Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear Operating Experience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Moving Beyond NDE to Proactive Management of Materials Degradation

There is growing interest in life extensions to enable longer term operation (LTO) for both existing nuclear power plants (NPPs) and proposed new NPPs. In order to justify an initial license extension for the 40-60 year period, new non-destructive examination (NDE) approaches have been developed and deployed by NPP operators in their Aging Management Programs (AMPs). However, to achieve the goals of even longer term operation, and specifically for the USA in looking at methodologies to support subsequent license renewal periods (i.e., 60-80 years, and beyond), it is necessary to understand the capabilities of current NDE methods to detect, monitor and trend degradation and hence enable timely implementation of appropriate corrective actions. This paper discusses insights from past experience, the state-of-the-art, and current activities in the move towards providing a capacity for proactive management of materials degradation (PMMD) to support NPP LTO.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of water-moderated heterogeneous cores in new STACY facility through JAEA/IRSN collaboration - 14363

In the post-Fukushima prospect, Japan Atomic Energy Agency, JAEA, intends to re-open its Static Experiment Critical Facility STACY, in order to contribute to the validation of fuel debris calculations in conditions close to those affected by the Fukushima Daiichi Nuclear Power Station accident. The reactor core of STACY is being modified by JAEA from homogeneous solution fuel core to heterogeneous pin- type fuel core. The first step of critical experiments is to establish reference experiments involving lattices of UO{sub 2} rods without fuel debris. A design of such experiments is in progress for the widest range of moderation ratios in the frame of JAEA/IRSN collaboration. To anticipate the specification values of materials to be manufactured (grids, rods), an evaluation of uncertainties pertaining to the different parameters driving k{sub eff} is paramount. The following uncertainties of experimental cores are evaluated to estimate the reactivity effect of engineering tolerance/or measurements of the modified STACY: (1) Density of fuel pellets, (2) Enrichment of uranium, (3) Diameter of fuel pellets, (4) Thickness of fuel claddings, (5) Impurities of fuel pellets, (6) Impurities of fuel claddings and (7) Positioning of fuel rods in the lattice. For these calculations, three types of moderation conditions were considered within the experimental parameters of STACY: the lowest moderation (lattice pitch = 1.15 cm; V{sub m}/V{sub f}=1.2), optimum moderation (lattice pitch = 1.5 cm, V{sub m}/V{sub f} = 2.9) and an over moderated case (lattice pitch = 2.55 cm; V{sub m}/V{sub f} = 11). The calculations to derive the overall uncertainty of modified STACY were performed propagating the 1σ uncertainties of parameters of existing STACY in terms of k{sub eff}. For that purpose, a perturbation calculation (differential operator) technique and a stochastic geometry modeling technique were used with the MCNP5 continuous energy Monte Carlo code and a point-wise cross section library based on the JENDL-4.0 evaluated nuclear data library. Moreover, the results of calculations were compared with those calculated by two continuous energy Monte Carlo codes using the correlated sampling technique: - An experimental version of the Japanese MVP2 code combined to the JENDL-4.0 nuclear data library, - The MORET 5 code, developed by IRSN, combined to the JEFF-3.1 nuclear data library. The proposed paper discusses all the aforementioned issues, and confirms that the uncertainty pertaining to the critical experiments of the STACY is sufficiently small. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High-Definition Optical Velocimetry: A New Diagnostic Paradigm for Nuclear Security

This slide-show describes work done to address the challenge of high-definition optical velocimetry with hundred(s) of high-fidelity velocity vs. time measurements. After a review of the historical context and a general technical description of how optical velocimetry, particularly photonic Doppler velocimetry, works, the innovation of multiplexed photonic Doppler velocimetry (MPDV) is described as implemented with commercially available telecom products and dense wavelength division multiplexing (DWDM). High amplification of small signals allows for laser-safe operations. The authors have evaluated and leveraged telecom components– optical amplifiers, wavelength multiplexers, and seed lasers–to provide an economical, compact and rugged approach to system architecture. Fourier transform data analysis is seen to be robust and capable of discriminating simultaneous data traces recorded onto a single digitizer channel. The authors successfully fielded demonstration MPDV system on shock driven experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of confocal laser microscopy for monitoring mesh implants in herniology

