Search NASA⌕ Search

SEARCH · Search NASA

Results for “superconducting quantum computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Mitigating the Sign Problem through Basis Rotations

Quantum Monte Carlo simulations of quantum many-body systems are plagued by the Fermion sign problem. The computational complexity of simulating Fermions scales exponentially in the projection time β and system size. The sign problem is basis dependent and an improved basis, for fixed errors, leads to exponentially quicker simulations. Herein, we show how to use sign-free quantum Monte Carlo simulations to optimize over the choice of basis on large two-dimensional systems. We numerically illustrate these techniques decreasing the “badness” of the sign problem by optimizing over single-particle basis rotations on one- and two-dimensional Hubbard systems. We find a generic rotation which improves the average sign of the Hubbard model for a wide range of U and densities for L×4 systems. In one example improvement, the average sign (and hence simulation cost at fixed accuracy) for the 16×4 Hubbard model at U/t=4 and n=0.75 increases by exp[8.64(6)β]. For typical projection times of β ≳ 100, this accelerates such simulation by many orders of magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct observation of dislocation structure evolution in SRF cavity niobium using electron channeling contrast imaging

Two major goals of superconducting radio frequency cavity research and development are achieving higher accelerating gradient and gaining the highest quality factor, a measure of efficiency. However, the consistent improvement of these performance metrics is restricted by many factors, one of which is microstructural defects, such as dislocation substructures within the material. In this work, dislocation evolution is compared in four samples extracted from a 2.8 mm thick large-grain niobium slice, with tensile axes chosen to generate specific dislocation structures during subsequent deformation. The four samples are (1) as-extracted, (2) extracted and annealed, (3) extracted and then deformed to 40% tensile strain, and (4) extracted, annealed at 800 °C 2 h, and then deformed to 40% strain. Electron channeling contrast imaging was performed on all samples to characterize initial dislocation density and dislocation structure evolution due to annealing and deformation, and related to the mechanical behavior observed in stress-strain curves. A fundamental understanding of dislocation evolution in niobium is necessary to develop computational models to simulate cavity forming, which could enable new processing methods for cavity fabrication to be identified that could lead to improved performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Increased localization of Majorana modes in antiferromagnetic chains on superconductors

Magnet-superconductor hybrid (MSH) systems are a key platform for custom-designed topological superconductors. Ideally, the ends of a one-dimensional MSH structure will host Majorana zero-modes (MZMs), the fundamental unit of topological quantum computing. However, some experiments with ferromagnetic (FM) chains show a more complicated picture. Due to tiny gap sizes and hence long coherence lengths, MZMs might hybridize and lose their topological protection. Recent experiments on a niobium surface have shown that both FM and antiferromagnetic (AFM) chains may be engineered, with the magnetic order depending on the crystallographic direction of the chain. While FM chains are well understood, AFM chains are less so. Here, we study two models inspired by the niobium surface: A minimal model to elucidate the general topological properties of AFM chains and an extended model to more closely simulate a real system by mimicking the proximity effect. Here, we find that, in general, for AFM chains, the topological gap is larger than for FM ones, and thus, coherence lengths are shorter for AFM chains, yielding more pronounced localization of MZMs in these chains. While for some parameters AFM chains may be topologically trivial, we find in these cases that adding an adjacent chain can result in a nontrivial system, with a single MZM at each chain end.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation matrix renormalization theory for correlated-electron materials with application to the crystalline phases of atomic hydrogen

Developing accurate and computationally efficient methods to calculate the electronic structure and total energy of correlated-electron materials has been a very challenging task in condensed matter physics and materials science. Recently, we have developed a correlation matrix renormalization (CMR) method which does not assume any empirical Coulomb interaction U parameters and does not have double counting problems in the ground-state total energy calculation. The CMR method has been demonstrated to be accurate in describing both the bonding and bond breaking behaviors of molecules. In this study, we extend the CMR method to the treatment of electron correlations in periodic solid systems. By using a linear hydrogen chain as a benchmark system, we show that the results from the CMR method compare very well with those obtained recently by accurate quantum Monte Carlo (QMC) calculations. We also study the equation of states of three-dimensional crystalline phases of atomic hydrogen. We show that the results from the CMR method agree much better with the available QMC data in comparison with those from density functional theory and Hartree-Fock calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherence-Induced Deep Thermalization Transition in Random Permutation Quantum Dynamics

