Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Precipitation of ALn(CO{sub 3}){sub 2},xH{sub 2}O and Dy{sub 2}(CO{sub 3}){sub 3},xH{sub 2}O compounds from aqueous solutions for A{sup +}=Li{sup +},Na{sup +},K{sup +},Cs{sup +},NH{sub 4}{sup +} and Ln{sup 3+}=La{sup 3+},Nd{sup 3+},Eu{sup 3+},Dy{sup 3+}

Double carbonates of lanthanide (Ln) and alkaline or ammonium (A) ions, noted ALn(CO{sub 3}){sub 2},xH{sub 2}O, were precipitated from concentrated A{sub 2}CO{sub 3} aqueous solutions at room temperature and atmospheric pressure. Twelve hydrated compounds out of the twenty targeted ones have been obtained: Li(NdorEu)(CO{sub 3}){sub 2}, NaLa(CO{sub 3}){sub 2}, KNd(CO{sub 3}){sub 2},xH{sub 2}O, Cs(LaorNd)(CO{sub 3}){sub 2}, NH{sub 4}(Nd,EuorDy)(CO{sub 3}){sub 2}, Dy{sub 2}(CO{sub 3}){sub 3} from concentrated A{sub 2}CO{sub 3} solutions and Na(Nd,EuorDy)(CO{sub 3}){sub 2} from concentrated AHCO{sub 3} solutions. Although the trivalent lanthanide ions are often considered as analogs in solution, differences in their precipitation behaviour was observed, which is believed to have a kinetic origin in relation to the small differences in their ionic radii. The solid compounds were characterised by elemental analyses, thermogravimetry (TG), X-ray diffraction (XRD) and scanning electron microscope-energy dispersive spectroscopy (SEM-EDS). The powder diffraction patterns of nine solids were fitted using the tetragonal P4/mmmLaue class: LiNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(12.16{+-}0.02)A, c=(9.21{+-}0.02)A, LiEu(CO{sub 3}){sub 2},3H{sub 2}O: a=(12.201{+-}0.007)A, c=(9.23{+-}0.01)A, KNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(13.28{+-}0.04)A, c=(10.00{+-}0.04)A, CsLa(CO{sub 3}){sub 2},xH{sub 2}O: a=(10.82{+-}0.02)A, c=(8.18{+-}0.02)A, CsNd(CO{sub 3}){sub 2},xH{sub 2}O: a=(10.81{+-}0.07)A, c=(8.16{+-}0.07)A for NaLn(CO{sub 3}){sub 2},xH{sub 2}O: a=(11.10+1.75r{sub Ln{sup 3}{sup +}})A and c=(8.60+1.13r{sub Ln{sup 3+}})A, where r{sub Ln{sup 3+}} is the ionic radius of Ln{sup 3+} for a coordination number of 8 (r{sub La{sup 3+}}=1.16A, r{sub Nd{sup 3+}}=1.12A, r{sub Eu{sup 3+}}=1.07A and r{sub Dy{sup 3+}}=1.03A). It is proposed that all the NaLn(CO{sub 3}){sub 2},xH{sub 2}O compounds are of very similar structure, as evidenced by their XRD patterns and by the linear variations of the lattice parameters with r{sub Ln{sup 3+}}. The small differences in the lattice parameters can induce large modification of the precipitation pathways. Conversely, structural changes were evidenced within the A{sup +} series for ANd(CO{sub 3}){sub 2},xH{sub 2}O. Dy{sub 2}(CO{sub 3}){sub 3},xH{sub 2}O was also obtained as a by-product. Its lattice parameters are in good agreement with Eu{sub 2}(CO{sub 3}){sub 3},3H{sub 2}O ones. - Linear relationships between the ionic radii of the lanthanides and the unit cell parameters of the corresponding NaLn(CO{sub 3}){sub 2},xH{sub 2}O compounds, extracted from three different studies (our experimental data (black) are compared with those of Mochizuki et al. (red) and Runde et al. (blue))

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary CuInS{sub 2} photoelectrodes created using the sulfurization of Cu–In metal precursors for photoelectrochemical applications

