Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Compositions for, solutions for, and methods of use of siloxane based aromatic trisureas as viscosifiers

A compound represented by the following formula is provided: ##STR00001## Also provided is a solution including a compound disclosed herein, a volume of dense carbon dioxide (CO.sub.2), and a co-solvent, where the solution has an increased viscosity greater than the viscosity of dense CO.sub.2. Methods of increasing the viscosity of dense CO.sub.2 and natural gas liquids (NGLs) by, for example, dissolving a compound disclosed herein to form a solution, are also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Liquid helium management for Gravity Probe-B

The Gravity Probe-B (GP-B) experiment will be degraded if accelerations at a proof mass become larger than one ten billionth g. This makes necessary the management of the configuration and dynamical behavior of the large amount of liquid helium present in the GP-B spacecraft dewar. Three approaches to the solution of this problem are discussed. It is concluded that the most promising technique involves the use of baffles into which the liquid helium can be forced during a relatively high spacecraft rotation period, and in which the liquid helium will be held by capillary forces during the operational period when the rotation rate is much lower. Some likely baffle configurations are suggested.

Schafer, C. F.↗
DOE OSTI2017

Indonesian Highly Enriched Uranium-Bearing Waste Elimination - 17393

The Department of Energy's National Nuclear Security Administration (NNSA) and the Y-12 National Security Complex (Y-12) have been working with PT Industri Nuklir Indonesia (PT Inuki), an Indonesian medical isotope producer, since 2014 to disposition all highly enriched uranium (HEU) stored at the government-owned Research Center for Science and Technology (PUSPIPTEK) near Serpong, Indonesia. To eliminate the 1.5 kilograms of liquid HEU at the facility, Y-12 proposed a method to down-blend the leftover process solutions with a depleted uranium solution made on-site to render low-enriched uranium (LEU). This method is essentially irreversible since the uranium enrichment is degraded using a molecular level of intimate mixing in aqueous solution. This cooperation was tied to a presidential commitment made at the 2016 Nuclear Security Summit to down-blend all remaining HEU in Indonesia by September 2016. While all unirradiated HEU was down-blended to LEU in March 2016, the campaign to down-blend the 1.4 kilograms of irradiated HEU began in late July 2016 and was completed in August, making Indonesia and all of Southeast Asia free of HEU. As part of this cooperation, Y-12 and NNSA also proposed a subsequent disposition option for the LEU solution whereby the irradiated and unirradiated solutions will be chemically manipulated to prepare a dry LEU oxide suitable for interim storage and yield a uranium-free liquid stream that can be discarded as radioactive waste. In the fall of 2016, Y-12 and NNSA plan to begin developing the LEU solution disposition methodology with the Indonesian facility using small-scale batch-wise methods within existing hot cells, involving straightforward precipitation, ion exchange, decantation, and calcination methods. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

Crystal growth under external electric fields

This is a review article concerning the crystal growth under external electric fields that has been studied in our lab for the past 10 years. An external field is applied electrostatically either through an electrically insulating phase or a direct injection of an electric current to the solid-interface-liquid. The former changes the chemical potential of both solid and liquid and controls the phase relationship while the latter modifies the transport and partitioning of ionic solutes in the oxide melt during crystallization and changes the solute distribution in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Thermodynamic assessment of the hollandite high‐level radioactive waste form

Abstract Hollandite has been studied as a candidate ceramic waste form for the disposal of high‐level radioactive waste due to its inherent leach resistance and ability to immobilize alkaline‐earth metals such as Cs and Ba at defined lattice sites in the crystallographic structure. The chemical and structural complexity of hollandite‐type phases developed for high‐level waste immobilization limits the systematic experimental research that is required to understand phase development due to the large number of potential additives and compositional ranges that must be evaluated. Modeling the equilibrium behavior of the complex hollandite‐forming oxide waste system would aid in the design and processing of hollandite waste forms by predicting their thermodynamic stability. Thus, a BaO–Cs 2 O–TiO 2 –Cr 2 O 3 –Al 2 O 3 –Fe 2 O 3 –FeO–Ga 2 O 3 thermodynamic database was developed in this work according to the CALPHAD methodology. The compound energy formalism was used to model solid solution phases such as hollandite while the two‐sublattice partially ionic liquid model characterized the oxide melt. Results of model optimizations are presented and discussed including a 1473 K isothermal BaO–Cs 2 O–TiO 2 pseudo‐ternary diagram that extrapolates phase equilibrium behavior to regions not experimentally explored.

