Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

High temperature, low mass solar blanket development

This paper presents methods of incorporating ultrathin silicon solar cells into photovoltaic blankets for space applications. This type of cell has the highest power-to-mass ratio and best performance under space radiation of any silicon solar cell. Interconnect materials and designs, and the results of the investigation of the applicability of parallel-gap resistance welding for interconnecting ultrathin cells are discussed. Data relating contact pull strength and cell electrical degradation to welding parameters such as time, voltage, and pressure are presented. Methods for bonding ultrathin cells to flexible substrates and for bonding thin covers to these cells are described, and the results of vacuum thermal cycling and thermal soak tests on prototype ultrathin cell test coupons are included.

Mesch, H. G.↗
NASA NTRS1980

Ion heating by strong electrostatic ion cyclotron turbulence

A theory of the ion heating due to electrostatic ion cyclotron (EIC) waves in the auroral zone is presented. Due to the slowly convecting nature of the EIC mode, quasi-linear plateau formation cannot stabilize the waves, and growth occurs until the nonlinear mechanisms of ion resonance broadening and electron trapping provide saturation. The large amplitude and coherent nature of the resulting wave imply that quasi-linear theory provides only a lower limit to the ion heating. An upper bound on the heating rate is derived using a time-average model of ion dynamics in the coherent waves. The effects of ion heating in the presence of the magnetic gradient force and parallel electric fields are considered, with the result that perpendicular energies over 100 eV are easily attainable from a 1 eV source plasma. Perpendicular heating in the absence of a parallel electric field yields conical ion distributions, which in the presence of an electric field become field-aligned beams.

Lysak, R. L.↗
NASA NTRS1981

Theory of the auroral magnetosphere

The aurora has come to be understood as a manifestation of energy transfer and plasma transfer from the solar wind to the magnetosphere. The auroral oval seems to be a mapping of the boundary layer that lies just inside the magnetospheric surface, which consists of the magnetopause and neutral sheet. The auroral oval is consequently a region of reversal for the meridional (r,8) component of the magnetospheric convection electric field and thus a region of strong shear in the plasma drift velocity field. The velocity shear seems to account for the formation of eddies in the auroral "curtain". Moreover, the Kinematical impedance associated with hot auroral plasma perpendicular electric field across a narrow region of latitude to occur without the formation of a large parallel electric field. The signature of the parallel electric field is such as to produce upgoing ion beams and precipitating electron beams in the PM (afternoon-evening) sector of local time, and to account for the polarity of Region-1 currents as a function of local time.

Schulz, M.↗
NASA NTRS1984

Ultrareliable fault-tolerant control systems

It is demonstrated that fault-tolerant computer systems, such as on the Shuttles, based on redundant, independent operation are a viable alternative in fault tolerant system designs. The ultrareliable fault-tolerant control system (UFTCS) was developed and tested in laboratory simulations of an UH-1H helicopter. UFTCS includes asymptotically stable independent control elements in a parallel, cross-linked system environment. Static redundancy provides the fault tolerance. A polling is performed among the computers, with results allowing for time-delay channel variations with tight bounds. When compared with the laboratory and actual flight data for the helicopter, the probability of a fault was, for the first 10 hr of flight given a quintuple computer redundancy, found to be 1 in 290 billion. Two weeks of untended Space Station operations would experience a fault probability of 1 in 24 million. Techniques for avoiding channel divergence problems are identified.

Webster, L. D.↗
NASA NTRS1987

A VLSI Processor Engine to Support Calculation of the Vector Wave Equation

The development of a VLSI processor engine tailored to support computation of the near-field vector wave equation (VWE) is presented. Calculation of the near field is essential for evaluation of the electromagnetic fields generated by a complex radiating structure. The processor engine presented is optimized such that it takes advantage of the extensive parallelism inherent in the computational algorithm. The utilization of very large scale integration (VLSI) circuit technology and a customized reduced instruction set computer (RISC) architecture support development of a system of these processor engines, each of which is capable of performing the VWE algorithm calculation. By taking maximum advantage of the parallelism present in the calculation and dividing the problem among an array of these processor engines, the calculation can be computed in a realistic time frame.

