Search NASA⌕ Search

SEARCH · Search NASA

Results for “Convolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Mechanical Properties and Chemical Reactivity of Li x SiO y Thin Films

Silicon (Si) is a commonly studied candidate material for next-generation anodes in Li-ion batteries. A native oxide SiO 2 on Si is often inevitable. However, it is not clear if this layer has a positive or negative effect on the battery performance. This understanding is complicated by the lack of knowledge about the physical properties of the SiO 2 lithiation products and by the convolution of chemical and electrochemical effects during the anode lithiation process. In this study, Li x SiO y thin films as model materials for lithiated SiO 2 were deposited by magnetron sputtering at ambient temperature, with the goal of (1) decoupling chemical reactivity from electrochemical reactivity and (2) evaluating the physical and electrochemical properties of Li x SiO y . X-ray photoemission spectroscopy analysis of the deposited thin films demonstrate that a composition close to previous experimental reports of lithiated native SiO 2 can be achieved through sputtering. Our density functional theory calculations also confirm that the possible phases formed by lithiating SiO 2 are very close to the measured film compositions. Scanning probe microscopy measurements show that the mechanical properties of the film are strongly dependent on lithium concentration, with a ductile behavior at a higher Li content and a brittle behavior at a lower Li content. The chemical reactivity of the thin films was investigated by measuring the AC impedance evolution, suggesting that Li x SiO y continuously reacts with the electrolyte, in part because of the high electronic conductivity of the film determined from solid-state impedance measurements. The electrochemical cycling data of the sputter-deposited Li x SiO y /Si films also suggest that Li x SiO y is not beneficial in stabilizing the Si anode surface during battery operation, despite its favorable mechanical properties.

14 SOLAR ENERGY↗

Anions in Corrosion: Influence of Polymer Electrolytes on the Interfacial Ion Transfer Kinetics of Cu at Au(111) Surfaces

The corrosion kinetics of metals in the presence of polymer electrolytes—which are often used in devices for the electrochemical production of hydrogen, hydrocarbons, and alcohols—is convoluted by transport and ill-defined reactive interfaces which mask the fundamental reaction kinetics. Underpotential-deposited monolayers of Cu at Au(111) surfaces provide a structurally welldefined active site for interfacial ion transfer, with a fixed number of sites available for adsorption. Here, we investigate the adsorption behavior of Cu at Au(111) surfaces across a series of sulfate and sulfonate electrolytes, to understand how anion structure influences the kinetics of elementary interfacial ion-transfer reactions. The influence of anion structure is most significant at high adsorbate coverage, with similar adsorption isotherms and kinetics observed for all three molecular sulfates and sulfonates. In contrast, a suspended perfluorosulfonic acid ionomer reduced both the equilibrium coverage of Cu as well as the standard exchange rate at Au(111) at low coverages of Cu. These results suggest that electrocatalyst corrosion is inhibited for metal nanoparticles supported at polymer electrolytes due to changes in adsorbate coverage as well as suppressed kinetics for interfacial ion transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Protocols for Studying Organic Non-aqueous Redox Flow Batteries

We report that Redox flow batteries (RFBs) are promising devices for grid-scale energy storage due to the decoupling of power and energy, which can be independently scaled by the electrode area and storage tank size, respectively. To date, only aqueous RFBs, such as the vanadium RFB, have been implemented commercially. Nevertheless, the limited energy densities and high-cost materials may preclude their wider market penetration. Organic non-aqueous redox-flow batteries (O-NRFBs), which utilize redox-active organic molecules (ROMs), have been offered as an attractive alternative. Many possible advantages include the use of earth-abundant elements (C, H, N, O, S, F), wherein the ROMs can be prepared from low-cost and sustainable materials. Additionally, a large variety of electroactive moieties are accessible as building blocks, providing a synthetic platform to tune the properties of ROMs through rational design. As a consequence, the development of novel ROMs has attracted researchers with diverse backgrounds, prompting remarkable innovations in the past decade. However, consistency in experimental protocols (e.g., electrochemical methods, cycling stability, experimental conditions) has not coincided with this uptick in research, leading to sometimes ambiguous and incomparable results. This is further convoluted by the complexity innate to battery development, such as cell design, detection, and characterization of reactions and active components. The O-NRFB application imposes stringent requirements on the physical or/and chemical processes involved in electrochemical cycling. Yet such considerations are often overlooked. Further, while quantum mechanical calculations provide a convenient tool for evaluating and selecting ROM candidates, this simulation is not always performed. Thus, in this Energy Focus, we detail a means to standardize experimental protocols for studies of O-NRFBs and suggest practices to facilitate fundamental understanding and development of ROMs.

