Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUNCTIONALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

SU-F-T-660: Evaluating the Benefit of Using Dual-Function Fiducial Markers for In-Situ Delivery of Radiosenistizing Gold Nanoparticles During Image-Guided Radiotherapy

Purpose: Dual-function fiducials loaded with radiosensitizers, like gold nanoparticles (GNP), offer an innovative approach for ensuring geometric accuracy during image-guided radiotherapy (IGRT) and significantly increasing therapeutic efficacy due to controlled in-situ release of the radiosensitizers. This study retrospectively investigates the dosimetric benefit of using up to two such dual-function fiducial markers instead of traditional single function fiducials during IGRT. Methods: A computational code was developed to investigate the dosimetric benefit for 10 real patient tumor volumes of up to 6.5 cm diameter. The intra-tumoral space-time biodistribution of the GNP was modeled as in previous studies based on Fick’s second law. The corresponding dose-enhancement for each tumor voxel due to the GNP was also calculated for clinical 6MV beam configurations. Various loading concentrations (25–50 mg/g) were studied, as a function of GNP size, to determine potential for clinically significant dose enhancement. The time between initial implantation of dual-function fiducials to the beginning of radiotherapy was assumed to be 14 days as typical for many clinics. Results: A single dual-function fiducial could achieve at least a DEF of 1.2 for patients with tumors less than 1.4 cm diameter after 14 days. Replacing two single function fiducials with dual-function ones at the same locations achieved at least the required minimal DEF for tumors that are 2 cm diameter in 3 patients. The results also revealed dosimetrically better fiducial locations which could enable significant DEF when using one or two dual function fiducials. 2 nm sizes showed the most feasibility. Conclusion: The results highlight the potential of tumor sub-volume radiation boosting using GNP released from fiducials, and the ability to customize the DEF throughout the tumor by using two dual-function fiducials, varying the initial concentration and nanoparticle size. The results demonstrate potential for employing dual-function fiducials in the development of GNP-aided radiotherapy.

60 APPLIED LIFE SCIENCES↗

Functional gene arrays-based analysis of fecal microbiomes in patients with liver cirrhosis

Background: Human gut microbiota plays an important role in the pathogenesis of cirrhosis complications. Although the phylogenetic diversity of intestinal microbiota in patients with liver cirrhosis has been examined in several studies, little is known about their functional composition and structure. Results: To characterize the functional gene diversity of the gut microbiome in cirrhotic patients, we recruited a total of 42 individuals, 12 alcoholic cirrhosis patients, 18 hepatitis B virus (HBV)-related cirrhosis patients, and 12 normal controls. We determined the functional structure of these samples using a specific functional gene array, which is a combination of GeoChip for monitoring biogeochemical processes and HuMiChip specifically designed for analyzing human microbiomes. Our experimental data showed that the microbial community functional composition and structure were dramatically distinctive in the alcoholic cirrhosis. Various microbial functional genes involved in organic remediation, stress response, antibiotic resistance, metal resistance, and virulence were highly enriched in the alcoholic cirrhosis group compared to the control group and HBV-related cirrhosis group. Cirrhosis may have distinct influences on metabolic potential of fecal microbial communities. The abundance of functional genes relevant to nutrient metabolism, including amino acid metabolism, lipid metabolism, nucleotide metabolism, and isoprenoid biosynthesis, were significantly decreased in both alcoholic cirrhosis group and HBV-related cirrhosis group. Significant correlations were observed between functional gene abundances and Child-Pugh scores, such as those encoding aspartate-ammonia ligase, transaldolase, adenylosuccinate synthetase and IMP dehydrogenase. Conclusions: Functional gene array was utilized to study the gut microbiome in alcoholic and HBV-related cirrhosis patients and controls in this study. Our array data indicated that the functional composition of fecal microbiomes was heavily influenced by cirrhosis, especially by alcoholic cirrhosis. This study provides new insights into the functional potentials and activity of gut microbiota in cirrhotic patients with different etiologies.

