Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

UNC EFRC: Fuels from Sunlight (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)

"Fuels from Sunlight" was submitted by the University of North Carolina (UNC) EFRC: Center for Solar Fuels, to the "Life at the Frontiers of Energy Research" video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. The Center for Solar Fuels (UNC) EFRC directed by Thomas J. Meyer is a partnership of scientists from four institutions: UNC (lead), Brookhaven National Laboratory, Georgia Institute of Technology and University of Texas at San Antonio. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Center for Solar Fuels (UNC) is 'to combine the best features of academic and translational research to study light/matter interactions and chemical processes for the efficient collection, transfer, and conversion of solar energy into chemical fuels and electricity.' Research topics are: catalysis (CO2, hydrocarbons, water), electrocatalysis, photocatalysis, photoelectrocatalysis, solar photovoltaic, solar fuels, photonic, solar electrodes, photosynthesis, fuel cells, CO2 (convert), greenhosue gas, hydrogen (fuel), interfacial characterization, novel materials synthesis, charge transport, and self-assembly.

14 SOLAR ENERGY↗

Fabrication of antiferroelectric PLZT films on metal foils

Fabrication of high-dielectric-strength antiferroelectric (AFE) films on metallic foils is technically important for advanced power electronics. To that end, we have deposited crack-free Pb{sub 0.92}La{sub 0.08}Zr{sub 0.95}Ti{sub 0.05}O{sub 3} (PLZT 8/95/5) films on nickel foils by chemical solution deposition. To eliminate the parasitic effect caused by the formation of a low-permittivity interfacial oxide, a conductive buffer layer of lanthanum nickel oxide (LNO) was coated by chemical solution deposition on the nickel foil before the deposition of PLZT. Use of the LNO buffer allowed high-quality film-on-foil capacitors to be processed in air. With the PLZT 8/95/5 deposited on LNO-buffered Ni foils, we observed field- and thermal-induced phase transformations of AFE to ferroelectric (FE). The AFE-to-FE phase transition field, E{sub AF} = 225 kV/cm, and the reverse phase transition field, E{sub FA} = 190 kV/cm, were measured at room temperature on a {approx}1.15 {mu}m-thick PLZT 8/95/5 film grown on LNO-buffered Ni foils. The relative permittivities of the AFE and FE states were {approx}600 and {approx}730, respectively, with dielectric loss {approx}0.04 at room temperature. The Curie temperature was {approx}210 deg. C. The thermal-induced transition of AFE-to-FE phase occurred at {approx}175 deg. C. Breakdown field strength of 1.2 MV/cm was measured at room temperature.

36 MATERIALS SCIENCE↗

Unraveling the multi-step crystallization mechanism of polytetrafluoroethylene, modified polytetrafluoroethylene, and their nanocomposites with boron nitride nanobarbs: Experimental insights and theoretical analysis

The non-isothermal crystallization behavior and kinetics of polytetrafluoroethylene (PTFE) composites with boron nitride nanobarb (BNNB), a new generation nanostructure with unique surface morphology and mechanical “barbs” have been analyzed, understanding these properties is essential for their high-end applications as thermal interface materials (TIM) for microwave, 5G and microelectronic devices. The analysis of the crystallization parameters includes crystallization onset, peak and end temperatures, crystallization half-life and overall crystallinity of PTFE, modified PTFE and their BNNB composites. The results were further analyzed using theoretical models such as the combined Avrami-Ozawa model. It was found that BNNB supports crystallization in the modified PTFE but shows minimal effect on the crystallization of PTFE. Due to the limitation of the classical theoretical models used above in fully characterizing the multi-step crystallization process of PTFE, an in-depth analysis using the model-free advanced isoconversional computation was used to characterize the PTFE crystallization based on the evolution of activation energy with fractional crystallinity and for the first time with temperature. Three kinetic regions were identified in the crystallization mechanism. Here, this study investigated the molecular organization and microstructural evolution of PTFE, modified PTFE and their composites during non-isothermal crystallization using advanced X-ray scattering measurements. An insight into the changes undergone by the material's microstructural units including crystallite size and morphology, lamellar thickness and lamellar interfacial layer thickness, and crystallographic phase dynamics during non-isothermal cooling from the melt, was provided here in this work. The effect of copolymer modification of PTFE and the inclusion of pristine and functionalized BNNB (a thermally conductive and electrically insulating ceramic) are both new investigations that provide valuable knowledge for the development of materials with strong matrix-nanofiller interaction and guidance for optimizing sintering and cooling cycles, two key steps in PTFE processing that largely affect the material microstructural features. Overall, the result of the three-part investigation demonstrates that BNNB supports crystallization in the modified PTFE up to 20 wt% concentration and at low and high cooling rates typically used in the industrial processing of PTFE.