25 ENERGY STORAGE↗

Probing Electron Beam Induced Transformations on a Single-Defect Level via Automated Scanning Transmission Electron Microscopy

A robust approach for real-time analysis of the scanning transmission electron microscopy (STEM) data streams, based on ensemble learning and iterative training (ELIT) of deep convolutional neural networks, is implemented on an operational microscope, enabling the exploration of the dynamics of specific atomic configurations under electron beam irradiation via an automated experiment in STEM. Combined with beam control, this approach allows studying beam effects on selected atomic groups and chemical bonds in a fully automated mode. Here, in this study, we demonstrate atomically precise engineering of single vacancy lines in transition metal dichalcogenides and the creation and identification of topological defects in graphene. The ELIT-based approach facilitates direct on-the-fly analysis of the STEM data and engenders real-time feedback schemes for probing electron beam chemistry, atomic manipulation, and atom by atom assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infrared Signatures for Phase Identification in Hafnium Oxide Thin Films

Phase identification in HfO 2 -based thin films is a prerequisite to understanding the mechanisms stabilizing the ferroelectric phase in these materials, which hold great promise in next-generation non-volatile memory and computing technology. While grazing-incidence X-ray diffraction is commonly employed for this purpose, it has difficulty unambiguously differentiating between the ferroelectric phase and other metastable phases that may exist due to similarities in the d-spacings, their low intensities, and the overlapping of reflections. Infrared signatures provide an alternative route. However, their use in phase identification remains limited because phase control has overwhelmingly been accomplished via substituents, thereby convoluting infrared signatures between the substituent and the phase changes they induce. Herein, we report the infrared optical responses of three undoped hafnium oxide films where annealing conditions have been used to create films consisting primarily of the ferroelectric polar orthorhombic Pca2 1 , antipolar orthorhombic Pbca, and monoclinic P2 1 /c phases, as was confirmed via transmission electron microscopy (TEM), UVvisible optical properties, and electrical property measurements. Vibrational signatures acquired from synchrotron nano-Fourier transform infrared spectroscopy (nano-FTIR) are shown to be capable of differentiating between the phases in a non-destructive, rapid, and nanoscale manner. The utility of nano-FTIR is illustrated for a film exhibiting an antiferroelectric polarization response. In this sample, it is proven that this behavior results from the Pbca phase rather than the often-cited tetragonal phase. Here, by demonstrating that IRspectroscopy can unambiguously distinguish phases in this material, this work establishes a tool needed to isolate the factors dictating ferroelectric phase stability in HfO 2 -based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperspectral Detection of the Fluorescence Shift between Chirality-Sorted Empty and Water-Filled Single-Wall Carbon Nanotube Enantiomers

Single-wall carbon nanotubes (SWCNTs) have extraordinary electronic and optical properties that depend strongly on their exact chiral structure and their interaction with their inner and outer environment. The fluorescence (PL) of semiconducting SWCNTs, for instance, will shift depending on the molecules with which the SWCNT’s hollow core is filled. These interaction-induced shifts are challenging to resolve on the ensemble level in samples containing a mixture of different filling contents due to the relatively large inhomogeneous line width of the ensemble SWCNT PL compared to the size of these shifts. To circumvent this inhomogeneous broadening, single-tube spectroscopy and hyperspectral imaging are often applied, which until now required time-consuming statistical studies. Here, we present hyperspectral PL microscopy combined with automated SWCNT segmenting based on either principal component analysis or a convolutional neural network, capable of both spatially and spectrally resolving the PL along the length of many individual SWCNTs at the same time and automatically fitting peak positions and line widths of individual SWCNTs. The methodology is demonstrated by accurately determining the emission shifts and line widths of thousands of left- and right-handed empty and water-filled SWCNTs coated with a chiral surfactant, resulting in four statistical distributions which cannot be resolved in ensemble spectroscopy of unsorted samples. The results demonstrate a robust method to quickly probe ensemble properties with single-enantiomer spectral resolution. Moreover, it promises to be an absolute quantitative method to characterize the relative abundances of SWCNTs with different handedness or filling content in macroscopic samples, simply by counting individual species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Array-Based Machine Learning for Functional Group Detection in Electron Ionization Mass Spectrometry

