Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Electrochemical Characterization of Semiconductor Materials and Structures

For a period covering October 1, 1995 through August 12, 1996, the research group at CSU has conducted theoretical and experimental research on "Electrochemical Characterization of Semiconductor Materials and Structures. " The objective of this investigation was to demonstrate the applicability of electrochemical techniques for characterization of complex device structures based on InP and GaAs, Ge, InGaAs, InSb, InAs and InSb, including: (1) accurate EC-V net majority carrier concentration depth profiling, and (2) surface and bulk structural and electrical type defect densities. Our motivation for this R&D effort was as follows: "Advanced space solar cells and ThermoPhotoVoltaic (TPV) cells are fabricated using a large variety of III-V materials based on InP and GaAs for solar cells and low bandgap materials such as Ge, InGaAs, InAs and InSb for TPV applications. At the present time for complex device structures using these materials, however, there is no simple way to assess the quality of these structures prior to device fabrication. Therefore, process optimization is a very time consuming and a costly endeavor". Completion of this R&D effort would have had unquestionable benefits for space solar cell and TPV cells, since electrochemical characterization of the above cell structures, if properly designed can provide many useful structural and electrical material information virtually at any depth inside various layers and at the interfaces. This, could have been applied for step-by-step process optimization, which could have been used for fabrication of new generation high efficiency, low cost space PV and TPV cells.

Source record↗
DOE OSTI2022

Monitoring of mechanical changes in a pipe assembly with complex geometry using multi-mode acoustic signals

Guided wave ultrasonic testing has been widely used for nondestructive and long-range evaluation of diverse mechanical structures, such as pipes and plates. In general, a large number of guided wave modes exist even in the simplest geometries, and they exhibit highly dispersive characteristics. Thus, sophisticated excitation methods and elaborate modal analyses need to be implemented to excite, acquire, and process well-defined pure modes as part of such a measurement method. If the interrogated structure has complex geometry, for example, with cross-sectional variations or multiple joints, the utilization of pure modes becomes significantly more difficult. To overcome this difficulty, this paper proposes the use of multi-mode, multi-frequency guided waves for long-range inspection of structures with arbitrarily complex geometries. Furthermore, using broadband chirp signals and multi-mode time–frequency analysis in a prototypical complex pipe assembly that includes multiple pipe diameters, elbows, and flange connections, we experimentally show sensitive detection of mechanical changes (both material addition and loss). In addition, we demonstrate that the complexity of the structure can be modeled in the digital domain with sufficient detail to allow accurate numerical simulation of the acoustic response using this method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Review on crystal structures and magnetic properties of RTX 3 materials

The structural and compositional diversity of the RTX 3 family of materials offers various magnetic and thermodynamic properties such as complex magnetic structure, vibronic bound states, heavy-fermions, valence fluctuations, metamagnetism, spin glass behavior, quantum criticality, and unconventional superconductivity. In this study we present an overview of the crystal structures, crystal growth and magnetic properties of RTX 3 compounds as well as a discussion of the relevant physics. The magnetic properties of several compounds of the RTX 3 family still remain unexplored. The compounds with a complex magnetic structure could potentially host exotic topological phases. This review article may help explore exotic magnetic properties such as the vibron state and topological spin textures.

quantum materials↗
DOE OSTI2022

Cryo-EM structures of light-harvesting 2 complexes from Rhodopseudomonas palustris reveal the molecular origin of absorption tuning

The genomes of some purple photosynthetic bacteria contain a multigene puc family encoding a series of α- and β-polypeptides that together form a heterogeneous antenna of light-harvesting 2 (LH2) complexes. To unravel this complexity, we generated four sets of puc deletion mutants in Rhodopseudomonas palustris , each encoding a single type of pucBA gene pair and enabling the purification of complexes designated as PucA-LH2, PucB-LH2, PucD-LH2, and PucE-LH2. The structures of all four purified LH2 complexes were determined by cryogenic electron microscopy (cryo-EM) at resolutions ranging from 2.7 to 3.6 Å. Uniquely, each of these complexes contains a hitherto unknown polypeptide, γ, that forms an extended undulating ribbon that lies in the plane of the membrane and that encloses six of the nine LH2 αβ-subunits. The γ-subunit, which is located near to the cytoplasmic side of the complex, breaks the C9 symmetry of the LH2 complex and binds six extra bacteriochlorophylls (BChls) that enhance the 800-nm absorption of each complex. The structures show that all four complexes have two complete rings of BChls, conferring absorption bands centered at 800 and 850 nm on the PucA-LH2, PucB-LH2, and PucE-LH2 complexes, but, unusually, the PucD-LH2 antenna has only a single strong near-infared (NIR) absorption peak at 803 nm. Comparison of the cryo-EM structures of these LH2 complexes reveals altered patterns of hydrogen bonds between LH2 αβ-side chains and the bacteriochlorin rings, further emphasizing the major role that H bonds play in spectral tuning of bacterial antenna complexes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Hydrothermal synthesis and structural characterization of several complex rare earth tantalates: Ln 2 TaO 5 (OH) (Ln = La, Pr) and Ln 3 Ta 2 O 9 (OH) (Ln = Pr, Nd)

