Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

A study of the applicability of ZnO thin-films as anti-reflection coating on Cu{sub 2}ZnSnS{sub 4} thin-films solar cell

Transparent ZnO thin-films are prepared using the RF magnetron sputtering and spray pyrolysis techniques on the glass substrates. Reflectance spectra and thin films heights are measured using spectrophotometer and stylus surface profiler, respectively. Measured optical data is used for investigating the effect of the ZnO prepared by above two processes on the performance of Cu{sub 2}ZnSnS{sub 4} (CZTS) thin films solar cell (TFSC). One dimensional simulation approach is considered using the simulation program, SCAPS. External quantum efficiency and J-V characteristics of CZTS TFSC is simulated on the basis of optical reflectance data of ZnO films with and without ZnO thin-films as antireflection coating (ARC). Study shows that ARC coated CZTS TFSC provides a better fill factor (FF) as compared to other ARC material such as MgF{sub 2}. Sprayed ZnO thin-films as ARC show comparable performance with the sputtered samples.

36 MATERIALS SCIENCE↗

Nanomechanical and nanotribological properties of Nb substituted TiN thin films

Nanomechanical and nanotribological properties of Ti{sub 1-x}Nb{sub x}N (0{<=}x{<=}1) thin films were investigated as a function x. The films were deposited onto polycrystalline nuclear grade 316LN stainless steel (SS) substrate by radio frequency magnetron sputtering in 100% N{sub 2} plasma. The hardness and Young's modulus increased while the friction coefficient and wear volume decreased with increasing Nb substitution. The highest hardness achieved was 31GPa for x=0.77. At the same Nb concentration, the friction coefficient was 0.15 and the elastic recovery was 60%.

36 MATERIALS SCIENCE↗

Influence of annealing temperature on electronic and dielectric properties of ZrO{sub 2} thin films on Si

Zirconium oxide (ZrO{sub 2}) films were deposited on (100) silicon substrates by DC reactive magnetron sputtering of zirconium target at an oxygen partial pressure of 6 Multiplication-Sign 10{sup -2} Pa. The as-deposited films were annealed in air for 1 hour at different temperatures in the range 773 - 1173 K. The influence of annealing temperature on the structural properties of ZrO{sub 2} films and the electrical properties like Capacitance-Voltage and Current-Voltage of the capacitors of the type Al/ZrO{sub 2}/p-Si were studied. The capacitance and dielectric constant of the capacitors were found to increase with increase in annealing temperature from 773 to 973 K, however, with further increase in annealing temperature to 1173 K they were found to decrease. In addition, the leakage current density was decreased from 1 Multiplication-Sign 10{sup -6} to 4 Multiplication-Sign 10{sup -7} A/cm{sup 2} at 1V gate bias voltage and the electrical conduction mechanism was dominated by Schottky emission for all the films in lower electric fields.

36 MATERIALS SCIENCE↗

Effect of 79 MeV Br ion irradiation on the surface features of rutile TiO{sub 2} thin film

In this study, rutile titanium dioxide thin films deposited on Si (100) substrates by DC magnetron sputtering are irradiated by 79 MeV Br ions. Though each Br ion is expected to amorphize the medium along its path, the film remains crystalline even at the highest fluence of irradiation. The evolution of surface of the films with Br ion fluence is studied using atomicforce microscopy. The films were found to smoothen under dense electronic excitation of Br ions. The irregular shape grain of the pristine films convert to circular shape at a fluence of 1 Multiplication-Sign 10{sup 13} Br ions cm{sup -2}. Power spectral density (PSD) analysis of the AFM images indicates that irradiation induced smoothing of the surfaces is governed by the surface diffusion process.

