Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Atom probe tomography characterization of ion and neutron irradiated Alloy 800H

Alloy 800H is a high temperature and creep resistant alloy, and is considered as a candidate alloy for use in Generation IV nuclear reactor systems. To clarify the alloy's behavior under irradiation, samples were subjected to single ion irradiations up to 20 dpa at 440°C, a dual ion/He irradiation to 17 dpa at 460°C, and a neutron irradiation to 17 dpa at 385°C. The irradiated microstructures were characterized using atom probe tomography to complement previously published transmission electron microscopy studies. Additionally, after single ion irradiation, sparse fine Al and Ti clusters were observed after 1dpa, while high number densities of nanoscale Ni-Al-Ti clusters, Cr-Ti rich carbides, and Si-decorated dislocation loops developed after 10 and 20 dpa. The microstructure formed during single ion irradiation exhibited a strong depth dependence. No significant differences were observed between the single and dual ion irradiations. While Ni-Al-Ti clusters, Cr-Ti rich carbides, and Si-decorated dislocation loops were also observed after neutron irradiation, the neutron-irradiated microstructure differed from those found in the ion-irradiated samples.

36 MATERIALS SCIENCE↗

A theoretical study of solid solution strengthening in the refractory medium entropy alloy Nb 45 Ta 25 Ti 15 Hf 15

The refractory medium-entropy alloy (RMEA) Nb 45 Ta 25 Ti 15 Hf 15 exhibits exceptional tensile ductility and fracture toughness at ambient temperature, but its engineering applications are limited by a lack of high temperature strength. Using a machine-learning interatomic potential (MLIP) with near-density functional theory (DFT) accuracy, we conducted molecular dynamics (MD) and statics simulations of the behavior of dislocations with both screw and edge characters. We also analyze experimentally measured yield strengths using the Rao-Suzuki model and the Maresca-Curtin model modified to include a temperature-dependent shear modulus and a bulk modulus-dependent misfit volume, thereby uncovering the mechanisms underlying the yielding of this RMEA. Compared with the published experimental yield strength, the models parameterized by the MLIP effectively reproduce the experimental results over a wide temperature range. The models and MD simulations indicate that yielding is governed by screw dislocations, with dipole dragging as the dominant mechanism. In MD simulations, we observed a potential softening mechanism not considered by the Rao-Suzuki screw model: slow migration of interstitial jogs along the dislocation core, which could lead to the annihilation of vacancy and interstitial jog pairs by their combination.

BCC complex concentrated alloys↗

Properties of Ti/TiC Interfaces from Molecular Dynamics Simulations

Titanium carbide is used as a primary component in coating materials, thin films for electronic devices, and composites. Here, the structure of coherent and semicoherent interfaces formed between close-packed TiC (111) and Ti (0001) is investigated in classical molecular dynamics simulations. The forces on the atoms in the simulations are determined using a newly developed TiC potential under the framework of the third-generation charge optimized many-body (COMB 3 ) suite of potentials. The work of adhesion energies for the coherent interfaces is calculated and compared with the predictions of density functional theory calculations. In the case of relaxed semicoherent interfaces, a two-dimensional (2D) misfit dislocation network is predicted to form that separates the interface into different regions in which the positions of the atoms are similar to the positions at the corresponding coherent interfaces. After the interface is annealed at an elevated temperature, the climb of edge dislocations is activated which modifies the 2D misfit dislocation network and increases the work of adhesion. These findings can be used as inputs for sequential larger simulation models to understand and predict the macroscopic properties of TiC/Ti interfaces.

36 MATERIALS SCIENCE↗

In situ observation of defect annihilation in Kr ion-irradiated bulk Fe/amorphous-Fe 2 Zr nanocomposite alloy

Enhanced irradiation tolerance in crystalline multilayers has received significant attention lately. However, little is known on the irradiation response of crystal/amorphous nanolayers. We report on in situ Kr ion irradiation studies of a bulk Fe 96 Zr 4 nanocomposite alloy. Irradiation resulted in amorphization of Fe 2 Zr and formed crystal/amorphous nanolayers. α-Fe layers exhibited drastically lower defect density and size than those in large α-Fe grains. In situ video revealed that mobile dislocation loops in α-Fe layers were confined by the crystal/amorphous interfaces and kept migrating to annihilate other defects. This study provides new insights on the design of irradiation-tolerant crystal/amorphous nanocomposites.

