Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Nonradiative lifetime extraction using power-dependent relative photoluminescence of III-V semiconductor double-heterostructures

A power-dependent relative photoluminescence measurement method is developed for double-heterostructures composed of III-V semiconductors. Analyzing the data yields insight into the radiative efficiency of the absorbing layer as a function of laser intensity. Four GaAs samples of different thicknesses are characterized, and the measured data are corrected for dependencies of carrier concentration and photon recycling. This correction procedure is described and discussed in detail in order to determine the material's Shockley-Read-Hall lifetime as a function of excitation intensity. The procedure assumes 100% internal radiative efficiency under the highest injection conditions, and we show this leads to less than 0.5% uncertainty. The resulting GaAs material demonstrates a 5.7 ± 0.5 ns nonradiative lifetime across all samples of similar doping (2–3 × 10{sup 17 }cm{sup −3}) for an injected excess carrier concentration below 4 × 10{sup 12 }cm{sup −3}. This increases considerably up to longer than 1 μs under high injection levels due to a trap saturation effect. The method is also shown to give insight into bulk and interface recombination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiple magnetic interactions and large inverse magnetocaloric effect in TbSi and TbSi 0.6 Ge 0.4

We present a comprehensive investigation of the electronic structure, magnetization, specific heat, and crystallography of TbSi (FeB structure type) and TbSi 0.6 ⁢Ge 0.4 (CrB structure type) compounds. Both TbSi and TbSi 0.6 ⁢Ge 0.4 exhibit two antiferromagnetic (AFM) transitions at T N⁢1 ≈ 58 and 57 K, and T N⁢2 ≈ 36 and 44 K, respectively, along with an onset of weak metamagneticlike transition around 6 T between T N⁢1 and T N⁢2 . High-resolution specific heat (C P ) measurements show the second- and first-order nature of the magnetic transition at T N⁢1 and T N⁢2 , respectively, for both samples. However, in the case of TbSi, the low-temperature (LT) AFM to high-temperature (HT) AFM transition takes place via an additional AFM phase at the intermediate temperature (IT), where both LT to IT AFM and IT to HT AFM phase transitions exhibit a first-order nature. Both TbSi and TbSi 0.6 ⁢Ge 0.4 manifest significant magnetic entropy changes (Δ⁢S M ) of 9.6 and 11.6 J/kg-K, respectively, for Δ⁢μ 0 ⁢H=7 T, at T N⁢2 . The HT AFM phase of TbSi 0.6 ⁢Ge 0.4 is found to be more susceptible to the external magnetic field, causing a significant broadening in the peaks of Δ⁢S M curves at higher magnetic fields. Temperature- and field-dependent specific-heat data have been utilized to construct the complex HT phase diagram of these compounds. As a result, temperature-dependent x-ray diffraction measurements demonstrate substantial magnetostriction and anisotropic thermal expansion of the unit cell in both samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Model-independent extraction of the proton charge radius from electron scattering

Constraints from analyticity are combined with experimental electron-proton scattering data to determine the proton charge radius. In contrast to previous determinations, we provide a systematic procedure for analyzing arbitrary data without model-dependent assumptions on the form-factor shape. We also investigate the impact of including electron-neutron scattering data, and {pi}{pi}{yields}NN data. Using representative data sets we find r{sub E}{sup p}=0.870{+-}0.023{+-}0.012 fm using just proton scattering data; r{sub E}{sup p}=0.880{sub -0.020}{sup +0.017{+-}}0.007 fm adding neutron data; and r{sub E}{sup p}=0.871{+-}0.009{+-}0.002{+-}0.002 fm adding {pi}{pi} data. The analysis can be readily extended to other nucleon form factors and derived observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hadronic multiparticle production at ultrahigh energies and extensive air showers

Studies of the nature of cosmic ray particles at the highest energies are based on the measurement of extensive air showers. Most cosmic ray properties can therefore be obtained only from the interpretation of air shower data and are thus dependent on predictions of hadronic interaction models at ultrahigh energies. We discuss different scenarios of model extrapolations from accelerator data to air shower energies and investigate their impact on the corresponding air shower predictions. To explore the effect of different extrapolations by hadronic interaction models we developed an ad hoc model. This model is based on the modification of the output of standard hadronic interaction event generators within the air shower simulation process and allows us to study the impact of changing interaction features on the air shower development. In a systematic study we demonstrate the resulting changes of important air shower observables and also discuss them in terms of the predictions of the Heitler model of air shower cascades. It is found that the results of our ad hoc modifications are, to a large extent, independent of the choice of the underlying hadronic interaction model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Response of a two-dimensional dual-Doppler radar wind synthesis

