Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Task 1—Steam Oxidation (NETL-US)

The proposed steam in let temperature in the Advanced Ultra Supercritical (A·USC) steam turbine is high enough (760°C) Ihat traditional turbine casing and valve body materials such as ferr;tic/manensitic steels will not suffice due to temperature lim itations of this class of materials. Cast versions of three traditionally wrought Ni-based superalloys (Haynes 263. Haynes 282, and Nimonic 105) were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantia l: 2-5,000 kg each half and on the order of 100 nun thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equi valem microslruclUre •. A multi_step homogenization heat treatment was d~ve loped to better disperse the al loy constituents. These castings were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (al 760 and 800 "C).

36 MATERIALS SCIENCE↗

Catalyst by Design

The development of new catalytic materials is still dominated by trial and error methods. Although it has been successful, the empirical development of catalytic materials is time consuming and expensive with no guarantee of success. In our laboratories, we are developing a comprehensive catalysts by design that involves state-of-the-art first principle density functional theory calculations, experimental design of catalyst sites, and sub- ngstr m resolution imaging with an aberration-corrected electron microscope to characterize the microstructure. In this chapter, we focus on supported platinum cluster catalyst systems which are one of the most important industrial catalysts and attempt to demonstrate the feasibility of the catalyst by design concept.

catalysis↗

Thermodynamic and kinetic analyses of the CO2 chemisorption mechanism on Na2TiO3: Experimental and theoretical evidences

ABSTRACT: Sodium metatitanate (Na2TiO3) was successfully synthesized via a solid-state reaction. The Na2TiO3 structure and microstructure were characterized using X-ray diffraction, scanning and transmission electron microscopy, and N2 adsorption. Then, the CO2 chemisorption mechanism on Na2TiO3 was systematically analyzed to determine the influence of temperature. The CO2 chemisorption capacity of Na2TiO3 was evaluated both dynamically and isothermally, and the products were reanalyzed to elucidate the Na2TiO3-CO2 reaction mechanism. Different chemical species (Na2CO3, Na2O, and Na4Ti5O12 or Na16Ti10O28) were identified during the CO2 capture process in Na2TiO3. In addition, some CO2 chemisorption kinetic parameters were determined. The ΔH‡ was found to be 140.9 kJ/mol, to the Na2TiO3-CO2 system, between 600 and 780 °C. Results evidenced that CO2 chemisorption on Na2TiO3 highly depends on the reaction temperature. Furthermore, the experiments were theoretically supported by different thermodynamic calculations. The calculated thermodynamic properties of CO2 capture reactions by (Na2TiO3, Na4Ti5O12, and Na16Ti10O28) sodium titanates were fully investigated.

Duan, Yuhua↗

Design and Preparation of SiC-ZrC Composite Coating Layers by FB-CVD Used in TRISO Coated Fuel Particles - 18417

Tri-structural-isotropic (TRISO) particle has been successful in high temperature gas cooled reactor (HTGR), but an improved design is required for future development. In this paper, two alternative designs of TRISO particle are proposed by introducing ZrC to the coating layers. One design is to add an individual ZrC layer between the inner PyC layer and the SiC layer. Another design is to construct a periodic coating layer with the repeated sequence of SiC/SiC-ZrC by doping pulsed ZrCl{sub 4} at proper time intervals during the SiC preparation process. The designed coating layers were successfully prepared on the ZrO{sub 2}/buffer/IPyC particles by the fluidized bed chemical vapor deposition (FB-CVD) method. Microstructures and characterizations of the composite coating layers were given based on XRD, SEM, EDX and Raman scattering analysis. By controlling the pulse parameter, the grain size of SiC is significantly decreased which means doping ZrCl{sub 4} can interrupt normal growth of SiC crystals. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Characterization of build parameters and microstructure in low heat input WAAM of Ni-based superalloy Haynes 282

