Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Energy and mobility impacts of connected autonomous vehicles with co-optimization of speed and powertrain on mixed vehicle platoons

Intersections are known to be traffic bottlenecks where a significant amount of energy consumption could be caused due to deceleration/acceleration in the presence of red signals. With an increased level of connectivity and automation of intelligent transportation systems, connected autonomous vehicles (CAVs) are expected to be able to proactively adjust their driving strategies subject to constraints imposed by the predicted future traffic. As a result, many potential benefits can be achieved, such as improved energy efficiency, enhanced traffic safety, among many others. Notably, the way CAVs are controlled affects the following legacy vehicles (LVs) due to complex traffic dynamics. Here, we are particularly interested in studying the energy and mobility impact of CAVs with an improved traffic prediction method on mixed vehicle platoons at various market penetration rates. Leveraging traffic prediction, CAVs are controlled with co-optimization of their speed and gear position. Specifically, a traffic prediction framework in a rolling horizon fashion is employed based upon a modified Payne–Whitham (PW) model capable of handling mixed traffic consisting of CAVs and LVs. The prediction error of the modified PW model is reduced by 53.62% compared to that of the standard PW model under test scenarios. According to the predicted traffic conditions, speed and gear position of CAVs are co-optimized with the primary goal of minimizing energy consumption when driving on a signalized arterial. The energy benefits achieved by CAVs and the impact of CAVs on LVs behind are studied comprehensively for mixed vehicle platoons. The lead LV follows a real-world speed profile collected on TH-55 in Minnesota. Numerical results show that energy benefits achieved by the vehicle platoon range from 2% to 16%, and a 1% to 5% reduction in travel time for LVs behind CAVs is also observed, at different penetration rates of CAVs in various traffic scenarios. Furthermore, it is observed that CAVs using the proposed eco-driving approach appear to have a positive impact on the LVs behind in terms of energy consumption, regardless of the driving styles of the LVs ahead.

33 ADVANCED PROPULSION SYSTEMS↗

DETECTION OF SIGNALS FROM COSMIC REIONIZATION USING RADIO INTERFEROMETRIC SIGNAL PROCESSING

Observations of the H I 21 cm transition line promises to be an important probe into the cosmic dark ages and epoch of reionization. One of the challenges for the detection of this signal is the accuracy of the foreground source removal. This paper investigates the extragalactic point source contamination and how accurately the bright sources (approx>1 Jy) should be removed in order to reach the desired rms noise and be able to detect the 21 cm transition line. Here, we consider position and flux errors in the global sky model for these bright sources as well as the frequency independent residual calibration errors. The synthesized beam is the only frequency dependent term included here. This work determines the level of accuracy for the calibration and source removal schemes and puts forward constraints for the design of the cosmic reionization data reduction scheme for the upcoming low frequency arrays such as, Murchison Widefield Array, Precision Array to Probe Epoch of Reionization, etc. We show that in order to detect the reionization signal the bright sources need to be removed from the data sets with a positional accuracy of approx0.1 arcsec. Our results also demonstrate that the efficient foreground source removal strategies can only tolerate a frequency independent antenna based mean residual calibration error of approx<0.2% in amplitude or approx<0.{sup 0}2 in phase, if they are constant over each days of observations (6 hr). In future papers, we will extend this analysis to the power-spectral domain and also include the frequency-dependent calibration errors and direction-dependent errors (ionosphere, primary beam, etc.).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kalman filter data assimilation: Targeting observations and parameter estimation

This paper studies the effect of targeted observations on state and parameter estimates determined with Kalman filter data assimilation (DA) techniques. We first provide an analytical result demonstrating that targeting observations within the Kalman filter for a linear model can significantly reduce state estimation error as opposed to fixed or randomly located observations. We next conduct observing system simulation experiments for a chaotic model of meteorological interest, where we demonstrate that the local ensemble transform Kalman filter (LETKF) with targeted observations based on largest ensemble variance is skillful in providing more accurate state estimates than the LETKF with randomly located observations. Additionally, we find that a hybrid ensemble Kalman filter parameter estimation method accurately updates model parameters within the targeted observation context to further improve state estimation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radar range measurements in the atmosphere

The earth's atmosphere affects the velocity of propagation of microwave signals. This imparts a range error to radar range measurements that assume the typical simplistic model for propagation velocity. This range error is a function of atmospheric constituents, such as water vapor, as well as the geometry of the radar data collection, notably altitude and range. Models are presented for calculating atmospheric effects on radar range measurements, and compared against more elaborate atmospheric models.

