Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices

Perovskite solar cells (PSCs) exhibited remarkable progress for small aperture area cells, however, the performance of its counterpart, large aperture area cells, lags due to non-uniform and defective perovskite layers. Here, we fabricate reproducible large area homogeneous perovskite films at room temperature and without controlling humidity (up to 40 % RH) with a slot die coater on a c-TiO 2 layer deposited using a large area chemical bath. A new artificial peptide – sulfonyl-γ-AApeptide (F-GLU-S) was employed to modify the slot-die coated perovskite surface, grain boundaries and electronic defects. The multi-functional F-GLU-S with carbonyl, carboxyl, sulfonyl, benzene, and chloro groups was capable of strongly interacting with the perovskite layer and repairing the uncoordinated Pb 2+ ions and halide vacancies. As a result, both the electron and hole densities of defects were significantly suppressed; consequently, the non-radiative recombination was effectively suppressed for the modified device which can be explicitly seen in the device performance where both V oc and FF of the modified device improved considerably. Therefore, F-GLU-S modified slot-die coated MAPbI 3 – based devices demonstrated outstanding performance of 21.44 % PCE with a V oc of 1.13 V, J sc of 24.64 cm –2 , and FF 76.99 %. Furthermore, F-GLU-S passivation impeded the infiltration of moisture and oxygen due to its hydrophobic nature and defect repair potential. As a result, the modified device retained above 92 % of its original PCE after 720 h in air (room temperature and 40–60 % RH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative and bifunctional Ga-Ca-Cr 2 O 3 @CaO structured monoliths as versatile platform for reactive capture of CO 2 and its subsequent conversion to ethylene

Cooperative and bifunctional materials (BFMs) that integrate adsorbents and catalysts offer a promising strategy for the reactive capture of CO 2 to produce valuable fuels and chemicals. In this study, we developed structured BFMs via 3D printing that combine CaO as an adsorbent with Ga–Ca–Cr 2 O 3 metal oxides as the catalyst for the reactive capture of CO 2 and its subsequent conversion to C 2 H 4 via the oxidative dehydrogenation of C 2 H 6 (CO 2 -ODHE). Three different Ga–Ca compositions were used to modify the catalyst surface characteristics and enhance C 2 H 4 selectivity. In these formulations, Ga ions stabilize the oxygen lattice of the BFM, while Ca ions interact strongly with Cr to form CaCrO 4 , thereby altering the oxygen species and enhancing the material’s basic properties. Under adsorption–reaction conditions at 600–650 °C, the optimal BFM achieved an excellent C 2 H 4 selectivity of 96.4 %, attributed to a balanced redox process and improved basicity that facilitate efficient C 2 H 6 conversion and rapid desorption of C 2 H 4 without excessive oxidation. Overall, this work provides new insights into the formulation of BFMs monoliths and highlights the critical role of catalytic surface modification in enhancing C 2 H 4 selectivity in the CO 2 -ODHE reactive capture process.

C2H4 production↗

Biphasic solvents for post-combustion CO 2 capture from natural gas flue Gas

Fossil fuel fired power plants are generally expected to remain one of the most significant global sources of electricity for decades to come. Consequently, carbon management technologies are needed to reduce or eliminate ongoing emissions from these sources. Amongst the many techniques for carbon capture, aqueous amine-based absorbents (monoethanolamine, MEA, in particular) are, presently, considered the leading technology for post-combustion CO 2 point-source capture. These technologies are nevertheless limited by their high capital and regeneration energy costs. Biphasic solvents have been identified as an attractive alternative to traditional MEA based absorbents due to their potential energy savings. Thus far, however, the research on biphasic solvents has largely focused on their performance in coal flue gas while more dilute natural gas flue gas applications have received relatively little attention. Here, this work examines the performances of two novel biphasic solvent blends, diethylenetriamine (DETA) and triethylenetetramine (TETA), in CO 2 capture from a natural gas flue gas simulant. Across several regeneration tests, both solvents achieved considerable energy savings over the benchmark MEA solution. Specifically, the energy consumption per mol CO 2 recovered for the DETA-based and TETA-based solvents was 46 % and 35 % less than that of the benchmark MEA solution, respectively. Molecular dynamics simulations were also performed to gain a deeper understanding of the phase separation phenomena that occur as a consequence of CO 2 absorption. These simulations indicated that phase change was driven by the strong interaction between the absorption products and water, while the degree of separation depended on the CO 2 loading.