Utlak, Stephen A.↗
DOE OSTI2018

Electrolyte Solvation Structure at Solid/Liquid Interface Probed by Nanogap Surface-Enhanced Raman Spectroscopy

Understanding the fundamental factors that drive ion solvation structure and transport is key to design high performance, stable battery electrolytes. Reversible ion solvation and desolvation are critical to the interfacial charge transfer process across the solid-liquid interface as well as the resulting stability of the solid electrolyte interphase (SEI). Here in this paper, we report the first study of Li+ salt solvation structure in aprotic solution in the immediate vicinity (~ 20 nm) of the solid electrode-liquid interface using surface-enhanced Raman spectroscopy (SERS) from a gold nanoparticle (Au NP) monolayer. The plasmonic coupling between Au NPs produces strong electromagnetic field enhancement in the gap region, leading to 5 orders of magnitude increase in Raman intensity for electrolyte components and their mixtures namely, lithium hexafluorophosphate (LiPF6), fluoroethylene carbonate (FEC), ethylene carbonate (EC) and diethyl carbonate (DEC). Further, we estimate and compare the lithium-ion solvation number derived from SERS and Infra-Red (FTIR) spectroscopy experiments to monitor and ascertain the changes in the solvation shell diameter in the confined nanogap region where there is maximum enhancement of the electric field. Our findings provide a new multi-modal spectroscopic approach to gain fundamental insights into the molecular structure of the electrolyte at the solid-liquid interface.

25 ENERGY STORAGE↗
DOE OSTI2023

Numerical Study of Coupled Water and Vapor Flow, Heat Transfer, and Solute Transport in Variably-Saturated Deformable Soil During Freeze-Thaw Cycles

As climate change intensifies, soil water flow, heat transfer, and solute transport in the active, unfrozen zones within permafrost and seasonally frozen ground exhibit progressively more complex interactions that are difficult to elucidate with measurements alone. For example, frozen conditions impede water flow and solute transport in soil, while heat and mass transfer are significantly affected by high thermal inertia generated from water-ice phase change during the freeze-thaw cycle. To assist in understanding these subsurface processes, the current study presents a coupled two-dimensional model, which examines heat conduction-convection with water-ice phase change, soil water (liquid water and vapor) and groundwater flow, advective-dispersive solute transport with sorption, and soil deformation (frost heave and thaw settlement) in variably saturated soils subjected to freeze-thaw actions. This coupled multiphysics problem is numerically solved using the finite element method. The model's performance is first verified by comparison to a well-documented freezing test on unsaturated soil in a laboratory environment obtained from the literature. Then based on the proposed model, we quantify the impacts of freeze-thaw cycles on the distribution of temperature, water content, displacement history, and solute concentration in three distinct soil types, including sand, silt and clay textures. The influence of fluctuations in the air temperature, groundwater level, hydraulic conductivity, and solute transport parameters was also comparatively studied. The results show that (a) there is a significant bidirectional exchange between groundwater in the saturated zone and soil water in the vadose zone during freeze-thaw periods, and its magnitude increases with the combined influence of higher hydraulic conductivity and higher capillarity; (b) the rapid dewatering ahead of the freezing front causes local volume shrinkage within the non-frozen region when the freezing front propagates downward during the freezing stage and this volume shrinkage reduces the impact of frost heave due to ice formation. This gradually recovers when the thawed water replenishes the water loss zone during the thawing stage; and (c) the profiles of soil moisture, temperature, displacement, and solute concentration during freeze-thaw cycles are sensitive to the changes in amplitude and freeze-thaw period of the sinusoidal varying air temperature near the ground surface, hydraulic conductivity of soil texture, and the initial groundwater levels. Our modeling framework and simulation results highlight the need to account for coupled thermal-hydraulic-mechanical-chemical behaviors to better understand soil water and groundwater dynamics during freeze-thaw cycles and further help explain the observed changes in water cycles and landscape evolution in cold regions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Evaporation Rates of Brine on Mars

While Mars is now largely a dry and barren place, recent data have indicated that water has flowed at specific locations within the last approx. 10(exp 6) y. This had led to a resurgence of interest in theoretical and experimental work aimed at understanding the behavior of water on Mars. There are several means whereby the stability of liquid water on Mars could be increased, one being the presence solutes that would depress the freezing point. Salt water on Earth is about 0.5M NaCl, but laboratory experiments suggest that martian salt water is quite different. We recently began a program of laboratory measurements of the stability of liquid water, ice and ice-dust mixtures under martian conditions and here report measurements of the evaporation rate of 0.25M brine.