Graphical abstract: At an irradiation of 100 mW/cm{sup 2} from a Xe lamp, the highest photo-enhancement current density of sample (f) obtained in this study was 5.81 mA/cm{sup 2} at an external potential of +0.4 V vs. an Ag/AgCl electrode in Na{sub 2}S (0.35 M) + K{sub 2}SO{sub 3} (0.25 M) solution. These results show that the physical properties of CuInS{sub 2} can be controlled by changing the [In]/[In + Cu] molar ratio in the metal precursors using the reactive sulfurization process with the sputtering of Cu–In metal precursors. - Highlights: • CuInS{sub 2} is deposited on substrates using sulfurization of Cu–In precursors. • Samples with [In]/[Cu + In] ratio of below 0.49 are p-type semiconductors. • Samples with [In]/[Cu + In] ratio of above 0.51 are n-type semiconductors. • Sample with [In]/[Cu + In] ratio of 0.53 has a maximum PEC response. - Abstract: Copper indium disulfide semiconductor layers are deposited onto glass substrates or fluorine-doped tin oxide-coated glass substrates with the reactive sulfurization and the sputtering of Cu–In metal precursors. X-ray diffraction patterns and energy dispersive analysis of X-ray results reveal that the samples change from the Cu-rich tetragonal CuInS{sub 2} to the In-rich CuInS{sub 2} phase with an increase in the [In]/[In + Cu] molar ratio in the metal precursors. The thicknesses and direct band gaps of the samples, determined from surface profile measurements and transmittance and reflectance spectra, are in the ranges of 0.82–1.29 μm and 1.39–1.53 eV, respectively. The carrier density and mobility of samples are in the ranges of 3.29 × 10{sup 14}–1.9 × 10{sup 20} cm{sup −3} and 0.58–17.41 cm{sup 2}/V s, respectively. A sample with an [In]/[In + Cu] molar ratio of 0.53 has a maximum photo enhancement current density of 5.81 mA/cm{sup 2} at an applied bias of 0.4 V vs. an Ag/AgCl electrode in aqueous Na{sub 2}S (0.35 M) + K{sub 2}SO{sub 3} (0.25 M) solution.

36 MATERIALS SCIENCE↗

Ferroelectric, and piezoelectric properties of BaTi{sub 1−x}Al{sub x}O{sub 3}, 0 ≤ x ≤ 0.015

Single phase polycrystalline samples of BaTi{sub 1−x}Al{sub x}O{sub 3}, 0 ≤ x ≤ 0.015, have been prepared by a conventional powder processing method. The Rietveld refinements of X- ray powder diffraction patterns at room temperature indicate that the samples crystallize in tetragonal structure with group symmetry P4mm. Because of the oxygen vacancies, the volume of the unit cell increases with increasing x. Field emission scanning electron microscopy revealed that the particle size of pure BTO ceramics was affected by the Al content. Dielectric, ferroelectric and piezoelectric properties of pure BTO as well as Al-doped BTO were studied. It was found that the dielectric permittivity (ε′) increases significantly with increasing x while the transition from ferroelectric phase to a paraelectric phase changes slightly. The Curie-Weiss law is verified over a wide temperature range. Both ferroelectric and piezoelectric properties of BTO are enhanced by the substitution of Ti{sup 4+} by Al{sup 3+} ions. Piezoelectric strains of Al-doped BTO showed a suitable behavior for application compared with that of pure BTO compound. Finally, the results obtained in this work are discussed and compared with those for similar materials.

36 MATERIALS SCIENCE↗

Room temperature dual ferroic behaviour of ball mill synthesized NdFeO{sub 3} orthoferrite

Phase pure NdFeO{sub 3} has been achieved using high energy ball milling of oxide precursors with subsequent sintering. It is established that structural arrangement of NdFeO{sub 3} regulates the multifunctional feature of the material. Rietveld refinement of the room temperature X-ray diffraction pattern shows that the Fe-O-Fe bond angle significantly favors the super exchange interaction, which is predominantly antiferromagnetic in nature. Magnetization measurement illustrates antiferromagnetic behaviour with a weak ferromagnetic component caused by the canted nature of the Fe{sup 3+} spins at room temperature. Absorption bands in the visible ambit, apparent from the UV-Vis diffuse reflectance studies, is found due to the crystal ligand field of octahedral oxygen environment of Fe{sup 3+} ions. The direct band gap is estimated to be 2.39 eV from the diffuse reflectance spectrum. The lossy natured ferroelectric loop having a maximum polarization of 0.23 μC/cm{sup 2} at room temperature is found to be driven by the non-collinear magnetic structure with reverse Dzyaloshinskii–Moriya effect. Magnetic field has influence on the dielectric constant as evident from the impedance spectroscopy, indicating the strong coupling between ferroelectric and the magnetic structure of NdFeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high-temperature neutron diffraction study of Nb 2 AlC and TiNbAlC

