Search NASA⌕ Search

SEARCH · Search NASA

Results for “synchronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Synchronization and phase locking of resonant magnet power supplies for Mu2e experiment at Fermilab

The Mu2e Experiment has stringent beam structure requirements; namely, it requires short (~200 ns) proton bunches separated by 1.5-2.0 $\mu$s. This beam structure will be produced using the Fermilab 8 GeV Booster, the 8 GeV Recycler Ring, and the Delivery Ring, which was formerly part of the antiproton accumulator system. Out of time beam is limited to a fraction of level of no more than $1\times 10^{-10}$, a requirement known as "extinction". Achieving this level of extinction requires a system of resonant magnets and collimators, phased such that only in time particles will pass through. The Mu2e magnet system involves two components: a 300 kHz component, timed such that the 600 kHz beam will pass through the collimators at the nodes, and a 4.5 MHz system to reduce the slewing of the in-time beam. These two systems must be precisely phase locked to the bunch rate coming from the Delivery Ring, which itself must be phased to match beam transfers coming from the Recycler. This poster describes the control system for the magnets, which is based on an Intel Arria FPGA, which handles phase locking of the magnets to the Delivery Ring, including the phase jumps required to match transfers from the Recycler.

43 PARTICLE ACCELERATORS↗

Analysis of Factors Controlling Cell Cycle that Can Be Synchronized Nondestructively During Root Cap Development

Publications and presentations during the final funding period, including progress in defining the substrate specificity, the primary goal of the project, are listed below. Both short-term and long-term responses mediated by PsUGT1 have been characterized in transgenic or mutant pea, alfalfa, and Arabidopsis with altered expression of PsUGT1. Additional progress includes evaluation of the relationship between control of the cell cycle by PsUGT1 and other glycosyltransferase and glycosidase enzymes that are co-regulated in the legume root cap during the onset of mitosis and differentiation. Transcriptional profiling and multidimensional protein identification technology ('MudPIT') have been used to establish the broader molecular context for the mechanism by which PsUGT1 controls cell cycle in response to environmental signals. A collaborative study with the Norwegian Forest Research Institute (who provided $10,000.00 in supplies and travel funds for collaborator Dr. Toril Eldhuset to travel to Arizona and Dr. H. H. Woo to travel to Norway) made it possible to establish that the inducible root cap system for studying carbohydrate synthesis and solubilization is expressed in gymnosperm as well as angiosperm species. This discovery provides an important tool to amplify the potential applications of the research in defining conserved cell cycle machinery across a very broad range of plant species and habitats. The final work, published during 2009, revealed an additional surprising parallel with mammalian immune responses: The cells whose production is controlled by PsUGT1 appear to function in a manner which is analogous to that of white blood cells, by trapping and killing in an extracellular manner. This may explain why mutation within the coding region of PsUGT1 and its homolog in humans (UGT1) is lethal to plants and animals. The work has been the subject of invited reviews. A postdoctoral fellow, eight undergraduate students, four M.S. students and three Ph.D. students have been supported.

59 BASIC BIOLOGICAL SCIENCES↗

Synchronized Phasor Data for Analyzing Wind Power Plant Dynamic Behavior and Model Validation

The U.S. power industry is undertaking several initiatives that will improve the operations of the power grid. One of those is the implementation of 'wide area measurements' using phasor measurement units (PMUs) to dynamically monitor the operations and the status of the network and provide advanced situational awareness and stability assessment. This project seeks to obtain PMU data from wind power plants and grid reference points and develop software tools to analyze and visualize synchrophasor data for the purpose of better understanding wind power plant dynamic behaviors under normal and contingency conditions.

17 WIND ENERGY↗

Efficient Synchronization Stability Metrics for Fault Clearing

Direct methods can provide rapid screening of the dynamical security of large numbers fault and contingency scenarios by avoiding extensive time simulation. We introduce a computationally-efficient direct method based on optimization that leverages efficient cutting plane techniques. The method considers both unstable equilibrium points and the effects of additional relay tripping on dynamical security[1]. Similar to other direct methods, our approach yields conservative results for dynamical security, however, the optimization formulation potentially lends itself to the inclusion of additional constraints to reduce this conservatism.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Slycat Enables Synchronized 3D Comparison of Surface Mesh Ensembles [Brief]

In support of analyst requests for Mobile Guardian Transport studies, researchers at Sandia National Laboratories have expanded data types for the Slycat ensemble-analysis and visualization tool to include 3D surface meshes. This new capability represents a significant advance in our ability to perform detailed comparative analysis of simulation results. Analyzing mesh data rather than images provides greater flexibility for post-processing exploratory analysis.

36 MATERIALS SCIENCE↗

Detuned synchronized waveform averaging for reducing distortions due to sample interleaving

This invention introduces a method for optimally detuning the ratio of analog-to-digital (ADC) sample rate and trigger rate during waveform averaging to minimize the deleterious effects from sample interleaving. A prescription is described for determining the optimal detuning factor for the ADC or trigger rate in any scenario, depending on the number of ADC cores used and the limited tuning resolution of the clock rates for a specific implementation.

42 ENGINEERING↗

Low Power, Radiation Resilient Synchronous Edge Processing for Remote Monitoring

Next-generation space remote sensing systems may be equipped with imaging arrays that sense data at a rate that outstrips the processing capability of any computing hardware that can operate within a satellite’s power budget. This project developed novel convolutional and recurrent neural networks to detect and estimate point-like events amid clutter, and investigated their efficient and accurate implementation on analog in-memory computing systems that are 10-1000× more energy-efficient than digital processors. This project leveraged two memory devices at different levels of technological maturity: a large-scale analog computing prototype using commercial SONOS charge-trap memory, and electrochemical memory (ECRAM) with intrinsic radiation hardness. We experimentally demonstrated end-to-end analog processing of our neural networks on SONOS and characterized the radiation response of both SONOS and ECRAM. We advanced the state-of-the-art in ECRAM precision and reliability, and developed co-design methods to enable accurate long-term operation of SONOS analog accelerators in space radiation environments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Center for Alternative Synchronization and Timing (CAST) Technical Bulletin #007: Holdover Experiment #1

Stable and accurate timing forms the foundation of many modern essential services. While Global Navigation Satellite Systems (GNSS) provide a cheap way to achieve extremely accurate timing, these systems are vulnerable to interference and complete outages, forcing systems that rely on them into a state of holdover. Testing and characterizing holdover performance is therefore essential for ensuring that these modern services do not go down when GNSS-based timing is unavailable.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Center for Alternative Synchronization and Timing (CAST) Technical Bulletin #006: Holdover Experimental Summary

Stable and accurate timing forms the foundation of many modern essential services. While Global Navigation Satellite Systems (GNSS) provide a cheap way to achieve extremely accurate timing, these systems are vulnerable to interference and complete outages, forcing systems that rely on them into a state of holdover. Testing and characterizing holdover performance is therefore essential for ensuring that these modern services do not go down when GNSS-based timing is unavailable.

24 POWER TRANSMISSION AND DISTRIBUTION↗