Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Comparative dielectric studies of nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12} and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} nano-composites synthesized by modified sol–gel and solid state methods

BaTiO{sub 3} (BTO), CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and 0.5BaTiO{sub 3}·0.5CaCu{sub 3}Ti{sub 4}O{sub 12} (BTO–CCTO), as a new nano-composite ceramic, were successfully designed and fabricated by a semi-wet gel route and a modified solid state method. The dielectric properties of the BTO–CCTO ceramic were compared to those of the BTO and CCTO ceramics at lower sintering temperatures and durations. The X-ray diffraction analysis revealed that the BTO and CCTO ceramics form a single crystalline phase and the average crystalline sizes calculated from X-ray diffraction data were in the range of 40–65 nm. The particle sizes of the BTO, CCTO, and BTO–CCTO ceramics obtained from transmission electron microscopy images were in the ranges of 40–65 nm, 80–110 nm, and 70–95 nm, respectively. The phase composition and microstructure were studied by X-ray diffraction and scanning electron microscopy. The energy dispersive X-ray results demonstrated the purity and stoichiometry of the BTO–CCTO nano-composite. The grain sizes of the BTO, CCTO and BTO–CCTO ceramics were found to be in the ranges of 500 nm–1 μm, 4–24 μm, and 250 nm–4 μm, respectively. The AC conductivity as a function of frequency confirmed the semiconducting nature of all of the ceramics and obeyed the Jonscher's power law. The impedance spectrum measurement result showed that the CCTO ceramic possessed an exceptional grain boundary resistance, which supports the internal barrier layer capacitance (IBLC) mechanism present in this ceramic and is responsible for the high ε{sub r} values. - Highlights: • Nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12}, and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} have been synthesized. • XRD and TEM analysis confirmed the formation of nanoparticles, 40–65 and 50–90 nm. • Impedance analysis shows high grain-boundary resistance present in CCTO ceramic. • AC conductivity as a function of frequency confirms the semiconducting nature.

36 MATERIALS SCIENCE↗

Ferroelectric, and piezoelectric properties of BaTi{sub 1−x}Al{sub x}O{sub 3}, 0 ≤ x ≤ 0.015

Single phase polycrystalline samples of BaTi{sub 1−x}Al{sub x}O{sub 3}, 0 ≤ x ≤ 0.015, have been prepared by a conventional powder processing method. The Rietveld refinements of X- ray powder diffraction patterns at room temperature indicate that the samples crystallize in tetragonal structure with group symmetry P4mm. Because of the oxygen vacancies, the volume of the unit cell increases with increasing x. Field emission scanning electron microscopy revealed that the particle size of pure BTO ceramics was affected by the Al content. Dielectric, ferroelectric and piezoelectric properties of pure BTO as well as Al-doped BTO were studied. It was found that the dielectric permittivity (ε′) increases significantly with increasing x while the transition from ferroelectric phase to a paraelectric phase changes slightly. The Curie-Weiss law is verified over a wide temperature range. Both ferroelectric and piezoelectric properties of BTO are enhanced by the substitution of Ti{sup 4+} by Al{sup 3+} ions. Piezoelectric strains of Al-doped BTO showed a suitable behavior for application compared with that of pure BTO compound. Finally, the results obtained in this work are discussed and compared with those for similar materials.