Doerry, Armin Walter↗

Scripted Building Energy Modeling and Analysis (Presentation)

Building energy analysis is often time-intensive, error-prone, and non-reproducible. Entire energy analyses can be scripted end-to-end using the OpenStudio Ruby API. Common tasks within an analysis can be automated using OpenStudio Measures. Graphical user interfaces (GUI's) and component libraries reduce time, decrease errors, and improve repeatability in energy modeling.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A density functional theory based approach for predicting melting points of ionic liquids

Accurate prediction of melting points of ILs is important both from the fundamental point of view and from the practical perspective for screening ILs with low melting points and broadening their utilization in a wider temperature range. In this work, we present an ab initio approach to calculating melting points of ILs with known crystal structures and illustrate its application for a series of 11 ILs containing imidazolium/pyrrolidinium cations and halide/polyatomic fluoro-containing anions. The melting point is determined as a temperature at which the Gibbs free energy of fusion is zero. The Gibbs free energy of fusion can be expressed through the use of the Born-Fajans-Haber cycle via the lattice free energy of forming a solid IL from gaseous phase ions and the sum of the solvation free energies of ions comprising IL. Dispersion-corrected density functional theory (DFT) involving (semi)local (PBE-D3) and hybrid exchange-correlation (HSE06-D3) functionals is applied to estimate the lattice enthalpy, entropy, and free energy. The ions solvation free energies are calculated with the SMD-generic-IL solvation model at the M06-2X/6-31+G(d) level of theory under standard conditions. The melting points of ILs computed with the HSE06-D3 functional are in good agreement with the experimental data, with a mean absolute error of 30.5 K and a mean relative error of 8.5%. The model is capable of accurately reproducing the trends in melting points upon variation of alkyl substituents in organic cations and replacement one anion by another. The results verify that the lattice energies of ILs containing polyatomic fluoro-containing anions can be approximated reasonably well using the volume-based thermodynamic approach. However, there is no correlation of the computed lattice energies with molecular volume for ILs containing halide anions. Moreover, entropies of solid ILs follow two different linear relationships with molecular volume for halides and polyatomic fluoro-containing anions. As a result, continuous progress in predicting crystal structures of organic salts with halide anions will be a key factor for successful prediction of melting points with no prior knowledge of the crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BEAM-FORMING ERRORS IN MURCHISON WIDEFIELD ARRAY PHASED ARRAY ANTENNAS AND THEIR EFFECTS ON EPOCH OF REIONIZATION SCIENCE

Accurate antenna beam models are critical for radio observations aiming to isolate the redshifted 21 cm spectral line emission from the Dark Ages and the Epoch of Reionization (EOR) and unlock the scientific potential of 21 cm cosmology. Past work has focused on characterizing mean antenna beam models using either satellite signals or astronomical sources as calibrators, but antenna-to-antenna variation due to imperfect instrumentation has remained unexplored. We characterize this variation for the Murchison Widefield Array (MWA) through laboratory measurements and simulations, finding typical deviations of the order of ±10%–20% near the edges of the main lobe and in the sidelobes. We consider the ramifications of these results for image- and power spectrum-based science. In particular, we simulate visibilities measured by a 100 m baseline and find that using an otherwise perfect foreground model, unmodeled beam-forming errors severely limit foreground subtraction accuracy within the region of Fourier space contaminated by foreground emission (the “wedge”). This region likely contains much of the cosmological signal, and accessing it will require measurement of per-antenna beam patterns. However, unmodeled beam-forming errors do not contaminate the Fourier space region expected to be free of foreground contamination (the “EOR window”), showing that foreground avoidance remains a viable strategy.

79 ASTRONOMY AND ASTROPHYSICS↗

Clouds at Barbados are representative of clouds across the trade wind regions in observations and climate models

Significance This paper shows that clouds near Barbados exhibit similar properties to those over much of the tropical oceans. This finding allows observations taken at Barbados to be generalized to the broader tropics. The same approach is applied to climate models to show that errors in simulated clouds near Barbados are similar to errors across the tropical oceans. The errors are related to the representation of the vertical structure of clouds and the boundary layer and the underlying turbulent and convective mixing that create the clouds. Because trade wind clouds are a key contribution to the spread in climate model estimates of climate sensitivity, improvements in these clouds could reduce uncertainty in climate projections.

