Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Transparent superhydrophobic surfaces using a spray coating process

One significant maintenance problem and cost associated with solar energy conversion systems is the soiling due to the accumulation of dust and other pollutants. Here in this work, we describe a scalable approach for applying antisoiling coatings based on superhydrophobic (SH) silica particles using a spray coating process. A large water contact angle (WCA) is one of the characteristics of excellent SH surfaces and because of the low surface energy and low adhesion forces the soiling rate is reduced. Our findings indicate that the WCA depends strongly on the ratio of the polymer binder and the nanoparticles. The nanoparticle surface coverage of the spray coated samples was substantially improved after rinsing with solvent. This process tended to remove large aggregates and excess polymer binder and further increased the WCA by allowing exposure of the functionalized nanoparticles. The durability of the SH coatings was enhanced when the substrate was pretreated with polymer binder and an optimal curing time between 30 and 60 min. The abrasion tests of the SH coatings we report in this study showed that the WCA decreased from ~ 166° to ~ 157° after exposure to 2.6 g of sand. Such coatings will help reduce costs of periodic cleaning of solar energy conversion systems (photovoltaic panels and concentrated solar mirrors).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cloud-Scale Droplet Number Sensitivity to Liquid Water Path in Marine Stratocumulus

Cloud droplet number concentration (N c ) is retrieved from remotely observed marine stratocumulus cloud liquid water path (LWP), cloud optical depth (τ c ), and cloud thickness, using an optical model that assumes liquid water content (LWC) increases linearly from cloud base. Assuming that LWC is vertically uniform would underestimate τ c by 5% and N c by 14%. Individual retrievals of N c from 10-min averages vary by orders of magnitude from long-term averages. Surface cloud condensation nuclei (CCN) number concentration N CCN is weakly but significantly correlated with N c (R = 0.3) for the day leading and 6 hr following N c . Consistent with coalescence and drizzle scavenging cloud droplets, lag correlations show that N c decreases for 1 hr after the peak area-average rain rate. Greater observed LWP for lower N c [d(log N c )/d(log LWP) = 2.3] is consistent with enhanced entrainment drying of clouds with greater N c and consistent with removal of N c by thicker clouds with more coalescence and drizzle. Stronger precipitation in clouds with greater N c is the opposite sensitivity as expected were LWP to be controlled by the “cloud lifetime” indirect aerosol effect. The strong sensitivity of N c to LWP suggests that cloud dynamic and thermodynamic forcings drive macrophysical variability that controls N c in southeastern tropical Pacific stratocumulus clouds. Regressions are relatively insensitive to assumptions about the covariance of errors among the sensors.

54 ENVIRONMENTAL SCIENCES↗

The influence of curvature on domain distribution in binary mixture membranes

Curvature-induced domain sorting, a strategy exploited by cells to organize membrane components, is a promising mechanism to control self-assembly of materials. To comprehend this phenomenon, we explore the effects of curvature on component rearrangement in thin polymer films and lipid bilayers supported on sinusoidal substrates. Self-consistent field theory (SCFT), specifically, was used to study the spatial distribution of polymers in blends containing conformationally asymmetric chains. In addition, coarse-grained molecular dynamics (MD) simulations were used to probe the arrangement of rigid lipid domains in a relatively soft lipid matrix. Besides the expected preference of rigid species localizing in regions with low mean curvature, both systems exhibit unexpected localization of rigid components in comparatively high curvature regions. The origins of this unexpected sorting are discussed in terms of entropic and enthalpic contributions. In summary, this study demonstrates that domain distribution strongly depends on local topography and further highlights the collective effects that thermodynamic forces have on the morphological behavior of membranes.