59 BASIC BIOLOGICAL SCIENCES↗

An Exchange-Correlation Functional Capturing Bulk Surface and Confinement Physics

Due to its balance of accuracy and computational cost, density functional theory has become the method of choice for computing the electronic structure and related properties of materials. However, present-day semilocal approximations to the exchange-correlation energy of density functional theory break down for materials containing d and f electrons. In this report we summarize our progress in addressing this issue. We describe the construction of the BSC exchange-correlation functional within the subsystem functional formalism which enables us to capture bulk, surface, and confinement physics with a single exchange-correlation functional. We report on the initial assessment of this functional within the jellium surface system and demonstrate that the BSC functional captures the confinement physics more accurately than standard semilocal exchange-correlation functionals. We conclude by outlining our future research objectives which focus on refining the functional form of the BSC functional and achieving significantly more accurate energetics of materials containing f and d electrons than existing semilocal functionals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Safety Functions and Features, Events and Processes for the E-Area Performance Assessment

The DOE Technical Standard, “Disposal Authorization Statement and Tank Closure Documentation,” (DOE 2017) recommends the use of safety functions and features, events and processes (FEPs) to support development of conceptual models and identification of scenarios to be considered in a performance assessment (PA). The FEP process provides a means to describe how a PA considers and addresses the factors that could influence the performance of key barriers. Understanding the roles of barriers in terms of limiting migration helps to focus on how changes in the system could lead to a situation where those roles cannot be fulfilled and there is the potential for compromised performance. The FEPs screening and review process was used to identify FEPs that are relevant for the EArea Low-Level Waste Facility (LLWF) and specifically those FEPs that could have a detrimental impact on the effectiveness of a given safety function. For this PA, a default list of FEPs developed at the International Atomic Energy Agency (IAEA 2004) and an approach implemented for PAs at the Hanford and Idaho sites (Mehta et al. 2016, DOE-ID 2019) are used to identify processes and events that could influence the effectiveness of a given safety function for the E-Area LLWF (e.g., subsidence can impact the safety function of the cover system and lead to increased infiltration). The Hanford and Idaho PAs represent two of the most recent applications of this approach. The PA evaluates the potential impacts of changes in performance of different features of the system and demonstrates that the safety functions represent multiple and redundant barriers. Barrier analyses, assuming a safety function is not present, also test the robustness of the system in the event of the loss of one or more safety functions. Such evaluations also support a qualitative illustration of the concept of defense in depth. The safety concept for closure of the E-Area LLWF (generically referred to as “E-Area”) encompasses a variety of different features (i.e., administrative controls, natural site features, and engineered barriers) that reduce the potential impacts on human health and the environment from the residual waste that will remain after closure. These features can be represented as a collection of safety functions acting independently and as a system to provide for overall safety. In some applications, there have been attempts to assign numerical expectations to specific safety functions, but that is not the intent in this case. The concept of safety functions is used more qualitatively in two ways for this PA: 1. To illustrate the robustness of the E-Area design, operational practices and closure approach by documenting features that are and are not credited in different modeling cases. 2. To identify the roles of the different features and potential processes and events that could compromise the performance of safety features and need to be considered when developing the modeling approach. This report addresses both safety functions and FEPs for the E-Area PA.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Excitation energies with linear response density matrix functional theory along the dissociation coordinate of an electron-pair bond in N-electron systems

Time dependent density matrix functional theory in its adiabatic linear response formulation delivers exact excitation energies ω{sub α} and oscillator strengths f{sub α} for two-electron systems if extended to the so-called phase including natural orbital (PINO) theory. The Löwdin-Shull expression for the energy of two-electron systems in terms of the natural orbitals and their phases affords in this case an exact phase-including natural orbital functional (PILS), which is non-primitive (contains other than just J and K integrals). In this paper, the extension of the PILS functional to N-electron systems is investigated. With the example of an elementary primitive NO functional (BBC1) it is shown that current density matrix functional theory ground state functionals, which were designed to produce decent approximations to the total energy, fail to deliver a qualitatively correct structure of the (inverse) response function, due to essential deficiencies in the reconstruction of the two-body reduced density matrix (2RDM). We now deduce essential features of an N-electron functional from a wavefunction Ansatz: The extension of the two-electron Löwdin-Shull wavefunction to the N-electron case informs about the phase information. In this paper, applications of this extended Löwdin-Shull (ELS) functional are considered for the simplest case, ELS(1): one (dissociating) two-electron bond in the field of occupied (including core) orbitals. ELS(1) produces high quality ω{sub α}(R) curves along the bond dissociation coordinate R for the molecules LiH, Li{sub 2}, and BH with the two outer valence electrons correlated. All of these results indicate that response properties are much more sensitive to deficiencies in the reconstruction of the 2RDM than the ground state energy, since derivatives of the functional with respect to both the NOs and the occupation numbers need to be accurate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Non-perturbative calculation of molecular magnetic properties within current-density functional theory