36 MATERIALS SCIENCE↗

Irradiation induced modification in transport properties of LaNiO{sub 3} thin films: An x-ray absorption study

Highly c-axis oriented LaNiO{sub 3} thin films are grown on LaAlO{sub 3} (001) single crystal substrates using rf-magnetron sputtering. Swift heavy ion irradiation induced variations in structural and electrical transport properties of deposited films are studied. Pristine film shows unusual insulating character while the irradiated film exhibits metallic behaviour. X-ray diffraction study indicates that irradiation improves the crystalline character of films while retaining the oriented single phase growth. Electronic structure measurements performed using x-ray absorption spectroscopy at O K, La M{sub 5,4}, and Ni L{sub 3,2}-edges reveal that Ni-O hybridization-controlled localization of charge carriers is responsible for the observed transport behaviour.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

d{sup 0} ferromagnetism in undoped n and p-type In{sub 2}O{sub 3} films

Undoped indium oxide films with room temperature d{sup 0} ferromagnetism were prepared by radiofrequency magnetron sputtering with different O{sub 2}/Ar flux ratio. The optical and magnetic properties changed non-monotonously as the oxygen flux increases. A conversion of conductivity from n-type to p-type was observed as the flux ratio reached 15:15. The concordant results in structural, electrical, optical, and magnetic properties suggest that single ionized oxygen and indium vacancies play crucial roles in mediating the ferromagnetism in n and p-type In{sub 2}O{sub 3} films, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric relaxation study of amorphous TiTaO thin films in a large operating temperature range

Two relaxation processes have been identified in amorphous TiTaO thin films deposited by reactive magnetron sputtering. The parallel angle resolved x-ray photoelectron spectroscopy and field emission scanning electron microscopy analyses have shown that this material is composed of an agglomerates mixture of TiO{sub 2}, Ta{sub 2}O{sub 5}, and Ti-Ta bonds. The first relaxation process appears at low temperature with activation energy of about 0.26 eV and is related to the first ionisation of oxygen vacancies and/or the reduction of Ti{sup 4+} to Ti{sup 3+}. The second relaxation process occurs at high temperature with activation energy of 0.95 eV. This last peak is associated to the diffusion of the doubly ionized oxygen vacancies V{sub O}e. The dispersion phenomena observed at high temperature can be attributed to the development of complex defect such as (V{sub O}e - 2Ti{sup 3+}).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of silver incorporation in phase formation and band gap tuning of tungsten oxide thin films

Silver incorporated tungsten oxide thin films are prepared by RF magnetron sputtering technique. The effect of silver incorporation in micro structure evolution, phase enhancement, band gap tuning and other optical properties are investigated using techniques such as x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and UV-Visible spectroscopy. Effect of silver addition in phase formation and band gap tuning of tungsten oxide thin films are investigated. It is found that the texturing and phase formation improves with enhancement in silver content. It is also found that as the silver incorporation enhances the thickness of the films increases at the same time the strain in the film decreases. Even without annealing the desired phase can be achieved by doping with silver. A broad band centered at the wavelength 437 nm is observed in the absorption spectra of tungsten oxide films of higher silver incorporation and this can be attributed to surface plasmon resonance of silver atoms present in the tungsten oxide matrix. The transmittance of the films is decreased with increase in silver content which can be due to increase in film thickness, enhancement of scattering, and absorption of light caused by the increase of grain size, surface roughness and porosity of films and enhanced absorption due to surface plasmon resonance of silver. It is found that silver can act as the seed for the growth of tungsten oxide grains and found that the grain size increases with silver content which in turn decreases the band gap of tungsten oxide from 3.14 eV to 2.70 eV.

