Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Enhancing the quantum efficiency of InGaN yellow-green light-emitting diodes by growth interruption

We studied the effect of multiple interruptions during the quantum well growth on emission-efficiency enhancement of InGaN-based yellow-green light emitting diodes on c-plane sapphire substrate. The output power and dominant wavelength at 20 mA are 0.24 mW and 556.3 nm. High resolution x-ray diffraction, photoluminescence, and electroluminescence measurements demonstrate that efficiency enhancement could be partially attributed to crystal quality improvement of the active region resulted from reduced In clusters and relevant defects on the surface of InGaN layer by introducing interruptions. The less tilted energy band in the quantum well is also caused by the decrease of In-content gradient along c-axis resulted from In segregation during the interruptions, which increases spatial overlap of electron-hole wavefunction and thus the internal quantum efficiency. The latter also leads to smaller blueshift of dominant wavelength with current increasing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient charge carrier injection into sub-250 nm AlGaN multiple quantum well light emitting diodes

The design and Mg-doping profile of AlN/Al{sub 0.7}Ga{sub 0.3}N electron blocking heterostructures (EBH) for AlGaN multiple quantum well (MQW) light emitting diodes (LEDs) emitting below 250 nm was investigated. By inserting an AlN electron blocking layer (EBL) into the EBH, we were able to increase the quantum well emission power and significantly reduce long wavelength parasitic luminescence. Furthermore, electron leakage was suppressed by optimizing the thickness of the AlN EBL while still maintaining sufficient hole injection. Ultraviolet (UV)-C LEDs with very low parasitic luminescence (7% of total emission power) and external quantum efficiencies of 0.19% at 246 nm have been realized. This concept was applied to AlGaN MQW LEDs emitting between 235 nm and 263 nm with external quantum efficiencies ranging from 0.002% to 0.93%. After processing, we were able to demonstrate an UV-C LED emitting at 234 nm with 14.5 μW integrated optical output power and an external quantum efficiency of 0.012% at 18.2 A/cm{sup 2}.

36 MATERIALS SCIENCE↗

Influence of optical polarization on the improvement of light extraction efficiency from reflective scattering structures in AlGaN ultraviolet light-emitting diodes

The improvement in light extraction efficiency from reflective scattering structures in AlGaN ultraviolet light-emitting diodes (UVLEDs) emitting at ∼270 nm is shown to be influenced by optical polarization. Three UVLEDs with different reflective scattering structures are investigated and compared to standard UVLEDs without scattering structures. The optical polarization and therefore the direction of light propagation within the various UVLEDs are altered by changes in the quantum well (QW) thickness. The improvement in light extraction efficiency of the UVLEDs with reflective scattering structures increases, compared to the UVLEDs without scattering structures, as the fraction of emitted light propagating parallel to the QW plane increases. Additionally, the light extraction efficiency increases as the average distance to the reflective scattering structures decreases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced ultraviolet electroluminescence and spectral narrowing from ZnO quantum dots/GaN heterojunction diodes by using high-k HfO{sub 2} electron blocking layer

We demonstrated the capability of realizing enhanced ZnO-related UV emissions by using the low-cost and solution-processable ZnO quantum dots (QDs) with the help of a high-k HfO{sub 2} electron blocking layer (EBL) for the ZnO QDs/p-GaN light-emitting diodes (LEDs). Full-width at half maximum of the LED devices was greatly decreased from ∼110 to ∼54 nm, and recombinations related to nonradiative centers were significantly suppressed with inserting HfO{sub 2} EBL. The electroluminescence of the ZnO QDs/HfO{sub 2}/p-GaN LEDs demonstrated an interesting spectral narrowing effect with increasing HfO{sub 2} thickness. The Gaussian fitting revealed that the great enhancement of the Zn{sub i}-related emission at ∼414 nm whereas the deep suppression of the interfacial recombination at ∼477 nm should be the main reason for the spectral narrowing effect.