Reactions are reported of early rare earth oxides, RE 2 O 3 (RE = La, Pr, Nd) with Ta 2 O 5 under hydrothermal conditions (650 °C, 1.5 kbar) in concentrated aqueous hydroxide (20–30 M KOH) as a mineralizer. Under various stoichiometries several members of two new structure types were isolated, Ln 2 TaO 5 (OH) (Ln = La, Pr) and Ln 3 Ta 2 O 9 (OH) (Ln = Pr, Nd). The analogous niobate La 2 NbO 5 (OH) was also obtained. Both structure types were characterized by single crystal X-ray diffraction and contain pentavalent tantalatum oxide octahedra and complex rare earth oxide frameworks. The Ln 2 TaO 5 (OH) structure type contains Ln–O 8 and Ln–O 9 building blocks and TaO 6 octahedra in a 3-D framework. It contains a 3-D rare earth oxide framework formed by from zig-zag chains of rare earth oxides linking sheets of rare earth oxides. The tantalates form edge-shared Ta 2 O 10 dimers occupying gaps in the rare earth oxide frameworks. The structure of Ln 3 Ta 2 O 9 (OH) contains two types of 2-D rare earth oxide slabs built of seven and eight coordinate rare earth metals. The tantalate units form 2-D slabs through a multiple corner-sharing scheme of TaO 6 octahedra. The Ln 3 Ta 2 O 9 (OH) structure type has an interesting close structural relationship to the previously reported rare earth titanate La 5 Ti 4 O 15 (OH), which is discussed. The presence of hydroxide in the lattice is confirmed by IR spectroscopy and the H atom locations are assigned unambiguously using bond valence sums.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Classification of Intensity Distributions of Transmission Eigenchannels of Disordered Nanophotonic Structures Using Machine Learning

Light-matter interaction optimization in complex nanophotonic structures is a critical step towards the tailored performance of photonic devices. The increasing complexity of such systems requires new optimization strategies beyond intuitive methods. For example, in disordered photonic structures, the spatial distribution of energy densities has large random fluctuations due to the interference of multiply scattered electromagnetic waves, even though the statistically averaged spatial profiles of the transmission eigenchannels are universal. Classification of these eigenchannels for a single configuration based on visualization of intensity distributions is difficult. However, successful classification could provide vital information about disordered nanophotonic structures. Emerging methods in machine learning have enabled new investigations into optimized photonic structures. In this work, we combine intensity distributions of the transmission eigenchannels and the transmitted speckle-like intensity patterns to classify the eigenchannels of a single configuration of disordered photonic structures using machine learning techniques. Specifically, we leverage supervised learning methods, such as decision trees and fully connected neural networks, to achieve classification of these transmission eigenchannels based on their intensity distributions with an accuracy greater than 99%, even with a dataset including photonic devices of various disorder strengths. Simultaneous classification of the transmission eigenchannels and the relative disorder strength of the nanophotonic structure is also possible. Our results open new directions for machine learning assisted speckle-based metrology and demonstrate a novel approach to classifying nanophotonic structures based on their electromagnetic field distributions. These insights can be of paramount importance for optimizing light-matter interactions at the nanoscale.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Redox-active dinuclear oxorhenium(V) pyrazolate complexes