In this paper, we report on the crystal structures of Nb 2 AlC and TiNbAlC actual composition (Ti 0.45 ,Nb 0.55 ) 2 AlC compounds determined from Rietveld analysis of neutron diffraction patterns in the 300-1173 K temperature range. The average linear thermal expansion coefficients of a Nb 2 AlC sample in the a and c directions are, respectively, 7.9(5)x10 -6 K -1 and 7.7(5)x10 -6 K -1 on one neutron diffractometer and 7.3(3)x10 -6 K -1 and 7.0(2)x10 -6 K -1 on a second diffractometer. The respective values for the (Ti 0.45 ,Nb 0.55 ) 2 AlC composition - only tested on one diffractometer - are 8.5(3)x10 -6 K -1 and 7.5(5)x10 -6 K -1 . These values are relatively low compared to other MAX phases. Like other MAX phases, however, the atomic displacement parameters show that the Al atoms vibrate with higher amplitudes than the Ti and C atoms, and 1 more along the basal planes than normal to them. In addition, when the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Al atoms. In case of the Nb and C atoms, the agreement was more qualitative.

36 MATERIALS SCIENCE↗

Fabrication and luminescence properties of one-dimensional ZnAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) microfibers by electrospinning method

Graphical abstract: Different color emission can be realized in one-dimensional ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) microfibers fabricated by electronspinning method by changing the doping ions. Highlights: ► ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) microfibers were obtained by electronspinning method. ► Luminescence properties were due to the transitions of Cr{sup 3+}, Eu{sup 3+} and Tb{sup 3+} ions. ► A new band was observed around 600 nm in CL spectra of ZnAl{sub 2}O{sub 4}: Cr{sup 3+} microfibers. -- Abstract: One-dimensional ZnAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) microfibers were fabricated by electrospinning method. X-ray diffraction pattern confirmed that the fibers were composed of the cubic ZnAl{sub 2}O{sub 4} phase. Scanning electron microscopy and transmission electron microscopy results indicated that the ZnAl{sub 2}O{sub 4} microfibers annealed at 1000 °C were composed of some smaller nanoparticles and the diameters of the microfibers were in the range of 140–230 nm. Under the excitation of ultraviolet and low-voltage electron beams (3–5 kV), the ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) samples showed the emission of the host and the doping ions. The evolution of the optical properties of microfibers with increasing the doping concentration was investigated in detail. Green and red emissions can be realized in ZnAl{sub 2}O{sub 4} microfibers by changing the doping ions. The ZnAl{sub 2}O{sub 4}: A{sup 3+} (A = Cr, Eu, Tb) microfibers have potential applications in full-color field emission displays.

36 MATERIALS SCIENCE↗

Pulsed laser deposition of single layer, hexagonal boron nitride (white graphene, h-BN) on fiber-oriented Ag(111)/SrTiO{sub 3}(001)

We report on the growth of 1–10 ML films of hexagonal boron nitride (h-BN), also known as white graphene, on fiber-oriented Ag buffer films on SrTiO{sub 3}(001) by pulsed laser deposition. The Ag buffer films of 40 nm thickness were used as substitutes for expensive single crystal metallic substrates. In-situ, reflection high-energy electron diffraction was used to monitor the surface structure of the Ag films and to observe the formation of the characteristic h-BN diffraction pattern. Further evidence of the growth of h-BN was provided by attenuated total reflectance spectroscopy, which showed the characteristic h-BN peaks at ∼780 cm{sup −1} and 1367.4 cm{sup −1}. Ex-situ photoelectron spectroscopy showed that the surface of the h-BN films is stoichiometric. The physical structure of the films was confirmed by scanning electron microscopy. The h-BN films grew as large, sub-millimeter sheets with nano- and micro-sheets scattered on the surface. The h-BN sheets can be exfoliated by the micromechanical adhesive tape method. Spectral analysis was performed by energy dispersive spectroscopy in order to identify the h-BN sheets after exfoliation. The use of thin film Ag allows for reduced use of Ag and makes it possible to adjust the surface morphology of the thin film prior to h-BN growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Electrical Transport and Magnetic Properties of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} Bilayer Thin Films