36 MATERIALS SCIENCE↗

Influence of InGaN sub-quantum-well on performance of InAlN/GaN/InAlN resonant tunneling diodes

The resonant tunneling mechanism of the GaN based resonant tunneling diode (RTD) with an InGaN sub-quantum-well has been investigated by means of numerical simulation. At resonant-state, Electrons in the InGaN/InAlN/GaN/InAlN RTD tunnel from the emitter region through the aligned discrete energy levels in the InGaN sub-quantum-well and GaN main-quantum-well into the collector region. The implantation of the InGaN sub-quantum-well alters the dominant transport mechanism, increase the transmission coefficient and give rise to the peak current and peak-to-valley current ratio. We also demonstrate that the most pronounced negative-differential-resistance characteristic can be achieved by choosing appropriately the In composition of In{sub x}Ga{sub 1−x}N at around x = 0.06.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing metal-insulator-insulator-metal tunnel diodes via defect enhanced direct tunneling

Metal-insulator-insulator-metal tunnel diodes with dissimilar work function electrodes and nanolaminate Al{sub 2}O{sub 3}-Ta{sub 2}O{sub 5} bilayer tunnel barriers deposited by atomic layer deposition are investigated. This combination of high and low electron affinity insulators, each with different dominant conduction mechanisms (tunneling and Frenkel-Poole emission), results in improved low voltage asymmetry and non-linearity of current versus voltage behavior. These improvements are due to defect enhanced direct tunneling in which electrons transport across the Ta{sub 2}O{sub 5} via defect based conduction before tunneling directly through the Al{sub 2}O{sub 3}, effectively narrowing the tunnel barrier. Conduction through the device is dominated by tunneling, and operation is relatively insensitive to temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of enhanced visible and infrared emissions in photonic crystal thin-film light-emitting diodes

Photonic crystals, in the form of closed-packed nano-pillar arrays patterned by nanosphere lithography, have been formed on the n-faces of InGaN thin-film vertical light-emitting diodes (LEDs). Through laser lift-off of the sapphire substrate, the thin-film LEDs conduct vertically with reduced dynamic resistances, as well as reduced thermal resistances. The photonic crystal plays a role in enhancing light extraction, not only at visible wavelengths but also at infrared wavelengths boosting heat radiation at high currents, so that heat-induced effects on internal quantum efficiencies are minimized. The observations are consistent with predictions from finite-difference time-domain simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser lift-off technique for freestanding GaN substrate using an In droplet formed by thermal decomposition of GaInN and its application to light-emitting diodes

We developed a laser lift-off technique for a freestanding GaN substrate using an In droplet formed by thermal decomposition of GaInN. A combination of an In droplet formed by thermal decomposition of GaInN during growth and a pulsed second-harmonic neodymium-doped yttrium aluminum garnet laser (λ = 532 nm) realized the lift-off GaN substrate. After laser lift-off of the GaN substrate, it was used to achieve 380 nm ultraviolet light-emitting diodes with light output enhanced 1.7-fold. In this way, the light extraction can be improved by removing the GaN substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding peculiarities in the optoelectronic characteristics of light emitting diodes based on (In,Ga)N/GaN nanowires

We investigate the effect of the p-type top contact on the optoelectronic characteristics of light emitting diodes (LEDs) based on (In,Ga)N/GaN nanowire (NW) ensembles grown by molecular beam epitaxy on Si substrates. We compare devices fabricated with either Ni/Au or indium tin oxide (ITO) top contact. The NW-LEDs with ITO exhibit a number density of NWs emitting electroluminescence about ten times higher, significantly lower turn-on voltage and series resistance, and a relative external quantum efficiency more than one order of magnitude higher than the sample with Ni/Au. These results show that limitations in the performance of such devices reported so far can be overcome by improving the p-type top-contact.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of In profile on simulations of InGaN/GaN multi-quantum-well light-emitting diodes

We investigate the impact of incorporating realistic In profiles in simulations of c-plane InGaN/GaN light-emitting diodes. Simulations based on a drift-diffusion model typically overestimate the onset voltage, but have usually been based on the assumption of ideal quantum wells with a square In profile. We demonstrate that more realistic profiles lead to significant modifications of current-density-versus-voltage characteristics, and explain the effects based on changes in the band diagram and carrier overlap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterizations of GaN micro-rods on graphene films for flexible light emitting diodes

