Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Structure of cadmium selen-telluride alloy films grown by the thermal-screen method under highly nonequilibrium conditions

The results of technological experiments and structural investigations of films of CdSe{sub x}Te{sub 1-x} alloys synthesized by the thermal-screen method on heated and cooled substrates (under highly nonequilibrium conditions) are presented. It is shown that the synthesis of the entire range of compositions of alloy films with the structure from epitaxial to amorphous is possible from the mechanical mixture of CdSe and CdTe powders of the same composition under highly nonequilibrium conditions. The electron diffraction patterns and the microphotographs of film surfaces are reported.

36 MATERIALS SCIENCE↗

Electrical properties of In{sub 2}Se{sub 3} single crystals and photosensitivity of Al/In{sub 2}Se{sub 3} Schottky barriers

In{sub 2}Se{sub 3} single crystals {approx}40 mm long and 14 mm in diameter were grown by the Bridgman method. The composition of grown single crystals and their crystal structure were determined. The conductivity ({sigma}) and Hall constant (R) of grown single crystals were measured and the first Schottky barriers Al/n-In{sub 2}Se{sub 3} were fabricated. Rectification and photovoltaic effect were detected in the new structures. Based on the study of the photosensitivity spectra of Al/n-In{sub 2}Se{sub 3} structures, the nature of the interband transitions and band gap of In{sub 2}Se{sub 3} crystals were determined. It was concluded that the new structures can be applied to develop broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Formation of three-dimensional ZnSe-based semiconductor nanostructures

Nanostructures consisting of a 10-nm-thick sacrificial layer of ZnMgSSe and a 20-nm-thick stressed bilayer of ZnSSe/ZnSe were grown by molecular-beam epitaxy on GaAs substrates. Upon removal of the sacrificial layer by selective etching, multiwall ZnSSe/ZnSe microtubes were formed.

36 MATERIALS SCIENCE↗

Electrical properties of hybrid (ferromagnetic metal)-(layered semiconductor) Ni/p-GaSe structures

Two-barrier Ni/n-Ga2Se3/p-GaSe structures with nanoscale Ni-alloy grains caused by reactions at the 'metal-layered semiconductor' interface were formed after growing Ni layers on the p-GaSe (0001) surface. Current-voltage and capacitance-voltage characteristics of hybrid structures were studied in the temperature range of 220-350 K. The dependence of the impedance spectra on the bias voltage was studied at various temperatures. The frequency dependences of the impedance at high frequencies (f = 10{sup 6} Hz) are discussed in terms of the phenomena of spin injection and extraction in structures with an ultrathin spin-selective Ni/n-Ga{sub 2}Se{sub 3} barrier and the effects of spin diffusion and relaxation in the semiconductor substrate. The room-temperature phenomena of the Coulomb blockade and negative differential capacitance were detected. These phenomena are explained based on an analysis of transport processes in a narrow region near the 'ferromagnetic metal-semiconductor' interface, where nanoscale grains are arranged.

36 MATERIALS SCIENCE↗

Exciton binding energy in semiconductor quantum dots

In the adiabatic approximation in the context of the modified effective mass approach, in which the reduced exciton effective mass {mu} = {mu}(a) is a function of the radius a of the semiconductor quantum dot, an expression for the exciton binding energy E{sub ex}(a) in the quantum dot is derived. It is found that, in the CdSe and CdS quantum dots with the radii a comparable to the Bohr exciton radii a{sub ex}, the exciton binding energy E{sub ex}(a) is substantially (respectively, 7.4 and 4.5 times) higher than the exciton binding energy in the CdSe and CdS single crystals.

36 MATERIALS SCIENCE↗

Specific features of the luminescence and conductivity of zinc selenide on exposure to X-ray and optical excitation

The set of experimental data on the X-ray-excited luminescence and X-ray induced conductivity of ZnSe are compared to the data on the photoluminescence and photoconductivity. It is experimentally established that the current-voltage characteristics and the kinetics of phosphorescence and current relaxation depend on the type of excitation. It is found that the external electric field influences the intensity and shape of bands in the luminescence spectra. It is shown that the character of excitation defines the kinetics of recombination, charge carrier trapping, and conductivity in wide-gap semiconductors.

36 MATERIALS SCIENCE↗

Evolution of exciton states near the percolation threshold in two-phase systems with II-VI semiconductor quantum dots

From studies of two-phase systems (borosilicate matrices containing ZnSe or CdS quantum dots), it was found that the systems exhibit a specific feature associated with the percolation phase transition of charge carriers (excitons). The transition manifests itself as radical changes in the optical spectra of both ZnSe and CdS quantum dot systems and by fluctuations of the emission band intensities near the percolation threshold. These effects are due to microscopic fluctuations of the density of quantum dots. The average spacing between quantum dots is calculated taking into account their finite dimensions and the volume fraction occupied by the quantum dots at the percolation threshold. It is shown that clustering of quantum dots occurs via tunneling of charge carriers between the dots. A physical mechanism responsible for the percolation threshold for charge carriers is suggested. In the mechanism, the permittivity mismatch of the materials of the matrix and quantum dots plays an important role in delocalization of charge carriers (excitons): due to the mismatch, 'a dielectric trap' is formed at the external surface of the interface between the matrix and a quantum dot and, thus, surface exciton states are formed there. The critical concentrations of quantum dots are determined, such that the spatial overlapping of such surface states provides the percolation transition in both systems.

