SEARCH · Search NASA

Results for “Multidimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Upwind scheme for solving the Euler equations on unstructured tetrahedral meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a multidimensional linear reconstruction process. The solution gradients required for the higher-order differenes are computed by a novel approach that yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicitly applying a limiter. Solutions are advanced in time by a three-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Transonic solutions are presented for two meshes around the ONERA M6 wing and demonstrate substantial accuracy and insensitivity to mesh size.

Frink, Neal T.↗

NASA NTRS1992

Conical detonation waves - A comparison of theoretical and numerical results

A predictive capability for conical oblique detonation waves (ODWs) is discussed with particular attention given to the special case of an axisymmetric conical projectile, which yields necessary conditions for attached waves. A multidimensional numerical model was used to study the influence of a finite Damkoehler number (Da) and viscosity on the formation of a conical ODW. The ODW is predicted for Da on the order of 10, and is found to be important in the ODW formation. For a Da of 1, shock induced combustion is predicted. Simulations of the experimental geometry showed general agreement with experimental flow features, but underpredicted the shock angle. It is suggested that this difference may be caused by inadequate boundary layer resolution, lack of grid orthogonality at the cone surface, and an inappropriate chemical mechanism.

Fort, James A.↗

NASA NTRS1992

Lean flammability limit of downward propagating hydrogen-air flames

Detailed multidimensional numerical simulations that include the effects of wall heat losses have been performed to study the dynamics of downward flame propagation and extinguishment in lean hydrogen-air mixtures. The computational results show that a downward propagating flame in an isothermal channel has a flammability limit of around 9.75 percent. This is in excellent agreement with experimental results. Also in excellent agreement are the detailed observations of the flame behavior at the point of extinguishment. The primary conclusion of this work is that detailed numerical simulations that include wall heat losses and the effect of gravity can adequately simulate the dynamics of the extinguishment process in downward-propagating hydrogen-air flames. These simulations can be examined in detail to gain understanding of the actual extinction process.

Patnaik, G.↗

NASA NTRS1991

Unsupervised segmentation of polarimetric SAR data using the covariance matrix

An unsupervised selection of polarimetric features useful for the segmentation and analysis of polarimetric synthetic aperture radar (SAR) data is presented. The technique is based on multidimensional clustering of the parameters composing the polarimetric covariance matrix of the data. Clustering is performed on the logarithm of these quantities. Once the polarimetric cluster centers have been determined, segmentation of the polarimetric data into regions is performed using a maximum likelihood polarimetric classifier. Segmentation maps are further improved using a Markov random field to describe the statistics of the regions and computing the maximum of the product of the local conditional densities. Examples with real polarimetric SAR imagery are given to illustrate the potential of this method.

Rignot, Eric↗

NASA NTRS1992

Hydrodynamic instabilities in supernova remnants - Self-similar driven waves

An initial study aimed at elucidating the multidimensional aspects of the hydrodynamic instabilities in supernova remnants is presented. Self-similar solutions are found to exist for the interaction of a steep power-law density profile expanding into a relatively flat stationary power-law density profile. Consideration of the pressure and entropy profiles in the shocked 1D flows shows that the flows are subject to convective instability, by a local criterion. The growth rate for the instability becomes very large near the contact discontinuity between the two shocked regions. A linear analysis of the complete self-similar solutions shows that the solutions are unstable above a critical wavenumber and that the growth rate is greatest at the position of the contact discontinuity. The X-ray image of the remnant of SN 1572 (Tycho) shows emission from clumps of supernova ejecta, which is good evidence for instabilities in this remnant.

Chevalier, Roger A.↗

NASA NTRS1992

Analysis of ignition and flame spreading in the Space Shuttle head-end star grain

A model to analyze the unsteady, multidimensional, turbulent flow in the head-end, star slot section of a solid rocket motor (SRM) during ignition transients is presented. This paper examines the complex interactions between the expanding igniter plume, the flow field within the star slot, the heat transfer to the solid propellant, ignition of the propellant, and subsequent flame spreading across the surface of the grain in the slot. The analysis provides a description of the ignition transient sequence from the onset of igniter flow to complete ignition of the head-end star slot region of the SRM.

Ciucci, A.↗

NASA NTRS1991

Instantaneous heat transfer coefficient based upon two-dimensional analyses of Stirling space engine components

Twelve different cases of multidimensional models of Stirling engine components for space applications have been numerically investigated for oscillating, incompressible laminar flow with heat transfer. The cases studied covered wide ranges of Valensi number (from 44 to 700), Re(max) number (from 8250 to 60,000), and relative amplitude of fluid motion of 0.686 and 1.32. The Nusselt numbers obtained from the present study indicate a very complex shape with respect to time and axial location in the channel. The results indicate that three parameters can be used to define the local Nusselt number variation, namely: time average, amplitude, and phase angle. These parameters could be correlated respectively using: Re(max), Va and Re(max), and the relative amplitude of fluid motion.