36 MATERIALS SCIENCE↗

Control blade degradation test under temperature gradient in steam atmosphere

The core of a boiling water reactor (BWR) consists of an array of fuel assemblies with cross-shaped control blades located between these assemblies. The typical control blade consists of a control blade sheath made of 316L-type S.S., a center pole made of 316L-type S.S., and control rods. In order to understand the degradation process of the control blade channel, control blade degradation tests were performed under various atmospheres with a temperature increase condition and in the presence of a temperature gradient. A test device was built. Four carbon heaters are set on both sides at the upper and the middle parts of the test device. The bottom ceramic part of the test device is cooled by water. Heating in the upper region and cooling at the bottom of the test piece give rise to the temperature gradient in the test piece. Temperatures of the test piece are measured by five W-Re type thermocouples placed close to the test piece. Steam carried by the argon gas is supplied from the bottom of the device and flows to the top inside a square carbon muffle in which the test piece is set. Three windows for visual observations are installed, with one located above the furnace and the others located at the back of the furnace. In the steam atmosphere with a steam flow rate of 0.0125 g/s/rod, the control blade, channel box, and fuel rods were degraded, especially at the upper part of the test piece. This result was similar to that observed in the argon atmosphere test. However, the observed degradation was rather different at a higher steam flow rate of 0.0417 g/s/rod. At the upper part of the test piece, only the control blade was degraded preferentially and did not react with the channel box wall. In contrast, the eutectic reaction of the stainless steel/boron carbide melt and zircaloy occurred at the lower part by coexisting with the relocated melt from the top part. These observations suggested the existence of a threshold condition for the control rod degradation between 0.0125 and 0.0417 g/s/rod which is significantly affected by the thickness of the oxide layer on zircaloy.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Synthesis and electrical properties of scheelite Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} solid electrolyte ceramics

Graphical abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte ceramics can be considered as one of the best candidates to replace the YSZ electrolyte materials for SOFCs because of their high oxide ion conduction. Research highlights: {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} solid electrolyte with a tetragonal scheelite structure. {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} electrolyte is one of the best candidates to replace the YSZ electrolyte for SOFCs because of their high oxide ion conduction. {yields} The sintering temperature is greatly lower than traditional YSZ electrolyte. -- Abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte powders were prepared by the sol-gel auto-combustion process. The crystal structure of the samples was determined by employing the techniques of X-ray diffraction (XRD). According to the XRD analysis, the formed continuous series of Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} (0 {<=} x {<=} 0.3) solid solutions had the structure of tetragonal scheelite, and the lattice parameters increased with increasing x in the Sm-substituted system. Results of sinterability and electrochemical testing revealed that the performances of Sm-doped calcium molybdate were superior to that of pure CaMoO{sub 4}. Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} ceramics show higher sinterability, and the Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sample with 98.7% of the theoretical density were obtained after being sintered at 1250 {sup o}C for 4 h. The conductivity increased with increasing samarium content, and a total conductivity 9.54 x 10{sup -3} S cm{sup -1} at 800 {sup o}C could be obtained in Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sintered at 1250 {sup o}C for 4 h.

36 MATERIALS SCIENCE↗

Fragmentation Prediction for a Brittle Ceramic: An Integrated Two-Scale Model Approach

A new implementation of a multi-scale fragmentation model is introduced that combines existing independent macro and micro-scale models into a single material model within the Library of Advanced Materials for Engineering (LAME) that can be used directly by the finite element structural mechanics code SIERRA/SM, developed at Sandia National Laboratories. The implementation not only joins existing independent fragmentation models into a single framework, but also enables further development by virtue of being integrated into SIERRA/SM. Integration with a finite element structural mechanics code for a true two-way coupling of the fragmentation models that were previously independent. Hereafter, the prior implementation will be referred to as the sequentially applied fragmentation model. In contrast, the newly developed model will be called the integrated two-scale model. The sequentially applied fragmentation model consists of two independent models applied sequentially to account for the macro-scale and microscale fragmentation. The macro-scale fragmentation behavior is calculated using an elastic gradient damage explicit material model developed to model fracture in brittle materials. The micro-scale fragmentation model is an implementation of the 1D cohesive-zone model developed by Zhou, et al. The micro-scale model is implemented by post-processing the macro-scale data that provides initial conditions for the 1D analysis. The micro-scale model is necessary to predict the resulting fragment size distribution at length scales inaccessible to the finite element based macro-scale model. The full range of fragmentation behavior is then predicted by combining the results from the two independent models. The sequentially applied fragmentation model was used to predict the fragments that result from impact loading of a brittle material, which in that case was a ceramic cylinder of commercial UO{sub 2} nuclear fuel. Understanding the fragmentation behavior of such materials is important for evaluating the risk of airborne particulate release under impact loading scenarios. This work will verify the implementation of the integrated two-scale model using the same experiment modeled by the existing sequentially applied model. The purpose of this manuscript is to introduce the new integrated two-scale fragmentation model and validate the implementation against the existing sequentially applied model for a specific case of impact loading of a brittle material. This validation case will not fully utilize the benefits of having the model integrated into the finite element code as a material model. Rather, this study will demonstrate consistency between the two fragmentation models to ensure that the success of the sequentially applied model will be duplicated by the integrated two-scale approach. Once validated, further development of the model can be made by utilizing the integration into the finite element code to create a fully two-way coupled fragmentation model that will be extended to include higher fidelity models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Scalable continuous flow synthesis of ZnO nanorod arrays in 3-D ceramic honeycomb substrates for low-temperature desulfurization