36 MATERIALS SCIENCE↗

Tuning Block Polymer Structure, Properties, and Processability for the Design of Efficient Nanostructured Materials Systems

Block polymers (BPs) are ideal building blocks for nanoporous membranes, microelectronics templates, energy storage devices, and other technologies. For these systems, precise control over morphology, properties, and processability are essential to optimize performance. The Epps group has used a multidisciplinary approach to control BP nanostructure ordering and orientations, order-disorder and glass transition temperatures, and mechanical and transport properties through the informed manipulation of BP effective segregation strengths and interfacial energetics. For example, alterations in macromolecular interactions between BP chains were achieved through the introduction of composition gradients between copolymer blocks or by adding dopants. In thin films, high-throughput approaches were designed to modify and characterize substrate-polymer interactions, and solvent annealing techniques were developed to facilitate nanoscale alignment and ordering. Finally, by manipulating BP interfacial energetics to gain exquisite tunability of nanostructures and materials' properties, the group is accelerating the development of next-generation BPs that will be harnessed to fabricate inexpensive, efficient, and high-performance devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase-field modeling of void evolution and swelling in materials under irradiation

Void swelling is an important phenomenon observed in both nuclear fuels and cladding materials in operating nuclear reactors. In this work we developed a phase-field model to simulate the void nucleation, growth, and the change of void volume fraction. Important material processes including the generation of defects such as vacancies and self-interstitials, their diffusion and annihilation, and void nucleation and evolution have been taken into account in our phase-field model. The thermodynamic and kinetic properties such as chemical free energy, interfacial energy, vacancy mobility, and annihilation rate of vacancies and interstitials are generally expressed as functions of the temperature. The developed model enables one to parametrically study critical void nucleus size, void growth kinetics, and void volume fraction evolutions. Our simulations demonstrated that the volume swelling displays a quasi-bell shape distribution with temperature that was often observed in experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In situ preparation of visible-light-driven carbon quantum dots/NaBiO 3 hybrid materials for the photoreduction of Cr(VI)

Here, different carbon quantum dots (CQDs)/NaBiO 3 hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO 3 nanosheets by the hydrothermal process. Compared with that of the pure NaBiO 3 nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO 3 catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO 3 nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO 3 composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO 3 , which made NaBiO 3 nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.

54 ENVIRONMENTAL SCIENCES↗

Differences in the Interfacial Mechanical Properties of Thiophosphate and Argyrodite Solid Electrolytes and Their Composites

Interfacial mechanics are a significant contributor to the performance and degradation of solid-state batteries. Spatially resolved measurements of interfacial properties are extremely important to effectively model and understand the electrochemical behavior. Herein, we report the interfacial properties of thiophosphate (Li 3 PS 4 )- and argyrodite (Li 6 PS 5 Cl)-type solid electrolytes. Using atomic force microscopy, we showcase the differences in the surface morphology as well as adhesion of these materials. Additionally we investigate solvent-less processing of hybrid electrolytes using UV-assisted curing. Physical, chemical, and structural characterizations of the materials highlight the differences in the surface morphology, chemical makeup, and distribution of the inorganic phases between the argyrodite and thiophosphate solid electrolytes.

36 MATERIALS SCIENCE↗

Surface transformation by a “cocktail” solvent enables stable cathode materials for sodium ion batteries

Coating the surfaces of active materials has become an effective and indispensable path towards the stable operation of practical rechargeable batteries. Improving the affordability of coating processes can bring enormous manufacturing advantages to battery applications. Here in this paper, we report a cheap, simple and efficient method to create conformal coating layers on the primary particles of sodium layered oxide materials for improving battery performance. Mimicking the cathode–electrolyte interfacial reaction in practical cells, we create conformal coating layers via the spontaneous reaction between the oxidative cathode surfaces and a cocktail of reductive organic solvents. The conformal coating layers consist of metal–organic compounds with reduced transition metal cations, i.e., artificial cathode–electrolyte interphases (CEIs). The cells containing these coated cathode materials deliver much improved cycle life while maintaining reasonably high reversible capacity and rate capability. Furthermore, the structural stability and water resistance are enhanced, which can practically help simplify the storage protocol of cathode powders prior to battery manufacturing. The surfaces of most oxide cathode materials (e.g., lithium cathodes and sodium cathodes) are highly oxidative, and thus we expect that the present method, with tailored experimental parameters, can be readily applied to most battery systems.