Ibrahim, Mounir↗

NASA NTRS1992

Enhancing control of grid distribution in algebraic grid generation

Three techniques are presented to enhance the control of grid-point distribution for a class of algebraic grid generation methods known as the two-, four- and six-boundary methods. First, multidimensional stretching functions are presented, and a technique is devised to construct them based on the desired distribution of grid points along certain boundaries. Second, a normalization procedure is proposed which allows more effective control over orthogonality of grid lines at boundaries and curvature of grid lines near boundaries. And third, interpolating functions based on tension splines are introduced to control curvature of grid lines in the interior of the spatial domain. In addition to these three techniques, consistency conditions are derived which must be satisfied by all user-specified data employed in the grid generation process to control grid-point distribution. The usefulness of the techniques developed in this study was demonstrated by using them in conjunction with the two- and four-boundary methods to generate several grid systems, including a three-dimensional grid system in the coolant passage of a radial turbine blade with serpentine channels and pin fins.

Steinthorsson, E.↗

NASA NTRS1992

Pressurization of cryogens - A review of current technology and its applicability to low-gravity conditions

A review of technology, history, and current status for pressurized expulsion of cryogenic tankage is presented. Use of tank pressurization to expel cryogenic fluid will continue to be studied for future spacecraft applications over a range of operating conditions in the low-gravity environment. The review examines experimental test results and analytical model development for quiescent and agitated conditions in normal-gravity followed by a discussion of pressurization and expulsion in low-gravity. Validated, 1-D, finite difference codes exist for the prediction of pressurant mass requirements within the range of quiescent normal-gravity test data. To date, the effects of liquid sloshing have been characterized by tests in normal-gravity, but analytical models capable of predicting pressurant gas requirements remain unavailable. Efforts to develop multidimensional modeling capabilities in both normal and low-gravity have recently occurred. Low-gravity cryogenic fluid transfer experiments are needed to obtain low-gravity pressurized expulsion data. This data is required to guide analytical model development and to verify code performance.

Van Dresar, N. T.↗

NASA NTRS1992

Numerical simulation of unsteady flow in a hypersonic shock tunnel facility

This paper describes the computational work performed on the simulation of a 16-in shock-tunnel facility. The numerical problems encountered during the computation of these flows are discussed along with the validity of some approximations used, notably concerning the reduction of the problem into problems of smaller dimensionality. Quasi-1D simulations can be used to help design experiments, or to better understanding the characteristics of the facility. An application to the design of a nonintrusive diagnostic is shown. The multidimensional flow transients computed include the shock reflection at the end of the driven tube, the shock propagation down the nozzle, and the breaking of the main diaphragm.

Cambier, Jean-Luc↗

NASA NTRS1993

Planning Robot-Control Parameters With Qualitative Reasoning

Qualitative-reasoning planning algorithm helps to determine quantitative parameters controlling motion of robot. Algorithm regarded as performing search in multidimensional space of control parameters from starting point to goal region in which desired result of robotic manipulation achieved. Makes use of directed graph representing qualitative physical equations describing task, and interacts, at each sampling period, with history of quantitative control parameters and sensory data, to narrow search for reliable values of quantitative control parameters.

Peters, Stephen F.↗

NASA NTRS1991

Predicted aircraft effects on stratospheric ozone

The possibility that the current fleet of subsonic aircraft may already have caused detectable changes in both the troposphere and stratosphere has raised concerns about the impact of such operations on stratospheric ozone and climate. Recent interest in the operation of supersonic aircraft in the lower stratosphere has heightened such concerns. Previous assessments of impacts from proposed supersonic aircraft were based mostly on one-dimensional model results although a limited number of multidimensional models were used. In the past 15 years, our understanding of the processes that control the atmospheric concentrations of trace gases has changed dramatically. This better understanding was achieved through accumulation of kinetic data and field observations as well as development of new models. It would be beneficial to start examining the impact of subsonic aircraft to identify opportunities to study and validate the mechanisms that were proposed to explain the ozone responses. The two major concerns are the potential for a decrease in the column abundance of ozone leading to an increase in ultraviolet radiation at the ground, and redistribution of ozone in the lower stratosphere and upper troposphere leading to changes in the Earth's climate. Two-dimensional models were used extensively for ozone assessment studies, with a focus on responses to chlorine perturbations. There are problems specific to the aircraft issues that are not adequately addressed by the current models. This chapter reviews the current status of the research on aircraft impact on ozone with emphasis on immediate model improvements necessary for extending our understanding. The discussion will be limited to current and projected commercial aircraft that are equipped with air-breathing engines using conventional jet fuel. The impacts are discussed in terms of the anticipated fuel use at cruise altitude.

Ko, Malcolm K. W.↗

NASA NTRS1992

Visualization techniques to aid in the analysis of multi-spectral astrophysical data sets

This report describes our project activities for the period Sep. 1991 - Oct. 1992. Our activities included stabilizing the software system STAR, porting STAR to IDL/widgets (improved user interface), targeting new visualization techniques for multi-dimensional data visualization (emphasizing 3D visualization), and exploring leading-edge 3D interface devices. During the past project year we emphasized high-end visualization techniques, by exploring new tools offered by state-of-the-art visualization software (such as AVS3 and IDL4/widgets), by experimenting with tools still under research at the Department of Computer Science (e.g., use of glyphs for multidimensional data visualization), and by researching current 3D input/output devices as they could be used to explore 3D astrophysical data. As always, any project activity is driven by the need to interpret astrophysical data more effectively.

