Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precursor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Quantifying precursors to void nucleation and coalescence in aluminum

Ductile rupture is a common failure mode for engineering alloys. It is generally comprised of three mechanisms: void nucleation at secondary particles, void growth, and coalescence of voids. Conventional models for ductile rupture have limited precision for predicting macroscopic failure. This is partially because they have been corroborated using ex-situ observations of these three mechanisms and calibrated by macroscopic strain or stress metrics. In this study, in-situ high-energy X-ray characterization was conducted to correlate sites of void nucleation via particle cracking and sites of void growth with grain-scale metrics. Here it is shown that particle cracking is not predicated by elevated stress metrics, which disagrees with classical models. Instead, particle cracking tended to occur for the largest, least spherical particles. This trend persisted on the aggregate-scale and within individual neighborhoods around particles. Furthermore, an Eshelby analysis illuminated a statistically significant increase in maximum principal stress within a cracked particle, compared to an uncracked particle. In-situ observations also revealed two separate examples of intragranular void growth comprised of flat, crack-like features that grew showing alignment with slip systems of the highest resolved shear stress. Post-mortem fractography revealed a secondary population of dimples on these crack-like features, implying that void sheeting may be occurring during this crack-like void growth. Furthermore, these in-situ observations imply that classical models for void growth, that assume a homogenous medium, should be extended to account for the anisotropic grain-level behavior to correctly capture distinct features of void nucleation and growth.

Al-2219↗

Bottom-Up Two-Dimensional Electron-Capture Dissociation Mass Spectrometry of Calmodulin

Two-dimensional mass spectrometry (2D MS) is a tandem mass spectrometry technique that allows data-independent fragmentation of all precursors in a mixture without previous isolation, through modulation of the ion cyclotron frequency in the ICR-cell prior to fragmentation. Its power as an analytical technique has been proven particularly for proteomics. Recently, a comparison study between 1D and 2D MS has been performed using infrared multiphoton dissociation (IRMPD) on calmodulin (CaM), highlighting the capabilities of the technique in both top-down (TDP) and bottom-up proteomics (BUP). The goal of this work is to expand this study on CaM using electron-capture dissociation (ECD) 2D MS as a single complementary BUP experiment in order to enhance the cleavage coverage of the protein under analysis. By adding the results of the BUP 2D ECD MS to the 2D IRMPD MS analysis of CaM, the total cleavage coverage increased from ~40% to ~68%. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tigutcystatin, a cysteine protease inhibitor from Triatoma infestans midgut expressed in response to Trypanosoma cruzi

Highlights: {yields} Tigutcystatin inhibits Trypanosoma cruzi cysteine proteases with high specificity. {yields} Tigutcystatin expression is up-regulated in response to T. cruzi infection. {yields} It is the first cysteine proteases inhibitor characterized from a triatomine insect. -- Abstract: The insect Triatoma infestans is a vector of Trypanosoma cruzi, the etiological agent of Chagas disease. A cDNA library was constructed from T. infestans anterior midgut, and 244 clones were sequenced. Among the EST sequences, an open reading frame (ORF) with homology to a cystatin type 2 precursor was identified. Then, a 288-bp cDNA fragment encoding mature cystatin (lacking signal peptide) named Tigutcystatin was cloned fused to a N-terminal His tag in pET-14b vector, and the protein expressed in Escherichia coli strain Rosetta gami. Tigutcystatin purified and cleaved by thrombin to remove His tag presented molecular mass of 11 kDa and 10,137 Da by SDS-PAGE and MALDI-TOF mass spectrometry, respectively. Purified Tigutcystatin was shown to be a tight inhibitor towards cruzain, a T. cruzi cathepsin L-like enzyme (K{sub i} = 3.29 nM) and human cathepsin L (K{sub i} = 3.78 nM). Tissue specific expression analysis showed that Tigutcystatin was mostly expressed in anterior midgut, although amplification in small intestine was also detected by semi quantitative RT-PCR. qReal time PCR confirmed that Tigutcystatin mRNA is significantly up-regulated in anterior midgut when T. infestans is infected with T. cruzi. Together, these results indicate that Tigutcystatin may be involved in modulation of T. cruzi in intestinal tract by inhibiting parasite cysteine proteases, which represent the virulence factors of this protozoan.