We report a phase transition in the projected ensemble—the collection of postmeasurement wave functions of a local subsystem obtained by measuring its complement. The transition emerges in systems undergoing random permutation dynamics, a type of quantum time evolution wherein computational basis states are shuffled without creating superpositions. It separates a phase exhibiting deep thermalization, where the projected ensemble is distributed over Hilbert space in a maximally entropic fashion (Haar random), from a phase where it is minimally entropic (“classical bit-string ensemble”). Crucially, this deep thermalization transition is invisible to the subsystem’s density matrix, which always exhibits thermalization to infinite temperature across the phase diagram. Through a combination of analytical arguments and numerical simulations, we show that the transition is tuned by the total amount of injected by the input state and the measurement basis, and is exhibited robustly across different microscopic models. Our findings represent a novel form of ergodicity-breaking universality in quantum many-body dynamics, characterized not by a failure of regular thermalization, but rather by a failure of deep thermalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New Dimensions in the Theory of Excited States and X-ray Spectra (Final Report)

This Final Technical Report briefly summarizes the achievements during the lifetime of our DOE BES grant DE-FG02-97ER45623. The long-term goal of this project has been the development of quantitative theories of the interaction between radiation and matter, with a focus on x-ray spectroscopies. X-ray spectra have long been among the most important probes of atomic-scale structure and properties of matter, ranging from atoms and molecular systems to condensed matter and exotic states. These spectroscopies are widely used in investigations at the major DOE synchrotron x-ray facilities and related centers world-wide. In addition to fundamental theory, a major goal of our project has been the development of computational software that implements the theory for calculations of x-ray spectra of various materials throughout the periodic table. Due to the complex nature of x-ray spectra, quantitative theory is essential for its interpretation. The theory is challenging since it involves excited state electronic structure and many-body correlation effects that go beyond independent particle approximations like DFT or Hartree-Fock. Moreover, the experimental investigations typically involve a broad range of energy, time, and temperature scales, from the UV-Vis to hard x-ray energies of order 10 4 eV, and temperatures T from ambient up to the warm-dense-matter regime where the Fermi energy kBTF is of order a few eV, i.e., temperatures of order 105 Kelvin. This broad range of experimental conditions has fostered many novel theoretical approaches and computational techniques, many of which we have developed systematically over the duration of the grant. In contrast to the traditional wave-function approach of quantum theory and electronic structure methods, our theoretical approach is based on modern Green's function techniques. This approach is better suited for aperiodic structures, excited states, and broad spectral ranges, since it avoids the computational bottlenecks of sum-over-states approaches, as in the Fermi golden rule. This theoretical framework has been incorporated into efficient, user-friendly x-ray spectroscopy software which is now used routinely worldwide to simulate and analyze spectra. These theoretical tools provide an essential complement to synchrotron and next-generation light sources, which are used to investigate complex materials with ever increasing precision. Moreover, the synergism between theory, computation and experiment contributed by our research enhances scientific understanding and creates opportunities for innovations in materials and energy science and in many fields. As documented in this Report, this research grant has been remarkably successful in achieving these goals. In particular, this grant has supported the development of the x-ray spectroscopy software suite known as FEFF (named for an effective scattering amplitude f eff in the theory). The FEFF codes have become one of the premier tools for quantitative simulations of x-ray spectra as documented by many thousands of citations in the Web of Science and Google-Scholar.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal tensor renormalization group simulations of square-lattice quantum spin models

