Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alternative data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Using ecological zones to increase the detail of Landsat classifications

Changes in classification detail of forest species descriptions were made for Landsat data on 2.2 million acres in northwestern California. Because basic forest canopy structures may exhibit very similar E-M energy reflectance patterns in different environmental regions, classification labels based on Landsat spectral signatures alone become very generalized when mapping large heterogeneous ecological regions. By adding a seven ecological zone stratification, a 167% improvement in classification detail was made over the results achieved without it. The seven zone stratification is a less costly alternative to the inclusion of complex collateral information, such as terrain data and soil type, into the Landsat data base when making inventories of areas greater than 500,000 acres.

Fox, L., III↗
NASA NTRS1989

Calculation of structural dynamic forces and stresses using mode acceleration

While the standard mode acceleration formulation in structural dynamics has often been interpreted to suggest that the reason for improved convergence obtainable is that the dynamic correction factor is divided by the modal frequencies-squared, an alternative formulation is presented which clearly indicates that the only difference between mode acceleration and mode displacement data recovery is the addition of a static correction term. Attention is given to the advantages in numerical implementation associated with this alternative, as well as to an illustrative example.

Blelloch, Paul↗
NASA NTRS2017

Hyperspectral Radiative Transfer Modeling to Explore the Combined Retrieval of Biophysical Parameters and Canopy Fluorescence from FLEX - Sentinel-3 Tandem Mission Multi-Sensor Data

The FLuorescence EXplorer (FLEX) satellite mission, selected as ESA's 8th Earth Explorer, has been designed forthe measurement of sun-induced fluorescence (F) spectra emitted by plants. This will be accomplished through amulti-sensor approach by placing it in a common orbit in tandem with the Sentinel-3 (S3) mission, which willhave two optical sensors on board, OLCI (Ocean and Land Colour Instrument) and SLSTR (Sea and Land SurfaceTemperature Radiometer) to complement FLEX. These S3 instruments will be used in combination with theimaging spectrometers on board FLEX to provide data useful for atmospheric correction of FLEX data. However,a fully synergetic approach, i.e. by exploiting the spectral and directional information from all tandem missioninstruments together, is an attractive alternative which is explored in this paper. By employing all combined topof-atmosphere (TOA) spectral radiance data, one can (i) characterize the relevant optical properties of the atmosphere,(ii) retrieve biophysical canopy properties including the associated reflectance anisotropy, and (iii)retrieve a more accurate and consistent canopy F.Regarding retrieval methods, Fraunhofer Line Depth (FLD) and Spectral Fitting (SF) are well-known techniquesapplied to hyperspectral data. Both methods depend on a high spectral resolution and assume aLambertian (isotropic) canopy reflectance. However, most vegetation canopies are non-Lambertian. This impliesthat, in particular when ignoring the anisotropic surface reflection, substantial retrieval errors can occur due tothe interaction between atmospheric absorption bands and surface reflectance anisotropy. In this paper, a novelmethod based on spectral radiative transfer (RT) modeling is proposed, in which coupled RT models are used tosimulate TOA radiance spectra. These are then matched with ‘measured' spectra in order to retrieve surfacefluorescence, along with a suite of biophysical parameters, by model inversion through optimization. By applyingcoupled RT models of the soil-leaf-canopy and the surface-atmosphere systems, TOA radiance spectra canbe simulated for all optical sensors of this tandem mission. In this way, complex effects due to surface reflectanceanisotropy and the spectral sampling by the various instruments, which are difficult to compensate for in the endproducts, are properly taken into account by their incorporation in the forward modeling. Next, by model inversionof TOA radiance data via optimization, the most accurate F retrievals can be achieved in a consistentmanner, along with important canopy level biophysical parameters that may help interpret the F spectrum, suchas chlorophyll content and leaf area index (LAI). The potential of this approach has been explored in a numericalexperiment, and the results are presented in this paper. We find that, with the assumed well-characterized andplausible FLEX/S3 instrument performances, the simultaneous retrieval of biophysical canopy parameters and Fspectra would be possible with a remarkable accuracy, provided the correct atmospheric characterization isavailable.

