Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Effect of temperature on the electronic instability and the crystalline phase change at low temperature of V3Si type compounds

Equations assuming a Jahn-Teller type effect for the d band electrons in V3Si compounds are given, and the results of free-energy change calculations by using some approximations based on these equations are depicted. The tetragonal structure is converted to cubic as the temperature rises past T sub m which is calculated as 13 K. by the Batterman-Barrett method and is measured to be 20-5 K. Other parameters such as change of C sub p with temperature are predicted better.

Labbe, J.↗

Reduction of the radar cross section of arbitrarily shaped cavity structures

The problem of the reduction of the radar cross section (RCS) of open-ended cavities was studied. The issues investigated were reduction through lossy coating materials on the inner cavity wall and reduction through shaping of the cavity. A method was presented to calculate the RCS of any arbitrarily shaped structure in order to study the shaping problem. The limitations of this method were also addressed. The modal attenuation was studied in a multilayered coated waveguide. It was shown that by employing two layers of coating, it was possible to achieve an increase in both the magnitude of attenuation and the frequency band of effectiveness. The numerical method used in finding the roots of the characteristic equation breaks down when the coating thickness is very lossy and large in terms of wavelength. A new method of computing the RCS of an arbitrary cavity was applied to study the effects of longitudinal bending on RCS reduction. The ray and modal descriptions for the fields in a parallel plate waveguide were compared. To extend the range of validity of the Shooting and Bouncing Ray (SBR) method, the simple ray picture must be modified to account for the beam blurring.

Chou, R.↗

Structural, electronic and optical properties of novel carbonate fluorides ABCO{sub 3}F (A=K, Rb, Cs; B=Ca, Sr)

In the present study, we performed first principles calculations on the electronic and optical properties of layered alkali–alkaline earth carbonate fluorides which attract attention in the domain of nonlinear optics. The calculated lattice parameters and volumes with and without inclusion of van der Waals (vdW) correction methods to standard density functional methods were compared with experiments. We observed that vdW interactions are predominant in RbCaCO{sub 3}F and CsCaCO{sub 3}F as compared with other computed compounds. The calculated bulk modulus from single crystal elastic constants reveals that these materials are all relatively harder than the KH{sub 2}PO{sub 4} (KDP) crystal. We also found that these materials are wide band gap insulators as obtained from Tran–Blaha modified Becke–Johnson potential. The linear optical properties such as dielectric function, refractive indices, birefringence and absorption spectra are presented. Finally, the calculated birefringence values indicate that these crystals could be promising for producing phase matching in the deep ultra-violet region. - Graphical abstract: The co- and anti-parallel alignment of CO{sub 3} groups leads to larger and smaller SHG coefficients in (a) KCaCO{sub 3}F, (b) KSrCO{sub 3}F, (c) RbSrCO{sub 3}F, (d) RbCaCO{sub 3}F, and (e) CsCaCO{sub 3}F. - Highlights: • Effect of van der Waals interactions on structural properties. • Single-crystalline elastic constants and mechanical stability. • Electronic properties. • Linear optical properties. • Comparison of present computed compounds with other well known materials in non-linear optical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optical, and magnetic properties of (Co, Cu)-codoped ZnO films with different Co concentrations

Zn{sub 0.99-x}Co{sub x}Cu{sub 0.01}O films with different Co concentrations from 0% to 20% were fabricated by a sol-gel method. Moderate Co doping is found to improve the surface uniformity and crystal quality of the films, and causes a redshift of the band edge of Zn(Co,Cu) films. X-ray photoelectron spectroscopy reveals that the introduction of Co ions causes the valence state of Cu to change from +2 to +1; while at Co concentrations lower than 10%, the Co exists in the +2 valence state. Strong blue emission at ∼420 and 440 nm are observed, decreasing with increasing Co concentration, but becoming strong again as the concentration is increased to 20%. Enhanced room-temperature ferromagnetism is observed for the (Co, Cu)-codoped ZnO films at Co concentrations lower than 10%. These interesting magnetic properties are explained based on charge transfer, together with the defect-related model for ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption geometry, conformation, and electronic structure of 2H-octaethylporphyrin on Ag(111) and Fe metalation in ultra high vacuum