J W Degroat↗
NASA NTRS1994

A mechanism to produce a dawn-dusk component of plasma flow during magnetic reconnection in the magnetotail

Magnetic reconnection between antiparallel field lines in the magnetotail is generally thought to produce plasma acceleration in the earthward-tailward direction. However, measurements of the plasma velocity in the magnetotail during substorm activity sometimes reveal a dawn-dusk component of plasma flow. In this paper, we show that a dawn-dusk component of plasma acceleration may be produced during reconnection if the neutral line is not perpendicular to the magnetic field. In this case, Magnetohydrodynamic (MHD) simulations show that reconnection between antiparallel field lines will initially produce plasma acceleration that is nearly parallel to the neutral line because the magnetic tension force is not opposed by a pressure gradient force in this direction. As the magnetic field topology evolves to a steady state, the plasma flow direction rotates until it is nearly parallel to the plane that initially contained the antiparallel magnetic field lines before reconnection (hereafter referred to as the initial field plane). However, the time required to reach a steady state (typically several hundred seconds in the magnetotail region) may be greater than the time during which the reconnection process is active. Consequently, bursts of plasma flow with a dawn-dusk component may occur in the magnetotail. The initial acceleration along the neutral line depends on the angle theta (sub B) between the neutral line and the initial field plane, with the largest burst of plasma flow along the neutral line occuring when theta (s ub B) = 45 degs.

Hawkins, J. G.↗
NASA NTRS2000

Supercomputing Aspects for Simulating Incompressible Flow

The primary objective of this research is to support the design of liquid rocket systems for the Advanced Space Transportation System. Since the space launch systems in the near future are likely to rely on liquid rocket engines, increasing the efficiency and reliability of the engine components is an important task. One of the major problems in the liquid rocket engine is to understand fluid dynamics of fuel and oxidizer flows from the fuel tank to plume. Understanding the flow through the entire turbo-pump geometry through numerical simulation will be of significant value toward design. One of the milestones of this effort is to develop, apply and demonstrate the capability and accuracy of 3D CFD methods as efficient design analysis tools on high performance computer platforms. The development of the Message Passage Interface (MPI) and Multi Level Parallel (MLP) versions of the INS3D code is currently underway. The serial version of INS3D code is a multidimensional incompressible Navier-Stokes solver based on overset grid technology, INS3D-MPI is based on the explicit massage-passing interface across processors and is primarily suited for distributed memory systems. INS3D-MLP is based on multi-level parallel method and is suitable for distributed-shared memory systems. For the entire turbo-pump simulations, moving boundary capability and efficient time-accurate integration methods are built in the flow solver, To handle the geometric complexity and moving boundary problems, an overset grid scheme is incorporated with the solver so that new connectivity data will be obtained at each time step. The Chimera overlapped grid scheme allows subdomains move relative to each other, and provides a great flexibility when the boundary movement creates large displacements. Two numerical procedures, one based on artificial compressibility method and the other pressure projection method, are outlined for obtaining time-accurate solutions of the incompressible Navier-Stokes equations. The performance of the two methods is compared by obtaining unsteady solutions for the evolution of twin vortices behind a flat plate. Calculated results are compared with experimental and other numerical results. For an unsteady flow, which requires small physical time step, the pressure projection method was found to be computationally efficient since it does not require any subiteration procedure. It was observed that the artificial compressibility method requires a fast convergence scheme at each physical time step in order to satisfy the incompressibility condition. This was obtained by using a GMRES-ILU(0) solver in present computations. When a line-relaxation scheme was used, the time accuracy was degraded and time-accurate computations became very expensive.