Sears, D. W. G.↗
DOE OSTI2012

HIGH-PRECISION MACLAURIN-BASED MODELS OF ROTATING LIQUID PLANETS

We present an efficient numerical self-consistent field method for calculating a gravitational model of a rotating liquid planet to spherical harmonic degree {approx}30 and a precision {approx}10{sup -12} in the external gravity field. The method's accuracy is validated by comparing results, for Jupiter rotation parameters, with the exact Maclaurin constant-density solution. The method can be generalized to non-constant density.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Dipolar correlations in liquid water

We present an analysis of the dipolar correlations in water as a function of temperature and density and in the presence of simple ionic solutes, carried out using molecular dynamics simulations and empirical potentials. We show that the dipole-dipole correlation function of the liquid exhibits sizable oscillations over nanodomains of about 1.5 nm radius, with several isosbestic points as a function of temperature; the size of the nanodomains is nearly independent on temperature and density, between 240 and 400 K and 0.9 and 1.3 g/cm{sup 3}, but it is substantially affected by the presence of solvated ions. In the same range of thermodynamic conditions, the decay time (τ) of the system dipole moment varies by a factor of about 30 and 1.5, as a function of temperature and density, respectively. At 300 K, we observed a maximum in τ as a function of density, and a corresponding shallow maximum in the tetrahedral order parameter, in a range where the diffusion coefficient, the pressure and the dielectric constant increase monotonically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Solvent Quality on Structure and Dynamics of Lignin in Solution

The conversion of lignin into useful chemicals and monomers requires that different linkages connecting monomers are exposed to the catalytic sites. As most conversion processes are expected to occur in the liquid phase, it is important to understand the structure and dynamics of lignin in solution. Here, we have examined the structure and dynamics of hardwood- and softwood-derived lignin model compounds with 61 monomers in methanol/water solution.

09 BIOMASS FUELS↗
DOE OSTI2018

What is the effect of lipophilic polymeric ionic liquids on friction and wear?

In this work, methacrylate-type ionic liquid (IL) monomers containing a quaternary ammonium cation and two different counter-anions were synthesized and used as co-monomers to obtain functional poly(alkyl methacrylates) (PAMAs) as friction and wear reducing additives for lubricants. The effect of molecular weight, polymer topology (random or diblock), and IL counter anion on friction and wear behavior of polymer PAO (poly-alpha olefin) solutions have been investigated. The results were compared to those of PAO solutions additized with a small molecule, non-polymeric ionic liquid, or non-ionic copolymers containing 2-(dimethylamino)ethyl methacrylate (DMAEMA) as the polar comonomer. No clear correlation between polymer molecular weight and friction or wear behavior was observed. Random ionic liquid copolymers led to lower wear volumes than their block counterparts. Polymers containing dicyanamide (DCA) counter anion showed lower wear volume compared to those containing bis((trifluoromethyl)sulfonyl)imide (TFSI) anion. Surprisingly, none of the IL copolymers studied outperformed the DMAEMA containing block copolymer in terms of wear volume reduction, suggesting the IL moiety had no beneficial effect on wear.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Supercritical Treatment Technology for Water Purification (Annual Final Report)

This project continued the development of the Supercritical Water Extraction – Enhanced Targeted Recovery (SWEETR™) technology, a novel desalination process for treating hypersaline brines. The overall objective is to demonstrate the technical and economic feasibility of an innovative, energy efficient, and robust supercritical desalination technology to treat hypersaline solutions and separating saltwater into a pure water stream and valuable recovered solids, resulting in zero liquid discharge (ZLD). The proposed technology, focuses on innovative methods of applying supercritical water to treat highly concentrated brine solutions without incurring a high energy penalty. Integrating the technology with solar energy reduces the energy cost for the system. The results obtained during the proof-of-concept testing demonstrate that the SWEETR™ concept is technically feasible and that supercritical water treatment is a viable option with strong merit for treating high salinity waters. The strategic design of the system provides the opportunity to localize the supercritical zone, which helps reduce the overall energy cost associated with the desalination process. The process can be tuned to remove only the amount of salts required to make the treated water “fit for purpose”, providing further opportunities to minimize energy costs. The ability to destroy organic compounds associated with the water while simultaneously being able to desalinate makes SWEETR™ uniquely fitted for treating aqueous streams such as produced water from oil and gas extraction which contain small amounts of organics. Such mixed contaminant streams pose an extreme challenge for other treatment options. Future work will further develop the SWEETR™ technology to take it from the bench-scale to the pilot-scale, and ready the technology for commercial application.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2014

