Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Enhancing Charge Transport of 2D Perovskite Passivation Agent for Wide-Bandgap Perovskite Solar Cells Beyond 21%

The replacement of a small amount of organic cations with bulkier organic spacer cations in the perovskite precursor solution to form a 2D perovskite passivation agent (2D-PPA) in 3D perovskite thin films has recently become a promising strategy for developing perovskite solar cells (PSCs) with long-term stability and high efficiency. However, the long, bulky organic cations often form a barrier, hindering charge transport. In this study, for the first time, 2D-PPA engineering based on wide-bandgap (~1.68?eV) perovskites are reported. Pentafluorophenethylammonium (F5PEA+) is introduced to partially replace phenylethylammonium (PEA+) as the 2D-PPA, forming a strong noncovalent interaction between the two bulky cations. The charge transport across and within the planes of pure 2D perovskites, based on mixed ammoniums, increases by a factor of five and three compared with that of mono-cation 2D perovskites, respectively. The perovskite films based on mixed-ammonium (F5PEA+-PEA+) 2D-PPA exhibit similar surface morphology and crystal structure, but longer carrier lifetime, lower exciton binding energy, less trap density and higher conductivity, in comparison with those using mono-cation (PEA+) 2D-PPA. The performance of PSCs based on mixed-cation 2D-PPA is enhanced from 19.58% to 21.10% along with improved stability, which is the highest performance for reported wide-bandgap PSCs.

14 SOLAR ENERGY↗

Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel

In this study, the joining of 6061-T6 aluminum alloy and DP590 steel using a M42 steel rivet via friction riveting technique is investigated. The surface morphology and microstructure characterization reveal the formation of an anchor zone that imparts mechanical interlock as well as the formation of metallurgical bonds at the interface of aluminum and steel. A combination of interlocking and bonding results in the achievement of a high load-carrying capacity of 5.7 kN during lap shear testing at room temperature. A finite element-based computational model was developed which accurately predicted the lap shear response of the joint. The model revealed that the metallurgical bond formed during fric-riveting adds 39% peak load strength to the joint. An extensive microstructural investigation, post-lap-shear fractography, and the modeling results, together provided insights on the joint failure mechanism. In conclusion, this study highlights that friction riveting is a promising method for aluminum-to-steel dissimilar joining, which is important for lighweighing automotive vehicles for energy efficiency.

36 MATERIALS SCIENCE↗

The effect of the target structure and composition on the ejection and transport of polymer molecules and carbon nanotubes in matrix-assisted pulsed laser evaporation

Matrix-assisted pulsed laser evaporation (MAPLE) is a prominent member of a broad and expanding class of laser-driven deposition techniques where a matrix of volatile molecules absorbs laser irradiation and provides the driving force for the ejection and transport of the material to be deposited. The mechanisms of MAPLE are investigated in coarse-grained molecular dynamic simulations focused on establishing the physical regimes and limits of the molecular transfer from targets with different structures and compositions. The systems considered in the simulations include dilute solutions of polymer molecules and individual carbon nanotubes (CNTs), as well as continuous networks of carbon nanotubes impregnated with solvent. The polymer molecules and nanotubes are found to be ejected only in the ablation regime and are incorporated into matrix-polymer droplets generated in the process of the explosive disintegration of the overheated matrix. The ejection and deposition of droplets explain the experimental observations of complex surface morphologies in films deposited by MAPLE. In simulations performed for MAPLE targets loaded with CNTs, the ejection of individual nanotubes, CNT bundles, and tangles with sizes comparable or even exceeding the laser penetration depth is observed. The ejected CNTs align along the flow direction in the matrix plume and tend to agglomerate into bundles at the initial stage of the ablation plume expansion. In a large-scale simulation performed for a target containing a network of interconnected CNT bundles, a large tangle of CNT bundles with the total mass of 50 MDa is separated from the continuous network and entrained with the matrix plume. No significant splitting and thinning of CNT bundles in the ejection process is observed in the simulations, suggesting that fragile structural elements or molecular agglomerates with complex secondary structures may be transferred and deposited to the substrate with the MAPLE technique.