25 ENERGY STORAGE↗

Enhanced piezoelectricity in plastically deformed nearly amorphous Bi{sub 12}TiO{sub 20}-BaTiO{sub 3} nanocomposites

Bulk Bi{sub 12}TiO{sub 20}-BaTiO{sub 3} (BTO-BT) nanocomposites are fabricated through the high-temperature interfacial reaction between nanometer-sized BaTiO{sub 3} particles and melting Bi{sub 12}TiO{sub 20}. Although the obtained BTO-BT nanocomposites are nearly amorphous and display very weak ferroelectricity, they exhibit relatively strong piezoelectricity without undergoing the electrical poling process. The volume fraction of crystalline Bi{sub 12}TiO{sub 20} is reduced to less than 10%, and the piezoelectric constant d{sub 33} is enhanced to 13 pC/N. Only the presence of the macroscopic polar amorphous phases can explain this unusual thermal stable piezoelectricity. Combining the results from X-ray diffraction, Raman spectroscopy, and thermal annealing, it can be confirmed that the formation of macroscopic polar amorphous phases is closely related to the inhomogeneous plastic deformation of the amorphous Bi{sub 12}TiO{sub 20} during the sintering process. These results highlight the key role of plastically deformed amorphous Bi{sub 12}TiO{sub 20} in the Bi{sub 12}TiO{sub 20}-based polar composites, and the temperature gradient driven coupling between the plastic strain gradient and polarization in amorphous phases is the main poling mechanism for this special type of bulk polar material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A one-dimensional time-dependent model for studying oxide film growth on metallic surfaces

Corrosion resistance of industrial metals and alloys is largely imparted by the formation of a stable oxide film on the surface that kinetically limits the process of corrosion. Developing a fundamental knowledge of the processes involved in the oxide layer formation and growth is thus important for designing corrosion-resistant alloys. In this work, a model for oxide growth tracking two species (the oxygen and metal vacancies) was presented. The model accounted for species transport and interfacial chemistry. The potential profile was obtained by solving the Poisson equation without needing to invoke the typical linear assumption. Moreover, the fully time-dependent concentration and potential profiles were obtained and the oxide thickness was allowed to evolve by allowing the movement of the domain boundaries at either end. The results were analyzed and the effects of different parameters on the model were discussed.

36 MATERIALS SCIENCE↗

Nanowire Array Structures for Photocatalytic Energy Conversion and Utilization: A Review of Design Concepts, Assembly and Integration, and Function Enabling

The increasing human demand for clean and renewable energy and a cleaner environment has stimulated various materials related research and development for efficient solar energy conversion and utilization, photocatalytic environmental remediation, and photoassisted selective conversion of organic compounds. Among the various candidate solutions to improving the efficiency of these processes, semiconductor nanowire (NW) and nanorod (NR) array structures have been offering a unique tool box combining desirable characteristics in structure, function, and applicability. Efficient photocatalytic energy conversion requires excellent light absorption, readily charge separation, transport, and collection, as well as fast kinetics of interfacial reactions and mass transport of reactants. The long axis of the NW enables adequate light absorption, while the radical axis provides short electron–hole separation distance. Additionally, the NW arrays have relatively high surface area to facilitate interfacial kinetics while their open pore structure allows good mass transport properties. This study reviews the current status of research on NW and NR array structures of some most popular semiconducting materials for photocatalytic energy conversion and utilization including photocatalytic water splitting and CO 2 reduction/fixation, dye/quantum dot sensitized solar cells, and other photoassisted reactive applications such as pollutant degradation, selective conversion of organic compounds, and biological disinfection.