36 MATERIALS SCIENCE↗

Nonthermal effects on the Karpman-Washimi ponderomotive magnetization in Lorentzian plasmas

The nonthermal effects on the Karpman-Washimi ponderomotive magnetization are investigated in Lorentzian plasmas. The induced magnetization due to the nonstationary ponderomotive interaction related to the time variation of the field intensity is obtained as a function of the Debye length and spectral index. It is shown that the nonthermal character of the Lorentzian plasma suppresses the cyclotron frequency due to the ponderomotive interactions. It is also shown that the Karpman-Washimi magnetization enhances with increasing the spectral index and scaled wave number. In addition, it is found that the ponderomotive magnetizations in Lorentzian plasmas are always smaller than those in Maxwellian plasmas due to the nonthermal effects. It is also shown that the nonthermal character strongly suppresses the total energy radiated due to the Karpman-Washimi ponderomotive force in Lorentzian plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct writing of ferroelectric domains on strontium barium niobate crystals using focused ultraviolet laser light

We report ferroelectric domain inversion in strontium barium niobate (SBN) single crystals by irradiating the surface locally with a strongly focused ultraviolet (UV) laser beam. The generated domains are investigated using piezoresponse force microscopy. We propose a simple model that allows predicting the domain width as a function of the irradiation intensity, which indeed applies for both SBN and LiNbO{sub 3}. Evidently, though fundamentally different, the domain structure of both SBN and LiNbO{sub 3} can be engineered through similar UV irradiation.

36 MATERIALS SCIENCE↗

Current sheets and pressure anisotropy in the reconnection exhaust

A particle-in-cell simulation shows that the exhaust during anti-parallel reconnection in the collisionless regime contains a current sheet extending 100 inertial lengths from the X line. The current sheet is supported by electron pressure anisotropy near the X line and ion anisotropy farther downstream. Field-aligned electron currents flowing outside the magnetic separatrices feed the exhaust current sheet and generate the out-of-plane, or Hall, magnetic field. Existing models based on different mechanisms for each particle species provide good estimates for the levels of pressure anisotropy. The ion anisotropy, which is strong enough to reach the firehose instability threshold, is also important for overall force balance. It reduces the outflow speed of the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Novel chemical species of Santilli’s magnegas in hadronic chemistry

In this paper we have reviewed the novel chemical species, the magnecules, synthesized by Santilli that comprises of individual atoms, radicals and ordinary molecules bonded through the magnetic attractive forces originating out of toroidal polarization of the orbitals of atomic electrons under strong magnetic fields. The main focus of this paper is to review the fabulous applications of Santill’s magnegas. The novel magnecular species of hydrogen and oxygen find their place in fuel industry especially in fuel cells with the increase in its power, efficiency and total output. In this account we have also considered the flame temperature report of the new magnecular species of gases. We emphasize the importance of this new field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stark-assisted quantum confinement of wavepackets. A coupling of nonadiabatic interaction and CW-laser

When a nonadiabatic system that has an ionic state (large dipole moment) and a covalent state (small dipole moment) is located in a strong laser field, the crossing point of the two potential energy curves is forced to oscillate due to the oscillating laser field and to meet wavepackets moving on the potential curves many times. This leads to additional transitions between the two states, and under favorable conditions, the wavepacket may be confined in a spatial region rich in nonadiabatic interaction. In this paper, taking the LiF molecule system in a continuous-wave driving field as a prototypical example, the dynamical origins of the wavepacket confinement are theoretically investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TEMPORAL AND PHYSICAL CONNECTION BETWEEN CORONAL MASS EJECTIONS AND FLARES

