Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Investigation of N 2 /O 2 plasma interaction with Pt-catalyst: effect of metastable adsorbates on product hysteresis

The coupling of catalysts and atmospheric-pressure plasma has the potential to improve the efficiency of certain catalytic reactions. Understanding the changes that the catalyst surface undergoes during exposure to plasma is key to improving plasma–catalytic performance. In this work, long term exposure of Pt–Al 2 O 3 powder catalyst to an Ar/N 2 /O 2 non-equilibrium atmospheric-pressure plasma-jet was investigated. Products produced by the interaction were analyzed downstream with Fourier-transform infrared spectroscopy while surface species were analyzed operandi with diffuse reflectance infrared Fourier transform spectroscopy. During exposure, the catalyst temperature was ramped cyclically between 100 °C and 350 °C to understand how substrate temperature affects the plasma–catalyst interaction. Long-lasting changes were revealed to take place on the catalyst surface during plasma exposure. At low temperatures, Pt–O and Pt–NO accumulate on the surface which react at elevated temperatures to form NO 2 . NO 2 initially appears to spill on to the Al 2 O 3 support as nitrites and nitrates instead of desorbing. Stable surface conditions are only achieved after prolonged plasma exposure, when nitrate sites on the Al 2 O 3 support are filled. By changing the catalyst temperature at various rates, the impact of total plasma species flux to the surface was analyzed. It was found that decreasing the heating rate increased the hysteresis in the pattern of NO 2 formation during thermal cycling. The variation with temperature demonstrates that plasma exposure results in a buildup of surface NO x and oxygen species which react or desorb at high temperatures. The observed changes are discussed from the generic viewpoint that a non-equilibrium plasma interacting with a catalyst at low temperature introduces metastable steady-state surface conditions. Upon heating above a threshold temperature, the introduced surface modifications can change either due to thermal effects, or, for a plasma environment, by additional interaction with the incident plasma species flux. The surface/material changes take place in a highly predictable fashion and after sufficient time above the threshold temperature reach a steady-state condition that is different from the transient behavior that is observed during initial heating. During cooling the plasma-surface interaction exhibits a different behavior than during heating, and this results in hysteresis of diverse observables. The metastability/hysteresis description appears quite generic and analogous to hysteresis behavior seen for different systems. Furthermore, it is expected to be useful for understanding the consequences of plasma–catalyst surface interactions for various systems.

36 MATERIALS SCIENCE↗

Boltzmann hierarchy for interacting neutrinos I: formalism

Starting from the collisional Boltzmann equation, we derive for the first time and from first principles the Boltzmann hierarchy for neutrinos including interactions with a scalar particle. Such interactions appear, for example, in majoron-like models of neutrino mass generation. We study two limits of the scalar mass: (i) An extremely massive scalar whose only role is to mediate an effective 4-fermion neutrino-neutrino interaction, and (ii) a massless scalar that can be produced in abundance and thus demands its own Boltzmann hierarchy. In contrast to, e.g., the first-order Boltzmann hierarchy for Thomson-scattering photons, our interacting neutrino/scalar Boltzmann hierarchies contain additional momentum-dependent collision terms arising from a non-negligible energy transfer in the neutrino-neutrino and neutrino-scalar interactions. This necessitates that we track each momentum mode of the phase space distributions individually, even if the particles were massless. Comparing our hierarchy with the commonly used (c{sub eff}{sup 2},c{sub vis}{sup 2})-parameterisation, we find no formal correspondence between the two approaches, which raises the question of whether the latter parameterisation even has an interpretation in terms of particle scattering. Lastly, although we have invoked majoron-like models as a motivation for our study, our treatment is in fact generally applicable to all scenarios in which the neutrino and/or other ultrarelativistic fermions interact with scalar particles.

79 ASTRONOMY AND ASTROPHYSICS↗

A multidimensional perspective on microbial interactions

Beyond being simply positive or negative, beneficial or inhibitory, microbial interactions can involve a diverse set of mechanisms, dependencies and dynamical properties. These more nuanced features have been described in great detail for some specific types of interactions, (e.g. pairwise metabolic cross-feeding, quorum sensing or antibiotic killing), often with the use of quantitative measurements and insight derived from modeling. With a growing understanding of the composition and dynamics of complex microbial communities for human health and other applications, we face the challenge of integrating information about these different interactions into comprehensive quantitative frameworks. Here, we review the literature on a wide set of microbial interactions, and explore the potential value of a formal categorization based on multidimensional vectors of attributes. We propose that such an encoding can facilitate systematic, direct comparisons of interaction mechanisms and dependencies, and we discuss the relevance of an atlas of interactions for future modeling and rational design efforts.