Biphasic solvents↗

Advantages of tandem versus simultaneous operation: The case of isomerization/hydrogenation of terpinolene epoxide to Terpinen-4-ol using a Ni/TiO 2 -SiO 2 bifunctional catalyst

The conversion of terpinolene epoxide to terpinen-4-ol is a desirable chemical transformation for the production of a valuable intermediate. Here this report describes a one-pot, two-step system for the reaction that uses a bifunctional Ni/TiO 2 -SiO 2 catalyst with isomerization and hydrogenation capabilities. The TiO 2 -SiO 2 serves to isomerize the starting epoxide. The Ni component works to hydrogenate the allylic double bond. The tandem system achieves a high 64% yield of terpinen-4-ol. X-ray diffraction analysis showed that TiO 2 -SiO 2 was a mixed binary oxide, and Fourier transform infrared spectroscopy of adsorbed pyridine suggested that acid sites were mainly Lewis acid sites. Electron microscopy showed that the Ni/TiO 2 -SiO 2 catalyst consisted of spherical particles comprising a titanosilicate phase with highly dispersed zero-valent Ni or anatase on the surface. Additionally, there was strong interaction between Ni and the TiO 2 -SiO 2 mixed oxides. Control kinetic experiments demonstrated that the tandem use of the catalysts was more effective than simultaneous operation.

42 ENGINEERING↗

“Green" approach for self-assembly of platinum nanoparticles into nanowires in aqueous glucose solutions

A completely "green" synthetic approach has been developed for the reduction and stabilization of Pt nanoparticles followed by self-assembly into nanowires in an aqueous alpha-D-glucose solution. Hydrothermal treatment initiated the reduction of Pt(IV) ions dispersed in a pH 8.0 alpha-D-glucose solution in. Reduced Pt nanoparticles were stabilized with oxidized glucose molecules. The Pt nanoparticles continued growing into nanowires followed by transformation into cubic nanocrystals with a rough needle surface. Evidence from TEM and FT-IR spectra reveal that carboxylate groups, which are generated by the oxidation of alpha-D-glucose, strongly interact with and stabilize the surface of these Pt nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superior wear resistance of diamond and DLC coatings

As the hardest known material, diamond and its coatings continue to generate significant attention for stringent applications involving extreme tribological conditions. Likewise, diamond-like carbon (DLC, especially the tetragonal amorphous carbon, ta-C) coatings have also maintained a high level interest for numerous industrial applications where efficiency, performance, and reliability are of great importance. Additionally, the strong covalent bonding or sp 3 -hybridizaiton in diamond and ta-C coatings assures high mechanical hardness, stiffness, chemical and thermal stability that make them well-suited for harsh tribological conditions involving high-speeds, loads, and temperatures. In particular, unique chemical and mechanical nature of diamond and ta-C surfaces plays an important role in their unusual friction and wear behaviors. As with all other tribomaterials, both diamond and ta-C coatings strongly interact with the chemical species in their surroundings during sliding and hence produce a chemically passive top surface layer which ultimately determines the extent of friction and wear. Thick micro-crystalline diamond films are most preferred for tooling applications, while thinner nano/ultranano-crysalline diamond films are well-suited for mechanical devices ranging from nano- (such as NEMS) to micro- (MEMS and AFM tips) as well as macro-scale devices including mechanical pump seals. The ta-C coatings have lately become indispensable for a variety of automotive applications and are used in very large volumes in tappets, piston pins, rings, and a variety of gears and bearings, especially in the Asian market. This paper is intended to provide a comprehensive overview of the recent developments in tribology of super-hard diamond and DLC (ta-C) films with a special emphasis on their friction and wear mechanisms that are key to their extraordinary tribological performance under harsh tribological conditions. Finally, based on the results of recent studies, the paper will also attempt to highlight what lies ahead for these films in tribology and other demanding industrial applications.