Hoang, Son↗

Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint

Electron beam welding experiments of TA15 titanium alloy to GH600 nickel superalloy with and without a copper sheet interlayer were carried out. Surface appearance, microstructure and phase constitution of the joint were examined by optical microscopy, scanning electron microscopy and x-ray diffraction analysis. Mechanical properties of Ti/Ni and Ti/Cu/Ni joint were evaluated based on tensile strength and microhardness tests. The results showed that cracking occurred in Ti/Ni electron beam weldment for the formation of brittle Ni-Ti intermetallics, while a crack-free electron beam-welded Ti/Ni joint can be obtained by using a copper sheet as filler metal. The addition of copper into the weld affected the welding metallurgical process of the electron beam-welded Ti/Ni joint significantly and was helpful for restraining the formation of Ti-Ni intermetallics in Ti/Ni joint. The microstructure of the weld was mainly characterized by a copper-based solid solution and Ti-Cu interfacial intermetallic compounds. Ti-Ni intermetallic compounds were almost entirely suppressed. The hardness of the weld zone was significantly lower than that of Ti/Ni joint, and the tensile strength of the joint can be up to 282 MPa.

36 MATERIALS SCIENCE↗

Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport

We report that while Li-ion cells offer excellent electrochemical performance for several applications including electric vehicles, they also exhibit poor thermal transport characteristics, resulting in reduced performance, overheating and thermal runaway. Inadequate heat removal from Li-ion cells originates from poor thermal conductivity within the cell. This paper identifies the rate-limiting material-level process that dominates overall thermal conduction in a Li-ion cell. Results indicate that thermal characteristics of a Li-ion cell are largely dominated by heat transfer across the cathode-separator interface rather than heat transfer through the materials themselves. This interfacial thermal resistance contributes around 88% of total thermal resistance in the cell. Measured value of interfacial resistance is close to that obtained from theoretical models that account for weak adhesion and large acoustic mismatch between cathode and separator. Further, to address this problem, an amine-based chemical bridging of the interface is carried out. This is shown to result in in four-times lower interfacial thermal resistance without deterioration in electrochemical performance, thereby increasing effective thermal conductivity by three-fold. This improvement is expected to reduce peak temperature rise during operation by 60%. Finally, by identifying and addressing the material-level root cause of poor thermal transport in Li-ion cells, this work may contribute towards improved thermal performance of Li-ion cells.

36 MATERIALS SCIENCE↗

Electromigration study of copper lines on steps prepared by a plasma-based etch process

The electromigration phenomenon of the copper line etched with a plasma-based process over the SiN{sub x} step has been investigated. Two important factors, i.e., the dielectric topography and the stress temperature, were examined using the accelerated isothermal electromigration method. The activation energy of 0.73 eV to 0.89 eV indicates two possible mass transport pathways: interfacial and copper surface diffusions. The copper line on the SiN{sub x} step has a shorter lifetime and a smaller activation energy than the copper line on the flat surface has. For the former, voids were formed at the cusp region and perpendicular to the current flow direction. For the latter, voids were formed in series and parallel to the current flow direction. The ''neck'' structure at the cusp region, which is a result of the inappropriate etching condition, further decreased the lifetime and the activation energy. The lifetime of the ''neck-free'' copper line over the SiN{sub x} step was estimated to be 7.1 x 10{sup 9} s under the high-speed IC operation condition. The thermal stress mismatch between the copper layer and TiW barrier layer as well as the underneath dielectric layer facilitated the void formation. The step effect on the lifetime was reduced when the test temperature was high because of the change of the local stress. In summary, the topography and the test temperature are critical factors for the copper line's lifetime.

36 MATERIALS SCIENCE↗

Tailoring the growth and electronic structures of organic molecular thin films

In the rapidly developing electronics industry, it has become increasingly necessary to explore materials that are cheap, flexible and versatile which have led to significant research efforts towards organic molecular thin films. Organic molecules are unique compared to their inorganic atomic counterparts as their properties can be tuned drastically through chemical functionalization, offering versatility, though their extended shape and weak intermolecular interactions bring significant challenges to the control of both the growth and the electronic structures of molecular thin films. Herein, we will review the self-assembly process and how to establish long-range ordered organic molecular thin films. We will also discuss how the electronic structures of thin films are impacted by the molecule’s local electrostatic environment and its interaction with the substrate, within the context of controlling interfacial energy level alignment between organic semiconductors and electrodes in electronic devices.