Medeiros, Brian↗

Automated Symbolic Upscaling: 2. Model Generation for Extended Applicability Regimes

Abstract In this second part of the two paper series, we detail an algorithmic procedure for systematically implementing the generalized closure form strategy presented in Part 1. This strategy extends the applicability of homogenized models with respect to classical homogenization theory, as demonstrated in Part 1 where upscaled models are rigorously derived in moderately reactive physical regimes. After encoding the algorithm into Symbolica, an automated upscaling framework, we upscale two reactive mass transport problems and numerically validate the resulting nonlinear homogenized models by showing the absolute error estimates predicted by homogenization theory are satisfied. In both problems, nontrivial closure forms and closure problems are automatically formulated using the encoded strategy with no human interaction, nor prior knowledge regarding the closure required for the systems. We hope these demonstrations spark further interest in automated analytical frameworks for multiscale modeling, as such capabilities are invaluable for generating rigorous multiscale models of complex phenomena in porous media.

Pietrzyk, Kyle↗

Predicting critical heat flux with uncertainty quantification and domain generalization using conditional variational autoencoders and deep neural networks

Deep generative models (DGMs) can generate synthetic data samples that closely resemble the original dataset, addressing data scarcity. In this work, we developed a conditional variational autoencoder (CVAE) to augment critical heat flux (CHF) data used for the 2006 Groeneveld lookup table. To compare with traditional methods, a fine-tuned deep neural network (DNN) regression model was evaluated on the same dataset. Both models achieved small mean absolute relative errors, with the CVAE showing more favorable results. Uncertainty quantification (UQ) was performed using repeated CVAE sampling and DNN ensembling. The DNN ensemble improved performance over the baseline, while the CVAE maintained consistent results with less variability and higher confidence. Both models achieved small errors inside and outside the training domain, with slightly larger errors outside. Altogether, the CVAE performed better than the DNN in predicting CHF and exhibited better uncertainty behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Diagnosing nuclear power plant pipe wall thinning due to flow accelerated corrosion using a passive, thermal non-destructive evaluation method: Feasibility assessment via numerical experiments

Flow accelerated corrosion (FAC) in nuclear power plant pipes is one of the leading causes of accidents, fatalities, damage and outages. Current FAC identification methods employ expensive sensing technology and are “active” methods, where the response of the piping system to an externally-generated thermal, mechanical or optical excitation must be measured. As a result, these techniques require a disruptive and time-consuming setup. Here we propose a method that utilizes pipe surface temperature measurements to passively monitor for FAC-induced pipe wall thinning without the need for expensive equipment or post-installation setup time. This diagnostic method utilizes a simulation data-driven diagnostic model to estimate the amount of thickness reduction in a pipe based on changes in measured steady-state pipe temperatures. In order to reduce the computational burden of generating large, simulation-based datasets, the behavior of the insulation of the pipe was modeled using a suitably calibrated heat transfer boundary parameter. Additionally, global sensitivity analysis was performed to determine system parameter(s), such as the temperature of water flowing inside the pipe, which significantly affect the steady state pipe wall temperature and could cause errors in diagnosis. Two diagnostic models, one using only the change in steady-state temperature as an indicator for FAC-induced pipe wall thinning and the other using water temperature as an additional diagnostic model input were evaluated for their ability to estimate thickness reductions in a pipe using simulated pipe wall temperature data. For the numerical experiments conducted in this work, both models estimated wall thickness with errors within 0.5 mm, indicating that the proposed technique can potentially be used as a low-cost, first-pass method for FAC monitoring.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modeling Electron Injection at Semiconductor–Molecule Interfaces using First-Principles Dynamics Simulation: Effects of Nonadiabatic Coupling, Self-energy, and Surface Models

Excited electron transfer across semiconductor–molecule heterogeneous interfaces is central to various future electronic and optoelectronic devices. At the same time, first-principles modeling of such dynamical processes remains as a great challenge in theoretical chemistry and condensed matter physics for developing better understanding at the molecular scale. Excited electron transfer from a molecule to semiconductor surface is a particularly difficult case to model accurately, because the initial state of such an electron injection process often lies deep within the dense manifold of the conduction band states in the semiconductor. Nonadiabatic couplings and energy level alignments at such interfaces as well as the finite size error of the surface model all play important roles in numerical modeling of electron injection via first-principles theory. Here, using representative interfaces between a well-defined hydrogen-terminated Si(111) surface and series of covalently adsorbed conjugated molecules, we investigate the extent to which these theoretical and numerical considerations influence the description of electron injection at the semiconductor–molecule interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The National Climate Data Base (NCDB): A Bias-Corrected High-Resolution Climate Dataset