We present a novel implementation of Kohn–Sham density-functional theory utilizing London atomic orbitals as basis functions. External magnetic fields are treated non-perturbatively, which enable the study of both magnetic response properties and the effects of strong fields, using either standard density functionals or current-density functionals—the implementation is the first fully self-consistent implementation of the latter for molecules. Pilot applications are presented for the finite-field calculation of molecular magnetizabilities, hypermagnetizabilities, and nuclear magnetic resonance shielding constants, focusing on the impact of current-density functionals on the accuracy of the results. Existing current-density functionals based on the gauge-invariant vorticity are tested and found to be sensitive to numerical details of their implementation. Furthermore, when appropriately regularized, the resulting magnetic properties show no improvement over standard density-functional results. An advantage of the present implementation is the ability to apply density-functional theory to molecules in very strong magnetic fields, where the perturbative approach breaks down. Comparison with high accuracy full-configuration-interaction results show that the inadequacies of current-density approximations are exacerbated with increasing magnetic field strength. Standard density-functionals remain well behaved but fail to deliver high accuracy. The need for improved current-dependent density-functionals, and how they may be tested using the presented implementation, is discussed in light of our findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal exchange-correlation functionals: Capturing quantum electron behavior in warm, dense plasmas

We summarize and give perspective upon recent progress in developing non-empirical constraint-based thermal (i.e., free energy) exchange-correlation (XC) density functionals essential for accurate description of the quantum behavior of electrons in warm, dense plasmas. After delineating the critical role of ground-state functionals for zero-temperature, time-dependent DFT, we outline the underpinnings of local density approximation, generalized gradient approximation (GGA), and meta-GGA XC free-energy functionals. Two basic thermalization principles for upgrading ground-state XC functionals to successful thermal ones are emphasized. Then, we turn to a long-standing challenge, assessment of the accuracy of well-founded functionals. Unlike the ground state, there are a few exact results for large T and P. An exception is path integral Monte Carlo (PIMC) data for dense H/D and He plasmas. For those, we did ab initio molecular dynamics simulations under selected thermodynamic conditions employing five thermal XC functionals: two approximate thermal GGAs, fully thermal GGA, an approximate meta-GGA, and fully thermal meta-GGA. Comparisons with the PIMC data show that functionals thermalized by augmenting a non-thermal functional with a lower-level thermal contribution are inferior to functionals with thermal XC and spatial inhomogeneity effects taken into account at the same level of refinement. We believe this and similar evidence should be convincing to the high-energy density physics community of the necessity of use of proper thermal XC functionals in simulation studies of finite-temperature quantum effects in warm, dense plasmas.

Ab-initio molecular dynamics↗

Fully thermal meta-GGA exchange correlation free-energy density functional

The application of density functional theory to materials in the warm dense matter regime has motivated the development of exchange-correlation functionals which incorporate proper, explicit temperature dependence. Previous work has yielded fully-thermal exchange-correlation free energy functionals at the local density approximation (LDA) and generalized gradient approximation (GGA) levels of refinement. Recently an additive thermal correction scheme was utilized to construct a meta-GGA exchange-correlation (XC) functional in which thermal effects are treated at the GGA level. Here, the f TSCAN free-energy XC functional presented here includes thermal effects through the meta-GGA level in the context of the SCAN (strongly constrained and appropriately normed) ground-state functional. The f TSCAN functional provides generality while achieving similar performance to a thermal GGA functional at high temperatures, e.g. pressures within 1% of path integral Monte Carlo simulations of warm dense hydrogen, and a significant improvement over ground-state functionals. At low temperatures, f TSCAN demonstrates improvements in accuracy relative to lower-level and deorbitalized functionals, indicating that calculations using f TSCAN may be expected to perform well across experimentally relevant densities and pressures.

