Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Preliminary Thermoluminescent Dosimeter Glow Curve Analysis with Automated Glow Peak Identification for LiF Mg,Ti

When appropriately analyzed, thermoluminescent dosimeter glow curve analysis allows for improved quantification of thermoluminescent material behavior while flagging abnormalities. The mathematical separation of a glow curve into contributions from energetically unique trap states, or glow curve analysis, may be used to remove undesired effects of signal fading for complex materials. A generalized glow curve analysis software for the separation of glow curves is presented in this paper. Written in C ++ , the software uses the first-order kinetics model with automatic peak identification. The automatic identification of peaks is achieved through a unique peak-finding algorithm. Here, the program was performance tested using experimental glow curve data from LiF:Mg,Ti, and comparative results are presented.

47 OTHER INSTRUMENTATION↗

Maximally local two-nucleon interactions at N 3 LO in Δ -less chiral effective field theory

We present new maximally local two-nucleon interactions derived in Δ -less chiral effective field theory up to next-to-next-to-next-to-leading order ( N 3 LO ), which include all contact and pion-exchange contributions to the nuclear Hamiltonian up to this order. Our interactions are fit to nucleon-nucleon phase shifts using a Bayesian statistical approach, and explore a wide cutoff range from 0.6 – 0.9 fm ( ≈ 660 – 440 MeV ). These interactions can be straightforwardly employed in quantum Monte Carlo methods, such as the auxiliary field diffusion Monte Carlo method. Together with local three-nucleon forces, calculations with these new interactions will provide improved benchmarks for the structure of atomic nuclei and serve as crucial input to analyses of astrophysical phenomena of neutron stars, such as binary neutron-star mergers. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Testing parity-violating physics from cosmic rotation power reconstruction

We study the reconstruction of the cosmic rotation power spectrum produced by parity-violating physics, with an eye to ongoing and near future cosmic microwave background (CMB) experiments such as BICEP Array, CMBS4, LiteBIRD and Simons Observatory. In addition to the inflationary gravitational waves and gravitational lensing, measurements of other various effects on CMB polarization open new window into the early Universe. One of these is anisotropies of the cosmic polarization rotation which probes the Chern-Simons term generally predicted by string theory. The anisotropies of the cosmic rotation are also generated by the primordial magnetism and in the Standard Model extention framework. The cosmic rotation anisotropies can be reconstructed as quadratic in CMB anisotropies. However, the power of the reconstructed cosmic rotation is a CMB four-point correlation and is not directly related to the cosmic-rotation power spectrum. Understanding all contributions in the four-point correlation is required to extract the cosmic rotation signal. Here, assuming inflationary motivated cosmic-rotation models, we employ simulation to quantify each contribution to the four-point correlation and find that (1) a secondary contraction of the trispectrum increases the total signal-to-noise, (2) a bias from the lensing-induced trispectrum is significant compared to the statistical errors in, e.g., LiteBIRD and CMBS4-like experiments, (3) the use of a realization-dependent estimator decreases the statistical errors by 10%–20%, depending on experimental specifications, and (4) other higher-order contributions are negligible at least for near future experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Imaging and microanalysis of thin ionomer layers by scanning transmission electron microscopy

Improved conditions for imaging and spectroscopic mapping of thin perfluorosulfonic acid (PFSA) ionomer layers in fuel cell electrodes by scanning transmission electron microscopy (STEM) have been investigated. These conditions are first identified on model systems of Nafion ionomer-coated nanostructured thin films and nanoporous Si. The optimized conditions are then applied in a quantitative study of the ionomer through-layer loading for two typical electrode catalyst coatings using electron energy loss and energy dispersive X-ray spectroscopy in the transmission electron microscope. The e-beam induced damage to the perfluorosulfonic acid (PFSA) ionomer is quantified by following the fluorine mass loss with electron exposure and is then mitigated by a few orders of magnitude using cryogenic specimen cooling and a higher incident electron voltage. Multivariate statistical analysis is also applied to the analysis of spectrum images for data denoising and unbiased separation of independent components related to the catalyst, ionomer, and support.