Materials Science↗

Diminution in the Optical Band Gap and Near Band Edge Emission of Nickel-Doped Zinc Oxide Thin Films Deposited by Sol-Gel Method

Thin films of nickel-doped zinc oxide (Zn1−{sub x}Ni{sub x}O) show redshift in the optical band gap and in the near band edge (NBE) emission of the photoluminescence spectra. The Zn1−{sub x}Ni{sub x}O thin films obtained by sol-gel spin coating method show narrowing of the band gap from 3.23 to 3.00 eV as the concentration of nickel is increased from x = 0.00 to x = 0.06. All the Zn1−{sub x}Ni{sub x}O thin films have hexagonal wurtzite structure and show a decrease of 119 meV in the NBE emission as the dopant concentration is increased. X-ray diffraction (XRD) spectroscopy confirms the formation of ZnO in the films; Fourier transform infrared (FTIR) spectroscopy reaffirms this. Energy dispersive analysis (EDX) also ascertains the presence of Ni in the films and calculates the amount of dopant present in the films. Scanning electron microscopy (SEM) shows that all the Ni-doped ZnO thin films possess granular surface morphology.

36 MATERIALS SCIENCE↗

Understanding the influence of carbon addition on the corrosion behavior and mechanical properties of Al alloy “covetics”

The recent invention of a new processing method for metals and alloys involving the addition of carbon has led to several reports demonstrating an enhancement in the mechanical properties of the materials known as covetics. In this work the corrosion behavior and mechanical properties of a 6061 aluminum-carbon covetic are investigated and explained. Covetic samples with carbon added were found to exhibit a corrosion potential 40-70mV higher than samples processed without the addition of carbon. However, the corrosion current density of the covetic with carbon added relative to samples without carbon added was also increased. Surface characterization following the corrosion testing using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction revealed significant differences between the covetic with carbon added and the covetic parent material processed without carbon addition. After corrosion, the surface of the covetic with carbon added showed a alloying element rich surface morphology from the parent alloy and exhibited a smaller grain size than the material processed without carbon. Additionally, changes in the mechanical properties of the covetic were observed with both the hardness and the compressive strength of the covetic increasing as a result of carbon addition. Finally, the observed change in corrosion behavior and mechanical properties of the covetic with carbon added, along with the physical characterization, are consistent with the formation of a secondary phase in the alloy induced by carbon addition during the process used to make the covetic.

36 MATERIALS SCIENCE↗

Quick Microwave Assisted Synthesis and In Vitro Imaging Application of Oxygen Doped Fluorescent Carbon Dots

In this paper, a fast and simplest one-pot tactic was used to synthesis fluorescent oxygen doped carbon dots from Tween-20 (TTO-CDs) is reported. The TTO-CDs were microwavically synthesized by using Tween-20 as both the carbon precursor and the oxygen dopant as well. The surface morphology, crystalline and/or amorphous nature, composition and optical assets of synthesized TTO-CDs were studied by means of existing techniques. From the results, it was confirmed that the as-synthesized TTO-CDs are amorphous in nature, monodispersed, sphere-shaped and the typical particle size range is 5 ± 1.5 nm. The synthesized TTO-CDs emits strong blue fluorescence at 390 nm under excitation of 335 nm. Most interestingly, the excitation dependent emission property of synthesized TTO-CDs was exposed from fluorescence results. The synthesized TTO-CDs have quantum yield of about 14% against quinine sulfate as reference standard. The biotoxicity of synthesized TTO-CDs on HeLa cells was assessed through cytotoxicity assay. These results implied that the fluorescent TTO-CDs showed less biotoxicity, and further which was efficaciously applied as a multicolor staining and bioimaging probe for the confocal imaging of HeLa cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and Characterization of MoNb Films Superconducting at 100-200 mK

We have developed a new transition-edge sensor material with critical temperature (T-c) in the range 100-200 mK. The new material is a solid solution of two superconducting components, MoxNb1-x, co-sputtered from two high-purity single-component targets (Mo and Nb). The T-c has a minimum (dT(c)/dx = 0) at an intermediate concentration of the components. We have optimized the deposition parameters and composition to provide films with a sharp superconducting transition at ~ 150 mK. We investigated structural features of the films and surface morphology using X-ray diffraction (XRD) and scanning electron microscopy. The XRD measurements indicate that the grown films are polycrystalline, with a preferred orientation along the (110) crystal direction and a clear correlation between superconducting properties and film microstructure.

superconducting alloys↗

Optimization of Pineapple Leaf Fibre Extraction Methods and Their Biodegradabilities for Soil Cover Application