59 BASIC BIOLOGICAL SCIENCES↗

Discretized versus continuous models of p-wave interacting fermions in one dimension

We present a general mapping between continuous and lattice models of Bose and Fermi gases in one dimension, interacting via local two-body interactions. For s-wave interacting bosons we arrive at the Bose-Hubbard model in the weakly interacting, low-density regime. The dual problem of p-wave interacting fermions is mapped to the spin-1/2 XXZ model close to the critical point in the highly polarized regime. The mappings are shown to be optimal in the sense that they produce the least error possible for a given discretization length. As an application we examine the ground state of an interacting Fermi gas in a harmonic trap, calculating numerically real-space and momentum-space distributions as well as two-particle correlations. In the analytically known limits the convergence of the results of the lattice model with the continuous one is shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing chiral interactions up to next-to-next-to-next-to-leading order in medium-mass nuclei

Here, we study ground-state energies and charge radii of closed-shell medium-mass nuclei based on novel chiral nucleon-nucleon (NN) and three-nucleon (3⁢𝑁) interactions, with a focus on exploring the connections between finite nuclei and nuclear matter. To this end, we perform in-medium similarity renormalization group (IM-SRG) calculations based on chiral interactions at next-to-leading order (NLO), N 2 ⁢LO, and N 3 ⁢LO, where the 3⁢𝑁 interactions at N 2⁢ LO and N 3 ⁢LO are fit to the empirical saturation point of nuclear matter and to the triton binding energy. Our results for energies and radii at N 2 ⁢LO and N 3 ⁢LO overlap within uncertainties, and the cutoff variation of the interactions is within the EFT uncertainty band. We find underbound ground-state energies, as expected from the comparison to the empirical saturation point. The radii are systematically too large, but the agreement with experiment is better. We further explore variations of the 3⁢𝑁 couplings to test their sensitivity in nuclei. While nuclear matter at saturation density is quite sensitive to the 3⁢𝑁 couplings, we find a considerably weaker dependence in medium-mass nuclei. In addition, we explore a consistent momentum-space SRG evolution of these NN and 3⁢𝑁 interactions, exhibiting improved many-body convergence. For the SRG-evolved interactions, the sensitivity to the 3⁢𝑁 couplings is found to be stronger in medium-mass nuclei.

ab initio calculations↗

Effective interactions in the s d shell

We perform here a quantitative study of the microscopic effective shell-model interactions in the valence sd shell, obtained from modern nucleon-nucleon potentials, chiral N3LO, JISP16 and Daejeon16, using No-Core Shell-Model wave functions and the Okubo-Lee-Suzuki transformation. We investigate the monopole properties of those interactions in comparison with the phenomenological universal sd-shell interaction, USDB. Theoretical binding energies and low-energy spectra of O isotopes and of selected sd-shell nuclei, are presented. We conclude that there is a noticeable improvement in the quality of the effective interaction when it is derived from the Daejeon16 potential. We show that its proton-neutron centroids are consistent with those from USDB. We then propose monopole modifications of the Daejeon16 centroids in order to provide an adjusted interaction yielding significantly improved agreement with the experiment. A spin-tensor decomposition of two-body effective interactions is applied in order to extract more information on the structure of the centroids and to understand the reason for deficiencies arising from our current theoretical approximations. The concern of the possible role of the three-nucleon forces is addressed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of the isovector-scalar channel interaction on neutron star matter with hyperons and antikaon condensation