Cullen, David A↗

Structural Studies of Amorphous Materials by Fluctuation Electron Microscopy

Fluctuation Electron Microscopy (FEM) is a technique that examines the fluctuations in electron scattering across a uniformly thin amorphous sample. The statistics of the intensity fluctuations, mean and variance, reveal any underlying medium-range order present in the structure. The goals of this project were: (1) To determine the fundamentals of the scattering physics that gives rise to the variance signal in fluctuation electron microscopy (FEM); (2) To use these discoveries to find ways to quantify FEM; (3) To apply the FEM method to interesting and technologically important families of amorphous materials, particularly those with important applications in energy-related processes. Excellent progress was made in items (1) and (2). In stage (3) we did not examine the metamict zircons, as proposed. Instead, we examined films of polycrystalline and amorphous semi-conducting diamond. Significant accomplishments are: (1) A Reverse Monte Carlo procedure was successfully implemented to invert FEM data into a structural model. This is computer-intensive, but it demonstrated that diffraction and FEM data from amorphous silicon are most consistent with a paracrystallite model. This means that there is more diamond-like topology present in amorphous silicon than is predicted by the continuous random network model. (2) There is significant displacement decoherence arising in diffraction from amorphous silicon and carbon. The samples are being bombarded by the electron beam and atoms do not stay still while being irradiated – much more than was formerly understood. The atom motions cause the destructive and constructive interferences in the diffraction pattern to fluctuate with time, and it is the time-averaged speckle that is being measured. The variance is reduced by a factor m, 4 ≤ m ≤ 1000, relative to that predicted by kinematical scattering theory. (3) Speckle intensity obeys a gamma distribution, where the mean intensity $ \overline{I}\ $ and m are the two parameters governing the shape of the gamma distribution profile. m is determined by the illumination spatial coherence, which is normally very high, and mostly by the displacement decoherence within the sample. (4) Amorphous materials are more affected by the electron beam than are crystalline materials. Different samples exhibit different disruptibility, as measured by the effective values of m that fit the data. (5) Understanding the origin of the displacement decoherence better should lead to efficient methods for computing the observed variance from amorphous materials.

36 MATERIALS SCIENCE↗

The REDTOP experiment: Rare $\eta/\eta^{\prime}$ Decays To Probe New Physics

The $\eta$ and $\eta^{\prime}$ mesons are nearly unique in the particle universe since they are almost Goldstone bosons and the dynamics of their decays are strongly constrained. The integrated $\eta$-meson samples collected in earlier experiments amount to $\sim10^{9}$ events. A new experiment, REDTOP (Rare Eta Decays To Probe New Physics), is being proposed, with the intent of collecting a data sample of order 10$^{14}$ $\eta$ (10$^{12}$ $\eta^{\prime}$) for studying very rare decays. Such statistics are sufficient for investigating several symmetry violations, and for searching for particles and fields beyond the Standard Model. In this work we present several studies evaluating REDTOP sensitivity to processes that couple the Standard Model to New Physics through all four of the so-called \emph{portals}: the Vector, the Scalar, the Axion and the Heavy Lepton portal. The sensitivity of the experiment is also adequate for probing several conservation laws, in particular $CP$, $T$ and Lepton Universality, and for the determination of the $\eta$ form factors, which is crucial for the interpretation of the recent measurement of muon $g-2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transport of Protostellar Cosmic Rays in Turbulent Dense Cores

We report recent studies have suggested that low-energy cosmic rays (CRs) may be accelerated inside molecular clouds by the shocks associated with star formation. We use a Monte Carlo transport code to model the propagation of CRs accelerated by protostellar accretion shocks through protostellar cores. We calculate the CR attenuation and energy losses and compute the resulting flux and ionization rate as a function of both radial distance from the protostar and angular position. We show that protostellar cores have nonuniform CR fluxes that produce a broad range of CR ionization rates, with the maximum value being up to two orders of magnitude higher than the radial average at a given distance. In particular, the CR flux is focused in the direction of the outflow cavity, creating a "flashlight" effect and allowing CRs to leak out of the core. The radially averaged ionization rates are less than the measured value for the Milky Way of ζ ≈ 10 -16 s -1 ; however, within r ≈ 0.03 pc from the protostar, the maximum ionization rates exceed this value. We show that variation in the protostellar parameters, particularly in the accretion rate, may produce ionization rates that are a couple of orders of magnitude higher or lower than our fiducial values. Finally, we use a statistical method to model unresolved subgrid magnetic turbulence in the core. We show that turbulence modifies the CR spectrum and increases the uniformity of the CR distribution but does not significantly affect the resulting ionization rates.