Four new structurally similar dinuclear oxorhenium(V) complexes, [{Re(O)X(PPh 3 )} 2 (μ-O)(μ-4-x'-pz) 2 ], where pz = pyrazolate anion, X = X' = Cl (1) and Br (4), X = Cl, X' = Br (2), and X = Br, X' = Cl (3), have been synthesized and characterized. Little variation in spectroscopic features – 1 H NMR, IR, UV–Vis – exists among the four complexes. All complexes possess a bent Re-O-Re core as well as distorted octahedral coordination geometry around the rhenium centers. Finally, a reversible one-electron electrochemical process is observed at approximately 0.84 V vs. Fc + /Fc in all four complexes; however, changing the terminal halide from chloride to bromide slightly destabilizes the oxidized Re(VI) center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Complex Dirac-like Electronic Structure in Atomic Site-Ordered Rh 3 In 3.4 Ge 3.6

We report the synthesis via an indium flux method of a novel single-crystalline compound Rh 3 In 3.4 Ge 3.6 that belongs to the cubic Ir 3 Ge 7 structure type. In Rh 3 In 3.4 Ge 3.6 , the In and Ge atoms preferentially occupy, respectively, the 12d and 16f sites of the Im3¯m space group, thus creating a colored variant of the Ir 3 Ge 7 structure. Like the other compounds of the Ir 3 Ge 7 family, Rh 3 In 3.4 Ge 3.6 shows potential as a thermoelectric, displaying a relatively large power factor, PF ~ 2 mW/cm K 2 , at a temperature T ~ 225 K, albeit showing a modest figure of merit, ZT = 8 x 10 -4 , because of the lack of a finite band gap. These figures might improve through a use of chemical substitution strategies to achieve band gap opening. Remarkably, electronic band structure calculations reveal that this compound displays a complex Dirac-like electronic structure relatively close to the Fermi level. The electronic structure is composed of several Dirac type-I and type-II nodes, and even Dirac type-III nodes that result from the touching between a flat band and a linearly dispersing band. Here, this rich Dirac-like electronic dispersion suggests the possibility to observe experimentally Dirac type-III nodes and study their role in the physical properties of Rh 3 In 3.4 Ge 3.6 and related Ir 3 Ge 7 -type materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2020

Probabilistic Modeling of Heavy Machinery Using Machine Learning

NASA Glenn Research Center’s facility operations seeks to leverage its extensive instrumentation and historical data with machine learning to increase system efficiencies. The ultimate goal of this effort is to probabilistically model the behavior of Glenn’s central air service compressors for optimal decision making and planning. This project is a first step in that direction. We propose a multimodel approach that uses high-dimensional models to ask simple questions about complex dependent structures, and low-dimensional models to ask complex questions about simple dependent structures. While the low-dimensional models make strong assumptions, they can be visualized and they can be insightful. We show good fits for univariate models of compressor sensors, and preliminary work on high-dimensional multivariate models.

Machine learning↗
DOE OSTI2022

Structure-Function and Nearest Neighbor Interactions of the Cytochrome b 6 f Complex

Test prediction from our (i) high resolution (2.5 Å) structure of cyanobacterial cytochrome b 6 f complex (Structure, 22, 1008-1015, 2014), and (ii) analysis of quinone/quinol traffic within the b 6 f complex (Biophys. J., 107, 1620-1628, 2014) concerning the rate-limiting step in the linear (non-cyclic) electron transport chain. It was concluded that it arises from access of plastoquinol, the electron/proton donor, to the high potential electron carriers, i. e., the Fe 2 S 2 and cytochrome f proteins. The directed motion of the quinol proceeds via a narrow channel on the lumen or electrochemically positive, p- (lumen) side of the b 6 f complex which was defined by crystal structures of the b 6 f complex with quinol analogue inhibitors (J. Mol. Biol., 370, 39-52, 2007).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Polyoxometalate-Assisted Crystallization: A General Strategy Enabling Structural Characterization of Molecular Radium Complexes

A fundamental understanding of radium (Ra) coordination chemistry has been hindered by the scarcity and radiological hazards of 226 Ra, leaving the structural characterization of molecular Ra complexes almost entirely unexplored. Here, we introduce a polyoxometalate (POM)-assisted crystallization strategy that enables single-crystal X-ray diffraction analysis of Ra–chelator complexes from microgram-scale samples. Employing the plenary Keggin anion [SiW 12 O 40 ] 4– , we isolated and structurally characterized Ra 2+ complexes of 18-crown-6 and the bis-picolinate macrocycle macropa, together with their Sr 2+ and Ba 2+ analogues. The resulting structures reveal systematic, size-dependent trends in coordination number and metal-donor distances across the alkaline earth series and provide the first direct experimental measurements of Ra–N and Ra–OCOO bond distances. Together, these results establish POM-assisted crystallization as a robust approach for obtaining solid-state structural information on Ra 2+ complexes of organic chelators, opening new opportunities to advance the coordination chemistry needed to fully realize radium’s potential in isotope production and targeted radiotherapy. More broadly, this approach expands the experimental toolkit available for studying scarce, highly radioactive elements accessible only in microgram quantities.