60 APPLIED LIFE SCIENCES↗

Designing Multiscale Porous Metal by Simple Dealloying with 3D Morphological Evolution Mechanism Revealed via X-ray Nano-tomography

Designing materials with multiscale, hierarchical structure is critical to drive the advancement of new technology. Specifically, porous metals with multiscale porosity from nanometer to micrometer sizes would lead to enhanced physical and chemical properties—the micron-sized pores can increase the effective diffusivity of ion transport within the porous media, and the nano-sized pores provide high specific surface area, enabling functionalities that are unique to nanoporous metals. A new ternary precursor alloy selection concept utilizing the different mixing enthalpies is demonstrated in this work for the design of multiscale, bimodal porous copper from a simple, one-step dealloying of Cu–Fe–Al ternary alloy. The nanoporosity in the bimodal porous structure is formed from dealloying of the Cu-rich phase, whereas the microporosity is controlled by dissolving the Fe-rich phase, determined by both the initial Fe particle size and sintering profile. In addition to advancing the materials design method, the multiscale pore formation during dealloying was directly visualized and quantified via an interrupted in situ synchrotron X-ray nano-tomography. The 3D morphological analysis on tortuosity showed that the presence of the microporosity can compensate the increase of the diffusion path length due to nanoporosity, which facilitates diffusion within the porous structure. Altogether the focus of the work is to introduce a new strategy to design multiscale porous metals with enhanced transport properties, and sheds light on the fundamental mechanisms on the 3D morphological evolution of the system using advanced synchrotron X-ray nano-tomography for future materials development and applications.

36 MATERIALS SCIENCE↗

Sulfur dimers adsorbed on Au(111) as building blocks for sulfur octomers formation: A density functional study

Experimental scanning tunneling microscopy (STM) studies have shown for more than two decades rectangular formations when sulfur atoms are deposited on Au(111) surfaces. The precursors have ranged from simple molecules or ions, such as SO{sub 2} gas or sulfide anions, to more complex organosulfur compounds. We investigated, within the framework of the Density Functional Theory, the structure of these rectangular patterns assuming them entirely composed of sulfur atoms as the experimental evidence suggests. The sulfur coverage at which the simulations were carried out (0.67 ML or higher) provoked that the sulfur-sulfur association had to be taken into account for achieving a good agreement between the sets of simulated and experimental STM images. A combination of four sulfur dimers per rectangular formation properly explained the trends obtained by the experimental STM analysis which were related with the rectangles' size and shape fluctuations together with sulfur-sulfur distances within these rectangles. Finally, a projected density of states analysis showed that the dimers were capable of altering the Au(5d) electronic states at the same level as atomic sulfur adsorbed at low coverage. Besides, sulfur dimers states were perfectly distinguished, whose presence near and above the Fermi level can explain both: sulfur-sulfur bond elongation and dimers stability when they stayed adsorbed on the surface at high coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen Peroxide‐Induced Overoxidation of Fe−N−C Catalysts: Implications for ORR Activity

Fe−N−C (iron-nitrogen-carbon) electrocatalysts have emerged as promising alternatives to precious metals for the oxygen reduction reaction (ORR), but they remain insufficiently stable for widespread adoption in fuel cell technologies. One plausible mechanism to explain this lack of stability, and the associated catalyst degradation, is oxidative attack on the catalyst surface by hydrogen peroxide, a non-selective byproduct of the ORR. In this work, we perform a detailed analysis of this degradation mechanism, using a combination of periodic Density Functional Theory (DFT) calculations and ab-initio molecular dynamics (AIMD) simulations to probe the thermodynamics and kinetics of hydrogen peroxide activation on a series of candidate active sites for the Fe−N−C catalyst. The results demonstrate that carbon atoms neighbouring FeN 4 active sites can be strongly over-oxidized via formation of hydroxyl or epoxy groups when hydrogen peroxide is present in the electrolyte. In most cases, the interaction between the over-oxidizing groups and the ORR reaction intermediates reduces the ORR activity, and we further propose that the over-oxidized sites are likely precursors to irreversible carbon corrosion and further catalyst deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of a new coordination compound for the preparation of AgI nanoparticles