The wind field resulting from a two-dimensional dual-Doppler synthesis algorithms is spectrally modified from the true wind field. The effects of spatial filtering on wind fields from the processes of interpolation, the averaging of pulses, and the effect of the finite radar pulse dimension were assessed. The effect resulting from the use of different interpolation techniques was also evaluated. Of those techniques tested, the best are the Cressman distance-weighted averaging and linear distance-weighted averaging, with the closest neighbor and uniform weighting having more undesirable characteristics. The optimum influence radius is defined as the influence radius at which the ratio of the rms difference between the Fourier and least-squares responses (a measure of the aliasing) and the variance of the filtered wind field is minimized. This seeks to minimize the effect of energy aliased into scales other than the input wavelength. For the Cressman interpolation technique, the optimum influence radius is between 1.85 and 2.25 times the maximum data spacing. The range of acceptable influence radii includes consideration of the filtering by the radar of the data as it is collected, as well as the resolution of the final dataset. The optimum influence radius is dependent upon the largest data separation in the analysis domain. The absolute optimum influence radius is not significantly affected by inclusion of the radar-beam filtering effects.

Given, Terence↗

Position-dependent correlation function from the SDSS-III Baryon Oscillation Spectroscopic Survey Data Release 10 CMASS sample

We report on the first measurement of the three-point function with the position-dependent correlation function from the SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS) Data Release 10 CMASS sample. This new observable measures the correlation between two-point functions of galaxy pairs within different subvolumes, ξ-circumflex (ř,ř{sub L}), where ř{sub L} is the location of a subvolume, and the corresponding mean overdensities, δ-bar (ř{sub L}). This correlation, which we call the 'integrated three-point function', iζ(r)≡(ξ-circumflex (ř,ř{sub L})δ-bar (ř{sub L})), measures a three-point function of two short- and one long-wavelength modes, and is generated by nonlinear gravitational evolution and possibly also by the physics of inflation. The iζ(r) measured from the BOSS data lies within the scatter of those from the mock galaxy catalogs in redshift space, yielding a ten-percent-level determination of the amplitude of iζ(r). The tree-level perturbation theory in redshift space predicts how this amplitude depends on the linear and quadratic nonlinear galaxy bias parameters (b{sub 1} and b{sub 2}), as well as on the amplitude and linear growth rate of matter fluctuations (σ{sub 8} and f). Combining iζ(r) with the constraints on b{sub 1σ{sub 8}} and fσ{sub 8} from the global two-point correlation function and that on σ{sub 8} from the weak lensing signal of BOSS galaxies, we measure b{sub 2}=0.41±0.41 (68% C.L.) assuming standard perturbation theory at the tree level and the local bias model.

79 ASTRONOMY AND ASTROPHYSICS↗

Combining Spike Time Dependent Plasticity (STDP) and Backpropagation (BP) for Robust and Data Efficient Spiking Neural Networks (SNN)

National security applications require artificial neural networks (ANNs) that consume less power, are fast and dynamic online learners, are fault tolerant, and can learn from unlabeled and imbalanced data. We explore whether two fundamentally different, traditional learning algorithms from artificial intelligence and the biological brain can be merged. We tackle this problem from two directions. First, we start from a theoretical point of view and show that the spike time dependent plasticity (STDP) learning curve observed in biological networks can be derived using the mathematical framework of backpropagation through time. Second, we show that transmission delays, as observed in biological networks, improve the ability of spiking networks to perform classification when trained using a backpropagation of error (BP) method. These results provide evidence that STDP could be compatible with a BP learning rule. Combining these learning algorithms will likely lead to networks more capable of meeting our national security missions.