Conference paper for 2024 10th International Conference on Advances in Materials, Manufacturing & Repair for Power Plants. Ni-based superalloy Haynes 282 is a prime candidate for advanced power generation systems due to its superior fabricability, weldability, and high-temperature performance. Additive manufacturing offers potential cost and time savings for gas turbine components. Wire-arc direct energy deposition can create large components but often requires post-processing treatments, such as hot isostatic pressing (HIP), to address porosity. This study explores a low heat-input, high deposition rate GMAW process to achieve fully dense Haynes 282 without HIP. Twenty-one blocks were deposited, varying travel and wire feed speeds. Initial analysis (visual inspection, microstructural examination, and CT) revealed the impact of build parameters on internal porosity and defects. Scanning electron microscopy provided insights into structural heterogeneity and microstructural properties. Related journal article can be found at https://doi.org/10.31399/asm.cp.am-epri-2024p0001.

Adam, Benjamin↗

CHARACTERIZATION OF DIRECT ADDITIVE MANUFACTURED U3Si2 SURROGATE TO PREDICT U3Si2 MICROSTRUCTURES

The purpose of this research is to perform characterization exclusively on U3Si2 surrogate materials to predict the process envelope for future work with uranium compounds, considering potential microstructural properties. The surrogate material will be synthesized using a laser energy source. This characterization work will provide new property data to aid the concept development stages of fabricating U3Si2 by means of a novel INL-designed direct additive manufacturing methodology. This process not only seeks to potentially reduce production costs, but also to shorten the current silicide fuel fabrication process. U3Si2 has been downselected as a candidate for accident-tolerant fuel for commercial light-water reactors due to its improved thermal conductivity, higher atomic density, and fuel cycle economics when compared with UO2. The research efforts on this work are performed at Idaho National Laboratory (INL) in partnership with Westinghouse Electric. The initial stage of the surrogate research will include a thermodynamic study along with physical and mechanical property analyses to assist in the downselection of surrogate materials for initial experimentation. Initial characterization analyzed the microstructural effects to determine effectiveness of laser interaction on the surrogate materials. Additional characterization via scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x-ray diffraction (XRD) may predict the end product morphology when working with uranium compounds. Complementary comparative studies were performed on the surrogate end products analyzing similarities in microstructural features present on the U3Si2 fuel fabricated by means of alternate methods. This stage provided novel microstructural data on surrogate silicide fuel fabrication by means of an additive manufacturing process (laser synthesis), and was crucial to confirm the formation of surrogate silicide fuels (Hf3Si2 and Zr3Si2) employing a laser synthesis.

42 ENGINEERING↗

Microstructure and functionality of a uniquely graded super duplex stainless steel designed by a novel arc heat treatment method

Highlights: • A uniquely graded duplex stainless steel microstructure was fully characterized. • Nitrogen depletion occurred by solid state diffusion next to the fusion boundary. • Phase fractions and stability were compared to thermodynamic calculations. • Orientation relationships and morphology of sigma, chi, nitrides and R were studied. • A diagram summarizing functionality of aged duplex microstructures is introduced. - Abstract: A novel arc heat treatment technique was applied to design a uniquely graded super duplex stainless steel (SDSS), by subjecting a single sample to a steady state temperature gradient for 10 h. A new experimental approach was used to map precipitation in microstructure, covering aging temperatures of up to 1430 °C. The microstructure was characterized and functionality was evaluated via hardness mapping. Nitrogen depletion adjacent to the fusion boundary depressed the upper temperature limit for austenite formation and influenced the phase balance above 980 °C. Austenite/ferrite boundaries deviating from Kurdjumov–Sachs orientation relationship (OR) were preferred locations for precipitation of σ at 630–1000 °C, χ at 560–1000 °C, Cr{sub 2}N at 600–900 °C and R between 550 °C and 700 °C. Precipitate morphology changed with decreasing temperature; from blocky to coral-shaped for σ, from discrete blocky to elongated particles for χ, and from polygonal to disc-shaped for R. Thermodynamic calculations of phase equilibria largely agreed with observations above 750 °C when considering nitrogen loss. Formation of intermetallic phases and 475 °C-embrittlement resulted in increased hardness. A schematic diagram, correlating information about phase contents, morphologies and hardness, as a function of exposure temperature, is introduced for evaluation of functionality of microstructures.