79 ASTRONOMY AND ASTROPHYSICS↗

Scaling relations in coronal mass ejections and energetic proton events associated with solar superflares

In order to discuss the potential impact of solar “superflares” on space weather, we investigated statistical relations among energetic proton peak flux with energy higher than 10 MeV (F {sub p}), CME speed near the Sun (V {sub CME}) obtained by Solar and Heliospheric Observatory/LASCO coronagraph, and flare soft X-ray peak flux in the 1–8 Å band (F {sub SXR}) during 110 major solar proton events recorded from 1996 to 2014. The linear regression fit results in the scaling relations V{sub CME}∝F{sub SXR}{sup α}, F{sub p}∝F{sub SXR}{sup β}, and F{sub p}∝V{sub CME}{sup γ} with α = 0.30 ± 0.04, β = 1.19 ± 0.08, and γ = 4.35 ± 0.50, respectively. On the basis of simple physical assumptions, on the other hand, we derive scaling relations expressing CME mass (M {sub CME}), CME speed, and energetic proton flux in terms of total flare energy (E {sub flare}) as M{sub CME}∝E{sub flare}{sup 2/3}, V{sub CME}∝E{sub flare}{sup 1/6}, and F{sub p}∝E{sub flare}{sup 5/6}∝V{sub CME}{sup 5}, respectively. We then combine the derived scaling relations with observation and estimated the upper limit of V {sub CME} and F {sub p} to be associated with possible solar superflares.

79 ASTRONOMY AND ASTROPHYSICS↗

Radar modeling of space diversity associated with slant path rain attenuation at variable path angles, frequencies, and drop size distributions

Single and joint terminal slant path attenuation statistics at frequencies of 28.56 and 19.04 GHz were derived from radar data. Statistics were independently obtained for path angles of 20, 45, and 90 deg, in order to examine how path angle influences both single terminal and joint probability distributions. A prediction technique is demonstrated to work well for calculating both single and joint terminal distributions at other path angles. Diversity gains and autocorrelation function dependence on site spacing were determined employing the radar modeling results.

Goldhirsh, J.↗

Use of Thematic Mapper for water quality assessment

The evaluation of simulated TM data obtained on an ER-2 aircraft at twenty-five predesignated sample sites for mapping water quality factors such as conductivity, pH, suspended solids, turbidity, temperature, and depth, is discussed. Using a multiple regression for the seven TM bands, an equation is developed for the suspended solids. TM bands 1, 2, 3, 4, and 6 are used with logarithm conductivity in a multiple regression. The assessment of regression equations for a high coefficient of determination (R-squared) and statistical significance is considered. Confidence intervals about the mean regression point are calculated in order to assess the robustness of the regressions used for mapping conductivity, turbidity, and suspended solids, and by regressing random subsamples of sites and comparing the resultant range of R-squared, cross validation is conducted.

Horn, E. M.↗

Is the 'superhot' hard X-ray component in solar flares consistent with a thermal source?

It has been shown by Brown and Emslie (1988) that any optically thin thermal bremsstrahlung source must emit an energy spectrum L(epsilon)(keV/s per keV) which has the property that higher derivatives alternate in sign. In this short note, this test is applied to the 'superhot' component discussed by Lin et al. (1981) in order to determine whether a strictly thermal interpretation of this component is valid. All statistically significant higher derivatives do indeed have the correct sign; this strengthens the identification of this component as due to a thermal source.

Emslie, A. Gordon↗

Dynamo-based scheme for forecasting the magnitude of solar activity cycles

This paper presents a general framework for forecasting the smoothed maximum level of solar activity in a given cycle, based on a simple understanding of the solar dynamo. This type of forecasting requires knowledge of the sun's polar magnetic field strength at the preceding activity minimum. Because direct measurements of this quantity are difficult to obtain, the quality of a number of proxy indicators already used by other authors is evaluated, which are physically related to the sun's polar field. These indicators are subjected to a rigorous statistical analysis, and the analysis technique for each indicator is specified in detail in order to simplify and systematize reanalysis for future use. It is found that several of these proxies are in fact poorly correlated or uncorrelated with solar activity, and thus are of little value for predicting activity maxima. Also presented is a scheme in which the predictions of the individual proxies are combined via an appropriately weighted mean to produce a compound prediction. The scheme is then applied to the current cycle 22, and a maximum smoothed international sunspot number of 171 + or - 26 is estimated.