Scalable and cost-effective synthesis and assembly of technologically important nanostructures in three-dimensional (3D) substrates hold keys to bridge the demonstrated nanotechnologies in academia with industrially relevant scalable manufacturing. In this paper, using ZnO nanorod arrays as an example, a hydrothermal-based continuous flow synthesis (CFS) method is successfully used to integrate the nano-arrays in multi-channeled monolithic cordierite. Compared to the batch process, CFS enhances the average growth rate of nano-arrays by 125%, with the average length increasing from 2 μm to 4.5 μm within the same growth time of 4 hours. The precursor utilization efficiency of CFS is enhanced by 9 times compared to that of batch process by preserving the majority of precursors in recyclable solution. Computational fluid dynamic simulation suggests a steady-state solution flow and mass transport inside the channels of honeycomb substrates, giving rise to steady and consecutive growth of ZnO nano-arrays with an average length of 10 μm in 12 h. The monolithic ZnO nano-array-integrated cordierite obtained through CFS shows enhanced low-temperature (200 °C) desulfurization capacity and recyclability in comparison to ZnO powder wash-coated cordierite. This can be attributed to exposed ZnO {101¯0} planes, better dispersion and stronger interactions between sorbent and reactant in the ZnO nanorod arrays, as well as the sintering-resistance of nano-array configurations during sulfidation–regeneration cycles. Finally, with the demonstrated scalable synthesis and desulfurization performance of ZnO nano-arrays, a promising, industrially relevant integration strategy is provided to fabricate metal oxide nano-array-based monolithic devices for various environmental and energy applications.

36 MATERIALS SCIENCE↗

DIRECT LASER DEPOSITION OF POROUS STRUCTURES AND GRADIENT METAL-CERAMIC COMPOSITE COATINGS

Direct laser deposition is an additive manufacturing technique capable of producing complex geometries, bond different materials, repair broken parts, and add protective coating. In the present study it is used to make micro-porous scaffolds and apply protective vanadium and niobium carbide coatings. Micro-porous metal filters are a difficult thing to make but are required for many applications. In this study it was hypothesized that laser engineering net shaping (LENS) could be used to make porous Ti6Al4V scaffolds with an interconnected micro-porous structure. This proved to be true with cylinders made to have 15.9% porosity, and a pore size less than 100μm. These structures were made by only altering processing parameters, which yielded a scaffold with obstructed random pore interconnectivity. The scaffolds had a compressive strength of 645-556MPa and martensitic like α' grains. Another study was done to apply hard niobium and vanadium carbide surface coatings to stainless steel. The objective was to used LENS to deposit stainless steel coatings with added carbides to eventually make a gradient coating with increased protective qualities. Parts that have suffered material loss from abrasive wear or cavitation could have material added back as well as add a protective coating at the same time. Compositions ranging from 5% to 100% of the carbides were mixed with stainless steel. The coatings were then deposited on a stainless steel 304 substrate individually, as well as in a series to make a gradient structure. These coatings all increased hardness, wear resistance, and 100%VC significantly increased the materials resistance to damage from abrasive water. The carbides integrated into the SS304 matrix on the grain boundaries making a metal ceramic composite. These precipitates left residual stress in the structure which increased the hardness and wear resistance. The study proved that the addition of these carbides did increase the protective qualities and could make a gradient coating with properties tailored to the user’s preference.