36 MATERIALS SCIENCE↗

Electrical properties and thermal stability of Pd-doped copper nitride films

Pd-doped copper nitride films with Pd concentrations up to 5.6 at. % were successfully synthesized by reactive magnetron sputtering of metal targets. Higher concentration of Pd (>5.6 at. %) would deteriorate the quality of the deposits. XPS and XRD data strongly suggest that Pd atoms occupy the centers of the Cu{sub 3}N unit cells rather than simply substituting for the Cu atoms. A reduction in the electrical resistivity by three orders of magnitude was observed when the Pd concentration increases from zero to 5.6 at. %. All the deposits with the Pd concentration up to 5.6 at. % exhibit n-typed conductivity behavior. The corresponding carrier concentrations increase by four orders of magnitude from 10{sup 17} to 10{sup 21} cm{sup -3}. Compared with the undoped copper nitride films, a weakly Pd-doped Cu{sub 3}N films possess fine thermal stability in vacuum. And the decomposition product after annealing at 450 Degree-Sign C exhibits a good metallic behavior, indicating that it qualifies the fabrication of conduct wires or metallic structures for the promising applications.

36 MATERIALS SCIENCE↗

The change of electrical transport characterizations in Ga doped ZnO films with various thicknesses

GZO films with different thicknesses were prepared at room temperature by magnetron sputtering and the structure is characterized using two-dimensional X-ray diffraction along with transmission electron microscope and X-ray photoelectron spectroscopy. The films show a textured orientation along the c-axis and an average transmittance of over 90%. The films of 100 and 200 nm are characterized by a semiconductor behavior in the temperature range of 80-320 K, while the conduction behavior turns into a metallic transport at 160 K as the film thickness increases to 400 nm. Temperature dependence of the conductivity manifests a weak localization effect dominated in the semiconductor behavior. The transition between semiconductor and metallic behavior with increasing the thickness is shown to be associated to crystallinity of the films which is improved with decreasing defects and lattice distortion. It is suggested that the improvement of crystallinity should be favored by reduction of the weak localization effect and in turn enhance the semiconductor-to-metal transition.

36 MATERIALS SCIENCE↗

Role of indium in highly crystalline ZnO thin films

Zinc oxide and indium doped zinc oxide (ZnO:In) transparent conducting thin films were deposited on glass substrates by pulsed DC magnetron sputtering using separate Zn and In targets. The independent control of the In content in ZnO has helped us to explore the role of indium in influencing the oriented (002) growth, crystallinity, conductivity and mobility of the doped films. The lowest resistivity of ZnO:In thin film is 2.73 Multiplication-Sign 10{sup -3} ohm-cm. At the optimal condition of high (002) orientation, ZnO:In films with electrical resistivity of 7.63 Multiplication-Sign 10{sup -3} ohm.cm and mobility of 126.4 cm{sup 2}/V.s are achieved.

36 MATERIALS SCIENCE↗

The transition from amorphous to crystalline in Al/Zr multilayers

The amorphous-to-crystalline transition in Al(1.0%wtSi)/Zr and Al(Pure)/Zr multilayers grown by direct-current magnetron sputtering system has been characterized over a range of Al layer thicknesses (1.0-5.0 nm) by using a series of complementary measurements including grazing incidence X-ray reflectometry, atomic force microscopy, X-ray diffraction, and high-resolution transmission electron microscopy. The Al layer thickness transition exhibits the Si doped in Al could not only disfavor the crystallization of Al but also influence the changing trends of surface roughness and diffraction peak position of phase Al<111>. An interesting feature of the presence of Si in Al layer is that Si could influence the transition process in Al(1%wtSi) layer, in which the critical thickness (1.6 nm) of Al(Pure) layer in Al(Pure)/Zr shifts to 1.8 nm of Al(1.0%wtSi) layer in Al(1.0%wtSi)/Zr multilayer. We also found that the Zr-on-Al interlayer is wider than the Al-on-Zr interlayer in both systems, and the Al layers do not have specific crystal orientation in the directions vertical to the layer from selected area electron diffraction patterns below the thickness (3.0 nm) of Al layers. Above the thickness (3.0 nm) of Al layers, the Al layers are highly oriented in Al<111>, so that the transformation from asymmetrical to symmetrical interlayers can be observed. Based on the analysis of all measurements, we build up a model with four steps, which could explain the Al layer thickness transition process in terms of a critical thickness for the nucleation of Al(Pure) and Al(1%wtSi) crystallites.