36 MATERIALS SCIENCE↗

Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite

In contrast to conventional preforming techniques, additive manufacturing features direct and layer-by-layer fabrication, which provides viable new capabilities for the fabrication of reinforced composites. In this paper, we explore the microstructural design as well as additive manufacturing and characterization of 3D orthogonal, short carbon fiber/acrylonitrile-butadiene-styrene (ABS) preforms and composite. First, an array of 3D orthogonal preforms is designed based on topological consideration and validated by fused filament fabrication of pure ABS wire; high fidelity between models and preforms is accomplished. Then, short carbon fibers are introduced into the designed 3D orthogonal preforms as reinforcement, using a short carbon fiber/ABS wire. Lastly, the compressive behavior of a 3D orthogonal, short carbon fiber/ABS preform and that of its silicone infused composite are characterized. Finally, the preform design methodology developed in this research as well as the preliminary effort made in composite fabrication and characterization demonstrates the feasibility of additive manufacturing of 3D orthogonal preform based fiber composites.

36 MATERIALS SCIENCE↗

Report on partially complete post-irradiation-examination of the INL samples

Ferritic-martensitic steels (NF616 and T91), and austenitic stainless steel 800H and its Grain Boundary Engineering (GBE)-treated version 800H-TMP (ThermoMechanical Processing) were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) and their microstructures and mechanical properties were characterized. Ferritic-martensitic steels were irradiated up to 8.16 dpa in the irradiation temperatures ranging from 241 °C to 447.5 °C. Selected 800H and 800H-TMP samples were also irradiated up to 9.12 dpa at 359°C to 431°C. Vickers hardness measurement, fractography, and microstructural characterization were performed on the selected samples in the LAMDA lab. Radiation-induced hardening of NF616 and T91 was observed in the hardness measurements which show ~37% to ~65% increases, depending on irradiation dose and irradiation temperature. Within the irradiation conditions studied in this work, samples with a higher dose had a higher hardness. All the tested alloy 800H and 800H-TMP in this work showed irradiation-hardening by ~96±7% to ~152±10%. Alloy 800HTMP tended to have slightly smaller irradiation-hardening than alloy 800H. The fractography of NF616 samples D2 (2.96 dpa at 291.5°C), D4 (5.91 dpa at 359°C), and D6 (8.16 dpa at 431°C) indicated loss of ductility with negligible necking for the sample D2, yet obvious ductile failure for samples D4 and D6. Fractography of alloy 800H samples N4 (7.27 dpa at 359°C), N5 (3.9 dpa at 451.5°C), and N6 (9.01 dpa at 431°C), and alloy 800H-TMP samples P4 (7.36 dpa at 359°C), P5 (3.95 dpa at 451.5°C), and P6 (9.12 dpa at 431°C) indicated that all samples failed in a ductile mode, with obvious necking. Dimples were observed where large Ti-containing particles were observed for the samples. TEM characterization was performed on alloy 800H (N4, N5, N6) and 800H-TMP (P4, P5 and P6). Accumulation of M23C6 precipitates at grain boundaries was observed in all samples, and the presence of Ti(C,N) precipitates at grain boundaries and in the matrix was observed in alloy 800H-TMP. M23C6 precipitates were found to have the cube-on-cube orientation relationship with the matrix. In addition, nanoscale Si-rich clusters were observed in the matrix of all samples. Atom probe tomography was conducted on the same samples, and their results are being analyzed to be integrated with the TEM results for a confident description of the clustering behavior. Due to the low irradiation temperature (up to 451.5°C), dislocation loops formed in all samples, with the density and the average size of dislocation loops in the order of 1022 – 1023 m-3 and 11.7 – 15.9 nm, respectively. The loop densities in alloy 800H were higher than that in alloy 800H-TMP under the same irradiation conditions. Further systematic data analyses, together with some complementary experiments, will be pursued for these samples to foster peer-reviewed journal article publications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High-Pressure Minerals in Meteorites: Constraints on Shock Conditions and Duration