Bilayer films of Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Nd{sub 0.8}Na{sub 0.2} MnO{sub 3} were grown on 001-orientated LaAlO{sub 3} substrate by using RF magnetron sputtering. The thickness of the Nd{sub 0.8}Na{sub 0.2}MnO{sub 3} (NNMO) film was kept fixed at 120 nm while that of the Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3} (NSMO) film was varied from 12 to 100 nm. X-ray diffraction patterns confirm the growth of films along the (001) direction, and the out-of-plane lattice constant of the NSMO film decreases with an increase in film thickness. The bilayer films are found to undergo out-of-plane tensile strain, and the lattice strain is found to decrease with an increase in film thickness. The ferromagnetic transition temperature is found to increase with an increase in the NSMO film thickness. M–H loops recorded at 50 K show a systematic increase in saturation magnetisation with an increase in film thickness. Metal–insulator transition has been observed for the film thickness of 30 nm and above, and the transition temperature is found to increase with an increase in film thickness. The electrical resistivity data in the metallic region were explained based on electron–electron and electron–magnon scattering mechanism by including a weak localisation effect at low temperature. The electrical resistivity data in the insulating region follow the Mott-variable range hopping model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of ultrafine Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) pyrochlore oxides by stearic acid method

Stearic acid method (SAM) was developed to synthesize series of pyrochlore Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) nanocrystals. The synthesis process was monitored by X-ray diffraction, Thermal-gravimetric-differential thermal analysis and Fourier Transform InfraRed methods. Comparing with traditional solid-state reaction (SSR), Ln{sub 2}Ti{sub 2}O{sub 7} can be synthesized at relatively low temperature (700-800 deg. C) with shortened reaction time (2-4 h). The average particle size of Ln{sub 2}Ti{sub 2}O{sub 7} was greatly reduced (ca. 40 nm) and the BET surface area was increased (ca. 12 m{sup 2}/g) by using SAM. From the X-ray diffraction patterns, we found that Ln has an effect on the crystal structure of Ln{sub 2}Ti{sub 2}O{sub 7}, every lattice peak shifted to larger angle slightly with the increasing atomic number of Ln. Also, the lattice constant of Ln{sub 2}Ti{sub 2}O{sub 7} was calculated by Jade.5 and found it decreased along with the decrease of ionic radius of Ln{sup 3+}. The morphology of obtained Ln{sub 2}Ti{sub 2}O{sub 7} was determined by transmission electron microscopy technique. Results showed that the obtained Ln{sub 2}Ti{sub 2}O{sub 7} were all square-like and the interplanar distance of Ln{sub 2}Ti{sub 2}O{sub 7} (Ln = Sm, Gd, Dy, Er) according to (111) plane was 0.65, 0.64, 0.63, and 0.62 nm respectively, which was measured from High Resolution Transmission Electron Microscopy images. Possible reason for this phenomenon was presented.

36 MATERIALS SCIENCE↗

iCHORD-SI combination as an alternative to EDS-EBSD coupling for the characterization of γ-γ′ nickel-based superalloy microstructures

Highlights: • A new method to get orientation maps discriminating the gamma and gamma’ phases of Ni superalloys is described. • The method combines the iCHORD technique with secondary ion imaging. • The new method resolves precipitates down to 150 nm within a reasonable acquisition time. - Abstract: Because they exhibit very similar diffraction patterns, the γ and γ′ phases of nickel-based superalloys cannot be distinguished by the conventional EBSD technique alone. This paper presents an original method which discriminates those phases on an orientation map by exploiting their chemical differences. Performed with a Focused Ion Beam (FIB) microscope, the method is the combination of the ion CHanneling ORientation Determination technique (iCHORD) – recently developed by Langlois et al. [1] – with the chemical information obtained from Secondary Ion (SI) images. The performances of the method are compared to the EDS-EBSD coupling which also discriminates phases based on their chemical compositions. Applied filters, angular resolution, spatial resolution of the phase discrimination and acquisition time are discussed. It results that the iCHORD–SI combination offers an orientation map with an angular resolution slightly decreased compared to that of the EBSD technique, but with a good phase resolution (down to 150 nm) and within a reasonable acquisition time. Thus, the iCHORD–SI combination appears to be an interesting method for the crystallographic systems where phases are difficult to discriminate by the EBSD technique alone but present a significant chemical contrast.