36 MATERIALS SCIENCE↗

Six Impossible Things: Fractional Charge From Laughlin's Wave Function

The Laughlin's wave function is found to be the zero-energy ground state of a {delta}-function Hamiltonian. The finite negative value of the ground state energy which is 91 per cent of Wigner value, can be obtained only when Coulomb correlations are introduced. The Laughlin's wave function is of short range and it overlaps with that of the exact wave functions of small (number of electrons 2 or 5) systems. (i) It is impossible to obtain fractional charge from Laughlin's wave function. (ii) It is impossible to prove that the Laughlin's wave function gives the ground state of the Coulomb Hamiltonian. (iii) It is impossible to have particle-hole symmetry in the Laughlin's wave function. (iv) It is impossible to derive the value of m in the Laughlin's wave function. The value of m in {psi}{sub m} can not be proved to be 3 or 5. (v) It is impossible to prove that the Laughlin's state is incompressible because the compressible states are also likely. (vi) It is impossible for the Laughlin's wave function to have spin. This effort is directed to explain the experimental data of quantum Hall effect in GaAs/AlGaAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accurate parameterization of the kinetic energy functional

The absence of a reliable formulation of kinetic energy density functional has hindered the development of orbital free density functional theory. Using the data-aided learning paradigm, we propose a simple prescription to accurately model the kinetic energy density of any system. Our method relies on a dictionary of functional forms for local and nonlocal contributions which have been proposed in the literature and the appropriate coefficients are calculated via a linear regression framework. To model the nonlocal contributions, we explore two new nonlocal functionals - a functional that captures fluctuations in electronic density and a functional that incorporates gradient information. Since, the analytical functional forms of the kernels present in these nonlocal terms are not known from theory, we propose a basis function expansion to model these seemingly difficult nonlocal quantities. This allows us to easily reconstruct kernels for any system using only a few structures. The proposed method is able to learn kinetic energy densities and total kinetic energies of molecular and periodic systems, such as H 2 , LiH, LiF and a one-dimensional chain of 8 hydrogens using data from Kohn-Sham density functional theory calculations for only a few structures. For the ease of reproduction, codes used to generate the models are provided in the supporting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On Some New Properties of Quaternion Functions

Quaternions discovered by W. R. Hamilton made a great contribution to the progress in noncommutative algebra and vector analysis. However, the analysis of quaternion functions has not been duly developed. The matter is that the notion of a derivative of quaternion functions of a quaternion variable has not been known until recently. The author has succeeded in improving the situation. The present work contains an account of the results obtained by him in this direction. The notion of an ℍ-derivative is introduced for quaternion functions of a quaternion variable. The existence of an ℍ-derivative of elementary functions is established retaining the well-known formulas for the corresponding functions from complex (real) analysis. The rules on the ℍ-differentiation of a sum, a product, and an inverse function are formulated and proved. Necessary and sufficient conditions for the existence of an ℍ-derivative are established. The notions of ℂ{sup 2}-differentiation and ℂ{sup 2}-holomorphy are introduced for quaternion functions of a quaternion variable. Three equivalent conditions are found, each of them being a necessary and sufficient one for ℂ{sup 2}-differentiation. Representations by an integral and a power series are given for ℂ{sup 2}-holomorphic functions. It is proved that the harmonicity of functions f(z), z · f(z), and f(z) · z is the necessary and sufficient condition for a function f to be Fueter-regular.

97 MATHEMATICS AND COMPUTING↗

Conforming window functions for meshfree methods

Window functions provide a base for the construction of approximation functions in many meshfree methods. They control the smoothness and extent of the approximation functions and are commonly defined using Euclidean distances which helps eliminate the need for a meshed discretization, simplifying model development for some classes of problems. However, for problems with complicated geometries such as nonconvex or multi-body domains, poor solution accuracy and convergence can occur unless the extents of the window functions, and thus approximation functions, are carefully controlled, often a time consuming or intractable task. Here in this paper, we present a method to provide more control in window function design, allowing efficient and systematic handling of complex geometries. “Conforming” window functions are constructed using Bernstein–Bézier splines defined on local triangulations with constraints imposed to control smoothness. Graph distances are used in conjunction with Euclidean metrics to provide adequate information for shaping the window functions. The conforming window functions are demonstrated using the Reproducing Kernel Particle Method showing improved accuracy and convergence rates for problems with challenging geometries. Conforming window functions are also demonstrated as a means to simplify the imposition of essential boundary conditions.