Kwak, Dochan↗
NASA NTRS1997

Communication Improvement for the LU NAS Parallel Benchmark: A Model for Efficient Parallel Relaxation Schemes

The first release of the MPI version of the LU NAS Parallel Benchmark (NPB2.0) performed poorly compared to its companion NPB2.0 codes. The later LU release (NPB2.1 & 2.2) runs up to two and a half times faster, thanks to a revised point access scheme and related communications scheme. The new scheme sends substantially fewer messages. is cache "friendly", and has a better load balance. We detail the, observations and modifications that resulted in this efficiency improvement, and show that the poor behavior of the original code resulted from deriving a message passing scheme from an algorithm originally devised for a vector architecture.

Yarrow, Maurice↗
NASA NTRS2010

Gas Flow Detection System

This system provides a portable means to detect gas flow through a thin-walled tube without breaking into the tubing system. The flow detection system was specifically designed to detect flow through two parallel branches of a manifold with only one inlet and outlet, and is a means for verifying a space shuttle program requirement that saves time and reduces the risk of flight hardware damage compared to the current means of requirement verification. The prototype Purge Vent and Drain Window Cavity Conditioning System (PVD WCCS) Flow Detection System consists of a heater and a temperature-sensing thermistor attached to a piece of Velcro to be attached to each branch of a WCCS manifold for the duration of the requirement verification test. The heaters and thermistors are connected to a shielded cable and then to an electronics enclosure, which contains the power supplies, relays, and circuit board to provide power, signal conditioning, and control. The electronics enclosure is then connected to a commercial data acquisition box to provide analog to digital conversion as well as digital control. This data acquisition box is then connected to a commercial laptop running a custom application created using National Instruments LabVIEW. The operation of the PVD WCCS Flow Detection System consists of first attaching a heater/thermistor assembly to each of the two branches of one manifold while there is no flow through the manifold. Next, the software application running on the laptop is used to turn on the heaters and to monitor the manifold branch temperatures. When the system has reached thermal equilibrium, the software application s graphical user interface (GUI) will indicate that the branch temperatures are stable. The operator can then physically open the flow control valve to initiate the test flow of gaseous nitrogen (GN2) through the manifold. Next, the software user interface will be monitored for stable temperature indications when the system is again at thermal equilibrium with the test flow of GN2. The temperature drop of each branch from its "no flow" stable temperature peak to its stable "with flow" temperature will allow the operator to determine whether a minimum level of flow exists. An alternative operation has the operator turning on the software only long enough to record the ambient temperature of the tubing before turning on the heaters and initiating GN2 flow. The stable temperature of the heated tubing with GN2 flow is then compared with the ambient tubing temperature to determine if flow is present in each branch. To help quantify the level of flow in the manifolds, each branch will be bench calibrated to establish its thermal properties using the flow detection system and different flow rates. These calibration values can then be incorporated into the software application to provide more detailed flow rate information.

Moss, Thomas↗
NASA NTRS2016

High Energy, Narrow Linewidth 1572nm Eryb-Fiber Based MOPA for a Multi-Aperture CO2 Trace-Gas Laser Space Transmitter

Accurate global measurements of tropospheric CO2 mixing ratios are needed to study CO2 emissions and CO2 exchange with the land and oceans. NASA Goddard Space Flight Center (GSFC) is developing a pulsed lidar approach for an integrated path differential absorption (IPDA) lidar to allow global measurements of atmospheric CO2 column densities from space. Our group has developed, and successfully flown, an airborne pulsed lidar instrument that uses two tunable pulsed laser transmitters allowing simultaneous measurement of a single CO2 absorption line in the 1570 nm band, absorption of an O2 line pair in the oxygen A-band (765 nm), range, and atmospheric backscatter profiles in the same path. Both lasers are pulsed at 10 kHz, and the two absorption line regions are sampled at typically a 300 Hz rate. A space-based version of this lidar must have a much larger lidar power-area product due to the x40 longer range and faster along track velocity compared to airborne instrument. Initial link budget analysis indicated that for a 400 km orbit, a 1.5 m diameter telescope and a 10 second integration time, a 2 mJ laser energy is required to attain the precision needed for each measurement. To meet this energy requirement, we have pursued parallel power scaling efforts to enable space-based lidar measurement of CO2 concentrations. These included a multiple aperture approach consists of multi-element large mode area fiber amplifiers and a single-aperture approach consists of a multi-pass Er:Yb:Phosphate glass based planar waveguide amplifier (PWA). In this paper we will present our laser amplifier design approaches and preliminary results.