Verhoef, Wouter↗
DOE OSTI2019

Interpreting mixing relationships in energetic melts to estimate vapor contribution and composition

Heterogeneous, glassy debris can be produced by energetic events such as near surface nuclear explosions and asteroid impacts. In these events, the resultant debris comprises a rapidly-cooled mixture of the projectile or bomb material with proximate materials such as soil and anthropogenic structures. Glasses formed in these events preserve inter and/or intra sample compositional variation reflecting complex mixtures of the precursor materials or their chemically fractionated products. Understanding formation mechanisms and chemical processes relating to energetic glass formation based on study of the end products requires an objective method for calculating the precursor components that mixed together to produce the final product. Here, we compare a set of multivariate linear-least squares approaches to address the unmixing problem of heterogeneous glasses including classical least squares (CLS), principal component analysis (PCA) and two multivariate curve resolution – alternating least squares (MCR-ALS) approaches. We generate a synthetic data set representing spatially resolved, compositional data in a set of heterogeneously mixed glasses to understand model sensitivity to precursor abundance and composition. We explore the impact of incomplete knowledge of the system prior to the formation of the melts on the resulting confidence and accuracy of the solution (i.e., the number, composition, and abundances of the precursor materials). We conclude that a closure and equality constrained MCR-ALS approach succeeds in identifying unrecognized precursor components and is a suitable alternative to CLS approaches when the investigator has incomplete knowledge of the starting precursor chemical compositions. Finally, we demonstrate application of this MCR-ALS approach to measurements of Trinitite.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1981

Jay Carter Enterprises, Incorporated steam engine

The Small Community Solar Thermal Power Experiment (SCSE) selected an organic rankine cycle (ORC) engine driving a high speed permanent magnet alternator (PMA) as the baseline power conversion subsystem (PCS) design. The back-up conceptual PCS design is a steam engine driving an induction alternator delivering power directly to the grid. The development of the automotive reciprocating simple rankine cycle steam engine and how an engine of similar design might be incorporated into the SCSE is discussed. A description of the third generation automotive engine is included along with some preliminary test data. Tests were conducted with the third generation engine driving an induction alternator delivering power directly to the grid. The purpose of these tests is to further verify the effects of expander inlet temperature, input thermal power level, expansion ratio, and other parameters affecting engine performance to aid in the development of an SCSE PCS.

Source record↗
DOE OSTI2012

A Summary of Information on the Behavior of the Yakima Fold Belt as a Structural Entity

This document is one in a series of topical reports compiled by the Pacific Northwest National Laboratory to summarize technical information on selected topics important to the performance of a probabilistic seismic hazard analysis (PSHA) of the Hanford Site. The purpose of this report is to summarize available data and analyses relevant to the Yakima Fold Belt (YFB) that may bear on the question of whether or not the YFB behaves as a single seismotectonic province in which activity along one fold structure is representative of behavior along all other fold structures. This topic has met with a fairly high level of contention in the expert community and has the potential to result in significant impacts on an evaluation of seismic hazard at the Hanford Site. This report defines the relevant alternative conceptual models relevant to this technical issue and the arguments and data that support those models. It provides a brief description of the technical issue and principal uncertainties; a general overview on the nature of the technical issue, along with alternative conceptual models, supporting arguments and information, and uncertainties; and finally, it suggests some possible approaches for reducing uncertainties regarding this issue.