The objective of this research was to better understand the conditions and duration of shock metamorphism in meteorites through microstructural and microanalytical characterization of high-pressure minerals. A) Continue to investigate the mineralogy and microstructures of melt-veins in a suite of chondritic samples ranging from shock grades S3 through S6 to determine how the mineral assemblages that crystallize at high-pressure and are related to shock grade. B) Investigate the chemical, mineralogical, and microstructural heterogeneities that occur across melt veins to interpret crystallization histories. C) Use static high-pressure experiments to simulate crystallization of melt veins for mineralogical and textural comparisons with the melt veins of naturally shocked samples. D) Characterize the compositions and defect microstructures of polycrystalline ringwoodite, wadsleyite, majorite, (Mg,Fe)Si03-ilmenite and (Mg,Fe)SiO3-perovskite in S6 samples to understand the mechanisms of phase transformations that occur during shock. These results will combined with kinetic data to constrain the time scales of kinetic processes. E) Investigate the transformations of metastable high-pressure minerals back to low- pressure forms to constrain post-shock temperatures and estimates of the peak shock pressure. Of these objectives, we have obtained publishable data on A, B and D. I am currently doing difficult high-pressure melting and quench experiments on an L chondrite known as Mbale. These experiments will provide additional constraints on the mineral assemblages that are produced during rapid quench of an L chondrite at pressures of 16 to 25 GPa. Results from published or nearly published research is presented below. Lists of theses, dissertations and publications are given below.

Sharp, Thomas G.↗

Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process

Highlights: • Wire + arc additive manufacture (WAAM) was applied to produce maraging steel structures. • Microstructure evolution of WAAM alloy was characterized and correlated with the layer-by-layer building manner. • Mechanical properties of WAAM alloy were tested and correlated with the aging response of WAAM microstructure. • Retained austenite content was measured and correlated with the tensile strength loss. - Abstract: Wire + arc additive manufacture is developed for producing large-scale metallic components. In this paper, maraging steel parts were produced, and the microstructure and mechanical properties were investigated. The microhardness and tensile strength of the as deposited alloy reduced from the bottom to the top due to the transient thermal cycling, which resulted in partial aging and non-uniform formation of intermetallic compounds along the building direction. Solutionizing, followed by 3 h aging, significantly reduced the microstructural heterogeneity and increased the mechanical properties by 24.7% through the formation of large amounts of finely distributed precipitates. The as deposited alloy possessed superior strength to the wrought alloy in solutionized condition but inferior to the later in aged condition, which was attributed to the less pronounced aging response of the low-angle columnar grains characterized microstructure and the presence of retained and reverted austenite.

36 MATERIALS SCIENCE↗

Incubational domain characterization in lightly doped ceria

Microstructures of both Gd- and Y-doped ceria with different doping level (i.e., 10 at% and 25 at%) have been comprehensively characterized by means of high resolution transmission electron microscopy and selected area electron diffraction. Coherent nano-sized domains can be widely observed in heavily doped ceria. Nevertheless, it was found that a large amount of dislocations actually exist in lightly doped ceria instead of heavily doped ones. Furthermore, incubational domains can be detected in lightly doped ceria, with dislocations located at the interfaces. The interactions between such linear dislocations and dopant defects have been simulated accordingly. As a consequence, the formation mechanism of incubational domains is rationalized in terms of the interaction between intrinsic dislocations of doped ceria and dopant defects. This study offers the insights into the initial state and related mechanism of the formation of nano-sized domains, which have been widely observed in heavily rare-earth-doped ceria in recent years. - Graphical abstract: Interactions between dislocations and dopants lead to incubational domain formation in lightly doped ceria. Highlights: Black-Right-Pointing-Pointer Microstructures were characterized in both heavily and light Gd-/Y-doped ceria. Black-Right-Pointing-Pointer Dislocations are existed in lightly doped ceria rather than heavily doped one. Black-Right-Pointing-Pointer Interactions between dislocations and dopant defects were simulated. Black-Right-Pointing-Pointer Formation of dislocation associated incubational domain is rationalized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TEM Characterization of High Burn-up Microstructure of U-7Mo Alloy