, rapid design-to-analysis↗

Baseline Cardiopulmonary Function as an Independent Prognostic Factor for Survival of Inoperable Non-Small-Cell Lung Cancer After Concurrent Chemoradiotherapy: A Single-Center Analysis of 161 Cases

Purpose: Little is known about the effects of cardiopulmonary function on the prognosis of concurrent chemoradiotherapy in patients with inoperable non-small-cell lung cancer (NSCLC). Methods and Materials: A retrospective analysis of the effects of tumor- and patient-related factors and parameters of cardiopulmonary function and heart morphology on the feasibility, toxicity, and prognosis was performed. Results: Cardiopulmonary function had no effect on the toxicity or feasibility of treatment; effects on survival were observed in the univariate analysis. Median survival varied as follows: cardiac function: 13.0 {+-} 1.6 months for left ventricular ejection fraction (LVEF) > 50% vs. 10.0 {+-} 1.9 months for LVEF {<=} 50% (p = 0.003); pulmonary function: 16.0 {+-} 0.6 months for no lung function deficits (vital capacity [VC]{>=} 60%, forced expiratory volume in 1 s {>=} 80%, and diffusing capacity of the lung for carbon monoxide (DLCO) {>=}60%) vs. 14.0 {+-} 1.5 months for one or two function deficits vs. 8.0 {+-} 1.5 months for three lung function deficits (p = 0.001); T stage: 19.0 {+-} 3.1 months for rcT0/cT1/cT2 vs. 12.0 {+-} 0.8 months for cT3/cT4 (p = 0.039); and age: 11.0 {+-} 1.5 months for <60 years vs. 18.0 {+-} 2.5 months for 60-69 years vs. 12.0 {+-} 1.2 months for {>=}70 years (p = 0.008). Prognostic factors identified in the multivariate analysis were LVEF {<=}50% (p = 0.043; hazard ratio [HR], 1.74), reduced pulmonary function (p = 0.001; HR, 1.71 or 5.05) and T stage (p = 0.026; HR: 1.71). Conclusions: In addition to T-stage, cardiac and pulmonary function variables affected the survival of non-small-cell lung cancer patients after chemoradiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparing the performance of density functionals in describing the adsorption of atoms and small molecules on Ni(111)

Reaction networks calculated using density functional theory (DFT) play a crucial role in understanding and predicting heterogeneous catalyst performance. However, results obtained using different density functionals can vary significantly. Accordingly, it is important to assess the accuracy of available functionals in capturing adsorption energetics derived from single-crystal adsorption microcalorimetry experiments. Here, we evaluate how different density functionals describe the molecular and dissociative adsorption of CH 3 I, the adsorption of CH 3 , I, and H, and the dissociative adsorption of CH 4 on Ni(111). First, we identify energetically-preferred adsorbed states for each adsorbate at three surface coverages and calculate the corresponding enthalpies of adsorption at 160 K. Then, we compare the results to experimental measurements published in the literature. For each adsorption process we find at least one functional that is quantitatively accurate within experimental error, but no functional is accurate (within experimental error) for all adsorption processes studied. Even when assuming an additional DFT error of ±20 kJ/mol on top of the experimental error, only the PBE-D3 and RPBE-D3 functionals are accurate for all considered adsorption systems. Overall, these results indicate that quantitative agreement between density functional theory calculations and experimental measurements is both system- and functional-dependent. Importantly, single-crystal adsorption microcalorimetry experiments will continue to play an important role for benchmarking density functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stretched hydrogen molecule from a constrained-search density-functional perspective

Constrained-search density functional theory gives valuable insights into the fundamentals of density functional theory. It provides exact results and bounds on the ground- and excited-state density functionals. An important advantage of the theory is that it gives guidance in the construction of functionals. Here they engage constrained search theory to explore issues associated with the functional behavior of 'stretched bonds' in molecular hydrogen. A constrained search is performed with familiar valence bond wavefunctions ordinarily used to describe molecular hydrogen. The effective, one-electron hamiltonian is computed and compared to the corresponding uncorrelated, Hartree-Fock effective hamiltonian. Analysis of the functional suggests the need to construct different functionals for the same density and to allow a competition among these functions. As a result the correlation energy functional is composed explicitly of energy gaps from the different functionals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

