Search NASA⌕ Search

SEARCH · Search NASA

Results for “Functional coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Mitogen-activated protein kinase 6 negatively regulates secondary wall biosynthesis by modulating MYB46 protein stability in Arabidopsis thaliana

The R2R3-MYB transcription factor MYB46 functions as a master switch for secondary cell wall biosynthesis, ensuring the exquisite expression of the secondary wall biosynthetic genes in the tissues where secondary walls are critical for growth and development. At the same time, suppression of its function is needed when/where formation of secondary walls is not desirable. Little is known about how this opposing control of secondary cell wall formation is achieved. We used both transient and transgenic expression of MYB46 and mitogen-activated protein kinase 6 (MPK6) to investigate the molecular mechanism of the post-translational regulation of MYB46. We show that MYB46 is phosphorylated by MPK6, leading to site specific phosphorylation-dependent degradation of MYB46 by the ubiquitin-mediated proteasome pathway. In addition, the MPK6-mediated MYB46 phosphorylation was found to regulate in planta secondary wall forming function of MYB46. Furthermore, we provide experimental evidences that MYB83, a paralog of MYB46, is not regulated by MPK6. The coupling of MPK signaling to MYB46 function provides insights into the tissue- and/or condition-specific activity of MYB46 for secondary wall biosynthesis.

59 BASIC BIOLOGICAL SCIENCES↗

An equilibrium model for the coupled ocean-atmosphere boundary layer in the tropics

An atmospheric convective boundary layer (CBL) model is coupled to an ocean mixed-layer (OML) model in order to study the equilibrium state of the coupled system in the tropics, particularly in the Pacific region. The equilibrium state of the coupled system is solved as a function of sea-surface temperature (SST) for a given surface wind and as a function of surface wind for a given SST. It is noted that in both cases, the depth of the CBL and OML increases and the upwelling below the OML decreases, corresponding to either increasing SST or increasing surface wind. The coupled ocean-atmosphere model is solved iteratively as a function of surface wind for a fixed upwelling and a fixed OML depth, and it is observed that SST falls with increasing wind in both cases. Realistic gradients of mixed-layer depth and upwelling are observed in experiments with surface wind and SST prescribed as a function of longitude.

Sui, C.-H.↗

Computational Thermochemistry of Jet Fuels and Rocket Propellants

The design of new high-energy density molecules as candidates for jet and rocket fuels is an important goal of modern chemical thermodynamics. The NASA Glenn Research Center is home to a database of thermodynamic data for over 2000 compounds related to this goal, in the form of least-squares fits of heat capacities, enthalpies, and entropies as functions of temperature over the range of 300 - 6000 K. The chemical equilibrium with applications (CEA) program written and maintained by researchers at NASA Glenn over the last fifty years, makes use of this database for modeling the performance of potential rocket propellants. During its long history, the NASA Glenn database has been developed based on experimental results and data published in the scientific literature such as the standard JANAF tables. The recent development of efficient computational techniques based on quantum chemical methods provides an alternative source of information for expansion of such databases. For example, it is now possible to model dissociation or combustion reactions of small molecules to high accuracy using techniques such as coupled cluster theory or density functional theory. Unfortunately, the current applicability of reliable computational models is limited to relatively small molecules containing only around a dozen (non-hydrogen) atoms. We propose to extend the applicability of coupled cluster theory- often referred to as the 'gold standard' of quantum chemical methods- to molecules containing 30-50 non-hydrogen atoms. The centerpiece of this work is the concept of local correlation, in which the description of the electron interactions- known as electron correlation effects- are reduced to only their most important localized components. Such an advance has the potential to greatly expand the current reach of computational thermochemistry and thus to have a significant impact on the theoretical study of jet and rocket propellants.