Cellulosic natural fibres from pineapple leaves are considered as a green alternative to the conventional polyethylene (PE) soil cover in agro-industry. The use of pineapple leaf fibres (PALFs) soil cover can overcome the disposal problem of the conventional plastic covers which take hundreds of years to degrade. This research was undertaken to study the effectiveness methods of extracting the PALFs. The mechanical method utilized ‘roller and bladder system’, where the chemical method involved the extraction with 6% NaOH, 20% aqueous acetone, and pineapple juice solution. The semi-mechanical method was a combination of “roller and bladder” system and a chemical retting process using 6% NaOH alkaline solutions. The characteristics of the extracted fibers were determined using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Kappa number test of the fibres extracted with semi-mechanical method showed the lowest percentage of lignin (3.39%). Based on XRD results, the highest percentage of crystallinity was recorded when PALF was extracted using the semi-mechanical method. A remarkable change on the morphological surface the biodegraded PALF soil cover was observed after 90 days of soil burial test. Biodegradability of soil cover made from PALF was higher than the commercial degradable soil cover i.e. PE/starch (80 wt% PE/ 20 wt% starch). Meanwhile, the growing rate and the soil fertility of chili tree that used PALFs soil cover showed better results than the chili tree that used conventional PE/starch soil cover.

36 MATERIALS SCIENCE↗

Influence of Plasticizers on Mechanical and Thermal Properties of Methyl Cellulose-Based Edible Films

Methyl cellulose (MC) films plasticized with malic acid (MA) and sorbitol (SOR) were prepared by casting solution and the influence of plasticizers at different concentrations (10, 20 and 30/100 g dry MC) on the mechanical and thermal properties were investigated. A decrease in tensile strength of the plasticized films was observed with increase in quantity of plasticizer. On the contrary, percentage elongation at break increased with an increase in plasticizer concentration that was more pronounced in SOR plasticized films. Films prepared with SOR exhibited higher water affinity and resulted in greater moisture absorption. Thermal stability was reduced with the addition of plasticizers and the SOR film samples were more thermally resistant as compared to MA-added films. FTIR analysis demonstrated the hydrogen bonding interactions between the functional groups of MC and plasticizers. The SEM micrographs of all the films showed a smooth and homogeneous surface morphology. The X-ray diffraction analysis suggested a semi-crystalline nature of the plasticized films.

36 MATERIALS SCIENCE↗

Annatto-colored Poly(3-hydroxybutyrate): A Comprehensive Study on Photodegradation

Annatto natural colorant was extracted from annatto seeds (Bixa Orellana L.) by using ultrasound. Structural characterization of the extract was done by FTIR. The aim of the present work was the developement and characterization of biodegradable colored films based on poly(3-hydroxybutyrate) by using annatto colorant. The annatto content in the films was varied from 0.2 to 3.0% (w/w). The lightfastness of colored films when exposed to UVA radiation was controlled by using RGB color system. In color image processing, a pixel is often defined by three values corresponding to the tristimuli R (Red), G (Green) and B (Blue). With the addition of the annatto colorant, photodegradation of films under UVA exposure seemed to be improved. The good thermal stability of the colored film with 3.0% (w/w) of annatto colorant was confirmed by thermogravimetric analysis. Surface morphology of the colored film with 3.0% (w/w) of annatto colorant was examined by SEM prior and after 240 h of UVA exposure. The SEM micrographs suggested that annatto colorant has acted as hiding agent, reducing the photodegradation processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel Thin Film Composite Nanofiltration Membrane Using Monoethanolamine (MEA) and Diethanolamine (DEA) with m-Phenylenediamine (MPD)

A novel thin-film composite (TFC) nanofiltration membrane was prepared by interfacial polymerization of polyamide layer on a polyethersulfone support, using monoethanolamine (MEA) and diethanolamine (DEA) with m-phenylenediamine as monomers and trimesoyl chloride (TMC) as crosslink agent. The membrane surface before and after using aminoalcohol monomers (MEA and DEA) was investigated in detail using ATR-FTIR, TGA, AFM and SEM. The AFM and SEM images showed that addition of MEA and DEA had a strong impact on surface morphology. The polyamide layer thickness of control and modified TFC membranes based on MEA and DEA were calculated to be in 180–230 nm range and the mean pore sizes were about 0.35–1.2 nm. The RO performance tests indicated that addition of MEA and DEA can increase the NaCl and Na{sub 2}SO{sub 4} rejection remarkably with little decline in the pure water permeation flux.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Green Synthesis of Silver Nanoparticle Capped with Allium cepa and Their Catalytic Reduction of Textile Dyes: An Ecofriendly Approach