Due to the growing interest in the ferromagnetic properties of Fe-octaethylporphyrins (Fe-OEP) for applications in spintronics, methods to produce stable Fe-porphyrins with no Cl atoms are highly demanded. Here, we demonstrate the formation of Fe-OEP layers on Ag(111) single crystal by the ultra high vacuum in situ metalation of the free-base 2H-2,3,7,8,12,13,17,18-octaethylporphyrin (2H-OEP) molecules. The metalation proceeds exactly as in the case of 2H-5,10,15,20-tetraphenylporphyrin (2H-TPP) on the same substrate. An extensive surface characterization by means of X-ray photoemission spectroscopy, valence band photoemission, and NEXAFS with synchrotron radiation light provides information on molecular conformation and electronic structure in the monolayer and multilayer cases. We demonstrate that the presence of the ethyl groups affects the tilt of the adsorbed molecules, the conformation of the macrocycle, and the polarization screening in multilayers, but has only a minor effect in the metalation process with respect to 2H-TPP.

36 MATERIALS SCIENCE↗

First-principles study of structural, electronic, vibrational, dielectric and elastic properties of tetragonal Ba₂YTaO₆

We report first-principles study of structural, electronic, vibrational, dielectric, and elastic properties of Ba₂YTaO₆, a pinning material in high temperature superconductors (HTS), by using density functional theory. By using different exchange-correlation potentials, the accuracy of the calculated lattice constants of Ba₂YTaO₆ has been achieved with GGA-RPBE, since many important physical quantities crucially depend on change in volume. We have calculated the electronic band structure dispersion, total and partial density of states to study the band gap origin and found that Ba₂YTaO₆ is an insulator with a direct band gap of 3.50 eV. From Mulliken population and charge density studies, we conclude that Ba₂YTaO₆ have a mixed ionic-covalent character. Moreover, the vibrational properties, born effective charges, and the dielectric permittivity tensor have been calculated using linear response method. Vibrational spectrum determined through our calculations agrees well with the observed Raman spectrum, and allows assignment of symmetry labels to modes. We perform a detailed analysis of the contribution of the various infrared-active modes to the static dielectric constant to explain its anisotropy, while electronic dielectric tensor of Ba₂YTaO₆ is nearly isotropic, and found that static dielectric constant is in good agreement with experimental value. The six independent elastic constants were calculated and found that tetragonal Ba₂YTaO₆ is mechanically stable. Other elastic properties, including bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and elastic anisotropy ratios are also investigated and found that Poisson's ratio and Young's modulus of Ba₂YTaO₆ are similar to that of other pinning materials in HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topotactic synthesis of strontium cobalt oxyhydride thin film with perovskite structure

The substitution of hydride anions (H{sup −}) into transition metal oxides has recently become possible through topotactic reactions or high-pressure synthesis methods. However, the fabrication of oxyhydrides is still difficult because of their inherently less-stable frameworks. In this study, we successfully fabricated perovskite SrCoO{sub x}H{sub y} thin films via the topotactic hydride doping of brownmillerite SrCoO{sub 2.5} epitaxial thin films with CaH{sub 2}. The perovskite-type cation framework was maintained during the topotactic treatment owing to epitaxial stabilization. Structural and chemical analyses accompanied by X-ray absorption spectroscopy measurements revealed that the doped hydride ions form a two-dimensional network of Co-H{sup −}-Co bonds, in contrast to other reported perovskite oxyhydrides, SrMO{sub 3−x}H{sub x} (M = Cr, Ti, V). The SrCoO{sub x}H{sub y} thin film exhibited insulating behavior and had a direct band gap of 2.1 eV. Thus, topotactic hydride doping of transition-metal-oxide thin films on suitable substrates is a promising method for the synthesis of new transition metal oxyhydrides.

