Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Correlation of Band Bending and Ionic Losses in 1.68 eV Wide Band Gap Perovskite Solar Cells

Abstract Perovskite solar cells (PSCs) are promising for high‐efficiency tandem applications, but their long‐term stability, particularly due to ion migration, remains a challenge. Despite progress in stabilizing PSCs, they still fall short compared to mature technologies like silicon. This study explores how different piperazinium salt treatments using iodide, chloride, tosylate, and bistriflimide anions affect the energetics, carrier dynamics, and stability of 1.68 eV bandgap PSCs. Chloride‐based treatments achieved the highest power conversion efficiency (21.5%) and open‐circuit voltage (1.28 V), correlating with stronger band bending and n‐type character at the surface. At the same time, they showed reduced long‐term stability due to increased ionic losses. Tosylate‐treated devices offered the best balance, retaining 96.4% efficiency after 1000 h (ISOS‐LC‐1I). These findings suggest that targeted surface treatments can enhance both efficiency and stability in PSCs.

14 SOLAR ENERGY↗

A Crosslinked Ionic Organic Framework for Efficient Iodine and Iodide Remediation in Water

Iodine is widely used as an antimicrobial reagent for water disinfection in the wilderness and outer space, but residual iodine and iodide need to be removed for health reasons. Currently, it is challenging to remove low concentrations of iodine and iodide in water (~5 ppm). Furthermore, the remediation of iodine and iodide across a broad temperature range (up to 90 °C) has not previously been investigated. In this work, we report a nitrate dimer-directed synthesis of a single-crystalline ionic hydrogen-bonded crosslinked organic framework (HCOF-7). HCOF-7 removes iodine and iodide species in water efficiently through halogen bonding and anion exchange, reducing the total iodine concentration to 0.22 ppm at room temperature. Packed HCOF-7 columns were employed for iodine/iodide breakthrough experiments between 23 and 90 °C, and large breakthrough volumes were recorded (≥18.3 L/g). Finally, the high iodine/iodide removal benchmarks recorded under practical conditions make HCOF-7 a promising adsorbent for water treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the Anions on the Interaction Energy between Water and Ionic Liquids

It is essential to understand the interaction energy between water and ionic liquids (ILs) in search of ILs for dehumidification applications. In this paper, the intermolecular interaction energy between water and 1-ethyl-3-methylimidazolium ([EMIM])-based ILs was investigated. The vapor-liquid equilibrium data were first measured for solutions of [EMIM][BF 4 ], [EMIM][N(CN) 2 ], [EMIM][CF 3 SO 3 ], and [EMIM][CH 3 SO 3 ] with water molar fractions of 8–95 % at temperatures of 303–343 K. The IL-IL and water-IL intermolecular interaction energies were determined by using the correlated non-random two-liquid model. The results revealed that fluorine atoms in anions reduce the attraction energy between IL and water, and thus, decrease the water affinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sn-Based Alloys Synthesized in an Ionic Liquid at Room Temperature: Cu6Sn5 as a Case Study

Sn-based alloys are increasingly investigated owing to possible electronic/structural modulations of interest for electrocatalysis and energy storage applications. Here, we report on the use of a chemical system consisting of an ionic liquid (1-ethyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide: [EMIm(+)][TFSI-]) and Sn-based precursor Sn(TFSI)(2) both featuring similar anionic groups. This strategy increases the solubility of the cationic precursor in the IL and avoids the formation of side-products during the precipitation of Sn-nanoparticles formed upon reaction with a reducing agent (NaBH4). Using NMR relaxometry, we further established that these nanoparticles are stabilized by specific interactions with the cationic group of the IL. Targeting the composition Cu6Sn5, we further demonstrated that this approach can be used to prepare Sn-based alloys which could not be prepared using conventional chloride-based precursors.

cyclic voltammetry↗

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of Water Vapor on the Electrochemical Shift of an Ionic Liquid Measured by Ambient Pressure X-ray Photoelectron Spectroscopy

Ionic liquids (ILs) are considered to be one of the steppingstones to fabricate next generation electrochemical devices given their unique physical and chemical properties. The addition of water to ILs significantly impact electrochemical related properties including viscosity, density, conductivity, and electrochemical window. Here, we utilize ambient pressure X-ray photoelectron spectroscopy (APXPS) to examine the impact of water on values of the electrochemical shift (S), which is determined by measuring changes in binding energy shifts as a function of an external bias. APXPS spectra of C 1s, O 1s and N 1s regions are examined for the IL 1-butyl-3-methylimidazolium acetate, [C 4 mim][OAc], at the IL/gas interface as a function of both water vapor pressure and external bias. Results reveal that in the absence of water vapor there is an IL ohmic drop between the working electrode and quasi reference electrode, giving rise to chemical specific S values of less than one. Upon introducing water vapor, S values approach one as a function of increasing water vapor pressure, indicating a decrease in the IL ohmic drop as the IL/water mixture becomes more conductive and the potential drop is driven by the electric double layer at the electrode/IL interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Insights into the Demethylation of Lignin‐Derived Structures Using Protic Ionic Liquids: A Density Functional Theory Study