Crawford, T. Daniel↗

A First Comparison of Millimeter Continuum and Mg ii Ultraviolet Line Emission from the Solar Chromosphere

We present joint observations of the Sun by the Atacama Large Millimeter/submillimeter Array (ALMA) and the Interface Region Imaging Spectrograph ( IRIS ). Both millimeter/submillimeter- λ continuum emission and ultraviolet (UV) line emission originate from the solar chromosphere and both have the potential to serve as powerful and complementary diagnostics of physical conditions in this enigmatic region of the solar atmosphere. The observations were made of a solar active region on 2015 December 18 as part of the ALMA science verification effort. A map of the Sun’s continuum emission was obtained by ALMA at a wavelength of 1.25 mm (239 GHz). A contemporaneous map was obtained by IRIS in the Mg ii h doublet line at 2803.5 Å. While a clear correlation between the 1.25 mm brightness temperature T{sub B} and the Mg ii h line radiation temperature T {sub rad} is observed, the slope is <1, perhaps as a result of the fact that these diagnostics are sensitive to different parts of the chromosphere and that the Mg ii h line source function includes a scattering component. There is a significant difference (35%) between the mean T{sub B} (1.25 mm) and mean T {sub rad} (Mg ii). Partitioning the maps into “sunspot,” “quiet areas,” and “plage regions” we find the relation between the IRIS Mg ii h line T {sub rad} and the ALMA T {sub B} region-dependent. We suggest this may be the result of regional dependences of the formation heights of the IRIS and ALMA diagnostics and/or the increased degree of coupling between the UV source function and the local gas temperature in the hotter, denser gas in plage regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Wave functions and mass spectrum for a system of two relativistic spinor quarks coupled by a chromodynamical interaction

Exact solutions of relativistic quasipotential equations in the configuration representation were found for a system of two spin-1/2 quarks interacting via a Coulomb-like chromodynamical potential. Quantization conditions were found for the pseudoscalar, pseudovector, and vector cases. The present analysis was performed within the Hamiltonian formulation of quantum field theory via a transition to the relativistic configuration representation for the case of two relativistic spin-1/2 quarks of equal mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fully coupled simulation of cosmic reionization. II. Recombinations, clumping factors, and the photon budget for reionization

We use a fully coupled cosmological simulation including dark matter dynamics, multispecies hydrodynamics, nonequilibrium chemical ionization, flux-limited diffusion radiation transport, and a parameterized model of star formation and feedback (thermal and radiative) to investigate the epoch of hydrogen reionization in detail. In this paper, the first of several application papers, we investigate the mechanics of reionization from stellar sources forming in high-z galaxies, the utility of various formulations for the gas clumping factor on accurately estimating the effective recombination time in the intergalactic medium (IGM), and the photon budget required to achieve reionization. We also test the accuracy of the static and time-dependent models of Madau et al. as predictors of reionization completion/maintenance. We simulate a WMAP7 ΛCDM cosmological model in a 20 comoving Mpc cube, resolved with 800{sup 3} uniform fluid cells and dark matter particles. By tuning our star formation recipe to approximately match the observed high-redshift star formation rate density and galaxy luminosity function, we have created a fully coupled radiation hydrodynamical realization of hydrogen reionization, which begins to ionize at z ≈ 10 and is completed at z ≈ 5.8 without further tuning. We find that roughly two ionizing photons per H atom are required to convert the neutral IGM to a highly ionized state. After reionization concludes, we find that the quantity n-dot{sub ion}×(1 Gyr)/n{sub H} is ∼9 at z = 5, in rough agreement with measurements of the ionizing emissivity by Becker and Bolton. The complicated events during reionization that lead to this number can be generally described as inside-out, but in reality, the narrative depends on the level of ionization of the gas one attributes as being ionized. We find that the formula for the ionizing photon production rate needed to maintain the IGM in an ionized state derived by Madau et al. should not be used to predict the epoch of reionization completion because it ignores history-dependent terms in the global ionization balance which are not ignorable. We find that the time-dependent model for the ionized volume fraction Q{sub HII} is more predictive, but overestimates the redshift of reionization completion z{sub reion} by Δz ≈ 1. We propose a revised formulation of the time-dependent model that agrees with our simulation to a few percent accuracy. Finally, we use our simulation data to measure the absorption of ionizing radiation due to circumgalactic gas resolved on our mesh and find f-bar{sub esc}(CGM)≈0.7.