Graphical abstract: Silver iodide nanoparticles have been sonochemically synthesized by using silver salicylate complex, [Ag(HSal)], as silver precursor. A series of control experiments were carried out to investigate the effects of solvent, surfactant concentration, sonication time and temperature on the morphology of AgI nanostructures. - Highlights: • Silver salicylate as a new precursor was applied to fabricate γ-AgI nanoparticles. • To further decrease the particle size of AgI, SDS was used as surfactant. • The effect of preparation parameters on the particle size of AgI was investigated. - Abstract: AgI nanoparticles have been sonochemically synthesized by using silver salicylate, [Ag(HSal)], as silver precursor. To investigate the effects of solvent, surfactant concentration, sonication time and temperature on the morphology of AgI nanostructures, several experiments were carried out. The products were characterized by SEM, TEM, XRD, TGA/DTA, UV–vis, and FT-IR. Based on the experimental findings in this research, it was found that the size of AgI nanoparticles was dramatically dependent on the silver precursor, sonochemical irradiation, and surfactant concentration. Sodium dodecyl sulfate (SDS) was applied as surfactant. When the concentration of SDS was 0.055 mM, very uniform sphere-like AgI nanoparticles with grain size of about 25–30 nm were obtained. These results indicated that the high concentration of SDS could prevent the aggregation between colloidal nanoparticles due to its steric hindrance effect.

36 MATERIALS SCIENCE↗

Comparing Top-Down Proteoform Identification: Deconvolution, PrSM Overlap, and PTM Detection

Generating top-down tandem mass spectra (MS/MS) for complex mixtures of proteoforms has become possible through improvements in fractionation, on-line separation, dissociation, and mass analysis. The algorithms to match tandem mass spectra to sequences have undergone a parallel evolution, with both spectral alignment and peak matching being paired with diverse methods for scoring proteoform-spectral matches (PrSMs). This study assesses state-of-the-art algorithms for top-down identification through three distinct challenges. The first is identifying a large yield of PrSMs while controlling false discovery rate (FDR) in identifying thousands of proteoforms from complex cell lysates via four software workflows: ProSight Proteome Discoverer, TopPIC, Informed Proteomics, and pTop. The second is the deconvolution of data from both Thermo Orbitrap-class and Bruker maXis Q-TOF instruments to produce consistent precursor charge and mass determinations while generating fragment mass lists to optimize identification. The third attempts to detect diverse post-translational modifications (PTMs) in proteoforms from cow milk and human ovarian tissue. The data demonstrate that existing software suites produce admirable sensitivity, in some cases identifying a third of collected tandem mass spectra with FDR controlled below 2%; the overlap in these PrSMs, however, illustrates real value in searching data with multiple search engines. Differences among identification workflows seem to result from each search algorithm incorporating its own deconvolution algorithm. By transmitting deconvolution data from multiple deconvolution routes (Thermo Xtract, Bruker Auto MSn, Mascot Distiller, TopFD, and FLASHDeconv) to the downstream TopPIC search algorithm, we were able to detect common causes of deconvolution disagreement. The detection of PTMs was very inconsistent among search algorithms, with some workflows suggesting as little as 1% of PrSMs from cow’s milk were singly-phosphorylated while other workflows found that 18% of PrSMs were singly-phosphorylated. Taken together, these results make a strong argument for top-down researchers to adopt a standard practice of analyzing each MS/MS experiment with at least two different search engines.