Lignin valorization is restricted by the stability of its methoxy groups, creating a critical need for efficient demethylation strategies. Here, in this study, density functional theory (DFT) is employed to dissect the mechanistic pathways of demethylation in lignin model compounds, guaiacol and syringol, using protic ionic liquids (PILs) that act as both solvent and catalyst. Conductor‐like Screening Model for Real Solvents (COSMO‐RS) analysis identifies monoethanolammonium acetate ([MEOA][Ace]) as the most promising medium, attributed to its strong hydrogen bonding network and solvation ability. By integrating implicit and explicit solvation models, it is revealed that an acid‐catalyzed hydrolytic mechanism governs demethylation, with PILs stabilizing crucial transition states and intermediates. Complementary electronic structure evaluations, including highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gap analysis, charge distribution, and electrostatic potential mapping, demonstrate how PILs lower energetic barriers and enhance reactivity. To simulate realistic environments, this study is extended to lignin dimer complexes with varying water content, uncovering how water‐bridged solvation reverses demethylation preference from guaiacyl to syringyl units. This mechanistic shift aligns with experimental observations showing faster S‐unit reactivity in hydrated systems. Together, these findings provide atomic‐level insight into lignin demethylation dynamics and highlight how tuning acid concentration in PILs can accelerate kinetics, enabling a rational pathway toward next‐generation biomass conversion technologies.

COSMO-RS↗

Structure and Dynamics of Imidazolium in an Ionic Liquid-PEGDA Iongel via IR, 2D-IR, and NMR Spectroscopy

Fourier transform infrared (FTIR) absorption spectroscopy, ultrafast two-dimensional infrared (2D-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and density functional theory (DFT) calculations show that, in iongels composed of 1-ethyl-3-methylimidazolium bis(trifluoromethyl\-sulfonyl)imide ([C 2 C 1 Im][Tf 2 N]}) and cross-linked poly(ethylene glycol)diacrylate (cl-PEGDA), imidazolium cations solvate PEGDA chains in tight and loose complexes. H/D isotope substitution at the 2-position of the imidazolium ring simplifies the CH-stretching vibrational bands. Tight complexes are characterized by stronger, directional hydrogen bonding interactions between the 2-position of the imidazolium ring and the ethereal oxygens. The loose complexes resemble bulk ionic liquid (IL) non-specifically perturbed by the PEGDA chains.

ionic liquids, carbon dioxide, cross-linked PEGDA,↗

Ionic-Liquid-Assisted Microwave Synthesis of Solid Solutions of Sr 1– x Ba x SnO 3 Perovskite for Photocatalytic Applications

Nanocrystalline Sr 1–x Ba x SnO 3 (x = 0, 0.2, 0.4, 0.8, 1) perovskite photocatalysts were prepared by microwave synthesis in an ionic liquid (IL) and subsequent heat-treatment. The influence of the Sr/Ba substitution on the structure, crystallization, morphology, and photocatalytic efficiency was investigated and the samples were fully characterized. On the basis of X-ray diffraction results, as the Ba content in the SrSnO 3 lattice increases, a symmetry increase was observed from the orthorhombic perovskite structure for SrSnO 3 to the cubic BaSnO 3 structure. The analysis of the sample morphology by SEM reveals that the Sr 1–x Ba x SnO 3 samples favor the formation of nanorods (500 nm–5 μm in diameter and several micrometers long). The photophysical properties were examined by UV/Vis diffuse reflectance spectroscopy. The band gap decreases from 3.85 to 3.19 eV with increasing Ba 2+ content. Furthermore, the photocatalytic properties were evaluated for the hydroxylation of terephthalic acid (TA). The order of the activities for TA hydroxylation was Sr 0.8 Ba 0.2 SnO 3 > SrSnO 3 > BaSnO 3 > Sr 0.6 Ba 0.4 SnO 3 > Sr 0.2 Ba 0.8 SnO 3 . Here, the highest photocatalytic activity was observed for Sr 0.8 Ba 0.2 SnO 3 , and this can be attributed to the synergistic impacts of the modification of the crystal structure and morphology, the relatively large surface area associated with the small crystallite size, and the suitable band gap and band-edge position.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Operando Calorimetric Measurements for Activated Carbon Electrodes in Ionic Liquid Electrolytes under Large Potential Windows