36 MATERIALS SCIENCE↗

Deposition of Pd–Ag thin film membranes on ceramic supports for hydrogen purification/separation

Highlights: • Thin film Pd–Ag membranes have been produced for hydrogen selectivity. • Magnetron sputtering yields Pd–Ag compact films for atomic H diffusion. • The thin film Pd–Ag membranes yielded a selectivity of α (H{sub 2}/N{sub 2}) = 10. - Abstract: Pd–Ag based membranes supported on porous α-Al{sub 2}O{sub 3} (doped with yttria-stabilized zirconia) were studied for hydrogen selective separation. Magnetron sputtering technique was employed for the synthesis of thin film membranes. The hydrogen permeation flux is affected by the membrane columnar structure, which is formed during deposition. From scanning electron microscopy analysis, it was observed that different sputtering deposition pressures lead to distinct columnar structure growth. X-ray diffraction patterns provided evidence of a Pd–Ag solid solution with an average crystallite domain size of 21 nm, whose preferential growth can be altered by the deposition pressure. The gas-permeation results have shown that the Pd–Ag membrane supported on porous α-Al{sub 2}O{sub 3} is selective toward H{sub 2}. For optimized membrane synthesis conditions, the permeance toward N{sub 2} is 0.076 × 10{sup −6} mol m{sup −2} s{sup −1} Pa{sup −1} at room temperature, whereas for a pressure difference of 300 kPa the H{sub 2}-flux is of the order of ca. 0.21 mol m{sup −2} s{sup −1}, which corresponds to a permeance of 0.71 × 10{sup −6} mol m{sup −2} s{sup −1} Pa{sup −1}, yielding a selectivity of α (H{sub 2}/N{sub 2}) = 10. These findings suggest that the membrane has a reasonable capacity to selectively permeate this gas.

36 MATERIALS SCIENCE↗

Fabrication and temperature-dependent magnetic properties of one-dimensional multilayer Au–Ni–Au–Ni–Au nanowires

Multilayer Au–Ni–Au–Ni–Au nanowires with a controlled diameter of ∼100 nm were synthesized by electrochemical deposition in porous alumina templates. The length of each Ni-segment was controlled up to ∼230 nm, while the length of the Au segment sandwiched between two Ni segments was ∼180 nm. X-ray diffraction patterns and energy-dispersive X-ray spectra confirmed the formation of purely crystalline nanowires. The magnetic properties of the multilayer Au–Ni–Au–Ni–Au nanowires were investigated in the temperature range 2–300 K. Room-temperature magnetic hysteresis confirmed the ferromagnetic nature of the nanowires. The plot of coercivity as a function of temperature (from 2 to 300 K) followed law applicable for ferromagnetic nanostructures. The magnetization tended to increase as the temperature decreased, following the modified Bloch's law similar to ferromagnetic nanoparticles. - Graphical abstract: (a) SEM image of Au–Ni–Au–Ni–Au nanowire with 230 nm Ni segment length and 180 nm Au sandwiched between Ni segments (b) Kneller's law (c) Bloch's law Display Omitted - Highlights: • Electrochemical fabrication of Au–Ni–Au–Ni–Au nanowires in alumina templates. • Formation of beadlike structure of Ni segments. • Coercivity versus T follows Kneller's law for ferromagnetic materials. • Magnetization as a function of temperature follows the modified Bloch's law.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain induced enhancement of magnetization in Ba{sub 2}FeMoO{sub 6} based heterostructure with (Ba{sub x}Sr{sub 1-x})TiO{sub 3}