97 MATHEMATICS AND COMPUTING↗

Nuclear Forensics for Irradiated Materials using Kernel Regression Models

The ultimate purpose of nuclear forensics is to locate the origin of nuclear and other radioactive materials out of regulatory control used in nuclear security events such as classical forensics. For this purpose, some specific characteristics of interdicted materials (referred to as 'signatures') should be defined to compare the known sample database. In some cases, involved with irradiated material, the signatures could be specific amount of fission product inventory depending on reactor operational histories such as reactor type, initial enrichment, burn up rate of nuclear fuel and cooling period after irradiation in the reactor. In order to make inference model for irradiated material for nuclear forensics, we suggested 3 ways as follows; (i) analyzing ORIGEN produced nuclear substances for the fission product inventory, (ii) classifying the range of reactor type, (iii) predicting the operational history from the fission product inventory. In terms of nuclear substance analysis, the construction of spent fuel database has been internationally carried out since ITWG (Nuclear Smuggling International Technical Working Group) was established in 1995. However, enough sample data cannot be obtained in Korea to determine reactor type and operational histories because analyzing nuclear substances have been limited due to the international regulation. Thus, this study does not mention how to obtain mass or ratios of nuclides for the spent fuel. We just have generated simulation sample data as a fission product inventory using ORIGEN to construct spent fuel database. When unidentified radioactive materials are discovered, it is assumed that mass or ratios of the nuclides are analyzed by certain methods which are available in Korea as well as other countries. Then, a reactor type is determined, and finally, regression model can locate the origin or source of the radioactive materials by inferring operational histories using the fission product inventory. There are some studies on the classification of reactor type using statistical methods. As a part of predicting the operational history, this paper focuses on the development of spent fuel inference algorithm for nuclear forensics to estimate reactor operational histories that reflect characteristics of a reactor from the fission product inventory. The spent fuel inference algorithm for nuclear forensics has been developed on the basis of Kernel Regression (KR) which can conditionally generate the estimated output data by giving weight depending on geometric distance between sample data and input data. Also the KR which comprises Auto-Associative KR and Inferential KR have some benefits that can estimate only using data without assumption for specific physical model and re-learning process. Auto-associative KR (AAKR) was used to sort out outliers of input data and Inferential KR (IKR) was carried out to predict the operational histories for spent fuel. All of regression algorithms were performed in R programming tool. From the validation of both AAKR and IKR, it is expected that kernel regression has enough accuracy to be applied to nuclear forensics for spent fuel. Once the nuclear substance is measured to fill the fission product inventory with a certain reactor type, this kernel regression algorithm would predict the operational histories of spent fuel with high accuracy. Finally, this information is expected to be useful to find the origin of irradiated materials. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Forward modeling fluctuations in the DESI LRGs target sample using image simulations

We use the forward modeling pipeline, Obiwan, to study the imaging systematics of the Luminous Red Galaxies (LRGs) targeted by the Dark Energy Spectroscopic Instrument (DESI). Imaging systematics refers to the false fluctuation of galaxy densities due to varying observing conditions and astrophysical foregrounds corresponding to the imaging surveys from which DESI LRG target galaxies are selected. We update the Obiwan pipeline, which we previously developed to simulate the optical images used to target DESI data, to further simulate WISE images in the infrared. This addition allows simulating the DESI LRGs sample, which utilizes WISE data in the target selection. Deep DESI imaging data combined with a method to account for biases in their shapes is used to define a truth sample of potential LRG targets. We inject these data evenly throughout the DESI Legacy Imaging Survey footprint at declinations between -30 and 32.375 degrees. We simulate a total of 15 million galaxies to obtain a simulated LRG sample (Obiwan LRGs) that predicts the variations in target density due to imaging properties. We find that the simulations predict the trends with depth observed in the data, including how they depend on the intrinsic brightness of the galaxies. We observe that faint LRGs are the main contributing source of the imaging systematics trend induced by depth. We also find significant trends in the data against Galactic extinction that are not predicted by Obiwan. These trends depend strongly on the particular map of Galactic extinction chosen to test against, implying systematic contamination in the Galactic extinction maps is a likely root cause (e.g., Cosmic-Infrared Background, dust temperature correction). We additionally observe a morphological change of the DESI LRGs population evidenced by a correlation between OII emission line average intensity and the size of the z-band PSF. This effect most likely results from uncertainties in background subtraction. The detailed findings we present should be used to guide any observational systematics mitigation treatment for the clustering of the DESI LRGs sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Discrete-Direct Model Calibration and Uncertainty Propagation Method Confirmed on Multi-Parameter Plasticity Model Calibrated to Sparse Random Field Data