This study aims to investigate the effect of the potential window on heat generation in carbon-based electrical double layer capacitors (EDLCs) with ionic-liquid (IL)-based electrolytes using in operando calorimetry. The EDLCs consisted of two identical activated-carbon electrodes with either neat 1-butyl-1-methylpyrrolidinium bis(trifluoromethane-sulfonyl)imide ([Pyr 14 ][TFSI]) electrolyte or 1.0 m [Pyr 14 ][TFSI] in propylene carbonate (PC) as electrolyte. The instantaneous heat generation rate at each electrode was measured under galvanostatic cycling for different potential windows ranging from 1 to 4 V. First, the heat generation rates at the positive and negative electrodes differed significantly in neat IL owing to the differences in the ion sizes and diffusion coefficients. However, these differences were minimized when the IL was diluted in PC. Second, for EDLC in neat [Pyr 14 ][TFSI] at high potential window (4 V), a pronounced endothermic peak was observed at the beginning of the charging step at the positive electrode owing to TFSI - intercalation in the activated carbon. On the other hand, for EDLC in 1.0 m [Pyr 14 ][TFSI] in PC at potential window above 3 V, an endothermic peak was observed only at the negative electrode owing to the decomposition of PC. Third, for both neat and diluted [Pyr 14 ][TFSI] electrolytes, the irreversible heat generation rate increased with increasing potential window and exceeded Joule heating. This was attributed to the effect of potential-dependent charge redistribution resistance. Additionally, a further increase in the irreversible heat generation rate was observed for the largest potential windows owing to the degradation of the PC solvent. Finally, for both types of electrolyte, the reversible heat generation rate increased with increasing potential window because of the increase in the amount of ion adsorbed/desorbed at the electrode/electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surpassing the Performance of Phenolate-derived Ionic Liquids in CO 2 Chemisorption by Harnessing the Robust Nature of Pyrazolonates

Superbase-derived ionic liquids (SILs) are promising sorbents to tackle the carbon challenge featured by tunable interaction strength with CO 2 via structural engineering, particularly the oxygenate-derived counterparts (e. g., phenolate). However, for the widely deployed phenolate-derived SILs, unsolved stability issues severely limited their applications leading to unfavorable and diminished CO 2 chemisorption performance caused by ylide formation-involved side reactions and the phenolate-quinone transformation via auto-oxidation. Here, in this work, robust pyrazolonate-derived SILs possessing anti-oxidation nature were developed by introducing aza-fused rings in the oxygenate-derived anions, which delivered promising and tunable CO 2 uptake capacity surpassing the phenolate-based SIL via a carbonate formation pathway (O-C bond formation), as illustrated by detailed spectroscopy studies. Further theoretical calculations and experimental comparisons demonstrated the more favorable reaction enthalpy and improved anti-oxidation properties of the pyrazolonate-derived SILs compared with phenolate anions. The achievements being made in this work provides a promising approach to achieve efficient carbon capture by combining the benefits of strong interaction strength of oxygenate species with CO 2 and the stability improvement enabled by aza-fused rings introduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Understanding of Charge Storage in MoS 2 Supercapacitors with Ionic Liquids

Owing to high electrical conductivity and ability to reversibly host a variety of inserted ions, 2D metallic molybdenum disulfide (1T-MoS 2 ) has demonstrated promising energy storage performance when used as a supercapacitor electrode. However, its charge storage mechanism is still not fully understood, in particular, how the interlayer spacing of 1T-MoS 2 would affect its capacitive performance. In this work, molecular dynamics simulations of 1T-MoS 2 with interlayer spacing ranging from 0.615 to 1.615 nm have been performed to investigate the resulting charge storage capacity in ionic liquids. Simulations reveal a camel-like capacitance-potential relation, and MoS 2 with an interlayer spacing of 1.115 nm has the highest volumetric and gravimetric capacitance of 118 F cm –3 and 42 F g –1 , respectively. Although ions in MoS 2 with an interlayer spacing of 1.115 nm diffuse much faster than with interlayer spacings of 1.365 and 1.615 nm, the MoS 2 with larger interlayer spacing has a much faster-charging process. Our analyses reveal that the ion number density and its charging speed, as well as ion motion paths, have significant impacts on the charging response. Here, this work helps to understand how the interlayer spacing affects the interlayer ion structures and the capacitive performance of MoS 2 , which is important for revealing the charge storage mechanism and designing MoS 2 supercapacitor.