36 MATERIALS SCIENCE↗

Fluorescent detection of cholesterol using p-Sulfonatocalix[4]arene functionalized carbon nanotubes and thermally reduced graphite oxide composites

In the present study, carbon nanotube (CNT), thermally reduced graphite oxide (TRGO), and CNT-TRGO were functionalized with p-sulfonatocalix[4]arene (SC4) and then investigated for fluorescent detection of cholesterol in the presence of rhodamine 6G (R6G). All of the composite samples show effective quenching of R6G fluorescent intensity without cholesterol, but the fluorescence intensity significantly increases with the addition of cholesterol. The results indicate a strong interaction between SC4 composites and cholesterol rather than between the SC4 composites and R6G, increasing R6G fluorescence intensity in the presence of cholesterol due to the release of R6G from the SC4 composites. Formation of the complex, made of the SC4 composite plus the cholesterol, enables the detection of cholesterol in the wide range of cholesterol concentration up to 109 µM. The binding constant between SC4 and cholesterol has been calculated, indicating that the SC4 composites display the maximum binding constant of 1.9 × 10 4 M -1 with cholesterol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous sample-rotated small angle x-ray scattering and electrochemical methods approach [Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous grazing transmission small angle x-ray scattering and electrochemical methods approach]

Nanoparticle electrodeposition is a simple and scalable approach to synthesizing supported nanoparticles. Used with a deep eutectic solvent (DES), surface nanoparticles can be assembled and exhibit unique surface charge separation when the DES is adsorbed on the nanoparticle surface. Key to understanding and controlling the assembly and the capacitance is a thorough understanding of surface particle mobility and charge screening, which requires an in-situ approach. In this study, Pb particle formation, size, shape and capacitance are resolved in a 1:2 choline Cl – : urea deep eutectic solvent whilst sweeping the cell potential in the range: 0.2 V to –1.2 V (vs. Ag/AgCl). These system parameters were resolved using a complementary suite of sample-rotated small angle X-ray scattering (SR-SAXS) and electrochemical impedance spectroscopy (EIS), which are presented and discussed in detail. This approach is able to show that both particle and ion transport are impeded in the DES, as aggregation occurs over the course of 6 minutes, and dissolved Pb ions accumulate and remain near the surface after a nucleation pulse is applied. The DES-Pb interactions strongly depend on the cell potential as evidenced by the specific differential capacitance of the Pb deposit, which has a maximum value of 2.5 +/– 0.5 F g –1 at –1.0 V vs. Ag/AgCl. Together, the SR-SAXS-EIS approach is able to characterize the unique nanoparticle capacitance, mobility and ion mobility in a DES and can be used to study a wide range of nanoparticle deposition systems in-situ .

36 MATERIALS SCIENCE↗

Support-induced morphology and content tailored NiCo 2 O 4 nanostructures on temperature-dependent carbon nanofibers with enhanced pseudocapacitive performance