The physical connection between the eruption of coronal mass ejections (CMEs) and associated flare energy release is examined. The trajectories of five CMEs are determined using LASCO/SOHO or SECCHI/STEREO data, and the associated soft X-ray (SXR) light curves are obtained from GOES 1-8 A data. As the theoretical description of CME physics, the existing erupting flux-rope model is used in which an initial flux rope is driven out of equilibrium by the increasing poloidal magnetic flux {Phi}{sub p}(t) (poloidal 'flux injection'). Mathematically, this is represented by d{Phi}{sub p}(t)/dt. For each CME, this function is adjusted to obtain the solution that best fits the observed height-time data. The resulting d{Phi}{sub p}(t)/dt is shown to be strongly constrained by the CME height data. This function and the attendant electromotive force (EMF) given by E(t){identical_to}-(1/c)d{Phi}{sub p}(t)/dt constitute predictions of the theory for each CME trajectory. It is shown that the best-fit solutions fit the CME trajectories within 1%-2% of the CME height data and that the temporal profile of the predicted d{Phi} {sub p}(t)/dt is correlated with that of the associated X-ray light curve regardless of the flare duration. Specifically, we find that the observed duration of SXR emission {Delta}T{sub SXR} is comparable to and scales with the predicted duration {Delta}T{sub p} of poloidal flux injection, i.e., {Delta}T{sub SXR} {approx_equal} {Delta}T{sub p} . Neither the predicted d{Phi} {sub p}(t)/dt nor the input CME height data contain any information on X-ray data. Thus, the correlation is nontrivial, constituting evidence that poloidal flux injection is physically connected to flare energy release. It is suggested that this connection is provided by the EMF that produces electric fields to accelerate particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Entanglement maximization in low-energy neutron-proton scattering

The entanglement properties of neutron-proton scattering are investigated using a measure that counts the number of entangled pairs produced by the action of a scattering operator on a given initial neutron-proton state. All phase shifts relevant for scattering at laboratory energies up to 350 MeV are used. Entanglement is found to depend strongly on the initial state. Entanglement is maximized in very low energy scattering if the initial spin state is | ↑ ↓ >, but not if the initial state is | ↑ ↑ > . At such energies the Hamiltonian obeys Wigner SU(4) symmetry, and an entanglement maximum is a sign of that symmetry. At higher energies the angular dependence of entanglement is strong and the entanglement is large for many scattering angles. Furthermore, the tensor force is shown to play a significant role in producing entanglement at laboratory kinetic energies greater than about 50 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Source–Receptor Perspective on the Polar Hydrologic Cycle: Sources, Seasonality, and Arctic–Antarctic Parity in the Hydrologic Cycle Response to CO 2 Doubling

Numerical water tracers implemented in a global climate model are used to study how polar hydroclimate responds to CO 2 -induced warming from a source–receptor perspective. Although remote moisture sources contribute substantially more to polar precipitation year-round in the mean state, an increase in locally sourced moisture is crucial to the winter season polar precipitation response to greenhouse gas forcing. In general, the polar hydroclimate response to CO 2 -induced warming is strongly seasonal: over both the Arctic and Antarctic, locally sourced moisture constitutes a larger fraction of the precipitation in winter, while remote sources become even more dominant in summer. Increased local evaporation in fall and winter is coincident with sea ice retreat, which greatly augments local moisture sources in these seasons. In summer, however, larger contributions from more remote moisture source regions are consistent with an increase in moisture residence times and a longer moisture transport length scale, which produces a robust hydrologic cycle response to CO 2 -induced warming globally. The critical role of locally sourced moisture in the hydrologic cycle response of both the Arctic and Antarctic is distinct from controlling factors elsewhere on the globe; for this reason, great care should be taken in interpreting polar isotopic proxy records from climate states unlike the present.

Antarctic↗

Seismic Technology Adapted to Analyzing and Developing Geothermal Systems Below Surface-Exposed High-Velocity Rocks Final Report

