation to study the duck curve phenomenon. The team included members from the University of Virginia (lead), National Rural Electric Cooperative Association (NRECA), Arizona State University, Virginia Tech and Sandia National Laboratory. Note that no individual entity or stakeholder has incentive to promote solar in rural regions. Most of the research and work focuses around urban regions where the potential for growth in solar adoption is higher due to higher population density. This puts rural areas at a disadvantage. By improving the diffusion of solar adoption in rural parts of the country, we can not only provide clean energy to rural areas but also promote job growth and improves energy independence.

14 SOLAR ENERGY↗

Machine learning from RANS and LES to inform coarse grid simulations

Nuclear system thermal hydraulic analysis has historically relied on computationally inexpensive 1D codes. However, such tools are unable to capture multiscale multidimensional effects in large nuclear reactor enclosures. On the other hand, simulations with higher fidelity can be too expensive for such purposes. One of the ways to reduce computational cost is to perform simulations on a coarse grid, which, unfortunately, introduces large discretization errors. In this paper, two high-to-low data-driven approaches are investigated: (1) a coarse grid turbulence model to predict eddy viscosity and (2) correction of errors in coarse grid velocity fields. The approaches aim to reduce grid- and turbulence model-induced errors in coarse grid Reynolds-averaged Navier–Stokes (RANS) simulations. Two sources of high-fidelity data, RANS and large eddy simulations (LES), are explored. To extract the eddy viscosity from the LES data, an inverse optimization problem is solved. However, the LES eddy viscosity is shown to be comparable to the RANS eddy viscosity in terms of error reduction. Therefore, the directly available RANS eddy viscosity was used to develop a coarse grid data-driven turbulence model. Additionally, error correction in velocity is used to reduce the remaining uncertainties and bring the results closer to reality. In conclusion, the performance of the frameworks is demonstrated for a scaled upper plenum of a gas-cooled reactor facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Satellite Observation of El Nino Effects on Amazon Forest Phenology and Productivity

Climate variability may affect the functioning of Amazon moist tropical forests, and recent modeling analyses suggest that the carbon dynamics of the region vary interannually in response to precipitation and temperature anomalies. However, due to persistent orbital and atmospheric artifacts in the satellite record, remote sensing observations have not provided quantitative evidence that climate variation affects Amazon forest phenology or productivity, We developed a method to minimize and quantify non-biological artifacts in NOAA AVHRR satellite data, providing a record of estimated forest phenological variation from 1982-1993. The seasonal Normalized Difference Vegetation Index (NDVI) amplitude (a proxy for phenology) increased throughout much of the basin during El Nino periods when rainfall was anomalously low. Wetter La Nina episodes brought consistently smaller NDVI amplitudes. Using radiative transfer and terrestrial biogeochemical models driven by these satellite data, we estimate that canopy-energy absorption and net primary production of Amazon forests varied interannually by as much as 21% and 18%, respectively. These results provide large-scale observational evidence for interannual sensitivity to El Nino of plant phenology and carbon flux in Amazon forests.

Asner, Gregory P.↗

OPSMODEL, an or-orbit operations simulation modeling tool for Space Station

The 'OPSMODEL' operations-analysis and planning tool simulates on-orbit crew operations for the NASA Space Station, furnishing a quantitative measure of the effectiveness of crew activities in various alternative Station configurations while supporting engineering and cost analyses. OPSMODEL is entirely data-driven; the top-down modeling structure of the software allows the user to control both the content and the complexity level of model definition during data base population. Illustrative simulation samples are given.

Davis, William T.↗

Role of underlying surface, rainstorm and antecedent wetness condition on flood responses in small and medium sized watersheds in the Yangtze River Delta region, China