Assessing renewable energy resources under future climate scenarios has been highlighted in recent years to analyze and understand potential impacts of future change in renewable generation on the power sector. Solar energy is well-known as the most plentiful among various renewable resources and usually converted to electricity using photovoltaics (PV) technologies, and the global deployment of PV technology has increased rapidly in recent decades. In this study, we develop a statistical technique to downscale the future projection of solar irradiance for PV energy-related applications. A set of Regional Climate Model (RCM)-based projections obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) are used as inputs to statistical methods to generate high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). The main steps of the statistical downscaling method include (1) regridding RCM output (0.22 degree and daily resolutions) to handle the modeled-observed data sets on a common grid, (2) correcting bias of RCM GHI using satellite-derived observation, and (3) implementing temporal and spatial downscaling to generate GHI at 8-km and hourly resolution. Basically, complex physical processes and interactions between solar radiation and various atmospheric constituents lead solar irradiance to be highly variable and uncertain. Underrepresentation of clouds from the RCM parameterizations is the main source of error and uncertainty in modeling solar irradiance. Thus, we adapt and use the high-quality satellite-derived data from the National Solar Radiation Database (NSRDB) to analyze the bias and error of RCM GHI as well as estimate the statistical parameters for spatial and temporal downscaling. This presentation will summarize the comprehensive analysis conducted to produce and assess the results under two climate scenarios (RCP4.5 and RCP8.5). We will also present a detailed validation demonstrating the strengths of the proposed downscaling method and future extension of this research.

climate data↗

The National Climate Database (NCDB): An Unbiased 100-Year Dataset for PV Modeling

In this study, we develop a statistical technique to downscale the future projection of solar irradiance for photovoltaics (PV) energy-related applications. A set of Regional Climate Model (RCM)-based projections obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) are used as inputs to statistical methods to generate high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). The main steps of the statistical downscaling method include (1) regridding RCM output (0.22 degree and daily resolutions) to handle the modeled-observed data sets on a common grid, (2) correcting bias of RCM GHI using satellite-derived observation, and (3) implementing temporal and spatial downscaling to generate GHI at 8-km and hourly resolution. Basically, complex physical processes and interactions between solar radiation and various atmospheric constituents lead solar irradiance to be highly variable and uncertain. Underrepresentation of clouds from the RCM parameterizations is the main source of error and uncertainty in modeling solar irradiance. Thus, we adapt and use the high-quality satellite-derived data from the National Solar Radiation Database (NSRDB) to analyze the bias and error of RCM GHI as well as estimate the statistical parameters for spatial and temporal downscaling. This presentation will summarize the comprehensive analysis conducted to produce and assess the results under two climate scenarios (RCP4.5 and RCP8.5). We will also present a detailed validation demonstrating the strengths of the downscaling method, a summary of the 100-year dataset from 2001-2100, and future extension of this research.

bias correction↗

FORWARD MODELING CAVITY DENSITY: A MULTI-INSTRUMENT DIAGNOSTIC

The thermodynamic properties of coronal prominence cavities present a unique probe into the energy and mass budget of prominences. Using a three-dimensional morphological model, we forward model the polarization brightness and extreme-ultraviolet (EUV) emission of a cavity and its surrounding streamer. Using a genetic algorithm, we find the best-fit density model by comparing the models to Mauna Loa Solar Observatory MK4 and Hinode EUV Imaging Spectrometer data. The effect of temperature variations on the derived density is also measured. We have measured the density inside a cavity down to 1.05 R{sub sun} with height-dependent error bars. Our forward modeling technique compensates for optically thin projection effects. This method provides a complementary technique to traditional line ratio diagnostics that is useful for diffuse off-limb coronal structures.