The state of the surface of mesh implants and their encapsulation region in herniology is investigated by laser confocal microscopy. A correlation between the probability of developing relapses and the size and density of implant microdefects is experimentally shown. The applicability limits of differential reverse scattering for monitoring the post-operation state of implant and adjacent tissues are established based on model numerical experiments. (optical technologies in biophysics and medicine)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Overview of ATLAS PanDA Workload Management

The Production and Distributed Analysis System (PanDA) plays a key role in the ATLAS distributed computing infrastructure. All ATLAS Monte-Carlo simulation and data reprocessing jobs pass through the PanDA system. We will describe how PanDA manages job execution on the grid using dynamic resource estimation and data replication together with intelligent brokerage in order to meet the scaling and automation requirements of ATLAS distributed computing. PanDA is also the primary ATLAS system for processing user and group analysis jobs, bringing further requirements for quick, flexible adaptation to the rapidly evolving analysis use cases of the early datataking phase, in addition to the high reliability, robustness and usability needed to provide efficient and transparent utilization of the grid for analysis users. We will describe how PanDA meets ATLAS requirements, the evolution of the system in light of operational experience, how the system has performed during the first LHC data-taking phase and plans for the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CMS centres worldwide: A new collaborative infrastructure

The CMS Experiment at the LHC has established a network of more than fifty inter-connected 'CMS Centres' at CERN and in institutes in the Americas, Asia, Australasia, and Europe. These facilities are used by people doing CMS detector and computing grid operations, remote shifts, data quality monitoring and analysis, as well as education and outreach. We present the computing, software, and collaborative tools and videoconferencing systems. These include permanently running 'telepresence' video links (hardware-based H.323, EVO and Vidyo), Webcasts, and generic Web tools such as CMS-TV for broadcasting live monitoring and outreach information. Being Web-based and experiment-independent, these systems could easily be extended to other organizations. We describe the experiences of using CMS Centres Worldwide in the CMS data-taking operations as well as for major media events with several hundred TV channels, radio stations, and many more press journalists simultaneously around the world.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Lessons Learned in International Safeguards - Implementation of Safeguards at the Rokkasho Reprocessing Plant

The focus of this report is lessons learned at the Rokkasho Reprocessing Plant (RRP). However, the subject of lessons learned for application of international safeguards at reprocessing plants includes a cumulative history of inspections starting at the West Valley (New York, U.S.A.) reprocessing plant in 1969 and proceeding through all of the efforts over the years. The RRP is the latest and most challenging application the International Atomic Energy Agency has faced. In many ways the challenges have remained the same, timely inspection and evaluation with limited inspector resources, with the continuing realization that planning and preparations can never start early enough in the life cycle of a facility. Lessons learned over the years have involved the challenges of using ongoing advances in technology and dealing with facilities with increased throughput and continuous operation. This report will begin with a review of historical developments and lessons learned. This will provide a basis for a discussion of the experiences and lessons learned from the implementation of international safeguards at RRP.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Small Unmanned Aerial Systems (sUAS) on the NNSS White Paper

The Nevada National Security Site (NNSS) prides itself on being the premier outdoor, indoor, and underground national laboratory. It is the preferred location for experiments supporting the National Nuclear Security Administration’s nuclear weapons Stockpile Stewardship Programs, national defense programs, and national security research, development, and training programs, as well as vital programs of other federal agencies. Work at the NNSS supports the Stockpile Stewardship Program, Global and Homeland Security programs, and Environmental Management. The NNSS looks to incorporate safer work practices and continuous improvements. Unmanned Aerial Surveys (UAS) have already been implemented in areas off the NNSS for multiple uses. Using these best practices with systems catered to the NNSS would allow integration of new technology and would allow work at the NNSS to maintain the high level of quality already exhibited. The Management and Operating Contractor (M&O) has shown experience in multiple UAS platforms. Through the coordination and experience developed through these projects, the M&O can further improve the quality and cost effectiveness of services currently rendered and offer new services not currently available today. Several NNSS departments that could implement UAS technology are Emergency Response, Facility Management, Environmental Management, and Training. These departments would be able to improve their capabilities and expand personnel effectiveness with the inclusion of UASs and the information they provide.