36 MATERIALS SCIENCE↗

The local structure, magnetic, and transport properties of Cr-doped In{sub 2}O{sub 3} films

Cr-doped In{sub 2}O{sub 3} films were deposited on Si (100) substrates by RF-magnetron sputtering technique. The local structure, magnetic, and transport properties of films are investigated by X-ray diffraction, X-ray photoelectron spectroscopy, X-ray absorption fine structure, Hall effect, R-T, and magnetic measurements. Structural analysis clearly indicates that Cr ions substitute for In{sup 3+} sites of the In{sub 2}O{sub 3} lattice in the valence of +2 states and Cr-related secondary phases or clusters as the source of ferromagnetism is safely ruled out. The films with low Cr concentration show a crossover from semiconducting to metallic transport behavior, whereas only semiconducting behavior is observed in high Cr concentration films. The transport property of all films is governed by Mott variable range hopping behavior, suggesting that the carriers are strongly localized. Magnetic characterizations show that the saturated magnetization of films increases first, and then decreases with Cr doping, while carrier concentration n{sub c} decreases monotonically, implying that the ferromagnetism is not directly induced by the mediated carriers. It can be concluded the ferromagnetism of films is intrinsic and originates from electrons bound in defect states associated with oxygen vacancies.

36 MATERIALS SCIENCE↗

Two-phase nc-TiN/a-(C,CN{sub x}) nanocomposite films: A HRTEM and MC simulation study

The grain growth in two-phase nanocomposite Ti-C{sub x}-N{sub y} thin films grown by reactive close-field unbalanced magnetron sputtering in an Ar-N{sub 2} gas mixture with microstructures comprising of nanocrystalline (nc-) Ti(N,C) phase surrounded by amorphous (a-) (C,CN{sub x}) phase was investigated by a combination of high-resolution transmission electron microscopy (HRTEM) and Monte Carlo (MC) simulations. The HRTEM results revealed that amorphous-free solid solution Ti(C,N) thin films exhibited polycrystallites with different sizes, orientations and irregular shapes. The grain size varied in the range between several nanometers and several decade nanometers. Further increase of C content (up to {approx}19 at.% C) made the amorphous phase wet nanocrystallites, which strongly hindered the growth of nanocrystallites. As a result, more regular Ti(C,N) nanocrystallites with an average size of {approx}5 nm were found to be separated by {approx}0.5-nm amorphous phases. When C content was further increased (up to {approx}48 at.% in this study), thicker amorphous matrices were produced and followed by the formation of smaller sized grains with lognormal distribution. Our MC analysis indicated that with increasing amorphous volume fraction (i.e. increasing C content), the transformation from nc/nc grain boundary (GB)-curvature-driven growth to a/nc GB-curvature-driven growth is directly responsible for the observed grain growth from great inhomogeneity to homogeneity process.

36 MATERIALS SCIENCE↗

Morphology, electrical, and optical properties of heavily doped ZnTe:Cu thin films

We report on a study of the physical properties of ZnTe:Cu films with Cu content up to ∼12 at. % prepared using rf magnetron sputtering. The composition and lateral homogeneities are studied using X-ray photoelectron spectroscopy (XPS). Atomic force microscopy measurements on films deposited at different substrate temperatures (up to 325 °C) yielded activation energy of 12 kJ/mole for the grains growth. The results of XPS and electrical and optical measurements provide evidence for the formation of the ternary zinc copper telluride alloy in films containing Cu concentration above ∼4 at. %. The XPS results suggest that copper is incorporated in the alloy with oxidation state Cu{sup 1+} so that the alloy formula can be written Zn{sub 1−y}Cu{sub y} Te with y = 2−x, where x is a parameter measuring the stoichiometry in the Cu site. The formation of this alloy causes appreciable shift in the binding energies of the XPS peaks besides an IR shift in the energy band gap. Detailed analysis of the optical absorption data revealed the presence of two additional transitions, besides the band gap one, originating from the Γ{sub 8} and Γ{sub 7} (spin-orbit) valence bands to a donor level at ∼0.34 eV below the Γ{sub 6} conduction band. This interpretation yields a value for the valence band splitting energy Δ≅ 0.87 eV independent of copper concentration. On the other hand, the mechanism of formation of the alloy is tentatively explained in terms of a point defect reaction in which substitutional Cu defect Cu{sub Zn} is also created. Assuming that substitutional Cu is the dominant acceptor in the Zn rich alloy as in ZnTe, its formation energy was determined to be 1.7 eV close to the theoretical value (1.41 eV) in ZnTe.