The relativistic mean field approach including isovector-scalar channel (i.e., exchanging {delta} mesons) interaction is taken to study the properties of neutron star matter including hyperons and antikaon condensation. For hyperonic neutron stars, it shows that the {delta}-meson channel interaction stiffens the equation of state at lower densities but it softens the equation of state after hyperons appear. This leads to the neutron star having a lower central density and a larger radius than the one with the same mass but without the {delta}-meson channel interaction. For neutron star matter including both hyperons and antikaon condensation, the {delta}-meson channel interaction increases the onset density of the antikaon condensation. At the same time, the stability of the kaonic neutron star and its dependence on the kaon optical potential are discussed. For stable kaonic neutron stars with larger radii, those with the inclusion of the {delta}-meson channel interaction have larger masses than those without the {delta}-meson interaction, but the result is reversed for those with smaller radii. Calculated results are also compared with neutron star observations. Constraints on the model parameters are then provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structure of the SPRY domain of the human RNA helicase DDX1, a putative interaction platform within a DEAD-box protein

The structure of the SPRY domain of the human RNA helicase DDX1 was determined at 2.0 Å resolution. The SPRY domain provides a putative protein–protein interaction platform within DDX1 that differs from other SPRY domains in its structure and conserved regions. The human RNA helicase DDX1 in the DEAD-box family plays an important role in RNA processing and has been associated with HIV-1 replication and tumour progression. Whereas previously described DEAD-box proteins have a structurally conserved core, DDX1 shows a unique structural feature: a large SPRY-domain insertion in its RecA-like consensus fold. SPRY domains are known to function as protein–protein interaction platforms. Here, the crystal structure of the SPRY domain of human DDX1 (hDSPRY) is reported at 2.0 Å resolution. The structure reveals two layers of concave, antiparallel β-sheets that stack onto each other and a third β-sheet beneath the β-sandwich. A comparison with SPRY-domain structures from other eukaryotic proteins showed that the general β-sandwich fold is conserved; however, differences were detected in the loop regions, which were identified in other SPRY domains to be essential for interaction with cognate partners. In contrast, in hDSPRY these loop regions are not strictly conserved across species. Interestingly, though, a conserved patch of positive surface charge is found that may replace the connecting loops as a protein–protein interaction surface. The data presented here comprise the first structural information on DDX1 and provide insights into the unique domain architecture of this DEAD-box protein. By providing the structure of a putative interaction domain of DDX1, this work will serve as a basis for further studies of the interaction network within the hetero-oligomeric complexes of DDX1 and of its recruitment to the HIV-1 Rev protein as a viral replication factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Multiple Inverter Volt-VAR Control Interactions with Realistic Grid Impedances

Integration of large numbers of distributed photovoltaic (PV) systems in electric distribution circuits often requires advanced functions (e.g. volt-VAR, frequency-Watt etc.). However, significant concerns have been raised about potential for PV inverters with such controls to interact with one another in a way that could cause grid instability. The lack of standardized inverter models makes it hard to simulate such transient interactions in software. Similarly it is very hard to test these dynamic inverter interactions in the laboratory. In this paper, unique Power Hardware-in-the-Loop (PHIL) techniques are presented to experimentally test for interactions of multiple PV inverters connected to multiple points-of-common-coupling (PCCs) with grid impedances between them. Sample test results are provided from simulation-only scenarios and PHIL testing. Though simulation results indicated possible harmful interactions between inverters' volt-VAR controllers; no such interactions were found in the limited hardware testing.

14 SOLAR ENERGY↗

Potential of the neutron lloyd's mirror interferometer for the search for new interactions

We discuss the potential of the neutron Lloyd's mirror interferometer in a search for new interactions at small scales. We consider three hypothetical interactions that may be tested using the interferometer. The chameleon scalar field proposed to solve the enigma of accelerating expansion of the Universe produces interaction between particles and matter. The axion-like spin-dependent coupling between a neutron and nuclei or/and electrons may result in a P- and T-noninvariant interaction with matter. Hypothetical non-Newtonian gravitational interactions mediates an additional short-range potential between neutrons and bulk matter. These interactions between the neutron and the mirror of a Lloyd-type neutron interferometer cause a phase shift of neutron waves. We estimate the sensitivity and systematic effects of possible experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Systematic comparison of barriers for heavy-ion fusion calculated on the basis of the double-folding model by employing two versions of nucleon–nucleon interaction