Floods are becoming more frequent and are hard to control due to the shortage of water conservancy projects in small and medium sized basins, especially in developing regions. Understanding the hydrologic responses and estimated flood characteristics to storm events can help to predict flood disasters and form better effective mitigation and adaptation strategies. Here, using observations of several representative watersheds and Artificial Neural Networks (ANN) and Principal Component Regression (PCR) models, we conducted data-driven analyses to examine the flood responding characteristics. We quantified the relative contributions of the influencing factors to the variation of each flood characteristic. Statistical analysis of the observations shows that the drainage area plays a key role in determining the distribution of lag time and peak discharge. Rainstorm variability has direct influence on floods, and typhoon-induced rainstorms with high total rainfall and rainfall intensity generate higher lag time, flood peak, unit discharge and runoff depth, but lower runoff coefficient. The ANN and PCR models accurately predicted the variations of flood features using the driving factors including physical geographical characteristics, rainstorm features, and antecedent condition. Physical geographic characteristics are key influential factors of lag time, flood peak and runoff coefficient, while the rainstorm features control the magnitude of unit discharge and runoff depth. These results indicate that floods are mainly affected by rainstorm features and physical geographic characteristics in the Yangtze River delta, and it might become more damaging with the increasing rainfall extremes and sprawling impervious surfaces in a changing environment.

54 ENVIRONMENTAL SCIENCES↗

Integrated Workforce Planning Model: A Proof of Concept

Recently, the Workforce and Diversity Management Office at KSC have launched a major initiative to develop and implement a competency/skill approach to Human Resource management. As the competency/skill dictionary is being elaborated, the need for a competency-based workforce-planning model is recognized. A proof of concept for such a model is presented using a multidimensional data model that can provide the data infrastructure necessary to drive intelligent decision support systems for workforce planing. The components of competency-driven workforce planning model are explained. The data model is presented and several schemes that would support the workforce-planning model are presented. Some directions and recommendations for future work are given.

Guruvadoo, Eranna K.↗

Verification, Validation, and Calibration Through a Causal Lens

While typical validation and verification approaches focus on identifying the associations between data elements using statistical and machine learning methods, the novel methods in this paper focus instead on identifying causal relationships between data elements. Statistical and machine-learning-based approaches are strictly data-driven, meaning that they provide quantitative comparison measures between data sets without explicitly considering the hypotheses behind them. This can lead to the erroneous conclusion that, if two data sets are close enough, the models that generated them are similar. In addition, when experimental and simulated data differ to an extent that fails to meet the acceptance criteria, calibration techniques are used to tweak simulation model parameters to reduce the gap between the two types of data. This produces the false expectation that a simulation model will match reality. The methods presented in this paper move away from these strictly data-driven methods for validation and calibration toward more robust, model-driven methods based on causal inference. Causal inference aims to identify the possible mechanisms that might have generated data. Thus, this analysis targets the prediction of the effects when one (or more) of the identified mechanisms are altered. There are many approaches to identify, quantify, and illustrate causal relationships. For the scope of this paper, directed graphs are employed as causal models. If the directed graph lacks cycles, it is known as a directed acyclic graph. A node in such a graph represents an observed data element while a directed edge connecting two nodes represents a causal relationship between two variables. The developed causal methods are designed to extract causal models from simulation models and experimental data. Causal models capture the causal relationships between data elements (e.g., simulated and experimental data). In this context, validation and verification are performed by comparing causal models. The proposed approach does not only inform system analysts on how a simulation model matches real-world data, but also identifies elements of the simulation model that should be revised when discrepancies between simulation and experimental data are observed. Through these causal methods, analysts can identify the portion of the model equation(s) that are behind an edge connecting two variables. Hence, once the structural differences between causal models have been determined, model calibration can occur by changing only those model parameters that impact the identified causal relationships.

97 MATHEMATICS AND COMPUTING↗

Compiler Optimization for Extreme-Scale Scripting

The data-driven task parallelism execution model can support parallel programming models that are well suited for large-scale distributed-memory parallel computing, for example, simulations and analysis pipelines running on clusters and clouds. We describe a novel compiler intermediate representation and optimizations for this execution model, including adaptions of standard techniques alongside novel techniques. These techniques are applied to Swift/T, a high-level scripting language for flexible data flow composition of functions, which may be serial or use lower-level parallel programming models such as MPI and OpenMP. This paper presents preliminary results, indicating that our compiler optimizations reduce communication overhead by 70% to 93% on distributed-memory systems.