Mass spectrometry is a ubiquitous technique capable of complex chemical analysis. The fragmentation patterns that appear in mass spectrometry are an excellent target for artificial intelligence methods to automate and expedite the analysis of data to identify targets such as functional groups. To develop this approach, we trained models on electron ionization (a reproducible hard fragmentation technique) mass spectra so that not only the final model accuracies but also the reasoning behind model assignments could be evaluated. The convolutional neural network (CNN) models were trained on 2D images of the spectra using transfer learning of Inception V3, and the logistic regression models were trained using array-based data and Scikit Learn implementation in Python. Our training dataset consisted of 21,166 mass spectra from the United States’ National Institute of Standards and Technology (NIST) Webbook. The data was used to train models to identify functional groups, both specific (e.g., amines, esters) and generalized classifications (aromatics, oxygen-containing functional groups, and nitrogen-containing functional groups). We found that the highest final accuracies on identifying new data were observed using logistic regression rather than transfer learning on CNN models. It was also determined that the mass range most beneficial for functional group analysis is 0–100 m/z. We also found success in correctly identifying functional groups of example molecules selected from both the NIST database and experimental data. Beyond functional group analysis, we also have developed a methodology to identify impactful fragments for the accurate detection of the models’ targets. The results demonstrate a potential pathway for analyzing and screening substantial amounts of mass spectral data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peak2Patch: High-Fidelity Functional Group Identification through Attention-Based Fusion of Infrared and Mass Spectra

Identifying molecular structure based on spectroscopic readings is a key task in a variety of chemical and biological applications. Common spectroscopy techniques, such as Infrared (IR) Spectroscopy and Mass Spectrometry (MS), provide detailed information on the structure of molecular compounds but nonetheless require expert-level knowledge to decode. Machine learning has emerged as a potential solution for automating structure prediction from chemical spectra; however, current approaches generally focus on single sensor modalities, neglecting to leverage the complementary information contained within differing spectra. In this paper, we introduce Peak2Patch, a novel approach to fusion-enhanced prediction of functional groups from IR and mass spectra. First, we perform a detailed comparison of backbone networks for encoding both sparse mass spectra and dense IR spectra and demonstrate the superior performance of transformer neural networks over current state-of-the-art convolutional neural networks. Second, we evaluate three broad categories of fusion: early (raw feature), middle (deep feature), and late (decision) fusion, demonstrating the potential of a deep feature fusion-based approach. Lastly, we present Peak2Patch, our attention-based fusion scheme, which leverages cross-attention to mix features between encoded tokens of the two modalities. We validate our approach on a publicly available multimodal spectroscopic data set of 790k simulated molecules, demonstrating a large improvement in functional group prediction over both the previous state-of-the-art and our own strong single-modal baselines.

Jacobson, Philip [Sandia National Laboratories (SN↗

Evaluating the Effects of Anode Porous Transport Layer on the Performance and Durability of Anion Exchange Membrane Electrolyzers

As anion exchange membrane systems have emerged as a competitive low temperature electrolysis technology, research has expanded to other components and device integration. In this study, nickel (Ni) and stainless steel (SS)-based porous transport layers (PTLs) are investigated in membrane electrode assemblies (MEAs). Compared to MEAs using Ni, the SS PTL shows higher performance due to less kinetics and residual loss and possibly due to a combination of iron mobility improving oxygen evolution reactivity and electron conduction pathways, as well as higher porosity increasing site access. Voltage decay rates of approximately 144 and 115 μV/h, respectively, for the Ni and SS PTLs are found, although the long-term durability and lifetime implications are convoluted. Voltage breakdown analysis confirms that both PTLs saw significant increases in residual loss possibly due to catalyst/PTL property changes that affected electronic, ionic, and mass transport pathways. For the Ni PTL, a higher proportion of the losses were due to cell kinetics; comparatively, more of the SS PTL losses were due to increases in the high frequency resistance. The experimental findings presented here provide insights on the impact of the PTL materials and their properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale and Element-Specific Lattice Temperature Measurements Using Core-Loss Electron Energy-Loss Spectroscopy

Measuring nanoscale local temperatures, particularly in vertically integrated and multicomponent systems, remains challenging. Spectroscopic techniques like X-ray absorption and core-loss electron energy-loss spectroscopy (EELS) are sensitive to lattice temperature, but understanding thermal effects is nontrivial. This work explores the potential for nanoscale and element-specific core-loss thermometry by comparing the Si L2,3 edge’s temperature- dependent redshift against plasmon energy expansion thermometry (PEET) in a scanning TEM. Using density functional theory (DFT), time-dependent DFT, and the Bethe−Salpeter equation, we ab initio model both the Si L 2,3 and plasmon redshift. We find that the core-loss redshift occurs due to bandgap reduction from electron−phonon renormalization. Our results indicate that despite lower core-loss signal intensity compared to plasmon features, core-loss thermometry has key advantages and can be more accurate through standard spectral denoising. Specifically, we show that the Varshni equation easily interprets the core-loss redshift for semiconductors, which avoids plasmon spectral convolution for PEET in complex junctions and interfaces. We also find that core-loss thermometry is more accurate than PEET at modeling thermal lattice expansion in semiconductors, unless the specimen’s temperature-dependent dielectric properties are fully characterized. Furthermore, core-loss thermometry has the potential to measure nanoscale heating in multicomponent materials and stacked interfaces with elemental specificity at length scales smaller than the plasmon’s wave function.