36 MATERIALS SCIENCE↗

Optoelectronically probing the density of nanowire surface trap states to the single state limit

Surface trap states play a dominant role in the optoelectronic properties of nanoscale devices. Understanding the surface trap states allows us to properly engineer the device surfaces for better performance. But characterization of surface trap states at nanoscale has been a formidable challenge using the traditional capacitive techniques. Here, we demonstrate a simple but powerful optoelectronic method to probe the density of nanowire surface trap states to the single state limit. In this method, we choose to tune the quasi-Fermi level across the bandgap of a silicon nanowire photoconductor, allowing for capture and emission of photogenerated charge carriers by surface trap states. The experimental data show that the energy density of nanowire surface trap states is in a range from 10{sup 9 }cm{sup −2}/eV at deep levels to 10{sup 12 }cm{sup −2}/eV near the conduction band edge. This optoelectronic method allows us to conveniently probe trap states of ultra-scaled nano/quantum devices at extremely high precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum sensing effect of electron tunneling in DQD/analyte complex

We investigate electron tunneling between quantum dots and molecules to propose a quantum sensor. This sensor consists of double quantum dots (DQD) with energy levels specifically tailored to mirror those of the target analyte. By analyzing the spectral distribution of electron localizations in the DQD system, we can delineate the analyte’s spectrum and deduce its composition by comparing it with a reference sample. To understand electron tunneling dynamics within the DQD/analyte complex, we performed three-dimensional computational modeling applying the effective potential approach to the InAs/GaAs heterostructure. In this modeling, we mimicked the analyte spectrum by utilizing a quantum well characterized by a quasi-discrete spectrum. Our calculations reveal the inherent potential of utilizing this method as a highly sensitive and selective sensor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, electronic and optical properties of armchair silicon nanotube of chirality (6,6)

First principle calculations based on density functional theory have been used to study the structural, electronic and optical properties of infinite armchair (6,6) silicon nanotube. The cohesive energy of the studied SiNT has been found to be 4.45 eV/atom in comparison to cohesive energy 5.22 eV/atom of its bulk counterpart. Contrary to some published results in literature, the SiNT with (6,6) chirality does not appear to have zero band gap semiconductor since it shows band gap of 0.18 eV. Also the absorption egde of SiNT shifts towards the lower energy as compared to bulk and lies in the infrared region, as a consequence of decrease in dimensionality.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Nature of Electron Lone Pairs in BiVO4

The electronic structure of BiVO{sub 4} has been studied by x-ray photoelectron, x-ray absorption, and x-ray emission spectroscopies, in comparison with density functional theory calculations. Our results confirm both the direct band gap of 2.48 eV and that the Bi 6s electrons hybridize with O 2p to form antibonding 'lone pair' states at the top of the valence band. The results highlight the suitability of combining s{sup 2} and d{sup 0} cations to produce photoactive ternary oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A First Principle Study of Half-Heusler Compounds CrTiZ (Z = P, As)

Half-Heusler compounds CrTiZ (Z = P, As) are studied in the framework of Density Functional Theory (DFT). Structural, mechanical, elastic, electronic, magnetic, and optical properties are derived using first principles. The full-potential linearized augmented plane wave (FP-LAPW) method is used for these investigations as implemented in the WIEN2k simulation package. We have found that the equilibrium lattice parameters are in the range 5.5–5.9 Å. Small band gaps of 0.5–0.6 eV in the minority spin-down states are observed. On the other hand, in the majority spin-up states, there is no band gap. Hence, the compounds are of half-metallic nature, having 100 % polarization at Fermi level. Comparatively, a higher total magnetic moment of ∼ 3μ{sub B} is found for both the compounds. Furthermore, optical properties are derived using dielectric function. Reflectivity, refractive index, conductivity and absorption coefficient are calculated. It is revealed from the imaginary part of the dielectric function that the compounds are optically metallic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Doping induced magnetism in Co-ZnS nanoparticles