61 RADIATION PROTECTION AND DOSIMETRY↗

WTEC monograph on instrumentation, control and safety systems of Canadian nuclear facilities

This report updates a 1989-90 survey of advanced instrumentation and controls (I&C) technologies and associated human factors issues in the U.S. and Canadian nuclear industries carried out by a team from Oak Ridge National Laboratory (Carter and Uhrig 1990). The authors found that the most advanced I&C systems are in the Canadian CANDU plants, where the newest plant (Darlington) has digital systems in almost 100 percent of its control systems and in over 70 percent of its plant protection system. Increased emphasis on human factors and cognitive science in modern control rooms has resulted in a reduced workload for the operators and the elimination of many human errors. Automation implemented through digital instrumentation and control is effectively changing the role of the operator to that of a systems manager. The hypothesis that properly introducing digital systems increases safety is supported by the Canadian experience. The performance of these digital systems has been achieved using appropriate quality assurance programs for both hardware and software development. Recent regulatory authority review of the development of safety-critical software has resulted in the creation of isolated software modules with well defined interfaces and more formal structure in the software generation. The ability of digital systems to detect impending failures and initiate a fail-safe action is a significant safety issue that should be of special interest to nuclear utilities and regulatory authorities around the world.

Uhrig, Robert E.↗

Integrated Circuit Design for Radiation-Hardened Charge-Sensitive Amplifier Survived up to 2 Mrad

According to the continuous development of metal-oxide semiconductor (MOS) fabrication technology, transistors have naturally become more radiation-tolerant through steadily decreasing gate-oxide thickness, increasing the tunneling probability between gate-oxide and channel. Unfortunately, despite this radiation-hardened property of developed transistors, the field of nuclear power plants (NPPs) requires even higher radiation hardness levels. Particularly, total ionizing dose (TID) of approximately 1 Mrad could be required for readout circuitry under severe accident conditions with 100 Mrad around a reactor in-core required. In harsh radiating environments such as NPPs, sensors such as micro-pocket-fission detectors (MPFD) would be a promising technology to be operated for detecting neutrons in reactor cores. For those sensors, readout circuits should be fundamentally placed close to sensing devices for minimizing signal interferences and white noise. Therefore, radiation hardening ability is necessary for the circuits under high radiation environments. This paper presents various integrated circuit designs for a radiation hardened charge-sensitive amplifier (CSA) by using SiGe 130 nm and Si 180 nm fabrication processes with different channel widths and transistor types of complementary metal-oxide-semiconductor (CMOS) and bipolar CMOS (BiCMOS). These circuits were tested under γ–ray environment with Cobalt-60 of high level activity: 490 kCi. The experiment results indicate amplitude degradation of 2.85%–34.3%, fall time increase of 201–1730 ns, as well as a signal-to-noise ratio (SNR) of 0.07–11.6 dB decrease with irradiation dose increase. These results can provide design guidelines for radiation hardening operational amplifiers in terms of transistor sizes and structures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Computational Modeling, Simulation and Analysis of the RPI Walthousen Reactor Critical Facility (RCF)

The Walthousen Reactor Critical Facility (RCF), located in Schenectady, New York, is currently owned and operated by Rensselaer Polytechnic Institute (RPI). The facility was originally constructed by the American Locomotive Company (ALCO) for the research and development of small, portable reactors. Originally designed for highly-enriched uranium fuel, the prototype reactor first came online in August 26, 1956, and was transferred to RPI ownership in 1963. Several changes to the reactor's design and operation have been made, the most notable of which was the conversion from high-enriched uranium to low-enriched uranium fuel. The RCF is an open-pool critical assembly that operates at a low power with a license limit of less than 100 watts. This low operating power permits a much greater flexibility in configuration and operation as compared to other research reactors. Because of this, experiments may be designed that would be unfeasible for research reactors that operate at much higher powers. The RCF's functional capabilities provide opportunities to perform several reactor experiments and measurements, such as: core criticality experiments, differential and integral rod worth measurements, moderator temperature coefficient of reactivity calculations, critical rod height and critical water height measurements, etc.. These experiments are regularly performed in conjunction with RPI course-work education and Senior Reactor Operator (SRO) training. The unique capabilities and experiments that may be performed in the RCF are particularly useful for validating certain aspects of computational analysis codes. A computational model of the RCF reactor has been previously generated and validated using the Monte Carlo N-Particle (MCNP) code. For the purpose of future experiments, this model is also being adapted for use with the SHARP Toolset, which includes the PROTEUS neutronics code, the Nek5000 fluid dynamics code, and the Diablo structural mechanics code. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Model Study and Site Experience of Radiation Physics Analysis for Research Reactor Decommissioning - 18586