Armstrong, Timothy G.↗

Learning likelihood ratios with neural network classifiers

The likelihood ratio is a crucial quantity for statistical inference in science that enables hypothesis testing, construction of confidence intervals, reweighting of distributions, and more. Many modern scientific applications, however, make use of data- or simulation-driven models for which computing the likelihood ratio can be very difficult or even impossible. By applying the so-called “likelihood ratio trick,” approximations of the likelihood ratio may be computed using clever parametrizations of neural network-based classifiers. A number of different neural network setups can be defined to satisfy this procedure, each with varying performance in approximating the likelihood ratio when using finite training data. We present a series of empirical studies detailing the performance of several common loss functionals and parametrizations of the classifier output in approximating the likelihood ratio of two univariate and multivariate Gaussian distributions as well as simulated high-energy particle physics datasets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electromagnetic Shower from Cosmic Muons in NOvA Detector

NO$\nu$A (NuMI Off-Axis $\nu_e$ Appearance) experiment is a neutrino $\nu_\mu \rightarrow \nu_e$ oscillation experiment with a baseline of 810 km. The signature for a $\nu_\mu \rightarrow \nu_e$ oscillation in the far detector is the production of an electromagnetic (EM) shower due to the charge current (CC) interaction of $\nu_e$ with the detector material. Cosmic muon induced electromagnetic showers can serve as a source of EM shower sample that can be used as a data-driven method for validating the EM shower modelling and EM shower identification algorithms at NO$\nu$A. The work reported in the thesis is the first ever implementation of cosmic muon induced EM shower for such a purpose in the NO$\nu$A experiment. We extracted EM shower sample from two sources - muon undergoing bremsstrahlung (Brem) and muon decay in flight to electron (DiF). Brem sample, extracted from cosmic muon, turns out to be a very useful data-driven method for testing EM shower modelling and the part icle identification (PID) algorithms for the detection of $\nu_e$-CC interactions. A new muon removal (MR) technique is developed and applied to remove the muon hits inside the bremsstrahlung shower. However, a complete removal of the muon energy in the event is not possible with high efficiency. DiF induced EM shower, on the other hand, is exactly similar to $\nu_e$-CC EM shower because DiF is a pure electron initiated EM shower. Therefore, DiF EM shower, once extracted, mimicks the shower of a $\nu_e$-CC interaction event. We present the extraction methods for both brem and DiF events in MC and cosmic data in far and near detector of NO$\nu$A and its use in data driven validation of $\nu_e$ EM shower modelling and $\nu_e$ signal selection efficiency across the detector. A systematic uncertainty is also assigned on $\nu_e$ appearance signal selection based on this study to take into account the difference in EM shower modelling in data and MC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An out-of-distribution-aware autoencoder model for reduced chemical kinetics

While detailed chemical kinetic models have been successful in representing rates of chemical reactions in continuum scale computational fluid dynamics (CFD) simulations, applying the models in simulations for engineering device conditions is computationally prohibitive. To reduce the cost, data-driven methods, e.g., autoencoders, have been used to construct reduced chemical kinetic models for CFD simulations. Despite their success, data-driven methods rely heavily on training data sets and can be unreliable when used in out-of-distribution (OOD) regions (i.e., when extrapolating outside of the training set). In this paper, we present an enhanced autoencoder model for combustion chemical kinetics with uncertainty quantification to enable the detection of model usage in OOD regions, and thereby creating an OOD-aware autoencoder model that contributes to more robust CFD simulations of reacting flows.Here, we first demonstrate the effectiveness of the method in OOD detection in two well-known datasets, MNIST and Fashion-MNIST, in comparison with the deep ensemble method, and then present the OOD-aware autoencoder for reduced chemistry model in syngas combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The phytoplankton bloom in the northwestern Arabian Sea during the southwest monsoon of 1979

The present study investigates the biological variability of the northwestern Arabian Sea during the 1979 southwest monsoon by the synthesis of satellite ocean color remote sensing with an analysis of in situ hydrographic and meteorological data sets and the results of wind-driven modeling of upper-ocean circulation. The phytoplankton bloom peaked during August-September, extended from the Oman coast to about 65 deg E, and lagged behind the development of open-sea upwelling by at least 1 mo. The pigment distributions, hydrographic data, and model results all suggest that the boom was driven by spatially distinct upward nutrient fluxes to the euphotic zone forced by the physical processes of coastal upwelling and offshore Ekman pumping. Coastal upwelling was evident from May through September, yielded the most extreme concentrations of phytoplankton biomass, and, along the Arabian coast, was limited to the continental shelf in the promotion of high concentrations of phytoplankton.