Last, George V.↗
DOE OSTI2015

Simplified predictive models for CO 2 sequestration performance assessment

CO2 sequestration in deep saline formations is increasingly being considered as a viable strategy for the mitigation of greenhouse gas emissions from anthropogenic sources. In this context, detailed numerical simulation based models are routinely used to understand key processes and parameters affecting pressure propagation and buoyant plume migration following CO2 injection into the subsurface. As these models are data and computation intensive, the development of computationally-efficient alternatives to conventional numerical simulators has become an active area of research. Such simplified models can be valuable assets during preliminary CO2 injection project screening, serve as a key element of probabilistic system assessment modeling tools, and assist regulators in quickly evaluating geological storage projects. We present three strategies for the development and validation of simplified modeling approaches for CO2 sequestration in deep saline formations: (1) simplified physics-based modeling, (2) statisticallearning based modeling, and (3) reduced-order method based modeling. In the first category, a set of full-physics compositional simulations is used to develop correlations for dimensionless injectivity as a function of the slope of the CO2 fractional-flow curve, variance of layer permeability values, and the nature of vertical permeability arrangement. The same variables, along with a modified gravity number, can be used to develop a correlation for the total storage efficiency within the CO2 plume footprint. Furthermore, the dimensionless average pressure buildup after the onset of boundary effects can be correlated to dimensionless time, CO2 plume footprint, and storativity contrast between the reservoir and caprock. In the second category, statistical “proxy models” are developed using the simulation domain described previously with two approaches: (a) classical Box-Behnken experimental design with a quadratic response surface, and (b) maximin Latin Hypercube sampling (LHS) based design with a multidimensional kriging metamodel fit. For roughly the same number of simulations, the LHS-based metamodel yields a more robust predictive model, as verified by a k-fold cross-validation approach (with data split into training and test sets) as well by validation with an independent dataset. In the third category, a reduced-order modeling procedure is utilized that combines proper orthogonal decomposition (POD) for reducing problem dimensionality with trajectory-piecewise linearization (TPWL) in order to represent system response at new control settings from a limited number of training runs. Significant savings in computational time are observed with reasonable accuracy from the PODTPWL reduced-order model for both vertical and horizontal well problems – which could be important in the context of history matching, uncertainty quantification and optimization problems. The simplified physics and statistical learning based models are also validated using an uncertainty analysis framework. Reference cumulative distribution functions of key model outcomes (i.e., plume radius and reservoir pressure buildup) generated using a 97-run full-physics simulation are successfully validated against the CDF from 10,000 sample probabilistic simulations using the simplified models. The main contribution of this research project is the development and validation of a portfolio of simplified modeling approaches that will enable rapid feasibility and risk assessment for CO2 sequestration in deep saline formations.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Consideration of Alternate Working Fluid Properties in Gas Lubricated Foil Journal Bearings

The Oil-Free Turbomachinery Program at the NASA Glenn Research center is committed to, revolutionary improvements in performance, efficiency and reliability of turbomachinery propulsion systems. One of the key breakthroughs by which this goal is being achieved is the maturation of air lubricated foil bearing technology. Through experimental testing, foil bearings have demonstrated a variety of exceptional qualities that show them to have an important role in the future of rotordynamic lubrication. Most of the work done with foil bearings thus far has considered ambient air at atmospheric pressure as the working fluid or lubricating fluid in the bearing. However, special applications of oil-free technology require the use of air at non- standard ambient conditions or completely different working fluids altogether. The NASA Jupiter Icy Moon Orbiter program presents power generation needs far beyond that of any previous space exploration effort. The proposed spacecraft will require significant power generation to provide the propulsion necessary to reach the moons of Jupiter and navigate between them. Once there, extensive scientific research will be conducted that will also present significant power requirements. Such extreme needs require exploring a new method for power generation in space. A proposed solution involves a Brayton cycle nuclear fission reactor. The nature of this application requires reliable performance of all reactor components for many years of operation under demanding conditions. This includes the bearings which will be operating with an alternative working fluid that is a combination of Helium and Xenon gases commonly known as HeXe. This fluid has transport and thermal properties that vary significantly from that of air and the effect of these property differences on bearing performance must be considered. One of the most promising applications of oil-free technology is in aircraft turbine engines. Eliminating the oil supply systems from aircraft engines will lead to significant weight and maintenance reduction. In such applications, the lubricating fluid will be high altitude air. This air will be at much lower pressure than that at sea level. Again this property change will result in a change in bearing performance, and analysis is required to quantify this effect. The study of these alternate working fluid properties will be conducted in two ways: analytically and experimentally. Analytical research will include the use of a mathematical code that can predict film thickness profiles for various ambient conditions. Estimations of load capacity can be made based upon the film thickness trends. These values will then be compared to those obtained from classical rigid bearing analysis. Experimental Research will include testing a foil bearing at a variety of ambient air pressures. The analytical and experimental data will be compared to draw conclusions on bearing performance under alternate working fluid properties.