As an essential part of global nuclear non-proliferation effort, the RERTR program is developing low enriched U-Mo fuels (< 20% U-235) for use in research and test reactors that currently employ highly enriched uranium fuels. One type of fuel being developed is a dispersion fuel plate comprised of U-7Mo particles dispersed in Al alloy matrix. Recent TEM characterizations of the ATR irradiated U-7Mo dispersion fuel plates include the samples with a local fission densities of 4.5, 5.2, 5.6 and 6.3 E+21 fissions/cm3 and irradiation temperatures of 101-136?C. The development of the irradiated microstructure of the U-7Mo fuel particles consists of fission gas bubble superlattice, large gas bubbles, solid fission product precipitates and their association to the large gas bubbles, grain subdivision to tens or hundreds of nanometer size, collapse of bubble superlattice, and amorphisation. This presentation will describe the observed microstructures specifically focusing on the U-7Mo fuel particles. The impact of the observed microstructure on the fuel performance and the comparison of the relevant features with that of the high burn-up UO2 fuels will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulated annealing reconstruction and characterization of the three-dimensional microstructure of a LiCoO{sub 2} Lithium-ion battery cathode

We adapt the simulated annealing approach for reconstruction of the 3D microstructure of a LiCoO{sub 2} cathode from a commercial Li-ion battery. The real size distribution curve of LiCoO{sub 2} particles is applied to regulate the reconstruction process. By discretizing a 40 × 40 × 40 μm cathode volume with 8,000,000 numerical cubes, the cathode involving three individual phases: 1) LiCoO{sub 2} as active material, 2) pores or electrolyte, and 3) additives (polyvinylidene fluoride + carbon black) is reconstructed. The microstructural statistical properties required in the reconstruction process are extracted from 2D focused ion beam/scanning electron microscopy images or obtained by analyzing the powder mixture used to make the cathode. Characterization of the reconstructed cathode gives important structural and transport properties including the two-point correlation functions, volume-specific surface area between phases, tortuosity and geometrical connectivity of individual phase. - Highlights: • Simulated annealing approach is adapted for 3D reconstruction of LiCoO{sub 2} cathode. • Real size distribution of LiCoO{sub 2} particles is applied in reconstruction process. • Reconstructed cathode accords with real one at important statistical properties. • Effective electrode-characterization approaches have been established. • Extensive characterization gives important structural properties, say, tortuosity.

36 MATERIALS SCIENCE↗

Characterization of Large Grain Nb Ingot Microstructure Using EBSP Mapping and Laue Camera Methods

Large grain/single crystal Nb is currently being examined for fabricating superconducting radiofrequency (SRF) cavities as an alternative to using rolled sheet. Three ingot slices from different suppliers have been characterized and are compared. It is desirable to know the grain orientations of an ingot slice before fabrication. Characterization of an ingot slice has been done using electron backscattered pattern (EBSP) orientation imaging microscopy (OIM), which requires cutting out pieces from the slice, a destructive technique. Use of a Laue camera allows nondestructive characterization of grain orientations. The OIM method was used to examine ingot slices from CBMM and Ningxia, while the Laue method was used to examine a Heraeus ingot slice. The three ingot slices are compared in terms of their crystal orientations and grain boundary misorientations, indicating no obvious commonalities. The Laue method has practical advantages over OIM for evaluating ingot slices during the manufacturing process.

36 MATERIALS SCIENCE↗

SEM Characterization of the High Burn-up Microstructure of U-7Mo Alloy

During irradiation, the microstructure of U-7Mo evolves until at a fission density near 5x1021 f/cm3 a high-burnup microstructure exists that is very different than what was observed at lower fission densities. This microstructure is dominated by randomly distributed, relatively large, homogeneous fission gas bubbles. The bubble superlattice has collapsed in many microstructural regions, and the fuel grain sizes, in many areas, become sub-micron in diameter with both amorphous fuel and crystalline fuel present. Solid fission product precipitates can be found inside the fission gas bubbles. To generate more information about the characteristics of the high-fission density microstructure, three samples irradiated in the RERTR-7 experiment have been characterized using a scanning electron microscope equipped with a focused ion beam. The FIB was used to generate samples for SEM imaging and to perform 3D reconstruction of the microstructure, which can be used to look for evidence of possible fission gas bubble interlinkage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