Nanoparticle preparation of Mefenamic acid by electrospray drying

Nanoparticles preparation of Mefenamic acid (MA) by using an electrospray drying method was conducted in this study. Electrospray drying is a process that uses electrostatic force to disperse a conductive liquid stream into fine charged droplets through the coulomb fission of charges in the liquid and finally dry into fine particles. Electrospray drying modes operation usually in Taylor cone jet, and it was formed by controlling applied voltage and liquid flow rate. A conductive liquid (2.77–8.55μScm{sup −1}) which is MA solution was prepared by using acetone with concentration 0.041 and 0.055 M before pumping at a flow rate of 3–6ml/h. By applying the applied voltage at 1.3–1.5 kV, Taylor cone jet mode was formed prior to the electrospray. During electrospray drying process, solvent evaporation from the droplet was occurring that leads to coulomb disruption and may generate to nanoparticles. The dried nanoparticles were collected on a grounded substrate that was placed at varying distance from the electrospray. MA particle with size range of 100–400 nm were produced by electrospray drying process. Characterization of particles by using X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) show that particles formed into polymorph I.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Critical point analysis of phase envelope diagram

Phase diagram or phase envelope is a relation between temperature and pressure that shows the condition of equilibria between the different phases of chemical compounds, mixture of compounds, and solutions. Phase diagram is an important issue in chemical thermodynamics and hydrocarbon reservoir. It is very useful for process simulation, hydrocarbon reactor design, and petroleum engineering studies. It is constructed from the bubble line, dew line, and critical point. Bubble line and dew line are composed of bubble points and dew points, respectively. Bubble point is the first point at which the gas is formed when a liquid is heated. Meanwhile, dew point is the first point where the liquid is formed when the gas is cooled. Critical point is the point where all of the properties of gases and liquids are equal, such as temperature, pressure, amount of substance, and others. Critical point is very useful in fuel processing and dissolution of certain chemicals. Here in this paper, we will show the critical point analytically. Then, it will be compared with numerical calculations of Peng-Robinson equation by using Newton-Raphson method. As case studies, several hydrocarbon mixtures are simulated using by Matlab.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Lessons Learned with Metallized Gelled Propellants

During testing of metallized gelled propellants in a rocket engine, many changes had to be made to the normal test program for traditional liquid propellants. The lessons learned during the testing and the solutions for many of the new operational conditions posed with gelled fuels will help future programs run more smoothly. The major factors that influenced the success of the testing were propellant settling, piston-cylinder tank operation, control of self pressurization, capture of metal oxide particles, and a gelled-fuel protective layer. In these ongoing rocket combustion experiments at the NASA Lewis Research Center, metallized, gelled liquid propellants are used in a small modular engine that produces 30 to 40 lb of thrust. Traditional liquid RP-1 and gelled RP-1 with 0-, 5-, and 55-wt% loadings of aluminum are used with gaseous oxygen as the oxidizer. The figure compares the thrust chamber efficiencies of different engines.

Source record↗
DOE OSTI2019

Peculiarities of Phase Transformations of Polymer Solutions in Deformable Porous Matrices

Methods of equilibrium chemical thermodynamics have been used to simulate laws of the influence of geometric factors (pore shape and volume) on the phase equilibria is stratifying polymer solutions in porous matrices. Using the example of the phase separation in a liquid polybutadiene–polystyrene system, it is established that deformation of the porous matrix determining the geometric characteristics of pores can be used to control the mutual solubilities of components and the volumes and thermodynamic stability of coexisting equilibrium phases. Significant deformations of the matrix lead to suppression of the phase separation in pores and make any solution compositions possible (up to equimolar mixtures).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Nitric-acid hydrolysis of Miscanthus giganteus to sugars fermented to bioethanol

Miscanthus giganteus ( M. giganteus ) is a promising feedstock for the production of bioethanol or biochemicals. Using only dilute nitric acid, this work describes a two-step process for hydrolyzing hemicellulose and cellulose to fermentable sugars. Primary variables were temperature and reaction time. The solid-to-liquid mass ratio was 1:8. No enzymes were used. In the first step, M. giganteus was contacted with 0.5 wt.% nitric acid at temperatures between 120 and 160°C for 5 to 40 min. The second step used 0.5 or 0.75 wt.% nitric acid at temperatures between 180 and 210°C for less than 6 min. Under selected conditions, almost all hemicellulose and 58% cellulose were transferred to the liquid phase. Small amounts of degradation products were observed. The xylose solution obtained from the nitric-acid hydrolysis was fermented for 96 h and the glucose solution for 48 h to yield 0.41 g ethanol/g xylose and 0.46 g ethanol/g glucose. To characterize residual solids and the liquor from both steps, nuclear-magneticresonance (NMR) spectroscopy was performed for each fraction. In conclusion, the analytical data indicate that the liquid phase from Steps 1 and 2 contain little lignin or lignin derivatives.

09 BIOMASS FUELS↗