A discrete direct (DD) model calibration and uncertainty propagation approach is explained and demonstrated on a 4-parameter Johnson-Cook (J-C) strain-rate dependent material strength model for an aluminum alloy. The methodology's performance is characterized in many trials involving four random realizations of strain-rate dependent material-test data curves per trial, drawn from a large synthetic population. The J-C model is calibrated to particular combinations of the data curves to obtain calibration parameter sets which are then propagated to “Can Crush” structural model predictions to produce samples of predicted response variability. These are processed with appropriate sparse-sample uncertainty quantification (UQ) methods to estimate various statistics of response with an appropriate level of conservatism. This is tested on 16 output quantities (von Mises stresses and equivalent plastic strains) and it is shown that important statistics of the true variabilities of the 16 quantities are bounded with a high success rate that is reasonably predictable and controllable. The DD approach has several advantages over other calibration-UQ approaches like Bayesian inference for capturing and utilizing the information obtained from typically small numbers of replicate experiments in model calibration situations—especially when sparse replicate functional data are involved like force–displacement curves from material tests. The DD methodology is straightforward and efficient for calibration and propagation problems involving aleatory and epistemic uncertainties in calibration experiments, models, and procedures.

42 ENGINEERING↗

New Measurements of the European Muon Collaboration Effect in Very Light Nuclei

New Jefferson Lab data are presented on the nuclear dependence of the inclusive cross section from {sup 2}H, {sup 3}He, {sup 4}He, {sup 9}Be and {sup 12}C for 0.3<x<0.9, Q{sup 2}{approx_equal}3-6 GeV{sup 2}. These data represent the first measurement of the EMC effect for {sup 3}He at large x and a significant improvement for {sup 4}He. The data do not support previous A-dependent or density-dependent fits to the EMC effect and suggest that the nuclear dependence of the quark distributions may depend on the local nuclear environment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding and Improving the Scale Dependence of Trigger Functions for Convective Parameterization Using Cloud-Resolving Model Data

As the resolution of global climate model increases, whether trigger functions in current convective parameterization schemes still work remains unknown. In this study, the scale dependence of undilute and dilute dCAPE, Bechtold, and heated condensation framework (HCF) triggers is evaluated using the cloud-resolving model (CRM) data. It is found that all these trigger functions are scale dependent, especially for dCAPE-type triggers, with skill scores dropping from ~0.6 at the lower resolutions (128, 64, and 32 km) to only ~0.1 at 4 km. The average convection frequency decreases from 14.1% at 128 km to 2.3% at 4 km in the CRM data, but it increases rapidly in the dCAPE-type triggers and is almost unchanged in the Bechtold and HCF triggers across resolutions, all leading to large overpredictions at higher resolutions. In the dCAPE-type triggers, the increased frequency is due to the increased rate of dCAPE greater than the threshold (65 J kg −1 h −1 ) at higher resolutions. The box-and-whisker plots show that the main body of dCAPE in the correct prediction and overprediction can be separated from each other in most resolutions. Moreover, the underprediction is found to be corresponding to the decaying phase of convection. Hence, two modifications are proposed to improve the scale dependence of the undilute dCAPE trigger: 1) increasing the dCAPE threshold and 2) considering convection history, which checks whether there is convection prior to the current time. With these modifications, the skill at 16 km, 8 km, and 4 km can be increased from 0.50, 0.27, and 0.15 to 0.70, 0.61, and 0.53, respectively.

Song, Fengfei↗

Methodology to design a municipal solid waste generation and composition map: A case study

Highlights: • To draw a waste generation and composition map of a town a lot of factors must be taken into account. • The methodology proposed offers two different depending on the available data combined with geographical information systems. • The methodology has been applied to a Spanish city with success. • The methodology will be a useful tool to organize the municipal solid waste management. - Abstract: The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has been successfully applied to a Spanish town.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dimensions and aspect ratios of natural ice crystals

During the 2006 Tropical Warm Pool International Cloud Experiment (TWP-ICE) in the tropics, the 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) in the Arctic, and the 2010 Small PARTicles In CirrUS (SPARTICUS) campaign at mid-latitudes, high-resolution images of ice crystals were recorded by a Cloud Particle Imager at temperatures ( T ) between -87 and 0 °C. The projected maximum dimension ( D '), length ( L '), and width ( W ') of pristine columns, plates, and component bullets of bullet rosettes were measured using newly developed software, the Ice Crystal Ruler. The number of bullets in each bullet rosette was also measured. Column crystals were further distinguished as either horizontally oriented columns or columns with other orientations to eliminate any orientation effect on the measured dimensions. The dimensions and aspect ratios (AR, the dimension of the major axis divided by the dimension of the minor axis) of crystals were determined as functions of temperature, geophysical location, and type of cirrus. Dimensions of crystals generally increased with temperature. Columns and bullets had larger dimensions (i.e., W ') of the minor axis (i.e., a axis) for a given dimension (i.e., D ' or L ') of the major axis (i.e., c axis), and thus smaller AR, as T increased, whereas this trend did not occur for plate crystals. The average number of branches in bullet rosettes was 5.50 ± 1.35 during three campaigns and 6.32 ± 1.34 (5.46 ± 1.34; 4.95 ± 1.01) during TWP-ICE (SPARTICUS; ISDAC). The AR of bullets increased with the number of branches in bullet rosettes. Most dimensions of crystals and ARs of columnar crystals measured during SPARTICUS were larger than those measured during TWP-ICE and ISDAC at &minus;67 < T < -35 °C and at &minus;40 < T < &minus;15 °C, respectively. The relative occurrence of varying pristine habits depended strongly on cirrus type (i.e., anvil or non-anvil clouds), with plates especially occurring more frequently in anvils. The L – W relationships of columns derived using current data exhibited a strong dependence on temperature; similar relationships determined in previous studies were within the range of the current data.