Today, environment pollution control is a matter of concern, everybody is willing to make a product that should be ecofriendly. Nowadays, water resources are full of untreated waste materials, discharge of hazardous and toxic dyes coming from textile and other chemical industries. These environmental hazards are difficult to remove by commercial water treatment plans, thus we need something that would present an efficient means for removal of these hazards. In this research paper, we have synthesize silver nanoparticle in a green way by using aqueous extract of Allium cepa (onion), and further these silver nanoparticle were tested for the catalytic degradation of various dyes by UV/Visible spectroscopy and silver nanoparticle showed reduction in dyes intensity after a particular period of incubation time. SEM and TEM, Particle size and Zeta potential analysis was done to analyze the surface morphology, particle size range and stability of the silver nanoparticle. Greenly synthesized silver nanoparticle was found to be spherical in shape, having particle size value ranged from 50 to 100 nm with a zeta potential value of −29 mV. An EDX spectroscopy method was used to confirm the presence of silver nanoparticle in the synthesized material. An X-ray crystallography was done to ensure the crystallinity of the silver nanoparticle. Further an ATR-FTIR was performed to confirm the capping of the silver nanoparticle with the phenolic group of the onion. All these study emphasized that silver nanoparticle capped with onion (AgNPs@Ac) is the excellent catalyst for the reduction of hazardous and toxic dyes as well as they serve best purpose of the eco-friendly approach.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of Biocomposites from Agro Wastes for Low Dielectric Applications

The present work is attempting to synthesize and characterizations of a novel carbazole core containing cardanol based benzoxazine monomer from carbazole core containing aromatic diamine, cardanol and paraformaldehyde. In addition, carbazole core containing cardanol based benzoxazine polymer and various weight percentages of amine functionalized rice husk ash incorporated carbazole core containing cardanol based polybenzoxazine composites were prepared. The prepared polymer and its composites were characterized by FTIR, XRD, DSC, TGA and dielectric studies. The various studies confirm that the composites show increased Tg, higher char yield and better thermal stability compared to carbazole core containing cardanol based benzoxazine polymer. In addition to that the composites show significant decrease in the dielectric constant values than the neat cardanol based polybenzoxazine. The surface morphology and the distribution of rice husk ash in carbazole core containing cardanol based polybenzoxazine composites are confirmed by SEM and TEM analysis. Hence, the present study has attempted to prepared eco-friendly value added carbazole core containing cardanol based polybenzoxazine products for low dielectric constant applications by making use of biowaste for both matrix and reinforcement preparation to form biowaste based composites. Graphical Abstract: Schematic representation for the preparation of carbazole core containing cardanol based benzoxazine monomer, polybenzoxazine and biobased polybenzoxazine composites .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chitosan–Gelatin @ Tin (IV) Tungstatophosphate Nanocomposite Ion Exchanger: Synthesis, Characterization and Applications in Environmental Remediation

The present study reported the synthesis of novel organic–inorganic hybrid nanocomposite by incorporating tin (IV) based ion exchanger into the hybrid polymer network of chitosan and gelatin prepared under vacuum for the efficient removal of heavy metal ions and toxic dyes from an aqueous fluid. The physicochemical studies such as ion exchange capacity (IEC), chemical stability, thermal stability, pH titration and distribution behaviour studies were also carried out to determine the cation exchange behaviour of the material. The surface morphology and structural properties were studied by the techniques such as FTIR, FESEM, EDS, TEM and XRD. Distribution studies confirmed the synthesized CG/STPNC had the highest selectivity for Pb{sup 2+} ions (85.3 mL/g). Maximum adsorption of methylene blue (82%) was achieved within 240 min at 500 mg of adsorbent dose, 10 mg/L of the initial concentration of dye, pH of 7 and 30 °C of temperature. Adsorption kinetic data fitted well with pseudo-second order rate model with R{sup 2} = 0.995. The correlation value 0.95 and favourable R{sub L} = 0.21 of adsorption data suggested better fit for Langmuir adsorption. Thus the synthesized nanocomposite ion exchanger was found to be a promising cation exchanger as well as an adsorbent for heavy metal ion and dye removal from textile industrial effluents. Graphical abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural Modification of Starch Nanoparticles Via Graft Copolymerization Using KMnO{sub 4}, HClO{sub 4} and HNO{sub 3} Redox Pair