funcX: Federated Function as a Service for Science

Here, funcX is a distributed function as a service (FaaS) platform that enables flexible, scalable, and high performance remote function execution. Unlike centralized FaaS systems, funcX decouples the cloud-hosted management functionality from the edge-hosted execution functionality. funcX's endpoint software can be deployed, by users or administrators, on arbitrary laptops, clouds, clusters, and supercomputers, in effect turning them into function serving systems. funcX's cloud-hosted service provides a single location for registering, sharing, and managing both functions and endpoints. It allows for transparent, secure, and reliable function execution across the federated ecosystem of endpoints-enabling users to route functions to endpoints based on specific needs. funcX uses containers (e.g., Docker, Singularity, and Shifter) to provide common execution environments across endpoints. funcX implements various container management strategies to execute functions with high performance and efficiency on diverse funcX endpoints. funcX also integrates with an in-memory data store and Globus for managing data that may span endpoints. We motivate the need for funcX, present our prototype design and implementation, and demonstrate, via experiments on two supercomputers, that funcX can scale to more than 130000 concurrent workers. We show that funcX's container warming-aware routing algorithm can reduce the completion time for 3,000 functions by up to 61% compared to a randomized algorithm and the in-memory data store can speed up data transfers by up to 3x compared to a shared file system.

97 MATHEMATICS AND COMPUTING↗

Work functions of hafnium nitride thin films as emitter material for field emitter arrays

The work functions of hafnium nitride thin films prepared by radio-frequency magnetron sputtering were investigated in vacuum, before and after surface cleaning processes, with a view of improving the properties of as-fabricated field emitter arrays comprising hafnium nitride emitters. The measurement of the work function was first performed for the as-deposited films and then for films subjected to surface cleaning process, either thermal treatment or ion bombardment. Thermal treatment at a maximum temperature of 300 °C reduced the work function by 0.7 eV. Once the film was heated, the work function maintained the reduced value, even after cooling to room temperature. A little change in the work function was observed for the second and third thermal treatments. The ion bombardment was conducted by exposing the sample to a thin plasma for different sample bias conditions and processing times. When the sample was biased at −10 V, the work function decreased by 0.6 eV. The work function reduction became saturated in the early stage of the ion bombardment. When the sample was biased at −50 V, the work function exhibited different behaviors, that is, first it decreased rapidly and then increased in response to the increase in processing time. The lowest attainable work function was found to be 4.00 eV. It should be noted that none of the work function values reported in this paper were obtained using surfaces that were demonstrated to be free from oxygen contamination. The present results suggest that the current–voltage characteristics of a field emitter array can be improved by a factor of 25–50 by the examined postprocesses.

36 MATERIALS SCIENCE↗

Energy-efficient specialization of functional units in a Coarse-Grained Reconfigurable Array

Functional units provide the backbone of any spatial accelerator by providing the computing resources. The desire for having rich and expensive functional units is in tension with producing a regular and energy-efficient computing fabric. This paper explores the design trade-off between complex, universal functional units and simpler, limited functional units. We show that a modest amount of specialization reduces the area-delay-energy product of an optimized architecture to 0.86x a baseline architecture. Furthermore, we provide a design guideline that allows an architect to customize the contents of the computing fabric just by examining the profile of benchmarks within the application domains. Functional units are the core of compute-intensive spatial accelerators. They perform the computation of interest with support from local storage and communication structures. Ideally, the functional units will provide rich functionality, supporting operations ranging from simple addition, to fused multiply-adds, to advanced transcendental functions and domain specific operations like add-compare-select. However, the total opportunity cost to support the more complex operations is a function of the cost of the hardware, the rate of occurrence of the operation in the application domain, and the inefficiency of emulating the operation with simpler operators. Examples of operations that are typically emulated in spatial accelerators are division and trigonometric functions, which can be solved using table-lookup based algorithms and the CORDIC algorithm. One reason to avoid having direct hardware support for complex operations in a tiled architecture like a Coarse-Grained Reconfigurable Array (CGRA) is that the expensive hardware will typically need to be replicated in some or all of the architecture's tiles. Tiled architecture are designed such that their tiles are either homogeneous or heterogeneous. Homogeneous architectures are simpler to design but heterogeneous architectures can be more efficient. Generally, CGRAs try to support a rich set of operations with the smallest possible set of hardware devices.

97 MATHEMATICS AND COMPUTING↗