79 ASTRONOMY AND ASTROPHYSICS↗

Coupling Between Waveguide-Fed Slot Arrays

Coupling between two waveguide-fed planar slot arrays has been investigated using full-wave analysis. The analysis employs the method-of-moments solution to the pertinent coupled integral equations for the aperture electric field of all slots. In order to compute coupling between two arrays, the input port of the first array is excited with a TE(sub 10) mode wave while the second one is match-terminated. After solving the moment method matrix equations, the aperture fields of all slots are obtained and thereby the TE(sub 10) mode wave received at the input port of the second array is determined. Coupling between two arrays is the ratio of the wave amplitude arriving in the second array port to the incident wave amplitude at the first array port. The coupling mechanism has been studied as a function of spacing between arrays in different directions, e.g. the electric field plane, the magnetic field plane, and the diagonal plane. Computed coupling values are presented for different array geometries. This work is novel since it provides a good understanding of coupling between waveguide-fed slot arrays as a function of spacing and orientation for different aperture distributions and array architectures. This serves as a useful tool for antenna design engineers and system engineers.

Rengarajan, Sembiam↗

Thermal conductivity of α -U with point defects

Here, we develop a theoretical model for thermal conductivity of α-U that combines density functional theory calculations and the coupled electron–phonon Boltzmann transport equation. The model incorporates both electron and phonon contributions to thermal conductivity and achieves good agreement with experimental data over a wide temperature range. The dominant scattering mechanism governing thermal transport in α-U at different temperatures is examined. By including phonon–defect and electron–defect scatterings in the model, we study the effect of point defects including U-vacancy, U-interstitial, and Zr-substitution on the thermal conductivity of α-U. The degradation of anisotropic thermal conductivity due to point defects as a function of defect concentration, defect type, and temperature is reported. This model provides insights into the impact of defects on both phonon and electron thermal transport. It will promote the fundamental understanding of thermal transport in α-U and provide a ground for investigation of coupled electron–phonon transport in metallic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of parameters in Indus-2 synchrotron radiation source

The paper presents the measurement of optics parameters in Indus-2 synchrotron radiation source, which include betatron tune, beta function, dispersion function, natural chromaticity, corrected chromaticity, central RF frequency, momentum compaction factor, and linear betatron coupling. Two methods were used for beta function measurement; a conventional quadrupole scan method and a method using the fitting of the orbit response matrix. A robust Levenberg-Marquardt algorithm was used for nonlinear least square fitting of the orbit response matrix. In this paper, detailed methods for the parameter measurements are described. The measured results are discussed and compared with the theoretical values obtained using accelerator simulation code Accelerator Toolbox in MATLAB.

43 PARTICLE ACCELERATORS↗

Edge-Functionalized Graphene Nanoribbon Encapsulation To Enhance Stability and Control Kinetics of Hydrogen Storage Materials

Hydrogen is a long-term clean energy carrier that enables completely carbon-free energy production. However, practical implementation of hydrogen fuel technologies is restricted because of lack of safe and high-performing storage materials. Here, we report Mg nanocrystals encapsulated by narrow, bottom-up synthesized graphene nanoribbons (GNRs) as environmentally stable and high-capacity hydrogen storage materials. As an encapsulation medium, GNRs offer similar functionalities as reduced graphene oxide to protect the encapsulated Mg nanocrystals from extensive oxidation, while allowing penetrations of hydrogen. In addition, the GNRs can be edge functionalized to tune the (de-)hydrogenation kinetics, in particular for the processes occurred at the GNR–Mg interfaces. In this work, four different types of edge-functional groups were introduced into GNRs with the goal of comparing their cycling performances because of edge functionalization. On the basis of detailed kinetic analysis coupled with first-principles calculations, we propose that edge-functional groups can contribute to the reduction of kinetic barriers for surface hydrogen reactions at the interface with the GNR by stabilizing surface defects. Furthermore, the GNR–Mg composite exhibited higher hydrogen storage capacity (7.1 wt % of hydrogen based on the total composite) compared with the current literature while demonstrating long-term air stability. This work suggests that the rational design of edge-functional groups in graphene derivatives can provide a general and novel paradigm for simultaneous encapsulation and hydrogen storage catalysis in simple metal or complex metal nanocrystals.