The objective of our research was to develop and demonstrate seismic data-acquisition and data-processing technologies that allow geothermal prospects below high-velocity rock outcrops to be evaluated. To do this, we acquired a 3-component seismic test line across an area of exposed high-velocity rocks in Brewster County, Texas, where there is high heat flow and surface conditions mimic those found at numerous geothermal prospects. Seismic contractors have not succeeded in creating good-quality seismic data in this area for companies who have acquired data for oil and gas exploitation purposes. Our test profile traversed an area where high-velocity rocks and low-velocity sediment were exposed on the surface in alternating patterns that repeated along the test line. We verified that these surface conditions cause non-ending reverberations of Love waves, Rayleigh waves, and shallow critical refractions to travel across the earth surface between the boundaries of the fast-velocity and slow-velocity material exposed on the surface. These reverberating surface waves form the high level of noise in this area that does not allow reflections from deep interfaces to be seen and utilized. Our data-acquisition method of deploying a box array of closely spaced geophones allowed us to recognize and evaluate these surface-wave noise modes regardless of the azimuth direction to the surface anomaly that backscattered the waves and caused them to return to the test-line profile. With this knowledge of the surface-wave noise, we were able to process these test-line data to create P-P and SH-SH images that were superior to those produced by a skilled seismic data-processing contractor. Compared to the P-P data acquired along the test line, the SH-SH data provided a better detection of faults and could be used to trace these faults upward to the boundaries of exposed surface rocks. We expanded our comparison of the relative value of S-wave and P-wave seismic data for geothermal applications by inserting into this report a small part of the interpretation we have done with 3C3D data across Wister geothermal field in the Imperial Valley of California. This interpretation shows that P-SV data reveal faults (and by inference, also fractures) that cannot be easily, or confidently, seen with P-P data, and that the combination of P-P and P-SV data allows VP/VS velocity ratios to be estimated across a targeted reservoir interval to show where an interval has more sandstone (the preferred reservoir facies). The conclusion reached from this investigation is that S-wave seismic technology can be invaluable to geothermal operators. Thus we developed a strong interest in understanding the direct-S modes produced by vertical-force sources, particularly vertical vibrators, because if it can be demonstrated that direct-S modes produced by vertical-force sources can be used as effectively as the direct-S modes produced by horizontal-force sources, geothermal operators can acquire direct-S data across many more prospect areas than can be done with horizontal-force sources, which presently are limited to horizontal vibrators. We include some of our preliminary work in evaluating direct-S modes produced by vertical-force sources.