In this work, we benchmark the well-controlled and numerically accurate exponential thermal tensor renormalization group (XTRG) in the simulation of interacting spin models in two dimensions. Finite temperature introduces a finite thermal correlation length ξ, such that for system sizes L >> ξ finite-size calculations actually simulate the thermodynamic limit. Here in this paper, we focus on the square lattice Heisenberg antiferromagnet (SLH) and quantum Ising models (QIM) on open and cylindrical geometries up to width W = 10 . We explore various one-dimensional mapping paths in the matrix product operator (MPO) representation, whose performance is clearly shown to be geometry dependent. We benchmark against quantum Monte Carlo (QMC) data, yet also the series-expansion thermal tensor network results. Thermal properties including the internal energy, specific heat, and spin structure factors, etc. are computed with high precision, obtaining excellent agreement with QMC results. XTRG also allows us to reach remarkably low temperatures. For SLH, we obtain an energy per site u$^*_g$ ≃ -0.6694 (4) and a spontaneous magnetization m$^*_S$ ≃ 0.30 ( 1 ) already consistent with the ground-state properties, which is obtained from extrapolated low-T thermal data on W ≤ 8 cylinders and W ≤ 10 open strips, respectively. We extract an exponential divergence versus T of the structure factor S (M), as well as the correlation length ξ, at the ordering wave vector M = ($π,π$) , which represents the renormalized classical behavior and can be observed over a narrow but appreciable temperature window, by analyzing the finite-size data by XTRG simulations. For the QIM with a finite-temperature phase transition, we employ several thermal quantities, including the specific heat, Binder ratio, as well as the MPO entanglement to determine the critical temperature $T_c$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First principles study of the electronic structure of the Ni 2 MnIn / InAs and Ti 2 MnIn / InSb interfaces

We present a first principles study of the electronic and magnetic properties of epitaxial interfaces between the Heusler compounds, Ti 2 MnIn and Ni 2 MnIn, and the III-V semiconductors, InSb and InAs, respectively. We use density functional theory (DFT) with a machine-learned Hubbard U correction determined by Bayesian optimization. Here, we evaluate these interfaces for prospective applications in Majorana-based quantum computing and spintronics. In both interfaces, states from the Heusler penetrate into the gap of the semiconductor, decaying within a few atomic layers. The magnetic interactions at the interface are weak and local in space and energy. Magnetic moments of less than 0.1 µB are induced in the two atomic layers closest to the interface. The induced spin polarization around the Fermi level of the semiconductor decays within a few atomic layers. The decisive factor for the induced spin polarization around the Fermi level of the semiconductor is the spin polarization around the Fermi level in the Heusler, rather than the overall magnetic moment. As a result, the ferrimagnetic narrow-gap semiconductor Ti 2 MnIn induces a more significant spin polarization in the InSb than the ferromagnetic metal Ni 2 MnIn induces in the InAs. This is explained by the position of the transition metal d states in the Heusler with respect to the Fermi level. Based on our results, these interfaces are unlikely to be useful for Majorana devices but could be of interest for spintronics.

36 MATERIALS SCIENCE↗

Identifying materials-level sources of performance variation in superconducting transmon qubits

The Superconducting Quantum Materials and Systems Center, a U. S. Department of Energy National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various non-destructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T1 lifetime across different qubits on the same chip. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

Murthy, Akshay A. [Fermilab] (ORCID:00000001767768↗

Transition Metal Dichalcogenides: Making Atomic‐Level Magnetism Tunable with Light at Room Temperature

Abstract The capacity to manipulate magnetization in 2D dilute magnetic semiconductors (2D‐DMSs) using light, specifically in magnetically doped transition metal dichalcogenide (TMD) monolayers ( M ‐doped TX 2 , where M = V, Fe, and Cr; T = W, Mo; X = S, Se, and Te), may lead to innovative applications in spintronics, spin‐caloritronics, valleytronics, and quantum computation. This Perspective paper explores the mediation of magnetization by light under ambient conditions in 2D‐TMD DMSs and heterostructures. By combining magneto‐LC resonance (MLCR) experiments with density functional theory (DFT) calculations, we show that the magnetization can be enhanced using light in V‐doped TMD monolayers (e.g., V‐WS 2 , V‐WSe 2 ). This phenomenon is attributed to excess holes in the conduction and valence bands, and carriers trapped in magnetic doping states, mediating the magnetization of the semiconducting layer. In 2D‐TMD heterostructures (VSe 2 /WS 2 , VSe 2 /MoS 2 ), the significance of proximity, charge‐transfer, and confinement effects in amplifying light‐mediated magnetism is demonstrated. We attributed this to photon absorption at the TMD layer that generates electron–hole pairs mediating the magnetization of the heterostructure. These findings will encourage further research in the field of 2D magnetism and establish a novel design of 2D‐TMDs and heterostructures with optically tunable magnetic functionalities, paving the way for next‐generation magneto‐optic nanodevices.