micropulse lidar↗
NASA NTRS2017

Lower Hybrid Frequency Range Waves Generated by Ion Polarization Drift Due to Electromagnetic Ion Cyclotron Waves: Analysis of an Event Observed by the Van Allen Probe B

We analyze a wave event that occurred near noon between 07:03 and 07:08 UT on 23 February 2014 detected by the Van Allen Probes B spacecraft, where waves in the lower hybrid frequency range (LHFR) and electromagnetic ion cyclotron (EMIC) waves are observed to be highly correlated, with Pearson correlation coefficient of approximately 0.86. We assume that the correlation is the result of LHFR wave generation by the ions polarization drift in the electric field of the EMIC waves. To check this assumption the drift velocities of electrons and H+, He+, and O+ ions in the measured EMIC wave electric field were modeled. Then the LHFR wave linear instantaneous growth rates for plasma with these changing drift velocities and different plasma compositions were calculated. The time distribution of these growth rates, their frequency distribution, and the frequency dependence of the ratio of the LHFR wave power spectral density (PSD)parallel and perpendicular to the ambient magnetic eld to the total PSD were found. These characteristics of the growth rates were compared with the corresponding characteristics of the observed LHFR activity. Reasonable agreement between these features and the strong correlation between EMIC and LHFR energy densities support the assumption that the LHFR wave generation can be caused by the ions polarization drift in the electric field of an EMIC wave.

Van Allen Probes↗
NASA NTRS1994

Shock interactions with magnetized interstellar clouds. 1: Steady shocks hitting nonradiative clouds

We study the interaction of a steady, planar shock with a nonradiative, spherical, interstellar cloud threaded by a uniform magnetic field. For strong shocks, the sonic Mach number scales out, so two parameters determine the evolution: the ratio of cloud to intercloud density, and the Alfven Mach number. We focus on the case with initial field parallel to the shock velocity, though we also present one model with field perpendicular to the velocity. Even with 100 zones per cloud radius, we find that the magnetic field structure converges only at early times. However, we can draw three conclusions from our work. First, our results suggest that the inclusion of a field in equipartition with the preshock medium can prevent the complete destruction of the cloud found in the field-free case recently considered by Klein, McKee, & Colella. Second, the interaction of the shock with the cloud can amplify the magnetic field in some regions up to equipartition with the post-shock thermal pressure. In the parallel-field case, the shock preferentially amplifies the parallel component of the field, creating a 'flux rope,' a linear structure of concentrated magnetic field. The flux rope dominates the volume of amplified field, so that laminar, rather than turbulent, amplification is dominant in this case. Third, the presence of the cloud enhances the production of X-ray and synchrotron emission. The X-ray emission peaks early, during the initial passage of the shock over the cloud, while the synchrotron emission peaks later, when the flow sweeps magnetic field onto the axis between the cloud and the main shock.

Low, Mordecai-Mark Mac↗
NASA NTRS2013

The Simplified Aircraft-Based Paired Approach With the ALAS Alerting Algorithm

This paper presents the results of an investigation of a proposed concept for closely spaced parallel runways called the Simplified Aircraft-based Paired Approach (SAPA). This procedure depends upon a new alerting algorithm called the Adjacent Landing Alerting System (ALAS). This study used both low fidelity and high fidelity simulations to validate the SAPA procedure and test the performance of the new alerting algorithm. The low fidelity simulation enabled a determination of minimum approach distance for the worst case over millions of scenarios. The high fidelity simulation enabled an accurate determination of timings and minimum approach distance in the presence of realistic trajectories, communication latencies, and total system error for 108 test cases. The SAPA procedure and the ALAS alerting algorithm were applied to the 750-ft parallel spacing (e.g., SFO 28L/28R) approach problem. With the SAPA procedure as defined in this paper, this study concludes that a 750-ft application does not appear to be feasible, but preliminary results for 1000-ft parallel runways look promising.