79 ASTRONOMY AND ASTROPHYSICS↗

A comparison of effective field theory models of redshift space galaxy power spectra for DESI 2024 and future surveys

In preparation for the next generation of galaxy redshift surveys, and in particular the year-one data release from the Dark Energy Spectroscopic Instrument (DESI), we investigate the consistency of a variety of effective field theory models that describe the galaxy-galaxy power spectra in redshift space into the quasi-linear regime using 1-loop perturbation theory. These models are employed in the pipelines velocileptors, PyBird, and Folpsν. While these models have been validated independently, a detailed comparison with consistent choices has not been attempted. After briefly discussing the theoretical differences between the models we describe how to provide a more apples-to-apples comparison between them. We present the results of fitting mock spectra from the AbacusSummit suite of N-body simulations provided in three redshift bins to mimic the types of dark time tracers targeted by the DESI survey. We show that the theories behave similarly and give consistent constraints in both the forward-modeling and ShapeFit compressed fitting approaches. We additionally generate (noiseless) synthetic data from each pipeline to be fit by the others, varying the scale cuts in order to show that the models agree within the range of scales for which we expect 1-loop perturbation theory to be applicable. Finally, this work lays the foundation of Full-Shape analysis with DESI Y1 galaxy samples where in the tests we performed, we found no systematic error associated with the modeling of the galaxy redshift space power spectrum for this volume.

79 ASTRONOMY AND ASTROPHYSICS↗

WE-B-304-01: Treatment Planning Evaluation and Optimization Should Be Dose/volume and Not Biologically Based

The ultimate goal of radiotherapy treatment planning is to find a treatment that will yield a high tumor control probability (TCP) with an acceptable normal tissue complication probability (NTCP). Yet most treatment planning today is not based upon optimization of TCPs and NTCPs, but rather upon meeting physical dose and volume constraints defined by the planner. It has been suggested that treatment planning evaluation and optimization would be more effective if they were biologically and not dose/volume based, and this is the claim debated in this month’s Point/Counterpoint. After a brief overview of biologically and DVH based treatment planning by the Moderator Colin Orton, Joseph Deasy (for biological planning) and Charles Mayo (against biological planning) will begin the debate. Some of the arguments in support of biological planning include: this will result in more effective dose distributions for many patients DVH-based measures of plan quality are known to have little predictive value there is little evidence that either D95 or D98 of the PTV is a good predictor of tumor control sufficient validated outcome prediction models are now becoming available and should be used to drive planning and optimization Some of the arguments against biological planning include: several decades of experience with DVH-based planning should not be discarded we do not know enough about the reliability and errors associated with biological models the radiotherapy community in general has little direct experience with side by side comparisons of DVH vs biological metrics and outcomes it is unlikely that a clinician would accept extremely cold regions in a CTV or hot regions in a PTV, despite having acceptable TCP values Learning Objectives: To understand dose/volume based treatment planning and its potential limitations To understand biological metrics such as EUD, TCP, and NTCP To understand biologically based treatment planning and its potential limitations.

60 APPLIED LIFE SCIENCES↗

Storm Surge Modeling in Puget Sound

In this study, a storm surge model of the Salish Sea was developed to simulate storm surge in Puget Sound using the unstructured-grid, finite-volume community ocean model (FVCOM). The model was based on Pacific Northwest National Laboratory’s existing Puget Sound hydrodynamic model that has been validated extensively in previous studies. To identify representative historical storm events, a systematic approach was developed based on the non-tidal residual (NTR) method. A total of 34 storm surge events between 1980 and 2016 were identified and simulated. To accurately simulate storm surge inside Puget Sound, the model was driven by reanalyzed Climate Forecast System Reanalysis meteorological forcing and observed water levels at the entrance of Strait of Juan de Fuca and southern entrance of Johnstone Strait. Model results for total water level, storm surge, and currents were compared with field measurements. A series of error statistics parameters were also calculated to quantify the model’s skills in simulating storm surge in the Salish Sea. Error statistics of model performance metrics demonstrated that the Salish Sea storm surge model was able to simulate storm surge inside Puget Sound with high accuracy. Storm surge propagation into Puget Sound is a nonlinear process that cannot be simply determined by a static approach for the entire domain. The maximum NTR distribution inside Puget Sound suggests that storm surge tends to be amplified in several sub-basins and inlets of the Puget Sound, such as Bellingham Bay, Hood Canal, south Puget Sound, and the multi-inlet basin behind Agate and Rich Passages. Therefore, future study is necessary to further quantify the storm surge level in these high-risk areas through field measurements and refined model simulations.

16 TIDAL AND WAVE POWER↗