08 HYDROGEN↗

Superconductivity at 28 K in CaB{sub 3}C{sub 3} predicted from first-principles

The structural parameters, electronic properties, and superconducting state in the graphite-like B{sub x}C{sub 1−x} intercalation compound, CaB{sub 3}C{sub 3}, have been studied using pseudopotential density functional theory within the generalized gradient approximation. Electronic and electron–phonon coupling calculations reveal that CaB{sub 3}C{sub 3} is hole conducting and superconducting with critical temperature 28.2 K, which is much higher than that of CaC{sub 6} (11.5 K). The excellent superconducting state in CaB{sub 3}C{sub 3} stems from the simultaneous presence of highly mobile and extremely confined conduction electrons, which enhances electron pairing and superconductivity. The current calculations might stimulate further theoretical and experimental investigation in search of new superconducting states in graphite-like B{sub x}C{sub 1−x} intercalated compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weakly coupled alternating S = 1 2 chains in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6

Spin- 1 2 chains with alternating antiferromagnetic (AF) and ferromagnetic (FM) couplings exhibit quantum entanglement as the integer-spin Haldane chains and might be similarly utilized for quantum computations. Such alternating AF-FM chains have been proposed to be realized in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6 , but to confirm this picture a comprehensive understanding of the exchange interactions including terms outside of the idealized model is required. Here, we employ neutron scattering to study the spin dynamics in Na 2 Cu 2 TeO 6 and accurately determine the coupling strengths through the random phase approximation and density functional theory approaches. We find the AF and FM intrachain couplings are the dominant terms in the spin Hamiltonian, while the interchain couplings are AF but perturbative. This hierarchy in the coupling strengths and the alternating signs of the intrachain couplings can be understood through their different exchange paths. Our results establish Na 2 Cu 2 TeO 6 as a weakly coupled alternating AF-FM chain compound and reveal the robustness of the gapped ground state in alternating chains under weak interchain couplings.

1-dimensional spin chains↗

Dynamic structural disorder in supported nanoscale catalysts

We investigate the origin and physical effects of “dynamic structural disorder” (DSD) in supported nano-scale catalysts. DSD refers to the intrinsic fluctuating, inhomogeneous structure of such nano-scale systems. In contrast to bulk materials, nano-scale systems exhibit substantial fluctuations in structure, charge, temperature, and other quantities, as well as large surface effects. The DSD is driven largely by the stochastic librational motion of the center of mass and fluxional bonding at the nanoparticle surface due to thermal coupling with the substrate. Our approach for calculating and understanding DSD is based on a combination of real-time density functional theory/molecular dynamics simulations, transient coupled-oscillator models, and statistical mechanics. This approach treats thermal and dynamic effects over multiple time-scales, and includes bond-stretching and -bending vibrations, and transient tethering to the substrate at longer ps time-scales. Potential effects on the catalytic properties of these clusters are briefly explored. Model calculations of molecule-cluster interactions and molecular dissociation reaction paths are presented in which the reactant molecules are adsorbed on the surface of dynamically sampled clusters. This model suggests that DSD can affect both the prefactors and distribution of energy barriers in reaction rates, and thus can significantly affect catalytic activity at the nano-scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control Co-Design of Wind Turbines

Wind energy is recognized worldwide as cost-effective and environmentally friendly, and it is among the fastest-growing sources of electrical energy. To further decrease the cost of wind energy, wind turbines are being designed at ever-larger scales. To expand the deployment of wind energy, wind turbines are also being designed on floating platforms for placement in deep-water locations offshore. Both larger-scale and floating wind turbines pose challenges because of their greater structural loads and deflections. Complex, large-scale systems such as modern wind turbines increasingly require a control co-design approach, whereby the system design and control design are performed in a more integrated fashion. This article reviews recent developments in control co-design of wind turbines. We provide an overview of wind turbine design objectives and constraints, issues in the design of key wind turbine components, modeling of the wind turbine and environment, and controller coupling issues. Wind turbine control functions and the integration of control design in co-design are detailed with a focus on co-design compatible control approaches.