Direct anchorage of metal oxides on carbon nanofibers is challenging, and simultaneous modulation of morphology, content and thus pseudocapacitance of anchored metal oxides has never been achieved. In this paper, we report direct anchorage of NiCo 2 O 4 nanostructures with tailored morphology, content and pseudocapacitance, on temperature-dependent carbon nanofibers (CNEs), which are derived from zinctrimesic acid fibers at a temperature no more than 600 degrees C. The temperature-dependent CNEs, including CNF-390, CNF-450 and CNF-600, were first investigated by SEM, TG, FT-IR, XPS and Boehm titration studies. It is found that their textural property, thermal stability and surface functionality vary depending on pyrolysis temperature. As a result, the morphology, content and thus the pseudocapacitance of anchored NiCo 2 O 4 nanostructures are also temperature-dependent. It is revealed that as increasing the pyrolysis temperature, the shape of NiCo 2 O 4 is transformed from embedded nanoparticles to exposed nanosheets while its content decreases from 95 to 55 wt%. The resultant NiCo 2 O 4 /CNF-450, bearing highly dispersed nanosheets and optimized NiCo 2 O 4 content (72.6%), exhibits the best capacitive performance with a large specific capacitance of 870 F g -1 at a scan rate of 1 mV s -1 , and a high energy density of 39.3 Wh kg -1 in the case of power density of 300 W kg -1 . The elaborately fabricated NiCo 2 O 4 /CNF-450 also shows excellent charge-discharge stability (with the capacity retention ratio of 85.7% after 5000 cycles). The improved accessibility for more pseudocapacitive NiCo 2 O 4 nanosheets, as well as the strong interaction between NiCo2O4 and carbon nanofiber, should be responsible for the enhanced capacitive performance of NiCo 2 O 4 /CNF-450. Lastly, this research also provides the concept of support-induced modulation of property and pseudocapacitive performance of anchored metal oxides.

36 MATERIALS SCIENCE↗

Synergetic effects of mixed copper–iron oxides oxygen carriers in chemical looping combustion

Chemical looping combustion (CLC) is an emerging technology for clean energy production from fuels. CLC produces sequestration-ready CO{sub 2}-streams without a significant energy penalty. Development of efficient oxygen carriers is essential to successfully operate a CLC system. Copper and iron oxides are promising candidates for CLC. Copper oxide possesses high reactivity but it has issues with particle agglomeration due to its low melting point. Even though iron oxide is an inexpensive oxygen carrier it has a slower reactivity. In this study, mixed metal oxide carriers containing iron and copper oxides were evaluated for coal and methane CLC. The components of CuO and Fe{sub 2}O{sub 3} were optimized to obtain good reactivity while maintaining physical and chemical stability during cyclic reactions for methane-CLC and solid-fuel CLC. Compared with single metal oxygen carriers, the optimized Cu–Fe mixed oxide oxygen carriers demonstrated high reaction rate, better combustion conversion, greater oxygen usage and improved physical stability. Thermodynamic calculations, XRD, TGA, flow reactor studies and TPR experiments suggested that there is a strong interaction between CuO and Fe{sub 2}O{sub 3} contributing to a synergistic effect during CLC reactions. The amount of oxygen release of the mixed oxide carrier in the absence of a fuel was similar to that of the single metal oxides. However, in the presence of fuels, the oxygen consumption and the reaction profiles of the mixed oxide carriers were significantly better than that of the single metal oxides. The nature of the fuel not only influenced the reactivity, but also the final reduction status of the oxygen carriers during chemical looping combustion. Cu oxide of the mixed oxide was fully reduced metallic copper with both coal and methane. Fe oxide of the mixed oxide was fully reduced Fe metal with methane but it was reduced to only FeO with coal. Possible mechanisms of how the presence of CuO enhances the reduction of Fe{sub 2}O{sub 3} are discussed.

01 COAL, LIGNITE, AND PEAT↗

Mechanisms and kinetics of citrate-promoted dissolution of a uranyl phosphate mineral

The formation of uranyl phosphate precipitates is a remediation strategy to limit the mobility of uranium in contaminated soils. However, exposure to organic ligands, like the plant exudate citrate, can remobilize the uranium. The purpose of this study is to provide a more thorough comprehension of citrate-promoted dissolution of a uranyl phosphate mineral, chernikovite [(H 3 O)(UO 2 )(PO 4 )·3H 2 O], by determining the extent of uranium release from chernikovite at a wide range of citrate concentrations. Here we have quantified the kinetics of dissolution and proposed potential mechanisms of chernikovite dissolution to gain a better understanding of the fate of uranyl phosphate precipitates in the environment. Batch dissolution and continuously stirred tank reactor (CSTR) experiments indicate that increasing citrate concentrations from 0.1 mM to 50 mM increases the concentration of dissolved uranium. However, at citrate concentrations of 10 mM and greater, the effectiveness of the ligand to enhance the dissolution decreases. Density functional theory modeling and Raman spectroscopy indicate a strong interaction between citrate and the uranyl ions at the surface of the uranyl phosphate. The interaction between citrate and uranyl suggests the formation of an alteration layer of uranyl-citrate surface complexes, which could impede uranium release at citrate concentrations of 10 mM or higher. Together, these results indicate that the citrate-promoted dissolution of chernikovite is a fast reaction that is hindered by a combination of surface saturation and a secondary-phase precipitation reaction at higher concentrations of citrate and reaction times greater than or equal to 72 min based on the hydraulic residence time of CSTR experiments. These findings improve our understanding of the stability of uranyl phosphate for use in sequestration of uranium groundwater plumes at contaminated sites.