A systematic calculation of barriers for heavy-ion fusion was performed on the basis of the double-folding model by employing two versions of an effective nucleon–nucleon interaction: M3Y interaction and Migdal interaction. The results of calculations by the Hartree–Fockmethod with the SKX coefficients were taken for nuclear densities. The calculations reveal that the fusion barrier is higher in the case of employing theMigdal interaction than in the case of employing the М3Y interaction. In view of this, the use of the Migdal interaction in describing heavy-ion fusion is questionable.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phenomenological description of relativistic-quark interaction on the basis of the Dirac equation with the Cornell potential

Relativistic-quark interaction is described phenomenologically on the basis of the Dirac equation with the Cornell potential. A general form of the initial equation involving the vector and scalar components of the Cornell potential is used for the case of an arbitrary relation between them. The Hamiltonian in the Foldy–Wouthuysen representation is derived in a general form with allowance for electromagnetic interaction. In contrast to earlier investigations, it is relativistic and exact for the zeroth- and first-order terms in the Planck constant and also for those second-order terms that describe contact interactions. General quantum-mechanical equations of motion for the momentum and spin are derived, and the classical limit of the Hamiltonian and for the equations of motion is found for the first time. A relation between the angular velocity of quark spin precession and the force acting on the quark is obtained. The energy of spin–orbit interaction is rather high (on the order of 100 MeV). Terms that describe spin–orbit and contact interactions have opposite signs for the vector and scalar components of the Cornell potential. The evolution of the quark helicity and the spin–spin interaction of the quarks are also calculated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of the New CNDV Option of the Community Land Model: Effects of Dynamic Vegetation and Interactive Nitrogen on CLM4 Means and Variability

The Community Land Model, version 4 (CLM4) includes the option to run the prognostic carbon–nitrogen (CN) model with dynamic vegetation (CNDV). CNDV, which simulates unmanaged vegetation, modifies the CN framework to implement plant biogeography updates. CNDV simulates a reasonable present-day distribution of plant functional types but underestimates tundra vegetation cover. The CNDV simulation is compared against a CN simulation using a vegetation distribution generated by CNDV and against a carbon-only simulation with prescribed nitrogen limitation (CDV). The comparisons focus on the means and variability of carbon pools and fluxes and biophysical factors, such as albedo, surface radiation, and heat fluxes. The study assesses the relative importance of incorporating interactive nitrogen (CDV to CNDV) versus interactive biogeography (CN to CNDV) in present-day equilibrium simulations. None of the three configurations performs consistently better in simulating carbon or biophysical variables compared to observational estimates. The interactive nitrogen ( N ) cycle reduces annual means and interannual variability more than dynamic vegetation. Dynamic vegetation reduces seasonal variability in leaf area and, therefore, in moisture fluxes and surface albedo. The interactive N cycle has the opposite effect of enhancing seasonal variability in moisture fluxes and albedo. CNDV contains greater degrees of freedom than CN or CDV by adjusting both through nitrogen–carbon interactions and through vegetation establishment and mortality. Thus, in these equilibrium simulations, CNDV acts as a stronger “regulator” of variability compared to the other configurations. To conclude, discussed are plausible explanations for this behavior, which has been shown in past studies to improve climate simulations through better represented climate–vegetation interactions.

54 ENVIRONMENTAL SCIENCES↗

Quantitative high-throughput screening assays for the discovery and development of SIRPα-CD47 interaction inhibitors