Anions↗
DOE OSTI2019

Critical Review of Chemical Complexity Effect on Local Structure of Multi-principal-Element Alloys

The multi-principal-element alloy (MPEA) strategy has radically changed the pathway of alloy development by shifting the search for useful alloys from the corners to the center region of the phase diagram. Distinct from conventional one-principal-element alloys, chemically complex MPEAs exhibit extreme diversity in terms of atomic size and chemistry, potentially distorting their local structure. In this study, we summarize recent experimental and theoretical progress on study of the local structure of such materials, with emphases on local lattice distortion and the charge transfer effect.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Physical interpretation and development of ultrasonic nondestructive evaluation techniques applied to the quantitative characterization of textile composite materials

In this Progress Report, we describe our continuing research activities concerning the development and implementation of advanced ultrasonic nondestructive evaluation methods applied to the inspection and characterization of complex composite structures. We explore the feasibility of implementing medical linear array imaging technology as a viable ultrasonic-based nondestructive evaluation method to inspect and characterize complex materials. As an initial step toward the application of linear array imaging technology to the interrogation of a wide range of complex composite structures, we present images obtained using an unmodified medical ultrasonic imaging system of two epoxy-bonded aluminum plate specimens, each with intentionally disbonded regions. These images are compared with corresponding conventional ultrasonic contact transducer measurements in order to assess whether these images can detect disbonded regions and provide information regarding the nature of the disbonded region. We present a description of a standoff/delay fixture which has been designed, constructed, and implemented on a Hewlett-Packard SONOS 1500 medical imaging system. This standoff/delay fixture, when attached to a 7.5 MHz linear array probe, greatly enhances our ability to interrogate flat plate specimens. The final section of this Progress Report describes a woven composite plate specimen that has been specially machined to include intentional flaws. This woven composite specimen will allow us to assess the feasibility of applying linear array imaging technology to the inspection and characterization of complex textile composite materials. We anticipate the results of this on-going investigation may provide a step toward the development of a rapid, real-time, and portable method of ultrasonic inspection and characterization based on linear array technology.

Miller, James G.↗
DOE OSTI2020

Clathrate XI K 58 Zn 122 Sb 207 : A New Branch on the Clathrate Family Tree

Abstract The compositional screening of K‐Zn‐Sb ternary system aided by machine learning, rapid exploratory synthesis using KH salt‐like precursor and in situ powder X‐ray diffraction yielded a novel clathrate type XI K 58 Zn 122 Sb 207 . This clathrate consists of a 3D Zn‐Sb framework hosting K + ions inside polyhedral cages, some of which are reminiscent of known clathrate types while others are unique to this structure type. The complex non‐centrosymmetric structure in the tetragonal space group was solved by means of single crystal X‐ray diffraction as a 6‐component twin due to pseudocubic symmetry and further confirmed by high‐resolution synchrotron powder X‐ray diffraction and state‐of‐the‐art scanning transmission electron microscopy. The electron‐precise composition of this clathrate yields narrow‐gap p ‐type semiconductor with extraordinarily low thermal conductivity due to displacement or “rattling” of K cations inside oversized cages and as well as to twinning, stacking faults and antiphase boundary defects.

Cox, Tori↗
DOE OSTI2020

Theoretical, Solid‐State, and Solution Quantification of the Hydrogen Bond‐Enhanced Halogen Bond

Abstract Proximal noncovalent forces are commonplace in natural systems and understanding the consequences of their juxtaposition is critical. This paper experimentally quantifies for the first time a Hydrogen Bond‐Enhanced Halogen Bond (HBeXB) without the complexities of protein structure or preorganization. An HBeXB is a halogen bond that has been strengthened when the halogen donor simultaneously accepts a hydrogen bond. Our theoretical studies suggest that electron‐rich halogen bond donors are strengthened most by an adjacent hydrogen bond. Furthermore, stronger hydrogen bond donors enhance the halogen bond the most. X‐ray crystal structures of halide complexes (X − =Br − , I − ) reveal that HBeXBs produce shorter halogen bonds than non‐hydrogen bond analogues. 19 F NMR titrations with chloride highlight that the HBeXB analogue exhibits stronger binding. Together, these results form the foundation for future studies concerning hydrogen bonds and halogen bonds in close proximity.