54 ENVIRONMENTAL SCIENCES↗

Is the Calcite-Water Interface Understood? Direct Comparisons of Molecular Dynamics Simulations with Specular X-ray Reflectivity Data

New insights into the structure of the calcite-water interface are obtained through direct model-independent comparison of multiple classical molecular dynamics (MD) simulations with high-resolution specular X-ray reflectivity (XR) data. This set of comparisons, with four different state-of-the-art force fields (including two non-polarizable, one polarizable, and one reactive force field), reveal new insights into the absolute accuracy of the simulated structures and the uniqueness of the XR-derived structural results. These four simulations, while qualitatively similar, have visibly distinct interfacial structure, and are distinguished through a quantitative comparison of the XR signals calculated from these simulations with experimental XR data. The results demonstrate that the simulated calcite-water interface structures, as a whole, are not consistent with the XR data (i.e., within their precision and accuracy). This disagreement is largely due to the simulation of the calcite lattice. The simulated interfacial water profiles show substantially different levels of agreement with the XR data. Of these, the rigid-ion model (RIM) simulations show the best consistency with the experimental XR data. Further model-dependent comparisons of the structural parameters that describe the interfacial structure (derived from both the MD simulations and the XR data) provide further insight into the sources of differences between these two approaches. Using the new insights from the RIM simulations, new structures of the calcite-water interface consistent with both the experimental data and the simulation are identified and compared to recent results.

Calcite-water interface↗

Isospin Dependent Pairing Interactions and BCS-BEC crossover

We propose new types of density dependent contact pairing interaction which reproduce the pairing gaps in symmetric and neutron matters obtained by a microscopic treatment based on the realistic nucleon-nucleon interaction. The BCS-BEC crossover of neutrons pairs in symmetric and asymmetric nuclear matters is studied by using these contact interactions. It is shown that the bare and screened pairing interactions lead to different features of the BCS-BEC crossover in symmetric nuclear matter. We perform Hartree-Fock-Bogoliubov (HFB) calculations for semi-magic Calcium, Nickel, Tin and Lead isotopes and N = 20, 28, 50 and 82 isotones using these density-dependent pairing interactions. Our calculations well account for the experimental data for the neutron number dependence of binding energy, two neutrons separation energy, and odd-even mass staggering of these isotopes. Especially the interaction IS+IV Bare without the medium polarization effect gives satisfactory results for all the isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First principle study of elastic and thermodynamic properties of FeB{sub 4} under high pressure

The elastic properties, elastic anisotropy, and thermodynamic properties of the lately synthesized orthorhombic FeB{sub 4} at high pressures are investigated using first-principles density functional calculations. The calculated equilibrium parameters are in good agreement with the available experimental and theoretical data. The obtained normalized volume dependence of high pressure is consistent with the previous experimental data investigated using high-pressure synchrotron x-ray diffraction. The complete elastic tensors and crystal anisotropies of the FeB{sub 4} are also determined in the pressure range of 0–100 GPa. By the elastic stability criteria and vibrational frequencies, it is predicted that the orthorhombic FeB{sub 4} is stable up to 100 GPa. In addition, the calculated B/G ratio reveals that FeB{sub 4} possesses brittle nature in the range of pressure from 0 to 100 GPa. The calculated elastic anisotropic factors suggest that FeB{sub 4} is elastically anisotropic. By using quasi-harmonic Debye model, the compressibility, bulk modulus, the coefficient of thermal expansion, the heat capacity, and the Grüneisen parameter of FeB{sub 4} are successfully obtained in the present work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