36 MATERIALS SCIENCE↗

Evidence of impurity assisted tunneling in SiGe/Si heterostructures

The investigation of vertical transport in delta-doped SiGe/Si heterostructures has been presented. The asymmetrical triple barrier structure was grown by MBE technique. The delta layer of boron impurity was placed into the center of narrower quantum well. The growth procedure was followed by conventional processing including photolithography and plasma etching and magnetron sputtering. SIMS and X-rays diagnostics have been used to control the desired structure. The conductance of the structure has been measured at liquid helium temperature and analyzed. All pronounced resonances have been identified. The resonant feature near 60 mV has to be attributed to impurity-assisted tunneling that is supported by calculation of binding energy of the acceptor in the narrower quantum well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of epitaxial Heusler alloy Fe{sub 2}Cr{sub 0.5}Co{sub 0.5}Si

This paper reports the study of structural and magnetic properties of Heusler alloy Fe{sub 2}Cr{sub 0.5}Co{sub 0.5}Si (FCCS) thin film and its tunnel magnetoresistance (TMR) effect. The smooth quaternary Heusler alloy FCCS film with surface roughness of rms value of 0.25 nm measured by atomic force microscopy and partial L2{sub 1} phase was obtained by magnetron sputtering at room temperature followed by in-situ annealing at 400 °C. The saturation magnetization and coercivity of FCCS are 410 emu/cm{sup 3} and 20 Oe, respectively. The magnetic tunnel junctions (MTJs) using FCCS as free layer were studied in detail as a function of post-annealing temperature. A TMR ratio of 15.6% has been achieved with 300 °C post-annealing. This is about twice the highest TMR ratio obtained in MTJs using Fe{sub 2}CrSi. The enhancement of TMR ratio can be attributed to the successful tuning of the Fermi level of Fe{sub 2}CrSi close to the center of the minority band gap by Co-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermochromic undoped and Mg-doped VO{sub 2} thin films and nanoparticles: Optical properties and performance limits for energy efficient windows

Undoped and Mg-doped thermochromic VO{sub 2} films with atom ratios z ≡ Mg/(Mg + V) of 0 ≤ z < 0.21 were deposited by reactive DC magnetron sputtering onto heated glass and carbon substrates. Elemental compositions were found by Rutherford backscattering spectrometry. Optical constants were determined from transmittance and reflectance measurements and were used for modeling the optical properties of thin films and dilute nanoparticle composite layers below and above the critical temperature for thermochromic switching between a low-temperature infrared transparent state and a high-temperature infrared reflecting or absorbing state. Mg-doped films showed superior luminous transmittance T{sub lum} and solar transmittance modulation ΔT{sub sol} compared to undoped VO{sub 2} films, and both of these parameters could be further enhanced by anti-reflection. VO{sub 2}-containing nanocomposites had much larger values of T{sub lum} and ΔT{sub sol} than VO{sub 2}-based films. Mg-doping was found to erode the properties of the nanocomposites. Approximate performance limits are given on T{sub lum} and ΔT{sub sol} for thermochromic VO{sub 2} films, with and without Mg doping and antireflection coating, and also for VO{sub 2}-containing dilute nanocomposites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