High quality epitaxial Ba{sub 2}FeMoO{sub 6} thin films and Ba{sub 2}FeMoO{sub 6}–(Ba{sub x}Sr{sub 1−x})TiO{sub 3} bi-layer (BL) and superlattice (SL) structures were grown via pulsed laser deposition under low oxygen pressure, and their structural, magnetic, and magneto-transport properties were examined. Superlattice and bi-layer structures were confirmed by X-ray diffraction patterns. Low temperature magnetic measurement shows that the saturation magnetization (M{sub S}) is significantly higher for SLs and almost similar or lower for BLs, when compared to phase pure Ba{sub 2}FeMoO{sub 6} thin films. The variation of the coercive field (H{sub C}) follows exact opposite trend, where BL samples have higher H{sub C} and SL samples have lower H{sub C} than pure Ba{sub 2}FeMoO{sub 6} thin films. Also, a significant decrease of the Curie temperature is found in both BL and SL structures compared to pure Ba{sub 2}FeMoO{sub 6} thin films. Negative magneto-resistance is seen in all the BL and SL structures as well as in pure Ba{sub 2}FeMoO{sub 6} thin films. In contrast to the magnetic properties, the magneto-transport properties do not show much variation with induced strain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation into the effect on structure of oxoanion doping in Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O

In this paper an investigation into the effect of transition metal ion and selenate/fluorophosphate doping on the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O (M=transition metal) materials is reported. In agreement with previous reports, the monoclinic (Kröhnkite) structure is adopted for M=Mn, Fe, Co, Cu, while for the smallest first row divalent transition metal ion, M=Ni, the triclinic (Fairfieldite structure) is adopted. On selenate doping there is a changeover in structure from monoclinic to triclinic for M=Fe, Co, Cu, with the larger Fe{sup 2+} system requiring the highest level of selenate to complete the changeover. Thus the results suggest that the relative stability of the two structure types is influenced by the relative size of the transition metal: oxoanion group, with the triclinic structure favoured for small transition metals/large oxoanions. The successful synthesis of fluorophosphate doped samples, Na{sub 2}M(SO{sub 4}){sub 2−x}(PO{sub 3}F){sub x}·2H{sub 2}O was also obtained for M=Fe, Co, Cu, with the results showing a changeover in structure from monoclinic to triclinic for M=Co, Cu for very low levels (x=0.1) of fluorophosphate. In the case of M=Fe, the successful synthesis of fluorophosphates samples was achieved for x≤0.3, although no change in cell symmetry was observed. Rather in this particular case, the X-ray diffraction patterns showed evidence for selective peak broadening, attributed to local disorder as a result of the fluorophosphate group disrupting the H-bonding network. Overall the work highlights how isovalent doping can be exploited to alter the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O systems. - Graphical abstract: Partial substitution of sulfate in Na{sub 2}M(SO{sub 4}){sub 2}0.2H{sub 2}O (M=Co, Cu) by selenate or fluorophosphate leads to a structural change from the monoclinic Kröhnkite to the triclinic Fairfieldite structure. - Highlights: • The successful synthesis of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O (M=transition metal) phases doped with selenate and fluorophosphate. • A change in structure is observed on selenate doping for M=Fe, Co, Cu. • This change in structure is also observed on fluorophosphate doping for M=Co, Cu. • The work highlights how isovalent doping can be exploited to alter the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed rare earth oxides derived from monazite sand as an inexpensive precursor material for room temperature magnetic refrigeration applications

Highlights: • Compound is synthesized using mixed rare earth oxide derived from monazite sand. • Rietveld refinement confirms the compound is a mixture of rare earth manganites and CeO{sub 2}. • The compound exhibits a magnetic entropy change of 3.28 J kg{sup −1} K{sup −1} under 50 kOe magnetic field at 310 K. • The compound exhibit a RCP of 120 J kg{sup −1} and ΔT{sub ad} of 2.11 K at 310 K under 50 kOe field. - Abstract: An inexpensive perovskite type (RE{sub MIX}){sub 0.67}Sr{sub 0.33}MnO{sub 3} compound is synthesized via solid state method using mixed rare earth oxide precursor derived from monazite sand. Rietveld refinement of X-ray powder diffraction patterns confirms the compound is a mixture of rare earth manganites which is the major phase and CeO{sub 2} as the secondary phase. The compound shows a second order ferromagnetic to paramagnetic transition near room temperature and exhibits a magnetic entropy change (-ΔS{sub M}) of 3.28 J kg{sup −1} K{sup −1} with a relative cooling power (RCP) of 120 J kg{sup −1} and an adiabatic temperature change (ΔT{sub ad}) of 2.11 K at 310 K under 50 kOe magnetic field. The Debye temperature of the compound is found to be 543 K and room temperature thermal conductivity is 4.26 W m{sup −1} K{sup −1}. The temperature variation of electrical resistivity shows a metal to insulator transition around 180 K, which gets shifted towards higher temperature upon the application of magnetic field. The compound shows a large value of −ΔS{sub M} and this work makes an endeavor to develop low–cost materials for the magnetic refrigeration applications near the room temperature.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of the perovskite YCo{sub 0.5}Fe{sub 0.5}O{sub 3}