13 HYDRO ENERGY↗

Enhanced flexibility and thermal conductivity of HfC decorated carbon nanofiber mats

Future-generation spacecraft components allude discovery of novel materials that can withstand extreme environments (>2000 °C). The combined effect of ultra-high temperature ceramics (UHTCs) and carbon fibers (C f ) can satisfy the demanding requirements of aerospace applications. A novel, hybrid, and flexible hafnium carbide (HfC)-decorated carbon nanofiber (C nf ) mat was fabricated via electrospinning. Enhanced thermal stability of the flexible HfC decorated C nf over C nf can be elucidated from the 20-fold increment in thermal conductivity and the onset of degradation at higher temperatures (840 °C). Successful integration of multi-layered sandwich lattice using in-housed fabricated HfC decorated C nf showed retention of the fibrous structure even after extreme spark plasma sintering (SPS) process at 1850 °C. Fabricating a similar multi-layered structure using procured C f was unsuccessful due to bundled agglomeration and micron-sized fibers. High-load indentation suggests that HfC decorated C nf interlayer is stronger (~2.3 times) than the parent UHTC with no cracking at the interface. Compared with the HfC matrix, the indentation-damaged area at the interface reduced up to ~56% due to toughening mechanisms such as C nf , fiber pull-out and bridging. The synthesized HfC decorated Cnf mat is proposed as an ultra-thin filler material for joining similar or dissimilar UHTCs while maintaining similar chemistry and better mechanical integrity at the interface. Furthermore, the findings insinuate a new paradigm in designing hybrid and flexible ceramic-containing materials for thermal protection systems (TPS) of future-generation spacecraft components that can mitigate failure in extreme environments (>2000 °C).

36 MATERIALS SCIENCE↗

Hierarchically MoS2 nanospheres assembled from nanosheets for superior CO gas-sensing properties

Highlights: • Preparation of 3D Hierarchical large surface area MoS{sub 2} nanospheres from nansheets. • The efficient enhanced gas-sensing response of 92.6 at 500 ppm for CO at 230 °C. • Higher selectivity towards CO than other gases at different temperature ranges. - Abstract: Hierarchical three dimensional MoS{sub 2}nanostructures composed of small sheet-like nanostructures are successfully prepared using a simple two-step hydrothermal process with sodium dodecyl sulfate (SDS), as a surface modifier. The as-preparedMoS{sub 2}nanospheres are characterized by XRD, BET, XPS, EDS, SEM and HRTEM. The gas–sensing properties of as–prepared MoS{sub 2}nanostructures are tested at 175–230 °C temperatures for 50–500 ppm concentration range, using an efficient ceramic-tube sensor system via an intelligent gas testing system. A high response and selectivity towards carbon monoxide than other gases is observed. Comparative studies of MoS{sub 2}nanostructures for different concentration of carbon monoxide gas and definite sensor-stability for different gases are studied, as well. The sensor fabrication and sensing mechanism is discussed as well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Aluminum Metal Powders for Plutonium-238 Program