15 GEOTHERMAL ENERGY↗

Biomimetic catalysts responsive to specific chemical signals

Part 1. Design of Biomimetic Catalysts Based on Amphiphilic Systems The overall objective of our research is to create biomimetic catalysts from amphiphilic molecules. More specifically, we aim to create supramolecular systems that can be used to control the microenvironment around a catalytic center in a biomimetic fashion and apply the learning to construct supramolecular catalysts with novel functions found in enzymatic catalysts. We have prepared synthetic molecules (i.e., foldamers) that could fold into helical structures with nanometer-sized internal hydrophilic cavities. Cavities of this size are typically observed only in the tertiary and quaternary structures of proteins but were formed in our foldamer prepared in just a few steps from the monomer. Similar to many proteins, our foldamers displayed cooperativity in the folding/unfolding equilibrium and followed a two-state conformational transition. In addition, their conformational change could be triggered by solvent polarity, pH, or presence of metal ions and certain organic molecules. We studied their environmentally dependent conformational changes in solutions, surfactant micelles, and lipid bilayer membranes. Unlike conventional rigid supramolecular host, a foldamer undergoes conformational change during guest binding. Our study in the molecular recognition of an oligocholate host yielded some extremely exciting results. Cooperativity between host conformation and host–guest interactions was found to “magnify” weak binding interactions. In other words, since binding affinity is determined by the overall change of free energy during the binding, guest-induced conformational change of the host, whether near or far from the binding site, affects the binding. This study has strong implications in catalysis because enzymes have been hypothesized to harvest similar intramolecular forces to strengthen their binding with the transition state of an enzyme-catalyzed reaction. The supramolecular and amphiphilic principles used in the foldamer catalysts were extended to a few other systems, particularly to interfacially cross-linked reverse micelles and micelles. These features enabled unusual catalytic features such as basic/nucleophilic catalysis under acidic conditions. We were able to create highly active metal nanoclusters catalysts whose local environment could be tuned by the organic framework. We were even able to create a “catalytic nanomachine” that grabs the substrate to the encapsulated Au clusters, which efficiently convert the substrate to the product that is rapidly ejected due to its different binding properties. Our research has important impacts on fundamental and applied energy-related sciences. On the fundamental level, it tests important biocatalytic principles on relatively simple synthetic systems and is expected to afford deeper understanding of biological catalysis. On the practical level, the research is anticipated to lead to “smart” catalysts and open up exiting applications in chemical analysis, reaction control, and materials synthesis. Part 2. Electrochemical Reduction of CO₂ The primary objective of our research involving the electrochemical reduction of carbon dioxide is to apply a multidisciplinary approach toward developing a greater understanding of the problem of efficiently converting CO₂ to hydrocarbons through electrochemical routes. Our goal is to provide a better understanding of the principles that underlie the electrocatalytic reduction of CO₂ at electrode surfaces and the molecular pathways that lead to desired compounds. This understanding is essential for the design and development of new catalytic materials for the selective production of renewable feedstocks. The electrochemical reduction of CO₂ involves the formation of various reaction products and adsorbed intermediates whose distribution depends upon the nature of the electrode material and the electrochemical conditions, including applied potential, solvent, and electrolyte, used during reduction. Our efforts are focused on developing a detailed picture of how these various parameters impact the reaction pathway for CO₂ reduction and to tune this reaction to favor the formation of specific products by careful selection of electrode materials and reaction conditions. Our experimental plan includes a detailed examination of the electrode material as well as a quantitative evaluation of the reaction conditions using several in-situ analysis tools that give a direct measure of adsorbed and solution species that appear during CO₂ reduction. During the first year of funding for this aspect of the project, we have developed an on-line electrochemical measurement tool utilizing membrane-introduction mass spectrometry to detect reactions products directly during the electrochemical reduction of CO₂on various sputtered electrode materials. In addition, we have examined the role of a selection of different electrode compositions (including single component and binary electrodes) on product distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamical Inference and 3D Imaging of Magnetized Dusty Plasmas

This is the final technical report for this DOE award. The motion of dust particles in a laboratory plasma has been studied for nearly 30 years and has led to the discovery of strongly-coupled crystalline structures and nonequilibrium dynamics governed by gravitational, hydrodynamic, and electrostatic forces. Many of the inter-particle forces are complex; they can be non-reciprocal, and non-additive. Deciphering the mélange of particle interactions has been a challenging task, nevertheless, magnetized dusty plasmas remains an open challenge with limited understanding. With applications ranging from magnetically-confined plasmas for fusion to near-surface planetary environments, this research field is ripe for well-controlled, laboratory experiments and new theoretical tools. In collaboration with the MDPX experiment at Auburn University, this proposal aims to tease apart both the known and unknown forces that drive dusty plasmas in magnetized environments using high-resolution, three-dimensional imaging and particle tracking coupled with modern dynamical inference and machine learning techniques.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deeply Virtual Compton Scattering at Hall A, Jefferson Lab

The Standard Model of particle physics de?nes quarks and leptons as the basic building blocks of all matter. The interaction between them are mediated by force carrying gauge bosons. Quantum Chromo Dynamics (QCD), the theory that explains the strong interaction is still not complete enough to derive the physical observables of a Quark-Gluon system from the fundamental degrees of freedom of its constituents. Experimentally observable single particle densities provide important insights into our understanding of the quark-gluon system and hence help fill in the gaps of QCD. Generalized Parton Distributions (GPDs) provide simultaneous information of both spacial and longitudinal momentum distributions of constituents of a quark-gluon system. Deeply Virtual Compton Scattering (DVCS) is understood to be the simplest and cleanest process to access GPDs. Even though the exclusive DVCS is simple to understand, the experimental process however, is complex with the Bethe-Heitler and e + p ? e + ? + N? being in the mix of the electron proton scattering e+p ? e+?+X. Over the years, 3 generations of DVCS experiments have been conducted in the Experimental Hall-A of Thomas Jefferson National Accelerator Facility (JLab). This thesis presents the extraction of DVCS cross section in 9 total kinematic points from the 3rd generation experiment (DVCS3) conducted after the 12 GeV upgrade of the Continuous Electron Beam Accelerator Facility (CEBAF) of JLab during Fall 2014 - Fall 2016.