36 MATERIALS SCIENCE↗

Two-electron tin centers arising in glassy chalcogenides of arsenic due to nuclear reactions

Impurity {sup 119m}Sn atoms arising as a result of radioactive decay of parent {sup 119mm}Sn atoms in the structure of the glasses As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} are part of the glass composition in the form of structural units corresponding to tetravalent tin. The impurity {sup 119m}Sn atoms formed as a result of radioactive decay of {sup 119}Sb atoms in the structure of the As{sub 2}S{sub 3} and As{sub 2}Se{sub 3} glasses are localized at the arsenic sites and play the role of two-electron centers with a negative correlation energy. For the As{sub 2}Te{sub 3} glass, similarly formed {sup 119m}Sn atoms are electrically inactive. The greatest part of the daughter {sup 119m}Sn atoms arising after radioactive decay of parent {sup 119m}Te atoms are located at the chalcogen sites and are electrically inactive in the As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} glasses. A significant recoil energy of daughter atoms in the case of the {sup 119m}Te radioactive decay brings about the appearance of the {sup 119m}Sn displaced atoms.

36 MATERIALS SCIENCE↗

Features of the charge transfer in structures based on thin layers of bismuth-modified arsenic triselenide

The influence of the amount of introduced bismuth impurity on the charge transport and accumulation in amorphous As{sub 2}Se{sub 3} layers has been studied. A relation between the relaxation transport processes and the change in the internal structure of the material under study has been found. The physical parameters characterizing the electronic processes (contact capacitance, density of localized states responsible for the charge accumulation in the contact region, charge constant of the contact region, and charge-carrier mobility) have been determined in the arsenic triselenide layers. The mechanisms of the effects observed are discussed.

36 MATERIALS SCIENCE↗

Optical properties of thin GaSe/n-Si(111) films

Morphological and optical studies (ellipsometry and reflectance spectroscopy in the ranges 400-750 nm and 1.4-25 {mu}m) of thin GaSe films fabricated by thermal evaporation on the n-Si (111) single-crystal substrates are reported. The film thickness was 15-60 nm. It is established that, in the initial stage of growth, the growth of GaSe on the n-Si (111) substrates occurs via formation of islands (three-dimensional growth). It is shown that, as the thickness increases, the physical parameters of the film change and the films approach single crystals in crystalline and energy band structure. For films with a thickness of 60 nm, the reflectance band peak is attributed to indirect optical transitions enhanced by reflection from the film-substrate interface. From the results of optical studies, quantum effects in the surface region of the thin films are conjectured.

36 MATERIALS SCIENCE↗

Charge neutrality level and electronic properties of GaSe under pressure

Calculations of lattice parameters and electron band spectra of GaSe have been carried out from the first principles. The dependence of these parameters on hydrostatic compression as high as 5 GPa and on homogeneous biaxial tensile and compressive stresses (from -3 to 3 GPa) in the basal plane of the unit cell is considered. The calculations adequately reproduce the experimental features of the major interband transitions in GaSe under a hydrostatic pressure and, in the absence of experimental data, predict the dependence of structural and electronic properties of GaSe under the effect of a biaxial stress. On the basis of calculated band spectra, the energy position of the local charge neutrality level CNL, E{sub v} + 0.8 eV, has been determined and electronic properties of the as-grown material and energy diagrams for interphase boundaries in GaSe have been analyzed.

36 MATERIALS SCIENCE↗

On the nature of charge carrier scattering in Ag{sub 2}Se at low temperatures

The electric and thermoelectric properties of silver selenide in the temperature range of 4.2-300 K have been studied. The data obtained are interpreted within the theory of one-type carriers and Kane dispersion relation, with allowance for the character of electron-electron interaction. It is established that, for the concentrations n {<=} 7.8 x 10{sup 18} cm{sup -3}, charge carriers are scattered by impurity ions at T {<=} 30 K and by acoustic and optical phonons and point defects at T {>=} 30 K. Electron-electron interactions are found to be elastic at T < 30 K.