Zn{sub 1-x}Co{sub x}S nanoparticles with x=0, 0.1, 0.2, and 0.3 were synthesized by the co-precipitation method using thiophenol as capping agent. The effect of Co doping on the structural, optical and magnetic properties are investigated. The X-ray diffraction patterns show single phase with cubic structure and the images of Transmission Electron Microscopy indicate an average particle size of 39 nm. Significant blue shift in the optical absorbing band edge was observed with increasing Co doping. In the Co doped samples, room-temperature (RT) magnetic hysteresis is observed and the magnetization reduces with increasing Co content. However, these samples show paramagnetic resonance instead of ferromagnetic resonance at both 300 and 80 K, suggesting that the origin of RT magnetization in these Zn{sub 1-x}Co{sub x}S nanoparticles involves with the frustration of antiferromagnetic interactions. - Graphical abstract: Figure shows the magnetization data of Zn{sub 1-x}Co{sub x}S (0.1<=x<=0.3) nanoparticles annealed at 573 K/2 h in vacuum and measured at 300 K. This interesting feature of systematic reduction in magnetization may be due to introduction of antiferromagnetic ordering with increasing 'Co' concentration which may be due to competition between the antiferromagnetic and ferromagnetic ordering within the sample. One could also observe the exchange bias effect which is an interface interaction observed in a ferromagnetic-antiferromagnetic mixture. The exchange bias field (loop shift) towards negative field was around 63 Oe for the Zn{sub 1-x}Co{sub x}S (0.1<=x<=0.3) nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of physical properties of cobalt oxide (Co{sub 3}O{sub 4}) nanocrystals

Cobalt oxide nanocrystals of size 10-15 nm have been prepared by a simple co-precipitation method. The structural investigations have been performed with X-ray diffraction and Transmission Electron Microscopy. Specific surface area of the nanocrystals is 77.5 x 10{sup 4} cm{sup 2}/g which have been calculated by X-ray diffraction data. Optical properties are discussed with UV/visible spectroscopy which shows the multiple band gap energies 2.28 eV (O{sup -II} {yields} Co{sup II}) and 1.57 eV (O{sup -II} {yields} Co{sup III}) which suggest the possibility of degeneracy of the valence band. The magnetic behavior is investigated using Vibrating Sample Magnetometer. The Co{sub 3}O{sub 4} nanocrystals possess paramagnetic character at room temperature.

36 MATERIALS SCIENCE↗

Influence of rare earth ion (Y{sup 3+}) on the magnetic and dc electrical properties of high density nanocrystalline Mg-Cd ferrites

Graphical abstract: Display Omitted Highlights: ► XRD confirm biphasic nature. ► Grain and crystallite are reduced as compared to ceramic method. ► The resistivity and magnetization increases with Y{sup 3+} addition in Mg-Cd ferrites. ► Coercivity and saturation magnetization shows size dependent behavior. -- Abstract: The samples having general formula Mg{sub 1−x}Cd{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.2, 0.4, 0.6, 0.8 and 1) with 5% Y{sup 3+} addition were prepared by oxalate co-precipitation technique. The characterization was carried by XRD, SEM and FTIR techniques. The XRD confirms the cubic spinel structure with orthoferrite (YFe{sub 2}O{sub 3}) secondary phase. Average crystallite size and grain size lies in the range (28.86–32.66 nm and 0.37–0.69 μm). The grain size is calculated by linear intercept method and lies in the range of 0.37–0.69 μm. The FT-IR shows two absorption bands in the frequency range of 350–800 cm{sup −1}. The addition of Y{sup 3+} for Fe{sup 3+} forms a secondary phase on the grain boundaries and increases the saturation magnetization with respect to that of pure Mg-Cd ferrites. The saturation magnetization, magnetic moment and coercive field is found to increase with cadmium content up to x = 0.4, obeying Neel's two sublattice model and decrease thereafter showing existence of non-collinear spin interaction. The saturation magnetization and coercivity shows size dependent behavior. Y–K type ordering is present in all samples except x = 1. The DC electrical resistivity increases while the Curie temperature (T{sub c}) decreases, with increase in cadmium content. The DC resistivity of Y{sup 3+} added Mg-Cd ferrite is higher than that reported for pure samples and for ceramic method. Activation energy in paramagnetic region is higher than that in ferromagnetic region.