58 GEOSCIENCES↗

Mn(II)-induced phase transformation of Mn(IV) oxide in seawater

Manganese (Mn) oxides are key components of oceanic and lacustrine Mn nodules and influence metal cycling through oxidation and adsorption processes. Layered Mn oxides (LMOs) are the most common minerals in these nodules and the immediate products of microbially mediated Mn(II) oxidation by O 2 . LMOs can transform into tunneled Mn oxides (TMOs), Mn oxyhydroxides (MnOOH), or Mn(II,III) phase (Mn 3 O 4 ). LMOs often concur with Mn(II) in the environment and the adsorption and oxidation of Mn(II) by LMOs can greatly promote the transformation of LMOs to those phases. However, the Mn(II)-promoted transformation of LMOs in seawater—rich in various cations (300 mM Na + , 10 mM K + , 50 mM Ca 2+ , and 10 mM Mg 2+ ) remains poorly understood. We examined the transformation of δ-MnO 2 in artificial seawater (pH 8.2) under anoxic conditions with the Mn(II)/MnO 2 ratio (r) ranging from 0.08 to 3.83. To assess the effect of ionic strength (IS), parallel experiments were conducted in a mixed 530 mM NaCl and 10 mM KCl solution (having seawater ionic strength but without Ca 2+ and Mg 2+ ) and in 100 mM NaCl solution as a control. At low r (0.08), δ-MnO 2 transformed into triclinic birnessite and a 4 × 4 TMO in 100 mM NaCl solution, which, however, was suppressed in seawater due to strong interactions of Ca 2+ /Mg 2+ with δ-MnO 2 . In the mixed 530 mM NaCl and 10 mM KCl solution (the same ionic strength as of seawater), the transformation occurred extensively but the products had lower crystallinity compared to in 100 mM NaCl solution. At the high Mn(II)/MnO 2 ratios (0.5 ≤ r ≤ 3.83), δ-MnO 2 transformed extensively into MnOOH phases and hausmannite (Mn 3 O 4 ) in 100 mM NaCl solution. The seawater suppressed the transformation, but the suppression became weaker with increasing Mn(II)/MnO 2 ratio. For example, the transformation was completely suppressed at r = 0.5 but essentially negligible at r = 3.83. The suppression at these high Mn(II)/MnO 2 ratios was mainly ascribed to the influence of Ca 2+ and Mg 2+ rather than of the high IS, and the weaker suppression at the higher Mn(II)/MnO 2 ratio suggests stronger competition of Mn(II) with Ca 2+ /Mg 2+ for interacting with δ-MnO 2 . Moreover, the composition and crystallinity of the transformation products (i.e., the relative abundance of MnOOH (α, β, and γ) and Mn 3 O 4 ) were influenced by both the high ionic strength and the presence of Ca 2+ and Mg 2+ . Therefore, even though Ca 2+ and Mg 2+ concentrations are much lower than Na + in seawater, their impacts on the transformation are dominant. Our study explains why MnOOH phases, hausmannite, and TMOs are less common than LMOs in oceanic environments, partially because seawater chemistry suppresses their formation. LMOs are the most reactive for metal adsorption and oxidation among all Mn oxides. Thus, the high stability of LMOs in an oceanic environment confers the high impacts of Mn oxides on metal cycling in the ocean.