CD47 is an immune checkpoint molecule that downregulates key aspects of both the innate and adaptive anti-tumor immune response via its counter receptor SIRPα, and it is expressed at high levels in a wide variety of tumor types. This has led to the development of biologics that inhibit SIRPα engagement including humanized CD47 antibodies and a soluble SIRPα decoy receptor that are currently undergoing clinical trials. Unfortunately, toxicological issues, including anemia related to on-target mechanisms, are barriers to their clinical advancement. Another potential issue with large biologics that bind CD47 is perturbation of CD47 signaling through its high-affinity interaction with the matricellular protein thrombospondin-1 (TSP1). One approach to avoid these shortcomings is to identify and develop small molecule molecular probes and pretherapeutic agents that would (1) selectively target SIRPα or TSP1 interactions with CD47, (2) provide a route to optimize pharmacokinetics, reduce on-target toxicity and maximize tissue penetration, and (3) allow more flexible routes of administration. As the first step toward this goal, we report the development of an automated quantitative high-throughput screening (qHTS) assay platform capable of screening large diverse drug-like chemical libraries to discover novel small molecules that inhibit CD47-SIRPα interaction. Using time-resolved Förster resonance energy transfer (TR-FRET) and bead-based luminescent oxygen channeling assay formats (AlphaScreen), we developed biochemical assays, optimized their performance, and individually tested them in small-molecule library screening. Based on performance and low false positive rate, the LANCE TR-FRET assay was employed in a ~90,000 compound library qHTS, while the AlphaScreen oxygen channeling assay served as a cross-validation orthogonal assay for follow-up characterization. With this multi-assay strategy, we successfully eliminated compounds that interfered with the assays and identified five compounds that inhibit the CD47- SIRPα interaction; these compounds will be further characterized and later disclosed. Importantly, our results validate the large library qHTS for antagonists of CD47-SIRPα interaction and suggest broad applicability of this approach to screen chemical libraries for other protein-protein interaction modulators.

59 BASIC BIOLOGICAL SCIENCES↗

Pooled PPIseq: Screening the SARS-CoV-2 and human interface with a scalable multiplexed protein-protein interaction assay platform

Protein-Protein Interactions (PPIs) are a key interface between virus and host, and these interactions are important to both viral reprogramming of the host and to host restriction of viral infection. In particular, viral-host PPI networks can be used to further our understanding of the molecular mechanisms of tissue specificity, host range, and virulence. At higher scales, viral-host PPI screening could also be used to screen for small-molecule antivirals that interfere with essential viral-host interactions, or to explore how the PPI networks between interacting viral and host genomes co-evolve. Current high-throughput PPI assays have screened entire viral-host PPI networks. However, these studies are time consuming, often require specialized equipment, and are difficult to further scale. Here, we develop methods that make larger-scale viral-host PPI screening more accessible. This approach combines the mDHFR split-tag reporter with the iSeq2 interaction-barcoding system to permit massively-multiplexed PPI quantification by simple pooled engineering of barcoded constructs, integration of these constructs into budding yeast, and fitness measurements by pooled cell competitions and barcode-sequencing. We applied this method to screen for PPIs between SARS-CoV-2 proteins and human proteins, screening in triplicate >180,000 ORF-ORF combinations represented by >1,000,000 barcoded lineages. Our results complement previous screens by identifying 74 putative PPIs, including interactions between ORF7A with the taste receptors TAS2R41 and TAS2R7, and between NSP4 with the transmembrane KDELR2 and KDELR3. We show that this PPI screening method is highly scalable, enabling larger studies aimed at generating a broad understanding of how viral effector proteins converge on cellular targets to effect replication.