Decato, Daniel A.↗
DOE OSTI2020

Clathrate XI K 58 Zn 122 Sb 207 : A New Branch on the Clathrate Family Tree

Abstract The compositional screening of K‐Zn‐Sb ternary system aided by machine learning, rapid exploratory synthesis using KH salt‐like precursor and in situ powder X‐ray diffraction yielded a novel clathrate type XI K 58 Zn 122 Sb 207 . This clathrate consists of a 3D Zn‐Sb framework hosting K + ions inside polyhedral cages, some of which are reminiscent of known clathrate types while others are unique to this structure type. The complex non‐centrosymmetric structure in the tetragonal space group was solved by means of single crystal X‐ray diffraction as a 6‐component twin due to pseudocubic symmetry and further confirmed by high‐resolution synchrotron powder X‐ray diffraction and state‐of‐the‐art scanning transmission electron microscopy. The electron‐precise composition of this clathrate yields narrow‐gap p ‐type semiconductor with extraordinarily low thermal conductivity due to displacement or “rattling” of K cations inside oversized cages and as well as to twinning, stacking faults and antiphase boundary defects.

Cox, Tori↗
DOE OSTI2020

Theoretical, Solid-State, and Solution Quantification of the Hydrogen Bond-Enhanced Halogen Bond

Proximal noncovalent forces are commonplace in natural systems and understanding the consequences of their juxtaposition is critical. This paper experimentally quantifies for the first time a Hydrogen Bond-Enhanced Halogen Bond (HBeXB) without the complexities of protein structure or preorganization. An HBeXB is a halogen bond that has been strengthened when the halogen donor simultaneously accepts a hydrogen bond. In this work, our theoretical studies suggest that electron-rich halogen bond donors are strengthened most by an adjacent hydrogen bond. Furthermore, stronger hydrogen bond donors enhance the halogen bond the most. X-ray crystal structures of halide complexes (X - =Br - , I - ) reveal that HBeXBs produce shorter halogen bonds than non-hydrogen bond analogues. 19 F NMR titrations with chloride highlight that the HBeXB analogue exhibits stronger binding. Together, these results form the foundation for future studies concerning hydrogen bonds and halogen bonds in close proximity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cation Adaptive Structures Based on Manganese Cyanide Prussian Blue Analogues: Application of Powder Diffraction Data to Solve Complex, Unprecedented Stoichiometries and New Structure Types

Abstract A Mn(II) salt and A + CN − under anaerobic conditions react to form 2‐D and 3‐D extended structured compounds of A m Mn II n (CN) m+2n stoichiometry. Here, the creation and characterization of this large family of compounds, for example AMn II 3 (CN) 7 , A 2 Mn II 3 (CN) 8 , A 2 Mn II 5 (CN) 12 , A 3 Mn II 5 (CN) 13 , and A 2 Mn II [Mn II (CN) 6 ], where A represents alkali and tetraalkylammonium cations, is reviewed. Cs 2 Mn II [Mn II (CN) 6 ] has the typical Prussian blue face centered cubic unit cell. However, the other alkali salts are monoclinic or rhombohedral. This is in accord with smaller alkali cation radii creating void space that is minimized by increasing the van der Waals stabilization energy by reducing ∠Mn−N≡C, which, strengthens the magnetic coupling and increases the magnetic ordering temperatures. This is attributed to the non‐rigidity of the framework structure due the significant ionic character associated with the high‐spin Mn II sites. For larger tetraalkylammonium cations, the high‐spin Mn sites lack sufficient electrostatic A + ⋅⋅⋅NC stabilization and form unexpected 4‐ and 5‐coordinated Mn sites within a flexible, extended framework around the cation; hence, the size, shape, and charge of the cation dictate the unprecedented stoichio‐metry and unpredictable cation adaptive structures. Antiferromagnetic coupling between adjacent Mn II sites leads to ferrimagnetic ordering, but in some cases antiferromagnetic coupling of ferrimagnetic layers are compensated and synthetic antiferromagnets are observed. The magnetic ordering temperatures for ferrimagnetic A 2 Mn II [Mn II (CN) 6 ] with both octahedral high‐ and low‐spin Mn II sites increase with decreasing ∠Mn−N≡C. The crystal structures for all of the extended structured materials were obtained by powder diffraction.

Chemistry↗