We report the growth of GaN micro-rods and coaxial quantum-well heterostructures on graphene films, together with structural and optical characterization, for applications in flexible optical devices. Graphene films were grown on Cu foil by means of chemical vapor deposition, and used as the substrates for the growth of the GaN micro-rods, which were subsequently transferred onto SiO{sub 2}/Si substrates. Highly Si-doped, n-type GaN micro-rods were grown on the graphene films using metal–organic chemical vapor deposition. The growth and vertical alignment of the GaN micro-rods, which is a critical factor for the fabrication of high-performance light-emitting diodes (LEDs), were characterized using electron microscopy and X-ray diffraction. The GaN micro-rods exhibited promising photoluminescence characteristics for optoelectronic device applications, including room-temperature stimulated emission. To fabricate flexible LEDs, In{sub x}Ga{sub 1–x}N/GaN multiple quantum wells and a p-type GaN layer were deposited coaxially on the GaN micro-rods, and transferred onto Ag-coated polymer substrates using lift-off. Ti/Au and Ni/Au metal layers were formed to provide electrical contacts to the n-type and p-type GaN regions, respectively. The micro-rod LEDs exhibited intense emission of visible light, even after transfer onto the flexible polymer substrate, and reliable operation was achieved following numerous cycles of mechanical deformation.

36 MATERIALS SCIENCE↗

Electrical, optical, and material characterizations of blue InGaN light emitting diodes submitted to reverse-bias stress in water vapor condition

In this paper, we investigate degradation of InGaN/GaN light emitting diodes (LEDs) under reverse-bias operations in water vapor and dry air. To examine failure origins, electrical characterizations including current-voltage, breakdown current profiles, optical measurement, and multiple material analyses were performed. Our findings indicate that the diffusion of indium atoms in water vapor can expedite degradation. Investigation of reverse-bias stress can help provide insight into the effects of water vapor on LEDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the correlation of the Auger generated hot electron emission and efficiency droop in III-N light-emitting diodes

Recent experiments presented in by Iveland et al. [Phys. Rev. Lett. 110, 177406 (2013)] demonstrated that hot electron emission from cesiated p-contacts of III-nitride quantum-well (QW) light-emitting diodes (LEDs) coincides with the onset of the efficiency droop. We have carried out Monte Carlo simulations of hot-electron transport in realistic III-N LEDs. The simulations account for the hole population and all relevant electron scattering and recombination processes. We show that Auger recombination generates a significant hot electron population, which is temporarily trapped in the conduction band side-valleys, without decaying completely before reaching the p-contact. The leakage current due to electron overflow and thermal escape from the QWs is shown to have a minimal impact on the droop. We conclude that the experimentally observed hot electrons are created by Auger recombination in QWs, and that the Auger effect as the origin of the droop is the only consistent explanation for the experimental findings of Iveland et al., [Phys. Rev. Lett. 110, 177406 (2013)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Further reduction of efficiency droop effect by adding a lower-index dielectric interlayer in a surface plasmon coupled blue light-emitting diode with surface metal nanoparticles

Further reduction of the efficiency droop effect and further enhancements of internal quantum efficiency (IQE) and output intensity of a surface plasmon coupled, blue-emitting light-emitting diode (LED) by inserting a dielectric interlayer (DI) of a lower refractive index between p-GaN and surface Ag nanoparticles are demonstrated. The insertion of a DI leads to a blue shift of the localized surface plasmon (LSP) resonance spectrum and increases the LSP coupling strength at the quantum well emitting wavelength in the blue range. With SiO{sub 2} as the DI, a thinner DI leads to a stronger LSP coupling effect, when compared with the case of a thicker DI. By using GaZnO, which is a dielectric in the optical range and a good conductor under direct-current operation, as the DI, the LSP coupling results in the highest IQE, highest LED output intensity, and weakest droop effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Alternative p-doped hole transport material for low operating voltage and high efficiency organic light-emitting diodes