36 MATERIALS SCIENCE↗

Atom-in-jellium equations of state in the high-energy-density regime

Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS). In this work, we report completely atom-in-jellium EOS calculations for Be, Al, Si, Fe, and Mo, as elements representative of a range of atomic number and low-pressure electronic structure. Comparing the more recent method of pseudoatom molecular dynamics, atom-in-jellium results were similar: sometimes less accurate, sometimes more. All these techniques exhibited pronounced effects of electronic shell structure in the shock Hugoniot which are not captured by Thomas-Fermi based EOS. These results demonstrate the value of a hierarchical approach to EOS construction, using average-atom techniques with shell structure to populate a wide-range EOS surface efficiently, complemented by more rigorous three-dimensional multiatom calculations to validate and adjust the EOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A hybrid magnetic/complementary metal oxide semiconductor three-context memory bit cell for non-volatile circuit design

After decades of continued scaling to the beat of Moore's law, it now appears that conventional silicon based devices are approaching their physical limits. In today's deep-submicron nodes, a number of short-channel and quantum effects are emerging that affect the manufacturing process, as well as, the functionality of the microelectronic systems-on-chip. Spintronics devices that exploit both the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, are promising solutions to circumvent these scaling threats. Being compatible with the CMOS technology, such devices offer a promising synergy of radiation immunity, infinite endurance, non-volatility, increased density, etc. In this paper, we present a hybrid (magnetic/CMOS) cell that is able to store and process data both electrically and magnetically. The cell is based on perpendicular spin-transfer torque magnetic tunnel junctions (STT-MTJs) and is suitable for use in magnetic random access memories and reprogrammable computing (non-volatile registers, processor cache memories, magnetic field-programmable gate arrays, etc). To demonstrate the potential our hybrid cell, we physically implemented a small hybrid memory block using 45 nm × 45 nm round MTJs for the magnetic part and 28 nm fully depleted silicon on insulator (FD-SOI) technology for the CMOS part. We also report the cells measured performances in terms of area, robustness, read/write speed and energy consumption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band Energy Dependence of Defect Formation in the Topological Semimetal Cd3As2

Cadmium Arsenide (Cd3As2) is a prototypical Dirac semimetal that manifests topological properties in a 3D bulk material. In defect-free Cd3As2, the Fermi level lies at a minimum in the density of states at the Dirac point, but experimentally it forms with excess electron carriers and an elevated EF, thereby masking the topological features. To computationally study the self-doping of Cd3As2, we combine density functional theory (DFT) calculations for defect formation energies with quasi-particle self-consistent GW (QSGW) electronic structure calculations. We demonstrate an innate dependence of the point defect formation energies on carrier concentrations and use the QSGW calculated density of states to extrapolate formation energies to arbitrary electron concentrations. This approach allows the quantitative modeling of thermodynamic defect equilibria in topological semimetals and is used to predict how Cd3As2 growth conditions affect the position of EF relative to the Dirac point.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗

First principles modeling of microscopic scintillation mechanisms using a Many-Body Green’s function approach (Final Report)

In 2010, we started the first lifecycle of a project on first principles modeling of microscopic unit processes that occur during scintillation in order to bring about a capability of formulating physics-based reaction-diffusion models that can predict scintillator light yield and explain their non-proportional response to the energy of incident ionizing radiation, with the hope that this will accelerate materials discovery that can mitigate this problem. During the ensuing years we focused on investigating from first principles the elementary quantum mechanical processes leading to polaron formation and exciton self-trapping in scintillators and identify the microscopic pathways leading to their transport. The effort to derive the master equation for carrier and exciton transport in realistic scintillators materials from first principles constitutes a challenge that requires an extensive background in various areas of computational physics. Previous theoretical investigations involved significant approximations and were limited in their scope. Most notably, the standard workhorse of the computational material scientist, density-functional theory, fails in describing the localized nature of self-trapped carriers as well as the electronic structure of rare-earth dopants. Advances in both algorithms and computational resources however, have rendered a comprehensive and accurate approach feasible. This has been amply demonstrated by the results produced by us during the first lifecycle of this project, which impressed upon the reviewers of the Independent Project Review: “The Review Team agreed, and commented that ’amazing and excellent progress had been made to date.’ The researchers tried and did improve the technology to advance the state of the art and show that it was adequate for the project.” In the following, we detail the progress achieved during each year of the project. We conclude by a final section where all our main achievements are summarized.