As part of radioisotope thermoelectric generator (RTG) production for power sources in deep space exploration, Oak Ridge National Laboratory (ORNL) produces plutonium-238 ( 238 Pu). To produce 238 Pu, neptunium-237 ( 237 Np) targets are fabricated at ORNL and subsequently irradiated at the High Flux Isotope Reactor (HFIR) at ORNL and the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). Specifically, current flowsheets utilize neptunium dioxide ( 237 NpO 2 ) targets. Aluminum (Al) powder is blended with 237 NpO 2 target material to improve thermal conductivity during irradiation. The current composition of 237 NpO 2 /Al pellets (i.e., cermets, or ceramic–metallics) is 20% 237 NpO 2 , 70% Al, and 10% void space. Al powders utilized by the 238 Pu program are high-fired under vacuum before blending into targets. The primary objective of this work is to measure the physical, chemical, and thermal properties of Al before and after the high-firing process. Properties of interest include the morphology, surface texture, particle size, crystal phase(s), and thermal conductivity of the material. These properties are measured with existing materials characterization equipment at ORNL, including powder x-ray diffraction (pXRD), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), laser flash analysis (LFA), and thermogravimetric analysis (TGA). A secondary objective of this work is to compare the Al powders before and after the high-firing procedure to determine the effects of high-firing on chemical, physical, and thermal properties and to determine the efficacy of the high-firing process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ENHANCED SAFEGUARDS: THE ROLE OF SMART FUNCTIONAL COATINGS FOR TAMPER INDICATION

This work investigates the synthesis of smart functional coatings (SFC) using chemical solution deposition methods. Chemical solution deposition methods have recently received attention in the materials research community due to several unique advantages that include low temperature processing, high homogeneity of final products, the ability to fabricate materials with controlled surface properties and pore structures, and the ease of dopant incorporation in controlled concentrations. The optical properties of thin films were investigated using UV-Vis spectroscopy, Raman, SEM and EDS, with the aim of developing a protective transparent coating for a ceramic surface as a first line of defense for tamper indication. The signature produced by the addition of rare earth dopants will be employed as an additional tamper indicating feature. The integration of SFC's as part of a broader verification system such as an electronic seals can provide additional functionality and defense in depth. SFC's can improve the timeliness of detection by providing a robust, in-situ verifiable tamper indication framework.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Corrosion characteristics of monolithic SiC materials in beryllium-bearing molten fluoride salt

In this work, chemical vapor deposited SiC single crystal and polycrystals were exposed to a static beryllium-bearing molten fluoride salt, 2LiF–BeF 2 for 500 and 1000 h at 750 °C. Overall, the single crystal and polycrystalline SiC materials experienced slight weight loss and nominal surface etching regardless of the material type. Localized pitting and nonuniform Si removal from surface regions were associated with trace metal impurities and oxygen. Cross-sectional observation revealed minimal subsurface changes in the microstructure. The corrosion damage processes were similar to those reported for molten LiF–KF–NaF salt with trace impurities, indicating that the impurities significantly affect SiC corrosion.

36 MATERIALS SCIENCE↗

Structural, microstructural and thermal properties of lead-free bismuth–sodium–barium–titanate piezoceramics synthesized by mechanical alloying

Graphical abstract: Mechano-synthesis of lead-free (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} piezoceramics with nanocrystalline/amorphous structure and homogeneous composition: partial transformation of constituents to BNBT, BNT and pyrochlore, amorphous phase formation, mechano-crystallization of the amorphous, pyrochlore-to-perovskite BNBT phase transformation during the process. Display Omitted Highlights: ► Perovskite BNBT powders with homogeneous composition were synthesized by MA. ► Partial transformation of constituents to BNBT, BNT and pyrochlore occurred by MA. ► Formation of an amorphous phase and afterwards its crystallization occurred by MA. ► Pyrochlore-to-perovskite BNBT phase transformation occurred after prolong milling. ► Polymorphic transformations of TiO{sub 2} act as the main alloying impediment during MA. -- Abstract: Bismuth–sodium–barium–titanate piezoceramics with a composition of (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} (BNBT) were prepared by mechanical alloying (MA). Structural analysis and phase identification were performed by X-ray diffraction (XRD). Microstructural studies and chemical composition homogeneity were performed by scanning electron microscope (SEM) coupled with energy dispersive X-ray analysis (EDX). Furthermore, thermal properties of the as-milled powders were evaluated by thermogravimetry/differential thermal analysis (TG/DTA). During the initial milling, the constituents were transformed to the perovskite, pyrochlore, and BNT phases; in addition, partial amorphization of the structure appeared during the milling cycle. As MA progressed, transformation of pyrochlore-to-perovskite and crystallization of the amorphous phase occurred and also, the BNBT phase was significantly developed. It was found that the MA process has the ability to synthesize the BNBT powders with a submicron particle size, regular morphology, and uniform elemental distribution.