We investigate the properties of N,N′-[(Diphenyl-N,N′-bis)9,9,-dimethyl-fluoren-2-yl]-benzidine (BF-DPB) as hole transport material (HTL) in organic light-emitting diodes (OLEDs) and compare BF-DPB to the commonly used HTLs N,N,N′,N′-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD), 2,2′,7,7′-tetrakis(N,N′-di-p-methylphenylamino)-9,9′-spirobifluorene (Spiro-TTB), and N,N′-di(naphtalene-1-yl)-N,N′-diphenylbenzidine (NPB). The influence of 2,2′-(perfluoronaphthalene-2,6-diylidene)dimalononitrile (F6-TCNNQ p-dopant) concentration in BF-DPB on the operation voltage and efficiency of red and green phosphorescent OLEDs is studied; best results are achieved at 4 wt. % doping. Without any light extraction structure, BF-DPB based red (green) OLEDs achieve a luminous efficacy of 35 .1 lm/W (74 .0 lm/W) at 1000 cd/m{sup 2} and reach a very high brightness of 10 000 cd/m{sup 2} at a very low voltage of 3.2 V (3.1 V). We attribute this exceptionally low driving voltage to the high ionization potential of BF-DPB which enables more efficient hole injection from BF-DPB to the adjacent electron blocking layer. The high efficiency and low driving voltage lead to a significantly lower luminous efficacy roll-off compared to the other compounds and render BF-DPB an excellent HTL material for highly efficient OLEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of trench defects in InGaN/GaN light emitting diodes and implications for the “green gap” problem

The impact of trench defects in blue InGaN/GaN light emitting diodes (LEDs) has been investigated. Two mechanisms responsible for the structural degradation of the multiple quantum well (MQW) active region were identified. It was found that during the growth of the p-type GaN capping layer, loss of part of the active region enclosed within a trench defect occurred, affecting the top-most QWs in the MQW stack. Indium platelets and voids were also found to form preferentially at the bottom of the MQW stack. The presence of high densities of trench defects in the LEDs was found to relate to a significant reduction in photoluminescence and electroluminescence emission efficiency, for a range of excitation power densities and drive currents. This reduction in emission efficiency was attributed to an increase in the density of non-radiative recombination centres within the MQW stack, believed to be associated with the stacking mismatch boundaries which form part of the sub-surface structure of the trench defects. Investigation of the surface of green-emitting QW structures found a two decade increase in the density of trench defects, compared to its blue-emitting counterpart, suggesting that the efficiency of green-emitting LEDs may be strongly affected by the presence of these defects. Our results are therefore consistent with a model that the “green gap” problem might relate to localized strain relaxation occurring through defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monolithic phosphor-free InGaN/GaN quantum dot wavelength converter white light emitting diodes

We report the characteristics of phosphor-free self-organized InGaN/GaN quantum dot wavelength converter white light emitting diodes grown by plasma assisted molecular beam epitaxy. The exciting quantum dots, in which electrically injected carriers recombine, are blue-emitting and the converter dots are red-emitting. We have studied the effect of tuning the number of dot layers and the peak emission wavelength of the exciting and converter dots on the nature of the emitted white light, in terms of the chromaticity coordinates and correlated color temperature. Depending on the values of these wavelengths, color temperatures in the range of 4420–6700 K have been derived at a current density of 45 A/cm{sup 2} across multiple devices. The variation of the color temperature with change in injection current is found to be very small.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cu−In−Ga−S quantum dot composition-dependent device performance of electrically driven light-emitting diodes

Colloidal synthesis of ternary and quaternary quantum dots (QDs) of In/Ga ratio-varied Cu−In{sub 1−x}−Ga{sub x}−S (CIGS) with nominal x = 0, 0.5, 0.7, and 1 and their application for the fabrication of quantum dot-light-emitting diodes (QLEDs) are reported. Four QLEDs having CIGS QDs with different compositions are all solution-processed in the framework of multilayered structure, where QD emitting layer is sandwiched by hybrid charge transport layers of poly(9-vinlycarbazole) and ZnO nanoparticles. The device performance such as luminance and efficiency is found to be strongly dependent on the composition of CIGS QDs, and well interpreted by the device energy level diagram proposed through the determination of QD valence band minima by photoelectron emission spectroscopic measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