Domik, Gitta↗

NASA NTRS1992

Model based estimation of image depth and displacement

Passive depth and displacement map determinations have become an important part of computer vision processing. Applications that make use of this type of information include autonomous navigation, robotic assembly, image sequence compression, structure identification, and 3-D motion estimation. With the reliance of such systems on visual image characteristics, a need to overcome image degradations, such as random image-capture noise, motion, and quantization effects, is clearly necessary. Many depth and displacement estimation algorithms also introduce additional distortions due to the gradient operations performed on the noisy intensity images. These degradations can limit the accuracy and reliability of the displacement or depth information extracted from such sequences. Recognizing the previously stated conditions, a new method to model and estimate a restored depth or displacement field is presented. Once a model has been established, the field can be filtered using currently established multidimensional algorithms. In particular, the reduced order model Kalman filter (ROMKF), which has been shown to be an effective tool in the reduction of image intensity distortions, was applied to the computed displacement fields. Results of the application of this model show significant improvements on the restored field. Previous attempts at restoring the depth or displacement fields assumed homogeneous characteristics which resulted in the smoothing of discontinuities. In these situations, edges were lost. An adaptive model parameter selection method is provided that maintains sharp edge boundaries in the restored field. This has been successfully applied to images representative of robotic scenarios. In order to accommodate image sequences, the standard 2-D ROMKF model is extended into 3-D by the incorporation of a deterministic component based on previously restored fields. The inclusion of past depth and displacement fields allows a means of incorporating the temporal information into the restoration process. A summary on the conditions that indicate which type of filtering should be applied to a field is provided.

Damour, Kevin T.↗

NASA NTRS1992

Cognitive and affective components of mental workload: Understanding the effects of each on human decision making behavior

Human factors and ergonomics researchers have recognized for some time the increasing importance of understanding the role of the construct of mental workload in flight research. Current models of mental workload suggest that it is a multidimensional and complex construct, but one that has proved difficult to measure. Because of this difficulty, emphasis has usually been placed on using direct reports through subjective measures such as rating scales to assess levels of mental workload. The NASA Task Load Index (NASA/TLX, Hart and Staveland) has been shown to be a highly reliable and sensitive measure of perceived mental workload. But a problem with measures like TLX is that there is still considerable disagreement as to what it is about mental workload that these subjective measures are actually measuring. The empirical use of subjective workload measures has largely been to provide estimates of the cognitive components of the actual mental workload required for a task. However, my research suggests that these measures may, in fact have greater potential in accurately assessing the affective components of workload. That is, for example, TLX may be more likely to assess the positive and negative feelings associated with varying workload levels, which in turn may potentially influence the decision making behavior that directly bears on performance and safety issues. Pilots, for example, are often called upon to complete many complex tasks that are high in mental workload, stress, and frustration, and that have significant dynamic decision making components -- often ones that involve risk as well.

Nygren, Thomas E.↗

NASA NTRS1993

Structure and dynamics of premixed flames in microgravity

In this report we describe the research performed at the Naval Research Laboratory in support of the NASA Microgravity Science and Applications Program over the past three years with emphasis on the work performed since February 1992, the beginning of the current project. The focus of our research has been on investigating fundamental combustion questions concerning the propagation and extinction of gas-phase flames in microgravity and earth-gravity environments. Our approach to resolving these fundamental questions has been to use detailed time-dependent, multidimensional numerical models to perform carefully designed computational experiments. The basic questions we have addressed, a general description of the numerical approach, and a summary of the results are described in this report. More detailed discussions are available in the papers published which are referenced herein.

Kailasanath, K.↗

NASA NTRS1993

Design of fuzzy system by NNs and realization of adaptability

The issue of designing and tuning fuzzy membership functions by neural networks (NN's) was started by NN-driven Fuzzy Reasoning in 1988. NN-driven fuzzy reasoning involves a NN embedded in the fuzzy system which generates membership values. In conventional fuzzy system design, the membership functions are hand-crafted by trial and error for each input variable. In contrast, NN-driven fuzzy reasoning considers several variables simultaneously and can design a multidimensional, nonlinear membership function for the entire subspace.

Takagi, Hideyuki↗

NASA NTRS1992

On essentially non-oscillatory schemes on unstructured meshes: Analysis and implementation

A few years ago, the class of Essentially Non-Oscillatory Schemes for the numerical simulation of hyperbolic equations and systems was constructed. Since then, some extensions have been made to multidimensional simulations of compressible flows, mainly in the context of very regular structured meshes. In this paper, we first recall and improve the results of an earlier paper about non-oscillatory reconstruction on unstructured meshes, emphasizing the effective calculation of the reconstruction. Then we describe a class of numerical schemes on unstructured meshes and give some applications for its third order version. This demonstrates that a higher order of accuracy is indeed obtained, even on very irregular meshes.

Abgrall, R.↗