36 MATERIALS SCIENCE↗

Solid electrolytes for solid-state and lithium-sulfur batteries

The stringent demands placed on batteries by emerging vehicle technologies such as plug-in and battery electric vehicles suggest that improvements in the safety and performance of electrochemical energy storage devices, as well as concurrent reductions in their cost, are highly desirable. Current strategies for improving performance have largely focused on Li-ion battery chemistries. In this project went beyond the state of the art by pursuing electrolyte chemistries that will enable the use of Li metal anodes and sulfur cathodes, either concurrently in a solid state Li-S battery, or as a means to achieve a Li metal anode which is stable upon cycling. More specifically, our effort advanced strategies to enable Li metal anodes for myriad beyond Li-ion chemistries . LLZO garnet (Li 7 La 3 Zr 2 O 12 ) is the first bulk-scale ceramic electrolyte to exhibit the combination of superionic conductivity (1mS/cm at 298K), high shear modulus (61 GPa) to suppress Li dendrite penetration, and apparent electrochemical stability (0-6V vs Li/Li + ), thus enabling Li metal anodes. However, to date there are no reports confirming LLZO can tolerate current densities > 1mA/cm 2 , thus demonstrating relevance to PHEV/EV batteries. Our goal was to investigate the mechanisms that govern the Li-LLZO interfacial stability as a function of current density. We determined that defects in polycrystalline LLZO reduce the critical current density (CCD). Primarily contaminants on the LLZO surface and grain boundaries were the primary defects the limited the CCD. Using our experience with synthesis and processing (Sakamoto and Wolfenstine) and sophisticated materials characterization (Nanda), we precisely controlled atomistic and microstructural defects and correlated their effects on controlling the critical current density. These data fed into multi-scale computation models (Siegel and Monroe) to isolate and quantify the roles that each defect played in controlling the critical current density. Bridging this knowledge gap allowed us to demonstrate that LLZO can withstand > 1mA/cm 2 .

25 ENERGY STORAGE↗

Microstructure and Interfacial Shear Strength in W/(Zr{sub 55}Cu{sub 30}Al{sub 10}Ni{sub 5}){sub 100−x}Nb{sub x} Composites

In the present study, (Zr{sub 55}Cu{sub 30}Al{sub 10}Ni{sub 5}){sub 100−x}Nb{sub (x=0,1,2,3)} bulk metallic glass matrix/tungsten wire composites were fabricated by a gas pressure infiltration process at temperature 950 °C for 5 min. Microstructural studies and mechanical behaviors of the materials have been investigated by scanning electron microscopy, transmission electron microscopy and pullout tests. The mechanical results showed that the interface shear strength in the composite sample with X = 2 increased more than twice compared to the composite sample with X = 0. Based on the microstructural results, the addition of two atomic percent Nb in the matrix composite causes an increase in the diffusion band thickness during the melt infiltration and change in the interface fracture mode as a result of pullout test.

36 MATERIALS SCIENCE↗

Understanding interfacial chemistry of positive bias high-voltage degradation in photovoltaic modules

Photovoltaic module degradation from a high system voltage is a prevalent degradation mode in the field, where the enabling degradation mechanisms are inherently dependent on the voltage bias polarity of the installed system. In this study, the effects of positive bias on module performance are confirmed and the underlying chemical degradation processes are more thoroughly investigated to reveal different degradation pathways from those previously reported in negative bias studies. When cells are under +1000 V stress, crystalline silicon mini-modules with poly(ethylene-co-vinyl acetate) (EVA) encapsulant demonstrated a significant photocurrent loss due to EVA discoloration and delamination from increased chemical reactivity at the front-side EVA/cell metallization interface. Brown discoloration of the EVA encapsulant near the cell gridlines is linked to an electrochemical reaction at the Ag gridlines under hot and humid conditions (85 °C, 85% relative humidity). Chemical compositional analysis using X-ray photoelectron spectroscopy (XPS) confirmed that the discoloration is attributed to the formation of silver sulfide (Ag 2 S) and/or silver oxide (Ag 2 O) species at the EVA/Ag gridline interface. The subsequent migration of Ag ions from the cell gridlines into the bulk of the EVA was evident from XPS depth profiling and optical microscopy. However, the Ag signal was not detected at the EVA/glass interface, inferring limited ionic transport through the nominally 0.45 mm thick encapsulant. For the samples studied herein, the sulfur is believed by the process of elimination to come from the ambient air, diffusing into the module through the permeable polymer backsheet.

14 SOLAR ENERGY↗