36 MATERIALS SCIENCE↗

Enhancement of the output emission efficiency of thin-film photoluminescence composite structures based on PbSe

The opportunity to increase the output emission efficiency of PbSe-based photoluminescence structures by depositing an antireflection layer is analyzed. A model of a three-layer thin film where the central layer is formed of a composite medium is proposed to calculate the reflectance spectra of the system. In von Bruggeman's approximation of the effective medium theory, the effective permittivity of the composite layer is calculated. The model proposed in the study is used to calculate the thickness of the arsenic chalcogenide (AsS{sub 4}) antireflection layer. The optimal AsS{sub 4} layer thickness determined experimentally is close to the results of calculation, and the corresponding gain in the output photoluminescence efficiency is as high as 60%.

36 MATERIALS SCIENCE↗

Optical phonons in CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys

The Raman spectra of CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys (x = 0.1, 0.2, Horizontal-Ellipsis 0.9) are studied. Both the singlemode and double-mode behavior of optical phonons are observed in CdGa{sub 2}S{sub 4x}Se{sub 4(1-x)} alloys. The observed optical mode at 138 cm{sup -1} is independent of the composition. It seems likely that this mode is the 'breathing mode' and is caused by atomic motion in the anion sublattice relative to vacancies. It is shown that the high-frequency modes of symmetry B{sub 1}(LO, TO) and B{sub 2}(LO, TO) are caused by the in-phase motion of atoms in the anion sublattice along the tetragonal axis c relative to trivalent Ga atoms. The doubly degenerate symmetry modes E{sub 1}(LO, TO) and E{sub 2}(LO, TO) are caused by the in-phase motion of atoms in the anion sublattice relative to trivalent Ga atoms of the cation sublattice in the xy plane (dipole 2Ga-4C), where C is S, Se. The optical symmetry modes B{sub 3}(LO, TO) and B{sub 4}(LO, TO) are associated with the motion of atoms in the anion sublattice relative to Cd atoms along the tetragonal axis c. The doubly degenerate modes E{sub 3}(LO, TO) and E{sub 4}(LO, TO) are associated with the motion of atoms in the anion sublattice relative to Cd atoms (dipole Cd-4C). The low-frequency modes B{sub 5}(LO, TO) and E{sub 5}(LO, TO) are the analogs of acoustic phonons at the edge of the Brillouin zone of sphalerite.

36 MATERIALS SCIENCE↗

Formation and reconstruction of Se nanoislands at the surface of thin epitaxial ZnSe layers grown on GaAs substrates

Strained epitaxial ZnSe layers are grown on GaAs substrates by the method of vapor-phase epitaxy from metal-organic compounds. It is found that Se nanoislands with a density of 10{sup 8} to 10{sup 9} cm{sup –2} are formed at the surface of such layers. It is established that an increase in the size of Se islands and a decrease in their density take place after completion of growth. Annealing in a H{sub 2} atmosphere at a temperature higher than 260°C leads to the disappearance of Se islands and to a decrease in the surface roughness. It is shown that annealing does not lead to deterioration of the structural perfection of the epitaxial ZnSe films; rather, annealing gives rise to a decrease in the intensity of impurity–defect luminescence and to an increase in the intensity of intrinsic radiation near the bottom of the exciton band.

36 MATERIALS SCIENCE↗

Effect of the chemical composition of Cu–In–Ga–Se layers on the photoconductivity and conversion efficiency of CdS/CIGSe solar cells

The effect of the [Ga]/[In+Ga] ratio of gallium and indium on the microwave photoconductivity of Cu–In–Ga–Se (CIGSe) films and on the efficiency of solar cells fabricated in accordance with the same technology is investigated. According to the observations of a field-emission scanning electron microscopy (FESEM), the grain size decreases with increasing Ga content. With increasing gallium content in the samples, the photogenerated-electron lifetime and the activation energy of the microwave photoconductivity also decrease. The changes in the activation energy of the through conduction in darkness are less than 20%. Analysis of the obtained data shows that the known effect of the gallium gradient on the efficiency should be associated with modification of the internal structure of grains instead of with their boundaries.

36 MATERIALS SCIENCE↗

Estimation of the band gap of a series of new thermoelectric materials

The band gap E{sub g} of a number of new thermoelectric materials, such as skutterudites, clathrates, Heusler phases, (Ge,Sn,Pb)(Te,Se)]{sub m}[(Bi,Sb){sub 2}(Te,Se){sub 3}]{sub n} (m, n = 0, 1, 2…) ternary alloys, and others is estimated. Estimations are performed using Goldsmid-Sharp’s formula E{sub g} = 2e|α{sub max}|T{sub max}, Vegard’s rule E{sub g} = (mE{sub g}{sup A} + nE{sub g}{sup B})/(m + n), and the empirical dependence T{sub max} = f(E{sub g}) (A and B denote the corresponding binary alloys, T{sub max} is the temperature corresponding to the thermoelectric-power maximum |α{sub max}| or the thermoelectric figure of merit (ZT){sub max}, and e is the elementary charge). It is shown that the empirical dependence E{sub g} = f(T{sub max}) gives the most accurate estimates of E{sub g} for difference classes of thermoelectric materials.

36 MATERIALS SCIENCE↗