17 WIND ENERGY↗

Ensemble averaged structure–function relationship for nanocrystals: effective superparamagnetic Fe clusters with catalytically active Pt skin [Ensemble averaged structure-function relationship for composite nanocrystals: magnetic bcc Fe clusters with catalytically active fcc Pt skin]

Practical applications require the production and usage of metallic nanocrystals (NCs) in large ensembles. Besides, due to their cluster-bulk solid duality, metallic NCs exhibit a large degree of structural diversity. This poses the question as to what atomic-scale basis is to be used when the structure–function relationship for metallic NCs is to be quantified precisely. In this paper, we address the question by studying bi-functional Fe core-Pt skin type NCs optimized for practical applications. In particular, the cluster-like Fe core and skin-like Pt surface of the NCs exhibit superparamagnetic properties and a superb catalytic activity for the oxygen reduction reaction, respectively. We determine the atomic-scale structure of the NCs by non-traditional resonant high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Using the experimental structure data we explain the observed magnetic and catalytic behavior of the NCs in a quantitative manner. Lastly, we demonstrate that NC ensemble-averaged 3D positions of atoms obtained by advanced X-ray scattering techniques are a very proper basis for not only establishing but also quantifying the structure–function relationship for the increasingly complex metallic NCs explored for practical applications.

36 MATERIALS SCIENCE↗

Symmetric and asymmetric solitons trapped in H-shaped potentials

We report results of numerical and analytical studies of the spontaneous symmetry breaking in solitons, both two- and one-dimensional (2D and 1D), which are trapped in H-shaped potential profiles built of two parallel potential troughs linked by a narrow rung in the transverse direction. This system can be implemented in self-attractive Bose-Einstein condensates (BECs), as well as in a nonlinear bulk optical waveguide. We demonstrate that the introduction of the transverse link changes the character of the symmetry-breaking bifurcation (SBB) in the system from subcritical to supercritical. (In terms of the corresponding phase transition, it is a change between the first and second kinds.) A noteworthy feature of the SBB in this setting is a nonmonotonous dependence of the soliton's norm at the bifurcation point on the strength of the transverse link. In the full 2D system, the results are obtained in a numerical form. An exact analytical solution is found for the bifurcation in the 1D version of the model, with the transverse rung modeled by the local linear coupling between the parallel troughs with the {delta}-functional longitudinal profile. By replacing the {delta} function by its finite-width Gaussian counterpart, similar results are obtained by means of the variational approximation (VA). The VA is also applied to the 1D system with a mixed linear and nonlinear transverse localized coupling. Comparison of the results produced by the different varieties of the system clearly reveals basic features of its the symmetry-breaking transition.

74 ATOMIC AND MOLECULAR PHYSICS↗

First-principles study of the α - ω phase transformation in Ti and Zr coupled to slip modes

Here, we present first-principles density functional theory calculations to study the α-ω phase transformation in Ti and Zr and its coupling to slip modes of the two phases. We first investigate the relative energetics of all possible slip systems in the α and ω phases to predict the dominant slip system that is activated during a plastic deformation under an arbitrary load. Using this and the crystallographic orientation relationships between α and ω phases, we construct low energy α/ω interfaces and study the energetics of the slip system at the interface between α and ω to compare to the slip systems in the bulk phases. We find that for a particular crystallographic orientation relationship, where (basal) α ∥ (prismatic–II) ω , and [a] α ∥ [c] ω , the slip at the interface is preferred compared to its bulk counterparts. This implies that the plastically deformed α/ω phase with this orientation relationship prefers to retain the interface (or coexisting phases) than transforming back to the pure phase after unloading. This is consistent with the observation that the ω-phase is retained in samples loaded in flyer plate experiments or under high-pressure torsion. Furthermore, calculation of the energy barrier for α to ω phase transformation as a function of glide at the α/ω interface shows significant coupling between the α-ω phase transformation and slip modes in Ti and Zr.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