36 MATERIALS SCIENCE↗

Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy

The determination of elastic properties of plasma-sprayed ceramic and metallic coatings is difficult due to their complex microstructure, which involves a myriad array of pores, interfaces and other defects. Furthermore, the splat-based build-up of the coating results in transverse anisotropy in the elastic properties. In this paper, we report on the anisotropic elastic properties of these coatings determined by resonant ultrasound spectroscopy (RUS). This approach along with the analysis presented enables, for the first time, the determination of elastic properties as a function of direction and temperature for these complex systems with concomitant implications for design. The coating systems investigated included plasma-sprayed yttria-stabilized zirconia (YSZ) and nickel. An additional nickel coating deposited by high-velocity oxygen-fuel process was investigated and its elastic properties were compared to those of plasma-sprayed nickel. Average Young s moduli of the coatings were independently measured by using the instrumented indentation method. The elastic properties determined from the RUS and indentation methodologies allowed description of the microstructure elastic property relationships in the coatings.

36 MATERIALS SCIENCE↗

Influence of the interface structure on the thermo-mechanical properties of Cu-X (X = Cr or B)/carbon fiber composites

Highlights: Black-Right-Pointing-Pointer Two copper alloys/carbon fibers composites have been produced. Black-Right-Pointing-Pointer Correlation of the thermo-mechanical properties with the microstructure and the chemistry. Black-Right-Pointing-Pointer A composite with CTE 25% lower than a classic Cu/CF composite has been obtained. -- Abstract: This study focuses on the fabrication, for power electronics applications, of adaptive heat sink material using copper alloys/carbon fibers (CF) composites. In order to obtain composite material with good thermal conductivity and a coefficient of thermal expansion close to the ceramic substrate, it is necessary to have a strong matrix/reinforcement bond. Since there is no reaction between copper and carbon, a carbide element (chromium or boron) is added to the copper matrix to create a strong chemical bond. Composite materials (Cu-B/CF and Cu-Cr/CF) have been produced by a powder metallurgy process followed by an annealing treatment in order to create the carbide at the interphase. Chemical (Electron Probe Micro-Analysis, Auger Electron Spectroscopy) and microstructural (Scanning and Transmission Electron Microscopies) techniques were used to study the location of the alloying element and the carbide formation before and after diffusion. Finally, the thermo-mechanical properties have been measured and a promising composite material with a coefficient of thermal expansion 25% lower than a classic copper/carbon heat sink has been obtained.

36 MATERIALS SCIENCE↗

Nano-scale stoichiometry analysis of a high temperature superconductor by atom probe tomography

The functional properties of the high-temperature superconductor Y 1 Ba 2 Cu 3 O 7-δ (Y-123) are closely correlated to the exact stoichiometry and oxygen content. Exceeding the critical value of 1 oxygen vacancy for every five unit cells (δ>0.2, which translates to a 1.5 at% deviation from the nominal oxygen stoichiometry of Y 7.7 Ba 15.3 Cu 23 O 54-δ ) is sufficient to alter the superconducting properties. Stoichiometry at the nanometer scale, particularly of oxygen and other lighter elements, is extremely difficult to quantify in complex functional ceramics by most currently available analytical techniques. The present study is an analysis and optimization of the experimental conditions required to quantify the local nanoscale stoichiometry of single crystal yttrium barium copper oxide (YBCO) samples in three dimensions by atom probe tomography (APT). APT analysis required systematic exploration of a wide range of data acquisition and processing conditions to calibrate the measurements. Laser pulse energy, ion identification, and the choice of range widths were all found to influence composition measurements. The final composition obtained from melt-grown crystals with optimized superconducting properties was Y 7.9 Ba 10.4 Cu 24.4 O 57.2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