Smith, Matthew J.↗
DOE OSTI2024

Efficient and generalizable nested Fourier-DeepONet for three-dimensional geological carbon sequestration

Geological carbon sequestration (GCS) involves injecting CO2 into subsurface geological formationsfor permanent storage. Numerical simulations could guide decisions in GCS projects by predictingCO 2 migration pathways and the pressure distribution in storage formation. However, these simula-tions are often computationally expensive due to highly coupled physics and large spatial-temporalsimulation domains. Surrogate modelling with data-driven machine learning has become a promis-ing alternative to accelerate physics-based simulations. Among these, the Fourier neural operator(FNO) has been applied to three-dimensional synthetic subsurface models. Despite its good accuracyin simulating CO 2 plume migration, it requires large computational resources in training and alsolacks generalizability. Here, to further improve performance, we have developed a nested Fourier-DeepONet by combining the expressiveness of the FNO with the modularity of a deep operatornetwork (DeepONet). This new framework is twice as efficient as a nested FNO for training and has atleast 80% lower GPU memory requirement due to its flexibility to treat temporal coordinates sepa-rately. These performance improvements are achieved without compromising prediction accuracy.In addition, the generalization and extrapolation ability of nested Fourier-DeepONet beyond thetraining range has been thoroughly evaluated. Nested Fourier-DeepONet outperformed the nestedFNO for extrapolation in time with more than 50% reduced error. It also exhibited good extrapolationaccuracy beyond the training range in terms of reservoir properties, number of wells, and injectionrate.

Lee, Jonathan E. [Department of Chemical and Envir↗
NASA NTRS1981

Establishment of terrestrial reference frames by new observational techniques

It is anticipated that terrestrial reference systems for geodynamics studies which include adopted plate motion models will be introduced for the analysis of both LAGEOS satellite and very long baseline interferometry ranging data. One of the possible approaches involves adjustment of ground station coordinates in conjunction with solutions for Universal Time 1 (UT1) and polar motions as functions of time. Another method uses principal value decomposition to reduce the number of degrees of freedom being solved for by three. In a third alternative, the values of UT1 and polar motion derived from the available data by means of the initial set of coordinates are kept fixed, and an appropriate block of data is reanalyzed using the previously determined values of UT1 and polar motion so that a new set of station coordinates can be derived.

Bender, P. L.↗
DOE OSTI2025

mzPeak: Designing a Scalable, Interoperable, and Future-Ready Mass Spectrometry Data Format

Advances in mass spectrometry (MS) instrumentation, such as higher resolution, faster scan speeds, and improved sensitivity, have significantly increased the volume and complexity of data. The growing adoption of imaging and ion mobility further amplifies these challenges across MS-based omics fields, including proteomics, metabolomics, and lipidomics. While these technologies unlock new possibilities, they also present significant challenges in data management, storage, and accessibility. Existing open formats, such as the XML-based community standards mzML and imzML, struggle to meet the demands of modern MS workflows due to their large file sizes, slow data access, and limited metadata support. Vendor-specific formats, while optimized for proprietary instruments, lack interoperability, comprehensive metadata support and long-term archival reliability. This white paper lays the groundwork for mzPeak, a next-generation community data format designed to address these challenges and support high-throughput, multi-dimensional MS workflows. By adopting a hybrid model that combines efficient binary storage for numerical data and both human and machine-readable metadata storage, mzPeak will reduce file sizes, accelerate data access, and offer a scalable, adaptable solution for evolving MS technologies. For researchers, mzPeak will enable enhanced interoperability across platforms, seamless support for complex workflows including ion mobility and MS imaging, and faster data access compared to existing community formats such as mzML. Its design will ensure data is managed in compliance with regulatory standards, essential for applications such as precision medicine and chemical safety, where long-term data integrity and accessibility are critical. For vendors, mzPeak provides a streamlined, open alternative to proprietary formats, reducing the burden of regulatory compliance while aligning with the industry's push for transparency and standardization. By offering a high-performance, interoperable solution, mzPeak positions vendors to meet customer demands for sustainable data management tools which will be able to handle emerging and future data types and workflows. mzPeak aspires to become the cornerstone of MS data management, empowering researchers, vendors, and developers to innovate and collaborate more effectively.