The novelty addressed here is commenced with a view to use our formerly prepared starch nanoparticles (SNPs) of size around 80–100 nm as a starting substrate for grafting meth acrylic acid (MAA) using KMnO{sub 4}, HClO{sub 4} in presence of HNO{sub 3} as innovative redox pair in aqueous medium. This was done to see the effect of SNPs with respect to well-dispersed nanosized particles, large surface areas, biodegradability and reactivity on the rate and extent of grafting. Besides; maximize the graft yield and graft reaction efficiency and reduce the homopolymer formation to lower extent. This could be accomplished via an in-depth assessment into the chief factors affecting the polymerization reaction such as initiator, monomer, SNPs and acid concentrations, time and temperature of polymerization, and liquor ratio. The results obtained indicate that the magnitude of the polymer yield including graft yield, graft reaction efficiency and homopolymer formation are determined by these factors. The structure of the resultant copolymers was confirmed instrumentally by Fourier transforms infrared spectroscopy; while both the surface morphology, crystalline structure and thermal properties were characterized by scanning electron microscopy, X-ray diffraction and thermal gravimetric analysis. Furthermore, the resultant copolymers were evaluated as environmental remediation materials via cadmium ions and cationic dyes removal from their solutions with different extent; in addition to higher swelling and chemical resistance in water as polar solvent and hydrochloric acid as acidic solution. The anticipated mechanisms involved in the synthesis are reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polymer Based Palladium Nanocatalyst for the Degradation of Nitrate and Congo Red

In this study, the Pd catalyst based on chitosan-tannin (CT) framework as support was prepared and characterized. The CT support and Pd catalyst were characterized by attenuated total reflection (ATR) spectroscopy and Raman spectroscopy, Scanning electron microscopy-energy dispersive X-ray analyzer (SEM–EDX) and transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Attenuated total reflection (ATR) spectra revealed the coordination of Pd via hydroxyl and amino functional groups. Raman spectral analysis was carried out to give information about the structural defect of the catalyst compared to CT support. The SEM–EDX results revealed regular surface morphology and presence of Pd in the catalyst as compared to CT support. TEM analysis revealed that the deposition of Pd on organic support with a spherical shape possessing size in the range of 6.01 nm–20.7 nm (average particle size = 12.65 ± 3.14 nm). The XRD results revealed the amorphous nature of the catalyst compared to CT support. TGA analysis revealed that the catalyst is highly thermally-stable compared to CT support. The catalytic activity of Pd catalyst was investigated for the reduction of nitrate and Congo red in the presence and absence of H{sub 2}. The catalytic activities exhibited 71.11% and 23% removal of nitrate and Congo red in 20 and 60 min, respectively. Thus, results suggested that Pd catalyst has a potential of catalytic activity toward reduction of nitrate and Congo red in presence H{sub 2}.

36 MATERIALS SCIENCE↗

High Removal Capacity of Arsenic from Drinking Water Using Modified Magnetic Polyurethane Foam Nanocomposites

In this study, a novel polyurethane foam (PU) nanocomposite adsorbent based on silane-modified magnetic iron-oxide nanoparticles (Fe{sub 3}O{sub 4}@APTES) is synthesized via a low cost and simple in situ polymerization method for the removal of arsenic ions from aqueous solutions. The chemical structure and surface morphology of the prepared nanoparticles and adsorbent were characterized using Fourier transform infrared spectroscopy, attenuated total reflection, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Inductively coupled plasma mass spectrometry was used to measure the arsenic concentration of the treated solutions. Sorption isotherms models were applied to determine the adsorption mechanism and modeling parameters. The removal capacity of the modified PU foam was at its highest during a contact time of four hours which resulted in a removal capacity of 95%. Kinetic studies were conducted to determine the adsorption capacity and the uptake rate of arsenic. A Pseudo-order model was found to be the best fit model for adsorption. The prepared adsorbent can be separated from the solution by using an external magnet field.

36 MATERIALS SCIENCE↗

Disintegration and Biodegradation in Soil of PBAT Mulch Films: Influence of the Stabilization Systems Based on Carbon Black/Hindered Amine Light Stabilizer and Carbon Black/Vitamin E

This work characterized the disintegration and biodegradation of aged samples of PBAT films with and without photostabilization additives. The objective is to correlate these processes with properties affected after aging, i.e. molecular weight and gel content. Three different formulations were studied: pure polymer; PBAT with carbon black and hindered amine light stabilizer (HALS) and PBAT with carbon black and phenolic stabilizer vitamin E. The samples were monitored for 12 months. As expected, the lower level of photostabilization lead to the higher disintegration and biodegradation rates. Nevertheless, mineralization test showed that during time the differences among biodegradation rates become subtler. The crystallinity degree presented changes only at an advanced stage of degradation process, showing a reduction. The evaluation of the carbonyl index, molecular weight, surface morphology and visual analysis allowed to observe that the aged samples with lower gel content and lower molecular weight showed a faster degradation rate. The changes in material structure due to the increase of aromatic units concentration is the main hypothesis to explain the material behavior during degradation in soil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