Brock, John C.↗

Sizing ramping reserve using probabilistic solar forecasts: A data-driven method

Ramping products have been introduced or proposed in several U.S. power markets to mitigate the impact of load and renewable uncertainties on market efficiency and reliability. Current methods often rely on historical data to estimate the requirements of ramping products and fail to take into account the effects of the latest weather conditions and their uncertainties, which could lead to overly conservative or insufficient requirements. This study proposes a k-nearest-neighbor-based method to give weather-informed estimates of ramping needs based on short-term probabilistic solar irradiance forecasts. Forecasts from multiple sites are employed in conjunction with principal component analysis to derive numerical classifiers to characterize system-level weather conditions. In addition, we develop a data-driven method to optimize the model parameters in a rolling-forward manner. By using real-world data from the California Independent System Operator, we design two metrics to evaluate method performance: 1) frequency of shortage and 2) oversupply of ramping product. Our proposed method presents advantages in comparison with the baseline and a set of benchmark methods: without compromising system reliability, it reduces system ramping requirements by up to 25%, therefore improving both system reliability and economics.

14 SOLAR ENERGY↗

A Comparison of the Age-Spectra from Data Assimilation Models

We use kinematic and diabatic back trajectory calculations, driven by winds from a general circulation model (GCM) and two different data assimilation systems (DAS), to compute the age spectrum at three latitudes in the lower stratosphere. The age-spectra are compared to chemical transport model (CTM) calculations, and the mean ages from all of these studies are compared to observations. The age spectra computed using the GCM winds show a reasonably well-isolated tropics in good agreement with observations; however, the age spectra determined from the DAS differ from the GCM spectra. For the diabatic trajectory calculations, the age spectrum is too broad as a result of too much exchange between the tropics and mid-latitudes. The age spectrum determined using the kinematic trajectory calculation is less broad and lacks an age offset; both of these features are due to excessive vertical dispersion of parcels. The tropical and mid-latitude mean age difference between the diabatically and kinematically determined age-spectra is about one year, the former being older. The CTM calculation of the age spectrum using the DAS winds shows the same dispersive characteristics of the kinematic trajectory calculation. These results suggest that the current DAS products will not give realistic trace gas distributions for long integrations; they also help explain why the mean ages determined in a number of previous DAS driven CTM's are too young compared with observations. Finally, we note trajectory-generated age spectra show significant age anomalies correlated with the seasonal cycles, and these anomalies can be linked to year-to-year variations in the tropical heating rate. These anomalies are suppressed in the CTM spectra suggesting that the CTM transport is too diffusive.

Schoeberl, Mark R.↗

Patient-Specific Mathematical Model of the Clear Cell Renal Cell Carcinoma Microenvironment

The interactions between cells and molecules in the tumor microenvironment can give insight into the initiation and progression of tumors and their optimal treatment options. In this paper, we developed an ordinary differential equation (ODE) mathematical model of the interaction network of key players in the clear cell renal cell carcinoma (ccRCC) microenvironment. We then performed a global gradient-based sensitivity analysis to investigate the effects of the most sensitive parameters of the model on the number of cancer cells. The results indicate that parameters related to IL-6 have high a impact on cancer cell growth, such that decreasing the level of IL-6 can remarkably slow the tumor’s growth.

60 APPLIED LIFE SCIENCES↗

Approximating Nash Equilibrium in Day-ahead Electricity Market Bidding with Multi-agent Deep Reinforcement Learning

In this paper, a day-ahead electricity market bidding problem with multiple strategic generation company (GEN-CO) bidders is studied. The problem is formulated as a Markov game model, where GENCO bidders interact with each other todevelop their optimal day-ahead bidding strategies. Considering unobservable information in the problem, a model-free and data-driven approach, known as multi-agent deep deterministic policy gradient (MADDPG), is applied for approximating the Nash equilibrium (NE) in the above Markov game. The MADDPG algorithm has the advantage of generalization due to the automatic feature extraction ability of the deep neural networks. The algorithm is tested on an IEEE 30-bus system with three competitive GENCO bidders in both an uncongested caseand a congested case. Comparisons with a truthful bidding strategy and state-of-the-art deep reinforcement learning methods including deep Q network and deep deterministic policy gradient (DDPG) demonstrate that the applied MADDPG algorithm can find a superior bidding strategy for all the market participants with increased profit gains. In addition, the comparison with a conventional model-based method shows that the MADDPG algorithm has higher computational efficiency, which is feasible for real-world applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