59 BASIC BIOLOGICAL SCIENCES↗

Spatial Molecular Layer Deposition of Ultrathin Polyamide To Stabilize Silicon Anodes in Lithium-Ion Batteries

Cycling stability is central to implementing silicon (Si) anodes in next-generation high-energy lithium-ion batteries. However, challenges remain due to the lack of effective strategies to enhance the structural integrity of the anode during electrochemical cycling. Here, we develop a nanoscale polyamide coating, using spatial molecular layer deposition (MLD) of m-phenylenediamine and trimesoyl chloride precursors, to preserve the structural integrity of Si anodes. Poly(acrylic acid) (PAA) has been widely used in Si-based anodes as a binding agent due to its effective binding interactions with Si particles. However, the structural integrity of the anode is compromised by thermochemical decomposition of the poly(acrylic acid) binder, which can occur during electrode drying or during electrochemical cycling. Decomposition causes a 62% decrease in the elastic modulus of the Si anode, as measured by nanoindentation in electrolyte-soaked conditions. This study shows that an ultrathin polyamide coating counteracts this structural degradation, increases the elastic modulus of the degraded anode by 345%, and improves cohesion. Electrochemical analysis of polyamide-coated anodes reveals a film thickness dependence in cycling behavior. High overpotentials and fast capacity fading are observed for Si anodes with a 15 nm coating, whereas Si anodes with a 0.5 nm coating demonstrate stable cycling over 150 cycles with a capacity >1400 mAh g-1. Our findings identify polyamide as an effective electrode coating material to enhance structural integrity, leading to excellent cyclability with higher capacity retention. Furthermore, the use of the spatial MLD approach to deposit the coating enables short deposition time and a facile route to scale-up.

25 ENERGY STORAGE↗

Reproducibility and Replication of Experimental Particle Physics Results

Recently, much attention has been focused on the replicability of scientific results, causing scientists, statisticians, and journal editors to examine closely their methodologies and publishing criteria. Experimental particle physicists have been aware of the precursors of non-replicable research for many decades and have many safeguards to ensure that the published results are as reliable as possible. The experiments require large investments of time and effort to design, construct, and operate. Large collaborations produce and check the results, and many papers are signed by more than three thousand authors. This paper gives an introduction to what experimental particle physics is and to some of the tools that are used to analyze the data. It describes the procedures used to ensure that results can be computationally reproduced, both by collaborators and by non-collaborators. It describes the status of publicly available data sets and analysis tools that aid in reproduction and recasting of experimental results. It also describes methods particle physicists use to maximize the reliability of the results, which increases the probability that they can be replicated by other collaborations or even the same collaborations with more data and new personnel. Examples of results that were later found to be false are given, both with failed replication attempts and one with alarmingly successful replications. While some of the characteristics of particle physics experiments are unique, many of the procedures and techniques can be and are used in other fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Final Progress Report for Collaborative Research: Aging of Black Carbon during Atmospheric Transport: Understanding Results from the DOE’s 2010 CARES and 2012 ClearfLo Campaigns

Over the course of this project, we have analyzed data and samples from the Carbonaceous Aerosol and Radiative Effects Study (CARES) and the Clear air for London (ClearfLo) campaign, as well as conducted or participated in laboratory experiments designed to better understand black carbon mixing state and climate-relevant properties. The laboratory campaigns took place at the Pacific Northwest National Laboratory and Carnegie Mellon University to study various climate-relevant aerosol properties of different sources of soot mixing with secondary organic aerosol precursors. Results from some of these activities were summarized in the previous progress report. This final report presents the manuscripts that have been published (many in the period since the last progress report), lists presentations at different conferences based on grant-related activities, and presents some results that are likely to be submitted for publication in the near future.