Divalent manganese↗

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

High purity single crystal titanium (Ti) under shock wave loading is modeled under both one-dimensional and three-dimensional cylindrical conditions. Cylinder sizes of 10 μm and 20 μm radius are both considered in order to assess influence of boundary conditions. A thermodynamically consistent single crystal model for application to shock conditions is presented. The model accounts for the coupled non-linear elastic, dislocation slip, deformation twinning, and structural phase transformation response of the titanium material. Plate impact experiment results using a copper flyer are used to compare against the simulations for crystals oriented in [0001] and [10$\overline1$1] crystallographic directions. The one-dimensional and threedimensional simulations of the two differently oriented single crystals indicate differences between the one-dimensional and three-dimensional representation, especially for the [10$\overline1$1] oriented single crystal. This orientation breaks the relative orientation symmetry between the crystal and cylinder which otherwise exists for the [0001] oriented single crystal. A significant amount of heterogeneity in the field response of the[10$\overline1$1] oriented simulation was demonstrated due to the highly coupled nature of the deformation. A bi-crystal model composed of both the [0001] and [10$\overline1$1] orientations with the boundary between the two along the axis of the cylinder is also considered for a cylinder model size of 10 μm. The results indicate a strong interaction between the two grains that affects the ω phase volume fraction achieved relative to the single crystal calculations.

36 MATERIALS SCIENCE↗

Parametric Studies of Heat Pump Water Heater Using Low GWP Refrigerants

A storage heat pump water heater (HPWH) comprises a vapor compression system and a hot water tank. It can lead to more than 70% energy saving, compared with electric resistance heating. HPWH usually uses a wrapped-tank coil as the water heater. The wrapped coil has a strong interaction with the water tank and impose a new challenge for the engineering design and simulation study. Based on the US DOE/ORNL Heat Pump Design Model (HPDM), i.e., a public-domain, component-based thermal system modelling platform, a segment-to-segment wrapped-tank coil model coupled with a one-dimensional stratified water tank model were developed, which facilitates modeling and design HPWHs having various configurations and components. Additionally, the hardware-based design model was used to evaluate refrigerants having lower global warming potentials to replace R-134a, including R-1234yf, R-1234ze, R-290, R-513A and R-450A, when effects of compressor size, refrigerant charge on 24-hour uniform energy factor (UEF) and first-hour rating (FHR) were investigated.In the drop-in replacements, R-1234ze achieved the best UEF, and R-290 resulted in the lowest UEF. When downsizing the compressor to maximize the UEFs, the UEFs of R-134a, R-290, R1234yf, R-450A and R-513A ascended to the range of 4.4 to 4.53, with R-513A having the highest UEF. The R-1234ze ended up having the lowest UEF of 4.27. Refrigerants having larger volumetric vaporization heat led to higher FHRs if using the fixed-size compressor, that R-290 resulted in the highest FHR.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Methane oxidation on Pd–Ceria: A DFT study of the mechanism over PdxCe1-xO2, Pd, and PdO

Palladium/ceria exhibits unique catalytic activity for hydrocarbon oxidation; however, the chemical and structural properties of active sites on the palladium–ceria surface are difficult to characterize. Strong interactions between palladium and the ceria support stabilize oxidized Pdδ+ species, which may contribute to the significant activity of Pd/ceria for methane oxidation. We present a density functional theory (DFT + U) investigation into methane oxidation over Pd/ceria and quantify the activity of the Pd x Ce 1-x O 2 (1 1 1) mixed oxide surface in comparison with the PdO(1 0 0) and Pd(1 1 1) surfaces. The methane activation barrier is lowest over the Pd x Ce 1-x O 2 (1 1 1) surface, even lower than over the Pd(1 1 1) surface or low coordinated stepped or kinked Pd sites. Subsequent reaction steps in complete oxidation, including product desorption and vacancy refilling, are considered to substantiate that methane activation remains the rate-limiting step despite the low barrier over Pd x Ce 1-x O 2 (1 1 1). The low barrier over the Pd x Ce 1-x O 2 (1 1 1) surface demonstrates that mixed ceria-noble metal oxides offer the potential for improved hydrocarbon oxidation performance with respect to dispersed noble metal particles on ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of solvent for individual steps of phenol hydrodeoxygenation with Pd/C and HZSM-5 as catalysts