Perry, Raleigh B.↗
NASA NTRSDate not supplied

The Additive Manufacturing Moment Measure - A Parallel Computation Technique for Determining Build Variance in the Laser Powder Bed Fusion Process

Additive manufacturing (AM) has unique process attributes that facilitate the creation of optimized, complex, and unique parts for aerospace applications. However, the multi-scale and complicated building process for AM parts can cause unexpected build conditions that result in microstructural variability within the deposited material. The need for richer datasets and computational modeling capabilities to improve AM process reliability is a consequence of this microstructural variability. A computational approach, referred to as the Additive Manufacturing Moment Measure (AM3), addresses this need by leveraging the way AM processes fuse material in precise, incremental steps. During the layering sequence, each previous step contributes to the condition of the current step at the center of the heat source. The precise steps can be selected to systematically create a time-space point field with co-located machine input and in-situ sensor data. The sequential nature of the AM process, coupled with nearest neighbor calculations, allows for a fully parallel computation for part-scale build profile analysis. The AM3 concept introduced here enables part-scale assessment directly from build files and in-situ process monitoring sensors alike. The AM moment measures were calculated for build point fields and compared with co-located in-situ and ex-situ nondestructive evaluation and optical microscopy observations. These comparisons permit a better understanding of how the sequential process actions can affect the quality of a laser powder bed fusion (LPBF) build. Details of the AM3technique will be discussed and compared to measured LPBF part characteristics. The AM3 results indicate a strong potential to advance the qualification process for aerospace applications.

Additive Manufacturing↗
NASA NTRS1991

Development of iterative techniques for the solution of unsteady compressible viscous flows

Efficient iterative solution methods are being developed for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. Thus, the extra work required by iterative schemes can also be designed to perform efficiently on current and future generation scalable, missively parallel machines. An obvious candidate for iteratively solving the system of coupled nonlinear algebraic equations arising in CFD applications is the Newton method. Newton's method was implemented in existing finite difference and finite volume methods. Depending on the complexity of the problem, the number of Newton iterations needed per step to solve the discretized system of equations can, however, vary dramatically from a few to several hundred. Another popular approach based on the classical conjugate gradient method, known as the GMRES (Generalized Minimum Residual) algorithm is investigated. The GMRES algorithm was used in the past by a number of researchers for solving steady viscous and inviscid flow problems with considerable success. Here, the suitability of this algorithm is investigated for solving the system of nonlinear equations that arise in unsteady Navier-Stokes solvers at each time step. Unlike the Newton method which attempts to drive the error in the solution at each and every node down to zero, the GMRES algorithm only seeks to minimize the L2 norm of the error. In the GMRES algorithm the changes in the flow properties from one time step to the next are assumed to be the sum of a set of orthogonal vectors. By choosing the number of vectors to a reasonably small value N (between 5 and 20) the work required for advancing the solution from one time step to the next may be kept to (N+1) times that of a noniterative scheme. Many of the operations required by the GMRES algorithm such as matrix-vector multiplies, matrix additions and subtractions can all be vectorized and parallelized efficiently.

Sankar, Lakshmi N.↗
NASA NTRS2017

A PCR Based Microbial Monitoring Alternative Method of Detection and Identification of Microbes Aboard ISS