54 ENVIRONMENTAL SCIENCES↗

Computational Insights into Fuels and Chemicals Extraction from Microbial Biorefineries

Over the past two decades, substantial investments have been made in engineering microorganisms to produce specific fuels and chemicals as part of the global bioeconomy. Many target molecules accumulate intracellularly, and a challenge is how to effectively extract the product from the cells without needing to destroy them due to the barrier imposed by the cell membrane. For some hydrophobic compounds, an organic overlay is an effective strategy for nondestructive product extraction, although the relationship between functional groups on the product and the rate of extraction are not well understood. Through both biased and unbiased molecular dynamics simulations for a range of fatty acyl compounds and terpenoids, we directly compute permeability coefficients for different steps of the extraction process. Via comparative analysis between the calculated permeability coefficients and observed interactions between the compounds and the membrane, we determine how the rate limiting steps vary depending on product chemistry. For instance, fatty aldehydes are found to transfer very rapidly across the membrane bilayer relative to alcohols, although their comparable rate of extraction into the organic phase makes them equally effective at extraction from the cell. In assessing the terpenoids, it is found that in general a modestly hydrophilic product improves desorption rates into an organic phase sufficiently to make up for their lower bilayer crossing rate. With this new insight, we can more effectively engineer microorganisms towards the production of these modestly hydrophilic fuel precursors or chemicals.

09 BIOMASS FUELS↗

Simple and low-temperature preparation of Co{sub 3}O{sub 4} sphere-like nanoparticles via solid-state thermolysis of the [Co(NH{sub 3}){sub 6}](NO{sub 3}){sub 3} complex

Highlights: ► [Co(NH{sub 3}){sub 6}](NO{sub 3}){sub 3} precursor was used for synthesizing pure Co{sub 3}O{sub 4} nanocrystals. ► Co{sub 3}O{sub 4} nanocrystals were synthesized at low temperature of 200 °C. ► Co{sub 3}O{sub 4} nanocrystals show a weak ferromagnetic behavior at room temperature. ► This simple method is low-cost and suitable for high-scale production of Co{sub 3}O{sub 4}. -- Abstract: In this work, spinel-type Co{sub 3}O{sub 4} spherical nanoparticles were easily prepared via decomposition of the hexamminecobalt(III) nitrate complex, [Co(NH{sub 3}){sub 6}](NO{sub 3}){sub 3}, at low temperature (200 °C). The product was characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, UV–vis spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer–Emmett–Teller (BET) specific surface area measurement and magnetic measurements. The results confirmed that pure single-phase Co{sub 3}O{sub 4} nanoparticles with weak ferromagnetic behavior were obtained by this method. TEM images showed that the Co{sub 3}O{sub 4} nanoparticles are sphere-like with an average diameter size of around 15 nm. The optical spectrum indicated two direct band gaps at 2.15 and 3.56 eV which are blue-shifted relative to reported values for the bulk sample. Using this fast and simple method, Co{sub 3}O{sub 4} nanoparticles can be produced without expensive and toxic solvents or complicated equipment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable Aviation Fuel from High-Strength Wastewater via Membrane-Assisted Volatile Fatty Acid Production: Experimental Evaluation, Techno-economic, and Life-Cycle Analyses

To reduce emissions from combustion of fossil fuels, sustainable aviation fuels (SAFs) have the potential to decarbonize the aviation sector. Redirecting wastes from conventional waste management practices and using them as cost-effective feedstocks for low-carbon fuels can reduce emissions from both waste disposal and fuel combustion. One approach is to upgrade wet wastes to SAF precursors, such as volatile fatty acids (VFAs). Here, in this study, novel membrane-assisted arrested methanogenesis was developed to convert high-strength wastewater to VFAs. Based on experimental results of VFA production, techno-economic and life-cycle analyses were conducted to estimate the potential economic and environmental benefits of SAF production from high-strength wastewater via VFAs. By evaluating three proposed scenarios for VFA production, a minimum production cost of VFA is achieved at $\$$0.60/kg VFA at a wastewater flow rate of 1100 MT/d. For the corresponding VFA-derived SAF, the estimated minimum fuel selling price is $\$$4.64/gasoline gallon equivalent. The life-cycle analysis shows that up to a 71% reduction in greenhouse gas emissions can be achieved relative to its fossil-counterpart along with lower water and fossil-fuel consumption.