Bethe–Salpeter equation↗

Online Characterization of Mixed Plastic Waste Using Machine Learning and Mid-Infrared Spectroscopy

To recycle the mixed plastic wastes (MPW), it is important to obtain the compositional information online in real time. We present a sensing framework based on a convolutional neural network (CNN) and mid-infrared spectroscopy (MIR) for the rapid and accurate characterization of MPW. The MPW samples are placed on a moving platform to mimic the industrial environment. The MIR spectra are collected at the rate of 100 Hz, and the proposed CNN architecture can reach an overall prediction accuracy close to 100%. Therefore, the proposed method paves the way toward the online MPW characterization in industrial applications where high throughput is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leveraging Natural Language Processing and Generative Models in Molecular Chemistry: Property Prediction and Novel Compound Generation

The accurate prediction of molecular properties is important for the rational design and the advancement of green chemistry and sustainable materials research. However, the predictive power of traditional computational chemistry methods is limited due to computational restrictions. Here, in this study, we examine an alternative approach to the accurate prediction of properties of organic compounds: natural language processing (NLP)-based molecular embedding. Using viscosity, partition coefficient (log P), and enthalpy of vaporization as test properties through a survey of comprehensive datasets comprising 5695 data points for viscosity, 25 870 data points for log P, and 2296 data points for enthalpy of vaporization. These are important properties for the design of greener, safer, and sustainable chemical processes. Models were trained using NLP methods such as Mol2vec and fine-tuned ChemBERTa, and results were compared with traditional input featurization techniques such as Morgan fingerprints and quantum chemistry derived sigma profiles and DFT features. Among the various machine learning models, Mol2vec demonstrated superior predictive capabilities, achieving the highest correlation coefficient (R 2 = 0.945) and lowest RMSE (0.106 mPa s) for viscosity, as well as high accuracy for log P and enthalpy of vaporization predictions. These findings establish the Mol2vec featurization technique, graph-convolutional neural networks (GCNN), and fine-tuned ChemBERTa model as powerful tools for predictive modeling of organic compounds properties, offering a significant improvement over previously used featurization techniques and opening up strategies for very-high-throughput computational screening. Finally, we integrated ML models with hybrid language-model-based generative adversarial networks (LM-GAN) to generate novel molecular sequences with desirable properties for different research applications. The ability to computationally design solvents with lower viscosity, lower log P, and lower enthalpy of vaporization offers a data-driven route to accelerating the discovery of sustainable alternatives to traditionally toxic solvents.

ChemBERTa↗

An Adaptive Fast Multipole Boundary Element Method for Poisson-Boltzmann Electrostatics

The numerical solution of the Poisson Boltzmann (PB) equation is a useful but a computationally demanding tool for studying electrostatic solvation effects in chemical and biomolecular systems. Recently, we have described a boundary integral equation-based PB solver accelerated by a new version of the fast multipole method (FMM). The overall algorithm shows an order N complexity in both the computational cost and memory usage. Here, we present an updated version of the solver by using an adaptive FMM for accelerating the convolution type matrix-vector multiplications. The adaptive algorithm, when compared to our previous nonadaptive one, not only significantly improves the performance of the overall memory usage but also remarkably speeds the calculation because of an improved load balancing between the local- and far-field calculations. We have also implemented a node-patch discretization scheme that leads to a reduction of unknowns by a factor of 2 relative to the constant element method without sacrificing accuracy. As a result of these improvements, the new solver makes the PB calculation truly feasible for large-scale biomolecular systems such as a 30S ribosome molecule even on a typical 2008 desktop computer.