The University of Alberta Safe Low Power Kritical Experiment (SLOWPOKE II) nuclear reactor facility (UASF) was commissioned on April 22, 1977. It was designed, built and installed by Atomic Energy of Canada Limited (AECL) and was the fourth SLOWPOKE II research reactor installed at a Canadian university at that time. The reactor was used as a source of neutrons for radionuclide production and elemental analysis via neutron activation analysis, to provide a service to industry, government and to support research and teaching at the University of Alberta. It was licensed to operate at 20 kW, less than the heat produced by a small residential furnace, and work with the reactor was typically performed at one-tenth full power. After nearly four decades of service, the reactor reached the end of its useful life in August 2017 when defueling and the project to decommission the reactor began. Decommissioning of the UASF is a process to dismantle the facility by progressively removing the reactor core and other radioactive components as well as managing the balance of contaminated materials around the reactor in a safe manner. The objective of the project is to release the site from the Canadian Nuclear Safety Commission's (CNSC) regulatory control and return the site to a 'greenfield' status. This paper will discuss the radiation physics analysis that was undertaken to support the decommissioning of the University of Alberta SLOWPOKE II Facility Reactor which took place from July - October 2017. It will address the radiation physics model study, development of the radiation protection (RP) plan, site experience and how the lessons learned from this project can be utilized for best practice on other similar projects. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advancing nuclear forensics competencies at the National Nuclear Center of the Republic of Kazakhstan and conceptual development of a National Nuclear Forensics Library

Since 2021, the National Nuclear Center (NNC) of the Republic of Kazakhstan has been successfully developing a project dedicated to nuclear forensics. The relevance of this project is underscored by Kazakhstan’s leading position in the global uranium mining and export market. The country operates research reactors and is involved in the production of experimental nuclear fuel. The nuclear forensics project is being implemented in several key areas: the project will develop competencies in laboratory research of samples, interpretation of results, and develop a prototype concept for the National Nuclear Forensics Library. In implementing these challenges, the NNC experts draw on the experience of colleagues from world-leading scientific and research centers. Designing a prototype National Nuclear Forensics Library (NNFL) is a challenging project. In conclusion, the solution to this task is based on the IAEA’s approaches, recommendations, and the experience gained from the construction of similar systems in other countries.

and nuclear chemistry↗

System thermal-hydraulic modelling of the phénix dissymmetric test benchmark

Phénix is a French pool-type sodium-cooled prototype reactor; before the definitive shutdown, occurred in 2009, a final set of experimental tests are carried out in order to increase the knowledge on the operation and the safety aspect of the pool-type liquid metal-cooled reactors. One of the experiments was the Dissymmetric End-of-Life Test which was selected for the validation benchmark activity in the frame of SESAME project. The computer code validation plays a key role in the safety assessment of the innovative nuclear reactors and the Phénix dissymmetric test provides useful experimental data to verify the computer codes capability in the asymmetric thermal-hydraulic behaviour into a pool-type liquid metal-cooled reactor. This paper shows the comparison of the outcomes obtained with six different System Thermal-Hydraulic (STH) codes: RELAP5-3D©, SPECTRA, ATHLET, SAS4A/SASSYS-1, ASTEC-Na and CATHARE. The nodalization scheme of the reactor was individually achieved by the participants; during the development of the thermal-hydraulic model, the pool nodalization methodology had a special attention in order to investigate the capability of the STH codes to reproduce the dissymmetric effects which occur in each loop and into pools, caused by the azimuthal asymmetry of the boundary conditions. The modelling methodology of the participants is discussed and the main results are compared in this paper to obtain useful guide lines for the future modelling of innovative liquid metal pool-type reactors.