data formats↗
DOE OSTI2025

Extracting Material Property Measurements from Scientific Literature with Limited Annotations

Extracting material property data from scientific text is pivotal for advancing data-driven research in chemistry and materials science; however, the extensive annotation effort required to produce training data for named entity recognition (NER) models for this task often makes it a barrier to extracting specialized data sets. Here, in this work, we present a comparative study of the conventional, supervised NER methodology to alternative few-shot learning architectures and large language model (LLM)-based approaches that mitigate the need to label large training data sets. We find that the best-performing LLM (GPT-4o) not only excels in directly extracting relevant material properties based on limited examples but also enhances supervised learning through data augmentation. We supplement our findings with error and data quality assessments to provide a nuanced understanding of factors that impact property measurement extraction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dehydration synthesis and crystal structure of terbium oxychloride, TbOCl

Terbium oxychloride, TbOCl, was synthesized via a simple heat-treatment of TbCl3·6H2O. The structure was determined using X-ray powder diffraction (XRD) data. The TbOCl compound crystallizes within the tetragonal P4/nmm space group, and its crystal structure is composed of alternating layers of (TbO)n and n Cl- anions. The unit cell parameters, volume, and density were compared to the literature data of other isostructural rare-earth oxychlorides in the P4/nmm space group and showed a good agreement when fitted to the calculated trendlines.

oxychloride, rare-earth oxyhalide, powder diffract↗
NASA NTRS2008

James Webb Space Telescope - L2 Communications for Science Data Processing

JWST is the first NASA mission at the second Lagrange point (L2) to identify the need for data rates higher than 10 megabits per second (Mbps). JWST will produce approximately 235 Gigabits of science data every day that will be downlinked to the Deep Space Network (DSN). To get the data rates desired required moving away from X-band frequencies to Ka-band frequencies. To accomplish this transition, the DSN is upgrading its infrastructure. This new range of frequencies are becoming the new standard for high data rate science missions at L2. With the new frequency range, the issues of alternatives antenna deployment, off nominal scenarios, NASA implementation of the Ka-band 26 GHz, and navigation requirements will be discussed in this paper. JWST is also using Consultative Committee for Space Data Systems (CCSDS) standard process for reliable file transfer using CCSDS File Delivery Protocol (CFDP). For JWST the use of the CFDP protocol provides level zero processing at the DSN site. This paper will address NASA implementations of Ground Stations in support of Ka-band 26 GHz and lesson learned from implementing a file base (CFDP) protocol operational system.

Johns, Alan↗
DOE OSTI2013

A RHIC-style IPM in the Brookhaven AGS

Beam profiles in the two storage rings of the Relativistic Heavy-Ion Collider (RHIC) at Brookhaven National Lab (BNL) are measured with ionization profile monitors (IPMs). Each ring has a vertical and horizontal detector. An IPM measures the distribution of electrons produced in the beam line by beam ionization of background gas. These detectors have been developed at BNL in a program that began in 1996. The current detectors are a design that was based on a prototype built in 2007 and used in RHIC from 2007 to 2012. During the 2012 shutdown we refurbished this prototype and installed it into the Alternating-Gradient Synchrotron (AGS). This paper describes the new AGS IPM and shows data from the detector commissioning.