Impacts of water, methanol, and hexadecane solvents on the individual steps of phenol hydrodeoxygenation are investigated over Pd/C and HZSM-5 catalyst components at 473 Kin presence of H-2. Hydrodeoxygenation of phenol to cyclohexane includes four individual steps of phenol hydrogenation to cyclohexanone on Pd/C, cyclohexanone hydrogenation to cyclohexanol on Pd/C, cyclohexanol dehydration to cyclohexene on HZSM-5, and cyclohexene hydrogenation to cyclohexane on Pd/C. Individual phenol and cyclohexanone hydrogenation rates are much lower in methanol and hexadecane than in water, while rates of cyclohexanol dehydration and cyclohexene hydrogenation are similar in three solvents. The slow rate in methanol is due to the strong solvation of reactants and the adsorption of methanol on Pd, as well as to the reaction between methanol and the cyclohexanone intermediate. The low solubility of phenol and strong interaction of hexadecane with Pd lead to the slow rate in hexadecane. The apparent activation energies for hydrogenation follow the order E-a phenol > E-a cyclonexanone > E-a cyclohexene, and the sequences of individual reaction rates are reverse in three solvents. The dehydration rates (1.1-1.8 x 10(3) mol mol(BAS)(-1) h(-1))and apparent activation energies (115-124 kJ mol(-1)) are comparable in three solvents. In situ liquid-phase IR spectroscopy shows the rates consistent with kinetics derived from chromatographic evidence in the aqueous phase and verifies that hydrogenation of phenol and cyclohexanone follows reaction orders of 1.0 and 0.55 over Pd/C, respectively. Conversion of cyclohexanol with HZSM-5 shows first-order dependence in approaching the dehydration-hydration equilibrium in the aqueous phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of Diesters on Copper Catalyst Anchored on Ordered Hierarchical Porous Silica: Pore size effect

An ordered hierarchically porous silica (HPS) with the coexistence of both mesopores and abundant micropores was fabricated and used as support for the preparation of copper-based catalysts (Cu/HPS). The ordered mesoporous structure of the Cu/HPS catalysts was retained. In addition, both Cu0 and Cu+ species are found to be highly dispersed. It might be attributed to the anchoring effect of micropores and the formation of Cu-O-Si species derived from the strong interaction between surface silica and copper precursor. The Cu/HPS catalysts showed excellent performances in the hydrogenation of dimethyl adipate. The catalytic activity in dimethyl oxalate hydrogenation depended on the surface reaction, while the activity in dimethyl adipate hydrogenation will be readily controlled by pore diffusion, which can be improved by tailoring the pore size of HPS. These findings could be meaningful instruction for the rational design of industrial catalysts for the hydrogenation of various diesters.

ester, hydrogenation, higherarchical, copper, diff↗

Transition metal carbides and nitrides as catalysts for thermochemical reactions

Transition metal carbides and nitrides (TMCs and TMNs) have attracted much attention due to their unique physical and chemical properties brought by the incorporation of interstitial carbon and nitrogen into the crystal lattice of the parent metals. Recent advances in utilizing TMCs and TMNs have revealed their intriguing catalytic properties in many industrially important reactions, including heteroatom removal, CO 2 activation, alcohol reforming, and water–gas shift reactions. The promising activity, selectivity, and stability of TMCs and TMNs, either as catalysts or as supports for other metals, are often attributed to their strong interactions with the adsorbates, tunable surface properties, as well as the synergy with supported metals. This review summarizes the synthesis and characterization of TMC and TMN model surfaces and powder catalysts, and uses several case studies to demonstrate their unique catalytic properties in these important reactions. Finally, a discussion is also provided regarding the challenges and opportunities associated with the utilization of TMCs and TMNs in thermocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