60 APPLIED LIFE SCIENCES↗

Bonded Interactions in Silica Polymorphs, Silicates and Siloxane Molecules

Experimental model electron density distributions recorded for the silica polymorphs coesite and stishovite are comparable with electron density distributions calculated for a variety of silicates and siloxane molecules. The Si-O bond lengths and Si-O-Si angles calculated with first principles density functional theory methods as a function of pressure are also comparable with the bond lengths and angles observed for coesite and quartz within the experimental error. The similarity of the topological properties of the Si-O bonded interactions and the experimental and the geometry optimized structures for the silica polymorphs provides a basis for understanding the properties and crystal chemistry in terms of a molecular-based model. The agreement supports the argument that the bulk of the structural, physical and thermodynamic properties of the silica polymorphs are intrinsic properties of the molecular-like coordinated polyhedra such that the silica polymorphs can be pictured as ‘supermolecules’ of silica bound by the virtually same forces that bind the Si and O atoms in simple siloxane molecules. The topology of the electron density distribution is consistent with the assertion that the Si-O bonded interaction arises from the net electrostatic attraction exerted on the nuclei by the electron density accumulated between the Si and O atoms. The correlation between the Si-O bond length and Si-O-Si angle is ascribed to the progressive local concentration of the electron density in the nonbonded region of the O atom as the bond length increases and angle decreases rather then to bonded interactions involving the d-orbitals on Si. On the basis of the proximity of the bond critical point, rc, to the nodal surface of the Laplacian, (nabla) 2 ρ(r c ), and the values of ρ(r c ) and G(r c )/ρ(r c ), the Si-O bond qualifies as an intermediate bonded interaction. For bonded interactions of intermediate character, (nabla) 2 ρ(r c ) increases linearly as ρ(r c ) increases, the greater the shared character, the larger the value of (nabla) 2 ρ(r c ). In addition, a mapping of (nabla) 2 ρ(r) serves to highlight those Lewis base domains that are susceptible to electrophilic attack by H like the O atom in coesite involved in bent Si-O-Si angles, the narrower the angle, the greater the affinity for H . On the basis of the net charges conferred on the Si and O atoms and the bonded radii of the two atoms, the Si-O bond of stishovite with six-coordinated Si and three-coordinated O is indicated to be more ionic in character than that in quartz with four-coordinated Si and two coordinated O. Unlike the conclusion reached for ionic and crystal radii (quantum mechanical unobservables), it is the bonded radius of the O atom that increases with the increasing coordination number of Si, not the radius of the Si atom. The modeling of the electron density distributions for quartz, coesite and beryl as a function of pressure indicates that the shared character of the bonded interactions in these minerals increases slightly with increasing pressure. The insight provided by the calculations and the modeling of the electron density distributions and the structures of the silica polymorphs bodes well for future Earth materials studies that are expected to improve and clarify our understanding of the connection between properties and structure within the framework of quantum mechanical observables, to find new and improved uses and to predict new properties for materials and to enhance our understanding of crystal chemistry and chemical reactions of materials in their natural environment at the atomic level