Hashir Rashad, Mohamed Nuhman↗

Using CESM-RESFire to understand climate–fire–ecosystem interactions and the implications for decadal climate variability

Large wildfires exert strong disturbance on regional and global climate systems and ecosystems by perturbing radiative forcing as well as the carbon and water balance between the atmosphere and land surface, while short- and long-term variations in fire weather, terrestrial ecosystems, and human activity modulate fire intensity and reshape fire regimes. The complex climate–fire–ecosystem interactions were not fully integrated in previous climate model studies, and the resulting effects on the projections of future climate change are not well understood. Here we use the fully interactive REgion-Specific ecosystem feedback Fire model (RESFire) that was developed in the Community Earth System Model (CESM) to investigate these interactions and their impacts on climate systems and fire activity. We designed two sets of decadal simulations using CESM-RESFire for present-day (2001–2010) and future (2051–2060) scenarios, respectively, and conducted a series of sensitivity experiments to assess the effects of individual feedback pathways among climate, fire, and ecosystems. Our implementation of RESFire, which includes online land–atmosphere coupling of fire emissions and fire-induced land cover change (LCC), reproduces the observed aerosol optical depth (AOD) from space-based Moderate Resolution Imaging Spectroradiometer (MODIS) satellite products and ground-based AErosol RObotic NETwork (AERONET) data; it agrees well with carbon budget benchmarks from previous studies. We estimate the global averaged net radiative effect of both fire aerosols and fire-induced LCC at –0.59±0.52 W m –2 , which is dominated by fire aerosol–cloud interactions (–0.82±0.19 W m –2 ), in the present-day scenario under climatological conditions of the 2000s. The fire-related net cooling effect increases by ~170 % to –1.60±0.27 W m –2 in the 2050s under the conditions of the Representative Concentration Pathway 4.5 (RCP4.5) scenario. Such considerably enhanced radiative effect is attributed to the largely increased global burned area (+19 %) and fire carbon emissions (+100 %) from the 2000s to the 2050s driven by climate change. The net ecosystem exchange (NEE) of carbon between the land and atmosphere components in the simulations increases by 33 % accordingly, implying that biomass burning is an increasing carbon source at short-term timescales in the future. High-latitude regions with prevalent peatlands would be more vulnerable to increased fire threats due to climate change, and the increase in fire aerosols could counter the projected decrease in anthropogenic aerosols due to air pollution control policies in many regions. We also evaluate two distinct feedback mechanisms that are associated with fire aerosols and fire-induced LCC, respectively. On a global scale, the first mechanism imposes positive feedbacks to fire activity through enhanced droughts with suppressed precipitation by fire aerosol–cloud interactions, while the second one manifests as negative feedbacks due to reduced fuel loads by fire consumption and post-fire tree mortality and recovery processes. These two feedback pathways with opposite effects compete at regional to global scales and increase the complexity of climate–fire–ecosystem interactions and their climatic impacts.

54 ENVIRONMENTAL SCIENCES↗

Some stability and control aspects of airframe/propulsion system interactions on the YF-12 airplane

Airframe/propulsion system interactions can strongly affect the stability and control of supersonic cruise aircraft. These interactions generate forces and moments similar in magnitude to those produced by the aerodynamic controls, and can cause significant changes in vehicle damping and static stability. This in turn can lead to large aircraft excursions or high pilot workload, or both. For optimum integration of an airframe and its jet propulsion system, these phenomena may have to be taken into account.

Berry, D. T.↗