09 BIOMASS FUELS↗

Chemical identification of new particle formation and growth precursors through positive matrix factorization of ambient ion measurements

Abstract. In the lower troposphere, rapid collisions between ions and trace gases result in the transfer of positive charge to the highest proton affinity species and negative charge to the lowest proton affinity species. Measurements of the chemical composition of ambient ions thus provide direct insight into the most acidic and basic trace gases and their ion–molecule clusters – compounds thought to be important for new particle formation and growth. We deployed an atmospheric pressure interface time-of-flight mass spectrometer (APi-ToF) to measure ambient ion chemical composition during the 2016 Holistic Interactions of Shallow Clouds, Aerosols, and Land Ecosystems (HI-SCALE) campaign at the United States Department of Energy Atmospheric Radiation Measurement facility in the Southern Great Plains (SGP), an agricultural region. Cations and anions were measured for alternating periods of ∼ 24 h over 1 month. We use binned positive matrix factorization (binPMF) and generalized Kendrick analysis (GKA) to obtain information about the chemical formulas and temporal variation in ionic composition without the need for averaging over a long timescale or a priori high-resolution peak fitting. Negative ions consist of strong acids including sulfuric and nitric acid, organosulfates, and clusters of NO3- with highly oxygenated organic molecules (HOMs) derived from monoterpene (MT) and sesquiterpene (SQT) oxidation. Organonitrates derived from SQTs account for most of the HOM signal. Combined with the diel profiles and back trajectory analysis, these results suggest that NO3 radical chemistry is active at this site. SQT oxidation products likely contribute to particle growth at the SGP site. The positive ions consist of bases including alkyl pyridines and amines and a series of high-mass species. Nearly all the positive ions contained only one nitrogen atom and in general support ammonia and amines as being the dominant bases that could participate in new particle formation. Overall, this work demonstrates how APi-ToF measurements combined with binPMF analysis can provide insight into the temporal evolution of compounds important for new particle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High throughput analysis of B cell dynamics and neutralizing antibody development during immunization with a novel clade C HIV-1 envelope

A protective HIV-1 vaccine has been hampered by a limited understanding of how B cells acquire neutralizing activity. Our previous vaccines expressing two different HIV-1 envelopes elicited robust antigen specific serum IgG titers in 20 rhesus macaques; yet serum from only two animals neutralized the autologous virus. Here, we used high throughput immunoglobulin receptor and single cell RNA sequencing to characterize the overall expansion, recall, and maturation of antigen specific B cells longitudinally over 90 weeks. Diversification and expansion of many B cell clonotypes occurred broadly in the absence of serum neutralization. However, in one animal that developed neutralization, two neutralizing B cell clonotypes arose from the same immunoglobulin germline and were tracked longitudinally. Early antibody variants with high identity to germline neutralized the autologous virus while later variants acquired somatic hypermutation and increased neutralization potency. The early engagement of precursors capable of neutralization with little to no SHM followed by prolonged affinity maturation allowed the two neutralizing lineages to successfully persist despite many other antigen specific B cells. The findings provide new insight into B cells responding to HIV-1 envelope during heterologous prime and boost immunization in rhesus macaques and the development of selected autologous neutralizing antibody lineages.