43 PARTICLE ACCELERATORS↗
NASA NTRS1976

Telemetry packetization for improved mission operations

The requirements for mission-operations data management will accelerate sharply when the Space Transportation System (i.e., Space Shuttle) becomes the primary vehicle for research from space. These demands can be satisfied most effectively by providing a higher-level source encoding function within the spaceborne vehicle. An Instrument Telemetry Packet (ITP) concept is described which represents an alternative to the conventional multiplexed telemetry frame approach for acquiring spaceborne instrument data. By providing excellent data-integrity protection at the source and a variable instrument bandwidth capability, this ITP concept represents a significant improvement over present data acquisition procedures. Realignments in the ground telemetry processing functions are described which are intended to take advantage of the ITP concept and to make the data management system more responsive to the scientific investigators.

Greene, E. P.↗
NASA NTRS1993

Next generation initiation techniques

Four-dimensional data assimilation strategies can generally be classified as either current or next generation, depending upon whether they are used operationally or not. Current-generation data-assimilation techniques are those that are presently used routinely in operational-forecasting or research applications. They can be classified into the following categories: intermittent assimilation, Newtonian relaxation, and physical initialization. It should be noted that these techniques are the subject of continued research, and their improvement will parallel the development of next generation techniques described by the other speakers. Next generation assimilation techniques are those that are under development but are not yet used operationally. Most of these procedures are derived from control theory or variational methods and primarily represent continuous assimilation approaches, in which the data and model dynamics are 'fitted' to each other in an optimal way. Another 'next generation' category is the initialization of convective-scale models. Intermittent assimilation systems use an objective analysis to combine all observations within a time window that is centered on the analysis time. Continuous first-generation assimilation systems are usually based on the Newtonian-relaxation or 'nudging' techniques. Physical initialization procedures generally involve the use of standard or nonstandard data to force some physical process in the model during an assimilation period. Under the topic of next-generation assimilation techniques, variational approaches are currently being actively developed. Variational approaches seek to minimize a cost or penalty function which measures a model's fit to observations, background fields and other imposed constraints. Alternatively, the Kalman filter technique, which is also under investigation as a data assimilation procedure for numerical weather prediction, can yield acceptable initial conditions for mesoscale models. The third kind of next-generation technique involves strategies to initialize convective scale (non-hydrostatic) models.

Warner, Tom↗
NASA NTRS2004

Development of Improved Models, Stochasticity, and Frameworks for the MIT Extensible Air Network Simulation

MEANS, the MIT Extensible Air Network Simulation, was created in February of 2001, and has been developed with support from NASA Ames since August of 2001. MEANS is a simulation tool which is designed to maximize fidelity without requiring data of such a low level as to preclude easy examination of alternative scenarios. To this end, MEANS is structured in a modular fashion to allow more detailed components to be brought in when desired, and left out when they would only be an impediment. Traditionally, one of the difficulties with high-fidelity models is that they require a level of detail in their data that is difficult to obtain. For analysis of past scenarios, the required data may not have been collected, or may be considered proprietary and thus difficult for independent researchers to obtain. For hypothetical scenarios, generation of the data is sufficiently difficult to be a task in and of itself. Often, simulations designed by a researcher will model exactly one element of the problem well and in detail, while assuming away other parts of the problem which are not of interest or for which data is not available. While these models are useful for working with the task at hand, they are very often not applicable to future problems. The MEAN Simulation attempts to address these problems by using a modular design which provides components of varying fidelity for each aspect of the simulation. This allows for the most accurate model for which data is available to be used. It also provides for easy analysis of sensitivity to data accuracy. This can be particularly useful in the case where accurate data is available for some subset of the situations that are to be considered. Furthermore, the ability to use the same model while examining effects on different parts of a system reduces the time spent learning the simulation, and provides for easier comparisons between changes to different parts of the system.

Clarke, John-Paul↗