Previous research has shown that microorganisms and potential human pathogens have been detected on the International Space Station (ISS) with additional introduction of new microflora occurring with every exchange of crew or addition of equipment and supplies. These microbes are readily transferred between crew and subsystems (i.e. ECLSS, environmental control and life support systems). As this can be detrimental to astronaut health and optimal performance of ISS systems, monitoring of systems such as ECLSS to include identification of microbial contaminants could prevent adverse effects on human health and life support systems. Current monitoring on ISS is laborious and utilizes culture based methods followed by sample return to Earth for complete analysis. Future, long-distance spaceflight missions will require real-time monitoring capabilities that enable efficient and rapid assessments of the microbial environment allowing for expedited decisions and more targeted response to cope with anomalies. Polymerase chain reaction (PCR), a molecular microbial monitoring method was chosen and numerous PCR instruments investigated for their potential to perform in microgravity conditions. Using ISS as a test bed for PCR verification in microgravity will enable NASA to assess whether molecular based microbiological sensors may be components of reliable, closed-loop life support and habitation systems in spacecraft, enhancing infrastructure capabilities through increased efficiency, reliability, and time savings by enabling sample analysis on orbit. NASA selected the Water Monitoring Suite as one of the rapid spaceflight hardware demonstration activities utilizing a streamlined process to minimize the time required to fly experimental flight hardware. The RAZOR EX (BioFire Defense, Salt Lake City, UT) system was part of the water monitoring suite and is a commercial off-the-shelf (COTS) real-time PCR instrument designed for field work. The RAZOR EX was originally designed for Department of Defense (DoD) under a small business innovative research (SBIR) grant and is ruggedized, compact and provides a rapid, sample to answer in less than an hour. PCR assays using a fluorescent probe were optimized and spiked with known concentrations of DNA (Pseudomonas aeruginosa) ranging from 0.002 to 20 ng. PCR reagents were lyophilized and configured in customized pouches and tested for flight readiness. Three types of water were used to rehydrate the reagents and demonstrate the fidelity of the PCR reaction in microgravity. Molecular grade deionized water served as a control while filtered and unfiltered ISS potable water served to test for chemical or biological inhibitors. All three types were compared to parallel ground test results. Nine tests were run on ISS (3 of each water type) and the critical threshold cycle (Ct) was compared to parallel ground tests completed at Kennedy Space Center, FL and Johnson Space Center, TX. All concentrations of Pseudomonas aeruginosa DNA were detected. A comparison of the Ct produced in real time PCR indicated similarity between flight and ground samples. There appeared to be no significant difference between flight or ground PCR reactions or between any of the three water types. This testing demonstrated the ability to perform molecular testing during spaceflight operations with similar sensitivity. It will allow for future ground development of molecular protocols and minimize the need for spaceflight testing. Future testing will include development of additional targets including environmental and health related organisms.

Christina Khodadad↗
NASA NTRS1990

Intense ionospheric electric and magnetic field pulses generated by lightning

Electric and magnetic field measurements have been made in the ionosphere over an active thunderstorm and an optical detector onboard the same rocket yielded an excellent time base for the study of waves radiated into space from the discharge. In addition to detection of intense, but generally well understood whistler mode waves, very unusual electric and magnetic field pulses preceded the 1-10 kHz component of the radiated signal. These pulses lasted several ms and had a significant electric field component parallel to the magnetic field. No known propagating wave mode has this polarization nor a signal propagation velocity as high as those measured here. This study investigated and rejected an explanation based on an anomalous skin depth effect. Although only a hypothesis at this time, a more promising explanation involving the generation of the pulse via a nonlinear decay of whistler mode waves in the frequency range 10-80 kHz is being investigated.

Kelley, M. C.↗
NASA NTRS1993

Parallel processing methods for space based power systems

This report presents a method for doing load-flow analysis of a power system by using a decomposition approach. The power system for the Space Shuttle is used as a basis to build a model for the load-flow analysis. To test the decomposition method for doing load-flow analysis, simulations were performed on power systems of 16, 25, 34, 43, 52, 61, 70, and 79 nodes. Each of the power systems was divided into subsystems and simulated under steady-state conditions. The results from these tests have been found to be as accurate as tests performed using a standard serial simulator. The division of the power systems into different subsystems was done by assigning a processor to each area. There were 13 transputers available, therefore, up to 13 different subsystems could be simulated at the same time. This report has preliminary results for a load-flow analysis using a decomposition principal. The report shows that the decomposition algorithm for load-flow analysis is well suited for parallel processing and provides increases in the speed of execution.

Berry, F. C.↗