Y Co{sub 0.5}Fe{sub 0.5}O{sub 3}, in a structure of perovskite, has been successfully prepared with citrate precursors at 950-1100 °C in air by the sol-gel method. The X-ray diffraction patterns show that the samples are orthorhombic within the space group Pnma, where the Co and Fe ions are disordered at the 4b crystallographic sites. The crystal structure refinement undertaken by the Rietveld method has shown that the distortion of Co(Fe)O{sub 6} octahedra are large, where the ratio of Co/Fe-O bonding length along a axis to that in the bc plane is about 1.07. Such a large crystal lattice distortion implies a strong lattice-magnetism coupling, which may be utilized in the magnetoelectric devices. Magnetic measurement indicates that the Y Co{sub 0.5}Fe{sub 0.5}O{sub 3} is antiferromagnetic but showing weak ferromagnetism. We find that Fe{sup 3+} ions are in high-spin states, while Co{sup 3+} ions are in low-spin states which do not contribute to the magnetism. Both Fe{sup 3+} and Co{sup 3+} ions are not Jahn-Teller activated although the lattice distortion is large.

36 MATERIALS SCIENCE↗

Structural, optical, and electrical properties of NiO-In composite films deposited by radio frequency cosputtering

In-doped NiO films with indium concentrations ranging from 0 to 30.3 at. % were deposited on glass substrates to investigate corresponding structural, optical, and electrical property variations. The x-ray diffraction patterns show that all films display only NiO peaks. When In atoms were added to NiO films, the NiO peaks shifted to lower angles, indicating that the lattice parameters of the films increased due to the larger In ions substituting for the smaller Ni ions. An electrical resistivity (ρ) too high to be measured occurred when the indium concentration in the NiO film was less than 15.6 at. %. The ρ value dropped significantly to 0.06 Ω·cm as the indium concentration increased to 26.9 at. %. Upon further raising the In to 30.3 at. %, the ρ value decreased further to 0.01 Ω·cm. All the In-doped NiO films showed n-type conduction. The transmittance of undoped NiO film is as high as 96%. On raising the indium concentration to 15.6, 19.9, 26.9, and 30.3 at. %, the transmittances decreased further to 68%, 62%, 57%, and 47%, respectively. Introducing higher In concentrations improved the films’ thermal stability of electrical resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aqueous-based route toward Fe:ZnSe semiconductor nanocrystals: Synthesis and characterization

Nearly monodisperse and luminescent Fe-doped ZnSe semiconductor nanocrystals were synthesized by an aqueous-based route. The obtained nanocrystals were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, photoluminescence and ultraviolet-visible absorption spectroscopy. The resulting nanocrystals were well retained in the zinc blende structure, and the Fe dopants were doped into the ZnSe nanocrystals, as confirmed by X-ray photoelectron spectroscopy. From combination of transmission electron microscopy result and computing methods according to ultraviolet-visible absorption spectrum and X-ray diffraction pattern, particle size of the obtained nanocrystals was found to be about 5 nm. Thioglycolic acid as ligand was successfully capped on the surface of the resulting nanocrystals, confirmed by Fourier transform infrared and energy dispersive X-ray spectroscopy. The obtained nanocrystals exhibit an emission peak at 431 nm; and the photoluminescence band is relatively narrow and symmetric, which indicates that the nanocrystals are nearly monodisperse and homogeneous. Absorption shoulder of the resulting nanocrystals is blue-shifted compared with that of corresponding bulk ZnSe, indicating the quantum confinement effect. The possible reaction mechanism of formation of Fe-doped ZnSe nanocrystals in the aqueous solution was also discussed. Our results demonstrate that the aqueous-based route could be successfully adopted for producing high-quality doped semiconductor nanocrystals. - Research Highlights: {yields} An aqueous-based route is demonstrated for synthesizing Fe:ZnSe nanocrystals. {yields} Structure, composition and optical properties of the nanocrystals were investigated. {yields} The synthetic route could be adopted for producing high-quality doped nanocrystals.

36 MATERIALS SCIENCE↗