Layden, A. C.↗

Analysis of images obtained by the Phobos 2 spacecraft

The reflection spectrum and density of the Martian satellite, Phobos, suggests that it may be a captured C-type asteroid and hence may contain relatively unaltered organic material from the early history of the solar system. Since there is evidence from isotopic anomalies that meteorites presumably derived from such asteroids contain preserved interstellar material, it is conceivable that evidence for interstellar matter might also be present on Phobos. The present research concerns interpretation of the chemical composition of Phobos' surface and analysis of images of Phobos taken by the FREGAT camera equipment aboard the Phobos 2 Spacecraft, including both disk-integrated and disk-resolved photometry. Because the surface of Phobos is a regolith, spectral information on the surface composition will be convolved with information on the surface texture. A primary goal was to untangle these effects. Unfortunately, the Phobos 1 Spacecraft lost contact with Earth during its transit to Mars, and Phobos 2 likewise lost contact after two months in orbit around Mars. Thus, the hovering phase of very close approach and the landing of instruments on the surface of Phobos did not take place, so no data on the elemental composition of the surface is available. However, 37 images were obtained of the satellite. The results include the first such observations at near infrared wavelengths, for which disk-integrated results show that the corresponding geometric albedo is quite small and very similar to the value in the blue. The resolved surface photometry was analyzed by developing new methods of radiative transfer in rough surface layers and a procedure referred to as statistical photoclinometry. The results provide root mean square surface slopes on scales from the order of 1 millimeter to 250 meters, albedo fluctuations, and corresponding correlation lengths.

Irvine, W. M.↗

Backscattering from a randomly rough dielectric surface

A backscattering model for scattering from a randomly rough dielectric surface is developed based on an approximate solution of a pair of integral equations for the tangential surface fields. Both like and cross-polarized scattering coefficients are obtained. It is found that the like polarized scattering coefficients contain two types of terms: single scattering terms and multiple scattering terms. The single scattering terms in like polarized scattering are shown to reduce the first-order solutions derived from the small perturbation method when the roughness parameters satisfy the slightly rough conditions. When surface roughnesses are large but the surface slope is small, only a single scattering term corresponding to the standard Kirchhoff model is significant. If the surface slope is large, the multiple scattering term will also be significant. The cross-polarized backscattering coefficients satisfy reciprocity and contain only multiple scattering terms. The difference between vertical and horizontal scattering coefficients is found to increase with the dielectric constant and is generally smaller than that predicted by the first-order small perturbation model. Good agreements are obtained between this model and measurements from statistically known surfaces.

Fung, Adrian K.↗

Inversion of surface parameters using fast learning neural networks

A neural network approach to the inversion of surface scattering parameters is presented. Simulated data sets based on a surface scattering model are used so that the data may be viewed as taken from a completely known randomly rough surface. The fast learning (FL) neural network and a multilayer perceptron (MLP) trained with backpropagation learning (BP network) are tested on the simulated backscattering data. The RMS error of training the FL network is found to be less than one half the error of the BP network while requiring one to two orders of magnitude less CPU time. When applied to inversion of parameters from a statistically rough surface, the FL method is successful at recovering the surface permittivity, the surface correlation length, and the RMS surface height in less time and with less error than the BP network. Further applications of the FL neural network to the inversion of parameters from backscatter measurements of an inhomogeneous layer above a half space are shown.

Dawson, M. S.↗

Quasi-Static Probabilistic Structural Analyses Process and Criteria

Current deterministic structural methods are easily applied to substructures and components, and analysts have built great design insights and confidence in them over the years. However, deterministic methods cannot support systems risk analyses, and it was recently reported that deterministic treatment of statistical data is inconsistent with error propagation laws that can result in unevenly conservative structural predictions. Assuming non-nal distributions and using statistical data formats throughout prevailing stress deterministic processes lead to a safety factor in statistical format, which integrated into the safety index, provides a safety factor and first order reliability relationship. The embedded safety factor in the safety index expression allows a historically based risk to be determined and verified over a variety of quasi-static metallic substructures consistent with the traditional safety factor methods and NASA Std. 5001 criteria.

Goldberg, B.↗

Digital Correlation Microwave Polarimetry: Analysis and Demonstration

The design, analysis, and demonstration of a digital-correlation microwave polarimeter for use in earth remote sensing is presented. We begin with an analysis of three-level digital correlation and develop the correlator transfer function and radiometric sensitivity. A fifth-order polynomial regression is derived for inverting the digital correlation coefficient into the analog statistic. In addition, the effects of quantizer threshold asymmetry and hysteresis are discussed. A two-look unpolarized calibration scheme is developed for identifying correlation offsets. The developed theory and calibration method are verified using a 10.7 GHz and a 37.0 GHz polarimeter. The polarimeters are based upon 1-GS/s three-level digital correlators and measure the first three Stokes parameters. Through experiment, the radiometric sensitivity is shown to approach the theoretical as derived earlier in the paper and the two-look unpolarized calibration method is successfully compared with results using a polarimetric scheme. Finally, sample data from an aircraft experiment demonstrates that the polarimeter is highly-useful for ocean wind-vector measurement.

Piepmeier, J. R.↗