36 MATERIALS SCIENCE↗

Study on the synthesis and formation mechanism of Cu{sub 2}ZnSnS{sub 4} particles by microwave irradiation

Graphical abstract: - Highlights: • Cu{sub 2}ZnSnS{sub 4} microparticles were fabricated by low-cost chemical method. • The ball cactus-like shaped microparticles are with a diameter about 250 nm. • The optical band energy of Cu{sub 2}ZnSnS{sub 4} microparticles is obtained to be about 1.5 eV. • The CuS nuclei firstly form, and serve as the growth point for Cu{sub 2}ZnSnS{sub 4}. - Abstract: Cu{sub 2}ZnSnS{sub 4} (CZTS) particles were successfully synthesized by microwave assisted solvothermal method. The structure, shape, composition, and optical properties of these particles were investigated with X-ray diffraction, Raman spectroscopy, scanning electron microscopy, energy dispersive spectrometer, and UV–vis-NIR spectroscopy. The results show that the as-prepared particles had single phase, stoichiometric composition, and a ball cactus-like shape with a diameter about 250 nm, when reaction time is 10 min. The formation mechanism of the CZTS particles was investigated by evaluation of samples prepared with different reaction time. According to the proposed growth mechanism of CZTS particles, the copper sulfide nuclei firstly forms, and serves as the starting point for the nucleation and growth of CZTS.

36 MATERIALS SCIENCE↗

First-principles predicted low-energy structures of NaSc(BH{sub 4}){sub 4}

According to previous interpretations of experimental data, sodium-scandium double-cation borohydride NaSc(BH{sub 4}){sub 4} crystallizes in the crystallographic space group Cmcm where each sodium (scandium) atom is surrounded by six scandium (sodium) atoms. A careful investigation of this phase based on ab initio calculations indicates that the structure is dynamically unstable and gives rise to an energetically and dynamically more favorable phase with C222{sub 1} symmetry and nearly identical x-ray diffraction pattern. By additionally performing extensive structural searches with the minima-hopping method we discover a class of new low-energy structures exhibiting a novel structural motif in which each sodium (scandium) atom is surrounded by four scandium (sodium) atoms arranged at the corners of either a rectangle with nearly equal sides or a tetrahedron. These new phases are all predicted to be insulators with band gaps of 7.9–8.2 eV. Finally, we estimate the influence of these structures on the hydrogen-storage performance of NaSc(BH{sub 4}){sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of fuel on phase formation of ZnFe{sub 2}O{sub 4} prepared by self-propagated combustion route

Zinc iron oxide (ZnFe{sub 2}O{sub 4}) nanoparticles were prepared by self-propagated combustion route.The fuel plays a major role on the formation of structure and particle size. Here three different fuels like alanine, glycine and proline were used to synthesis the zinc iron oxide nanoparticle. Influence of combustion nature through the fuel, the phase formation, particle size, band gap and surface morphology has been modified. The prepared powder was characterized by powder X-ray diffraction method (PXRD), field-emission scanning electron microscopy (FE-SEM) and the composition of the material was analysed by X-ray energy dispersive spectroscopy (EDAX).The elemental mapping was confirmed the uniform distribution of Zn, Fe and O elements in the prepared material of ZnFe{sub 2}O{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