25 ENERGY STORAGE↗

Direct Electrochemistry and Electrocatalysis of Myoglobin Immobilized on Graphene-CTAB-Ionic Liquid Nanocomposite Film

We have investigated direct electrochemistry and electrocatalysis of myoglobin immobilized on graphene-cetylramethylammonium bromide (CTAB)-ionic liquid nanocomposite film on a glassy carbon electrode. The nanocomposite was characterized by TEM, SEM, XPS, and electrochemistry. It was found that the high surface area of graphene was helpful for immobilizing more proteins and the nanocomposite film can provide a favorable microenvironment for MB to retain its native structure and activity and to achieve reversible direct electron transfer reaction at an electrode. The nanocomposite films also exhibit good stability and catalytic activities for the electrocatalytic reduction of H2O2.

59 BASIC BIOLOGICAL SCIENCES↗

Charge Regulation Stabilizes the Formation of Ionic Liquid‐Based Amphiphilic Oligomer Droplet Interface Bilayers

Amphiphilic charged oligomers (oligodimethylsiloxane – methylimidazolium cation, ODMS-MIM (+) ), assemble into bilayers using the droplet interface bilayer (DIB) platform, possess similar size and functionality as phospholipid bilayers, but exhibit increased stability. The oligomer ionic headgroups (MIM (+) ) are covalently bound to monodisperse, short-chain (n = 13) hydrophobic tails (ODMS). These self-assemble as monolayer brushes at the oil–aqueous interface of water droplets that are influenced by both the charged cationic headgroups, and the nature of the covalently attached tails in the organic phase. Charge regulation (CR) stabilizes the formation of ordered, molecularly close-packed brush phases, which results in highly insulating, stable DIB membranes, with contributions from specific ion-pairing effects, Debye screening, and voltage-dependent electrocompressive stresses. In the oil phase, interactions between hexadecane, a good solvent for ODMS, and the hydrophobic tails result in extended waiting times for bilayer formation compared to phospholipid DIBs, for which hexadecane is a poor solvent. Close agreement between experimental values and predictions for two key parameters, the critical membrane thickness, h c , and maximal grafted headgroup density, Γ 0 , validate an electrostatic CR model consisting of adsorption and partial neutralization of counterions at a charged interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Liquid Aided [ 11 C]CO Fixation for Synthesis of 11 C‐carbonyls

Tributyl(ethyl)phosphonium oxopentenolate ([P 4442 ][Pen]) is an ionic liquid developed to capture CO and has shown ability to catalyze carbonylation reactions in organic chemistry. Carbon-11 ( 11 C, t 1/2 =20.4 min) labeled CO is a highly versatile building block for the synthesis of positron emission tomography (PET) radiotracers that are applied for medical imaging. The use of [ 11 C]CO is limited by its low solubility in organic solvents. Herein, we report a proof-of-concept study evaluating a new method to prepare 11 C-labeled amides, ureas and carbamates via reaction of [ 11 C]CO in [P 4442 ][Pen] and applied for fully automated radiosyntheses of Bruton's tyrosine kinase inhibitors, [ 11 C]evobrutinib and [ 11 C]ibrutinib.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrogen-doped carbons derived from poly(ionic liquid)s with various backbones and cations

In this study, poly(ionic liquid)s (PILs) with various backbone/cation pairings (backbones - ethyl methacrylate, styrene; covalently attached cations - butylimidazolium, trimethylammonium, butylpyrrolidinium) were successfully synthesized as carbon precursors. Pyrolysis of PILs produced carbons with sheet-like structures with a metallic luster in contrast to the powder form of carbons produced from polyacrylonitrile. The results also show that cation type has a significant impact on surface area, graphitic content, graphitic nitrogen content, nitrogen retention, carbon yield and surface chemistry of the PIL-derived carbons. The design of nitrogen-doped carbons based on a diverse set of PILs with various cation and polymer backbone chemistries may be an effective strategy to optimize carbon properties for subsequent application in energy storage devices.

36 MATERIALS SCIENCE↗

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. Finally, in addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.

36 MATERIALS SCIENCE↗

Metal-containing ionic liquid-based, uncharged–charged diblock copolymers that form ordered, phase-separated microstructures and reversibly coordinate small protic molecules

A metal-containing ionic liquid-based, uncharged-charged block copolymer (BCP) system made via RAFT polymerization is presented. Small-angle X-ray scattering studies show these Co(II) bis(salicylate) anion-containing BCPs can form ordered microstructures (including a gyroid phase) in their neat states. Additionally, these BCPs can reversibly coordinate H 2 O or small alcohols with a noticeable color change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