42 ENGINEERING↗

The Sanford Underground Research Facility at Homestake (SURF)

The former Homestake gold mine in Lead, South Dakota is being transformed into a dedicated laboratory to pursue underground research in rare-process physics, as well as offering research opportunities in other disciplines. A key component of the Sanford Underground Research Facility (SURF) is the Davis Campus, which is in operation at the 4850-foot level (4300 m.w.e) and currently hosts three projects: the LUX dark matter experiment, the Majorana Demonstrator neutrinoless double-beta decay experiment and the Berkeley and CUBED low-background counters. Plans for possible future experiments at SURF are well underway and include long baseline neutrino oscillation experiments, future dark matter experiments as well as nuclear astrophysics accelerators. Facility upgrades to accommodate some of these future projects have already started. SURF is a dedicated facility with significant expansion capability. These plans include a Generation-2 Dark Matter experiment and the US flagship neutrino experiment, LBNE.

79 ASTRONOMY AND ASTROPHYSICS↗

Progress Toward Simulating Departure from Nucleate Boiling at High-Pressure Applications with Selected Wall Boiling Closures

Recently, a Eulerian-based two-fluid computational fluid dynamics (CFD) framework with a wall heat flux partitioning approach has been intensively investigated for departure from nucleate boiling (DNB) simulation under the U.S. Department of Energy–funded Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Understanding of the DNB characteristics over a range of pressurized water reactor–like operating conditions and accurate prediction of boiling crisis in the nuclear power system have been grand challenges because of the large impact of DNB on reactor safety and operational economics. The ultimate goal of this task in the CASL program is to introduce a robust multiphase CFD–based DNB modeling framework that is capable of characterizing an entire boiling history in which the wall boiling mode experiences the following through multiple stages of heat transfer mode: (1) single-phase convective heat transfer, (2) nucleate boiling heat transfer, and (3) identification of the departure of nucleate boiling. To validate the CASL boiling model, we have benchmarked simulated DNB over three different flow channel configurations (pipe flow, 5 × 5 fuel bundle with mixing vane tests, and 5 × 5 fuel bundle without mixing vane tests) against experimental measurements, and the validation result with open literature is reported. The DNB detection criteria in the simulation are checked by monitoring the peak wall temperature, wall dryout factor, and net energy balance. In addition to the DNB performance test, some preliminary sensitivity results on closure model selection are reported to address the prediction capability of local void profile against measurements. The boiling simulation tested in this study exhibits a maximum deviation of 24% from the measured DNB value in a high-pressure (i.e., 138 bars) subcooled pipe flow test. The ranges of operating conditions are as follows: 1650 to 2650 kg/m 2 ·s for mass flux and 8.5 to 96 K for subcooled inlet temperature. The deviation is even reduced to 7% when the subcooled temperature is less than 40 K. Besides accuracy, base practice guidelines for DNB detection criteria are tested by monitoring three simulation variables: (1) maximum wall temperature, (2) wall dryout factor (i.e., K-value), and (3) energy balance. Numerical robustness of DNB simulation is largely achieved in most of the validation test except for a few high subcooled test cases.

42 ENGINEERING↗

Evaluation of Flowing Salt Irradiation Facilities with High Neutron Flux

There is significant current interest in the commercial power industry in developing nuclear reactor concepts using molten salt as a coolant or as a fuel-bearing medium and coolant. The Molten Salt Reactor Experiment (MSRE), which was performed at Oak Ridge National Laboratory from 1964-1969, established the feasibility of this reactor design and performed some of the early work in qualifying appropriate structural materials and coolant salts. However, modern versions of this design often incorporate aspects that are beyond the design basis of the MSRE. For example, some designs intend to operate at a higher temperature, use a different structural material, or a different salt altogether. These new designs will eventually require irradiation testing in a variety of reactors and conditions. This document specifically evaluates the possibilities and requirements associated with the most difficult of these conditions: a flowing salt irradiation under high neutron flux.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Fuel Cycle Cost Basis Report: Supporting Document 5 Considerations on Learning

Learning refers here to the increased experience associated to each new build of a given type of fuel cycle facility, which results generally in design improvements, increased construction and operational efficiencies and reduced mistakes, and therefore in reduced costs. These are important considerations, for example, when modeling transitions from first-of-a-kind (FOAK) to nth-of-a-kind (NOAK) nuclear facilities and deciding the magnitude of the cost reduction (if any) to be applied to each successive build. Different assumptions on learning can significantly affect the results of the economic analyses during transitions. Other competing electricity-generation technologies, such as wind and solar power for example, have demonstrated substantial cost reductions through learning during the last few decades.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