36 MATERIALS SCIENCE↗

Plasma Wall Interaction with 3-D Plasma Boundaries

The interaction of the edge plasma and the material surfaces is one of the most critical challenges on the path to harness fusion power as new, fundamental energy source. This challenge typically combines the thrust to reach high density, low temperature (detached) plasmas in front of the divertor target plates as well as understanding the plasma material interaction (PMI) in particular in this regime. The combination of both research thrusts represents an extraordinarily challenging subject encompassing spatial scales spanning nanometers to meters in all states of matter and across a broad energy range. Modeling capabilities, which help to interpret data from nowadays experiments and enable extrapolation to future devices are urgently required. This is in particular true for toroidal magnetic confinement devices with three-dimensional (3D) plasma boundaries. Such plasma boundary geometries occur in tokamaks, when small amplitude magnetic perturbations are used to stabilize the unruly edge plasma or in stellarators, that are inherently 3D plasma confinement devices. In this project, the impact of 3D plasma boundaries on the plasma material interaction (PMI) was assessed. This work focused on plasma boundary conditions, in which high-density conditions at the material surfaces yield mitigation of the otherwise immense heat and particle loads that these materials would see. These so-called high recycling and eventually detached plasma regimes are of great interest for future reactor operation. In the project, key features that are unique to 3D boundaries were explored in comparison to canonically assumed axisymmetric plasma edge situations in tokamaks. In particular, the relevance of the 3D boundary situation in the extrapolation to the plasma boundary solution at ITER, the next step fusion energy experiment under construction as a multi-national, world-wide large-science experiment in southern France, has been explored. The EMC3-EIRENE plasma edge fluid and kinetic neutral transport code has been advanced to cope with the challenging and unprecedented conditions in the ITER boundary plasma including 3D fields that are planned to be used to suppress harmful edge instabilities, the so-called edge localized modes. This is a vital integration challenge for ITER and the results from this grant have provide a leading capability for this assessment. It was shown that the detachment process in a 3D edge solution for ITER follows the recycling regimes that are known from axisymmetric solutions, but that multiple plasma exhaust channels connected to the material surfaces are established which feature individual recycling characteristics. Because these channels touch the material surfaces in the divertor in a 3D geometry, the compatibility with the plasma material interaction (PMI), including erosion and impurity generation has been found to be an important part of the integration challenge. To address this, the fully 3D plasma material interaction code ERO2 has been adapted to these ITER specific geometries and a homogeneous mixing model was implemented, that allows to consider the mixing of Be and Was used at ITER in the PMI modeling. This model enhancement has been used to study non-local migration of Be in the JET ITER like wall configuration and it has been shown that with this model such complex migration processes in ITER relevant plasma shapes and with ITER relevant plasma boundary conditions can be addressed. The combined modeling approach using EMC3-EIRENE as a plasma boundary transport code and the ERO2 specialized PMI model will be an asset for the continued preparations of ITER operation as well as for Fusion Pilot Plant efforts that have emerged in the U.S. during the evolution of this grant. The predictive capability of this numerical tool has been validated at the DIII-D US national fusion facility. Here, dedicated plasma edge diagnostics were implemented to measure the impurity household around a 3D edge plasma during ELM suppression by 3D fields. Dedicated experiments with local material probes using these diagnostics and the state-of-the-art suite of boundary measurements at DIII-D have shown that the 3D perturbation of the plasma edge that is excreted by such 3D control fields yield a perturbation of the plasma boundary flux structure and hence also of the resulting PMI. The 3D boundary plasma is composed out of helical magnetic flux channels that intersect the divertor targets at an angle relative to the main guiding field, i.e., the toroidal magnetic field component of the tokamak. A similar effect has been measured as well on limiter surfaces during the startup campaign at the new stellarator experiment Wendelstein 7-X. These experiments ad initial analysis with the ERO plasma material interaction model, suggested that the place of erosion for a given particle from the surface and its re-deposition can be different in such 3D field geometries yielding potentially a significant level of net-erosion. This is not the case for axisymmetric solutions, where it was shown in the past that the eroded particles are effectively re-deposited into gaps produced by erosion at the same position and hence the net-erosion levels are small. For ITER, the quest to suppress the ELMs and at the same time maintain the integrity of the divertor is an issue, which these fundamental findings will help to resolve. The coupling of this work to the extrapolation in the ITER program has been addressed by both the PI and the lead numerical scientist being ITER Science Fellows in the duration of the contract and forward. A second focus in the exploration of 3D boundary effects on tokamaks and stellarators has been set on the measurement of helium exhaust features with such 3D fields. This is important because He represents the ash of the fusion process and needs to be exhausted. It was shown that 3D field application compatible with suppression of ELMs yields an increase of the helium exhaust performance. The ratio of the effective helium confinement time over the energy confinement time was reduced by almost 50% which demonstrated that the impact of helium accumulation in the plasma core with respect to the confinement of energy to sustain the fusion reaction is significantly improved with such 3D control fields. It was shown that this is the case for tokamaks as well as stellarators. At the Large helical Device in Japan, a similar enhancement of the helium exhaust features when small amplitude additional 3D fields were applied was measured. This is an important additional function of 3D field application and its impact on ITER is presently being studied in combination with investigations of helium exhaust in 3D field geometries of stellarator devices.

3D plasma edge transport↗

Applying the Aboveground-Belowground Interaction Concept in Agriculture: Spatio-Temporal Scales Matter

Interactions between aboveground and belowground organisms are important drivers of plant growth and performance in natural ecosystems. Making practical use of such above-belowground biotic interactions offers important opportunities for enhancing the sustainability of agriculture, as it could favor crop growth, nutrient supply, and defense against biotic and abiotic stresses. However, the operation of above- and belowground organisms at different spatial and temporal scales provides important challenges for application in agriculture. Aboveground organisms, such as herbivores and pollinators, operate at spatial scales that exceed individual fields and are highly variable in abundance within growing seasons. In contrast, pathogenic, symbiotic, and decomposer soil biota operate at more localized spatial scales from individual plants to patches of square meters, however, they generate legacy effects on plant performance that may last from single to multiple years. The challenge is to promote pollinators and suppress pests at the landscape and field scale, while creating positive legacy effects of local plant-soil interactions for next generations of plants. Here, we explore the possibilities to improve utilization of above-belowground interactions in agro-ecosystems by considering spatio-temporal scales at which aboveground and belowground organisms operate. We identified that successful integration of above-belowground biotic interactions initially requires developing crop rotations and intercropping systems that create positive local soil legacy effects for neighboring as well subsequent crops. These configurations may then be used as building blocks to design landscapes that accommodate beneficial aboveground communities with respect to their required resources. For successful adoption of above-belowground interactions in agriculture there is a need for context-specific solutions, as well as sound socio-economic embedding.

54 ENVIRONMENTAL SCIENCES↗