36 MATERIALS SCIENCE↗

QSpace - An open-source tensor library for Abelian and non-Abelian symmetries

This is the documentation for the tensor library QSpace (v4.0), a toolbox to exploit ‘quan tum symmetry spaces’ in tensor network states in the quantum many-body context. QSpace permits arbitrary combinations of symmetries including the abelian symmetries $\mathbb{Z}_n$ and U(1), as well as all non-abelian symmetries based on the semisimple classical Lie algebras: A n , B n , C n , and D n , or respectively, the special unitary group SU(n), the odd orthogonal group SO(2n+1), the symplectic group Sp(2n), and the even orthogonal group SO(2n). The code (C++ embedded via the MEX interface into Matlab) is available open source as of QSpace v4.0 on bitbucket under the Apache 2.0 license. QSpace is designed as a bottom-up approach for non-abelian symmetries. It starts from the defining representation and the respective Lie algebra. By explicitly comput ing and tabulating generalized Clebsch-Gordan coefficient tensors, QSpace is versatile in the type of operations that it can perform across all symmetries. At the level of an ap plication, much of the symmetry-related details are hidden within the QSpace C++ core libraries. Hence when developing tensor network algorithms with QSpace, these can be coded (nearly) as if there are no symmetries at all, despite being able to fully exploit general non-abelian symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding and Controlling Complex States Arising From Magnetic Frustration

Much of our national security relies on capabilities made possible by magnetism, in particular the ability to compute and store huge bodies of information as well as to move things and sense the world. Most of these technologies exploit ferromagnetism, i.e. the global parallel alignment of magnetic spins as seen in a bar magnet. Recent advances in computing technologies, such as spintronics and MRAM, take advantage of antiferromagnetism where the magnetic spins alternate from one to the next. In certain crystal structures, however, the spins take on even more complex arrangements. These are often created by frustration, where the interactions between spins cannot be satisfied locally or globally within the material resulting in complex and often non-coplanar spin textures. Frustration also leads to the close proximity of many different magnetic states, which can be selected by small perturbations in parameters like magnetic fields, temperature and pressure. It is this tunability that makes frustrated systems fundamentally interesting and highly desirable for applications. We move beyond frustration in insulators to itinerant systems where the interaction between mobile electrons and the non-coplanar magnetic states lead to quantum magneto-electric amplification. Here a small external field is amplified by many orders of magnitude by non-coplanar frustrated states. This greatly enhances their sensitivity and opens broader fields for applications. Our objective is to pioneer a new direction for condensed matter science at the Laboratory as well as for international community by discovering, understanding and controlling states that emerge from the coupling of itinerant charges to frustrated spin textures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin–orbit configuration interaction study of spectral properties of PbO

Relativistic calculations of the structural and spectral properties of the PbO molecule can provide fundamental information about the importance of a proper treatment of angular momentum coupling among electrons in order to achieve accurate computational results for spectral properties. Specifically, the nature of these couplings in PbO is expected to be intermediate between the LS- and jj-coupling limits because of its light/heavy element composition. This article reports potential energy curves, transition energies, electric dipole transition moments, permanent dipole moments and spectroscopic constants of PbO calculated using a multireference single plus double excitations spin–orbit configuration interaction approach in the context of relativistic effective core potentials and their concomitant spin–orbit coupling operators. The calculated results are in general agreement with both available experimental results as well as earlier calculations. New values for properties of excited states are also reported. It is noteworthy that certain properties show larger deviations from previous calculations. Furthermore, these deviations are attributed to direct and indirect relativistic effects resulting from diatomic electron–electron angular momentum coupling effects, which are included consistently in the calculations reported herein.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