60 APPLIED LIFE SCIENCES↗

Assembly of three organic–inorganic hybrid supramolecular materials based on reduced molybdenum(V) phosphates

Three supramolecular materials based on (P{sub 4}Mo{sub 6}) polyoxoanions, (Hbbi){sub 2}(H{sub 2}bbi)[Cu{sub 3}Mo{sub 12}{sup V}O{sub 24}(OH){sub 6}(H{sub 2}O){sub 6}(HPO{sub 4}){sub 4}(H{sub 2}PO{sub 4}){sub 2}(PO{sub 4}){sub 2}]·3H{sub 2}O (1), (Hbbi){sub 2}(H{sub 2}bbi)[Ni{sub 3}Mo{sub 12}{sup V}O{sub 24}(OH){sub 6}(H{sub 2}O){sub 2}(HPO{sub 4}){sub 4}(H{sub 2}PO{sub 4}){sub 2}(PO{sub 4}){sub 2}]·9H{sub 2}O (2), (Hbpy)(bpy){sub 3}[Ni{sub 2}(H{sub 2}O){sub 10}Na(PCA){sub 2}][NiMo{sub 12}{sup V}O{sub 24}(OH){sub 6}(H{sub 2}PO{sub 4}){sub 6}(PO{sub 4}){sub 2}]·6H{sub 2}O (3) (bbi=1,1′-(1,4-butanediyl)bis(imidazole), bpy=4,4′-bipyridine, PCA=pyridine-4-carboxylic acid), have been hydrothermally synthesized and structurally characterized by the elemental analysis, TG, IR, UV–vis, PXRD and the single-crystal X-ray diffraction. Compounds 1 and 2 exhibit covalent 1-D chains constructed from M[P{sub 4}Mo{sub 6}]{sub 2} dimeric cluster and (M(H{sub 2}O){sub n}) (M=Cu, n=3 for 1 and M=Ni, n=1 for 2) linker. Compound 3 possesses an unusual POMMOF supramolecular layers based on [Ni(P{sub 4}Mo{sub 6})]{sub 2} dimeric units and 1-D metal–organic strings [Ni(H{sub 2}O){sub 5}Na(PCA)]{sub n}, in which an in situ ligand of PCA from 1,3-bis(4-pyridyl)propane (bpp) precursor was observed. Furthermore, the electrochemical behavior of 1–3-CPE and magnetic properties of 1–3 have been investigated in detail. - Graphical abstract: As new linking unit, Cu(H{sub 2}O){sub 3}, Ni(H{sub 2}O), and (Ni{sub 2}(H{sub 2}O){sub 10}Na(PCA){sub 2}) are introduced into (TM(P{sub 4}Mo{sub 6}){sub 2}) reaction systems to assemble three supramolecular materials under hydrothermal conditions via changing organic ligand and transition metal. - Highlights: • Tree new supramolecular hybrids based on (P{sub 4}Mo{sub 6}) cluster are reported. • Cu(H{sub 2}O){sub 3} and Ni(H{sub 2}O) as linker are introduced into the (TM(P{sub 4}Mo{sub 6}){sub 2}) systems. • 3 shows unusual layers based on [Ni(P{sub 4}Mo{sub 6})]{sub 2} and 1-D chains [Ni(H{sub 2}O){sub 5}Na(PCA)]{sub n}. • An in situ ligand of PCA from bpp precursor was observed in 3. • The electrochemical and magnetic properties of 1–3 have been studied in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Some insights into formamide formation through gas-phase reactions in the interstellar medium

We study the viability of different gas-phase ion-molecule reactions that could produce precursors of formamide in the interstellar medium. We analyze different reactions between cations containing a nitrogen atom (NH{sub 3}{sup +}, NH{sub 4}{sup +}, NH{sub 3}OH{sup +}, and NH{sub 2}OH{sup +}) and neutral molecules having one carbonyl group (H{sub 2}CO and HCOOH). First, we report a theoretical estimation of the reaction enthalpies for the proposed processes. Second, for more favorable reactions, from a thermodynamic point of view, we perform a theoretical study of the potential energy surface. In particular, the more exothermic processes correspond to the reactions of ionized and protonated hydroxylamine with formaldehyde. In addition, a neutral-neutral reaction has also been considered. The analysis of the potential energy surfaces corresponding to these reactions shows that these processes present a net activation barrier and that they cannot be considered as a source of formamide in space.

79 ASTRONOMY AND ASTROPHYSICS↗