97 MATHEMATICS AND COMPUTING↗

Superresolved Motions of Single Molecular Catalysts during Polymerization Show Wide Distributions

The motion of single molecular ruthenium catalysts during and after single turnover events of ring-opening metathesis polymerization is imaged through single-molecule superresolution tracking with a positional accuracy of ±32 nm. This tracking is achieved through the real-time incorporation of spectrally tagged monomer units into active polymer chain ends during living polymerization; thus, by design, only active-catalyst motion is detected and imaged, without convolution by inactive catalysts. The catalysts show diverse individualistic diffusive behaviors with respect to time that persist for up to 20 s. Catalysts occupy three mobility populations: quasi-stationary (23%), intermediate (53%, 65 nm), and large (24%, 145 nm) step sizes. Differences in catalyst mobility populations also exist between individual aggregates (p < 0.001). Such differential motion indicates widely different local catalyst microenvironments during the catalytic turnover. These mobility differences are uniquely observable through single-catalyst microscopy and are not measurable through traditional ensemble analytical techniques for characterizing the behavior of molecular catalysts, such as nuclear magnetic resonance spectroscopy. The measured distributions of active molecular catalyst motions would not be readily predictable through modeling or first-principles, and the range likely impacts individual catalyst turnover rate and selectivity. This range plausibly contributes to property distributions observable in bulk polymers, such as molecular weight polydispersity (e.g., 1.9 in this system), leading to a revised understanding of the mechanistic, microscale origins of macroscale polymer properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water Clustering Modulates Activity and Enables Hydrogenated Product Formation during Carbon Monoxide Electroreduction in Aprotic Media

Water solvation plays a critical role in a wide range of electrochemical transformations, but its role is often convoluted since water is typically used as both a solvent and a proton source. Here, we experimentally control water speciation and activity using aprotic solvent media during the carbon monoxide reduction reaction (CORR). Remarkably, we show that aprotic solvents that support microheterogeneous water–water clusters lead to significant amounts of CORR products (methane and ethylene) with a maximum ethylene Faradaic efficiency of 22% in acetonitrile (χ H 2 O = 0.2). In contrast, microhomogeneous systems–where water integrates into the solvents’ intermolecular binding network and has lower activity–primarily support the undesired hydrogen evolution reaction (HER). As a result, insights gained expand our understanding of water activity and nonaqueous electrolyte design for other important transformation reactions beyond CO reduction, such as CO2RR and HER.

Electrolytes↗

Influence of Adsorption Site and Wavelength on the Photodesorption of NO from the (Fe,Cr) 3 O 4 (111) Mixed Oxide Surface

The photochemical properties of nitric oxide on a mixed oxide single crystal surface was examined in ultrahigh vacuum (UHV) using temperature programmed desorption (TPD), photon stimulated desorption (PSD) and low energy electron diffraction (LEED). The mixed oxide was a 75% Fe and 25% Cr corundum (0001) oxide film prepared on an α-Al2O3(0001) crystal, however its surface became terminated with a magnetite-like (111) structure after sputter/anneal cleaning, leading to a surface designated of (Fe,Cr)3O4(111). TPD of NO from the (Fe,Cr)3O4(111) surface revealed three chemisorbed states at 220, ~315 and 370 K assigned to NO binding at Fe3+, Cr3+ and Fe2+ sites, respectively. No significant thermal chemistry of NO was detected. NO photodesorption, the primary photochemical pathway in UHV, was sensitive to the adsorption site, with rates at the three adsorption sites following the trend: Fe3+ > Fe2+ > Cr3+. Multiexponential rate behavior seen in the overall NO PSD spectra was linked directly to site heterogeneity being manifested as a convolution of the individual NO photodesorption rates at the three types of surface sites. The photodesorption rate with UV light (365 nm) was ~10 times greater than that in the visible, but the per-photon rates across the visible spectrum (from 460 to 630 nm) were independent of the wavelength, which is suggestive of localized photon absorption at the adsorption site. Results in this study demonstrate that the adsorption site plays a critical role in determining photochemical rates on complex oxide surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multi-program national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

36 MATERIALS SCIENCE↗

Simulation of chemical reaction via particle tracking: Diffusion‐limited versus thermodynamic rate‐limited regimes

Chemical reactions may be simulated without regard to local concentrations by applying simple probabilistic rules of particle interaction and combination. The forward reaction A + B -> C is coded by calculating the probability that any A and B particles will occupy the same volume over some time interval. This becomes a convolution of the location densities of the two particles. The backward reaction is a simple exponential decay of C particles into A and B particles. When the mixing of reactants is not a limiting process, the classical thermodynamic reaction rates are reproduced. When low mixing (as by diffusion) limits the reaction probabilities, the reaction rates drop significantly, including the rate of approach to global equilibrium. At long enough times, the law of mass action is reproduced exactly in the mean, with some irreducible deviation in the local equilibrium saturations (the equilibrium constant divided by the mass action expression) away from unity. The saturation variability is not sensitive to numerical parameters but depends strongly on how far from equilibrium the system is initiated. This is simply due to a relative paucity of particles of some species as the reaction moves far to one side or the other.

58 GEOSCIENCES↗