36 MATERIALS SCIENCE↗

Phase Field Dislocation Dynamics (PFDD) version 2.x

This disclosure is for version 2.x of a mesoscale model called Phase Field Dislocation Dynamics (PFDD). PFDD is used for investigating deformation in nanoscale (grain sizes of ~300 nm and less) materials, such as metals and alloys. This approach models the motion and interaction of individual defects, namely dislocations, in the material using scalar-valued phase field variables, also called order parameters. The system is evolved through energy minimization thus the model calculates the total energy density in terms of the phase field variables. The energy minimization is completed using the Ginzburg-Landau equation, and is implemented with explicit time integration. The total system energy can be comprised of several terms, including the strain energy (which describes dislocation-dislocation interactions), the energy due to an applied stress (dislocation interactions with the applied stress), and a core/lattice (perfect dislocations) or generalized stacking fault (partial dislocations) energy (described the dislocation core structure). The latter term in particular may vary based on the crystal structure being modeled and is typically informed using lower length scale (e.g., atomistic) approaches, although no such (atomistic) calculations are completed within the PFDD algorithm. This basic formulation was previously reviewed by Los Alamos National Laboratory and released under license number C17113. This previously reviewed version we will henceforth refer to as PFDD v1.0. PFDD v1.0 consisted of 2 codes (one parallel and one serial) plus input files, all written in the C language. This new disclosure is addressing the next versions of the PFDD, versions 2.x. There have been several enhancements of PFDD v1.0, which are described here and included in the attached code, which we will refer to as PFDD v2.0. There are also several new features described here that are either planned or already in process and are expected to be subsequent releases, i.e., v2.1, v2.2, ...v2.x.

Hunter, Abigail↗

Role of refractory inclusions in the radiation-induced microstructure of APMT

Kanthal APMT is a promising FeCrAl-based alloy for accident-tolerant fuel cladding because of its excellent high-temperature oxidation resistance. In this study, powder metallurgy Kanthal APMT alloy, neutron irradiated to 1.8 dpa at nominally 382 °C, was characterized. On-zone STEM imaging revealed that radiation-induced dislocation loops with Burgers vectors of a/2 <111 > or and black dots tended to agglomerate in the vicinity of refractory inclusions. The densities and sizes of these loops decreased with distance from the inclusion-matrix interfaces. In addition, high-resolution energy-dispersive X-ray spectroscopy mapping was used to determine the inclusions to be either yttrium- or silicon-rich, as well as to detect the radial distribution of radiation-enhanced α' phase near these inclusions. A high density of randomly distributed Cr-rich α' phase was found, regardless of the presence of inclusions. Here, the results from this study provide insights into how microstructural features can locally tailor the radiation-induced defects in FeCrAl-based alloys.

36 MATERIALS SCIENCE↗

Decisive role of magnetism in the interaction of chromium and nickel solute atoms with 1/2$\langle$111$\rangle$-screw dislocation core in body-centered cubic iron

Resistance to swelling under irradiation and a low rate of corrosion in high temperature environments make Fe-Cr and Fe-Cr-Ni alloys promising structural materials for energy technologies. In this paper we report the results obtained using a combination of density functional theory (DFT) techniques: plane wave basis set solutions for pseudo-potentials and multiple scattering solutions for all electron potentials. We have found a very strong role of magnetism in the stability of screw dislocation cores in pure Fe and their interaction with Cr and Ni magnetic impurities. In particular, the screw dislocation quadrupole in Fe is stabilized only in the presence of ferromagnetism. In addition, Ni atoms, who's magnetic moment is oriented along the magnetization direction of the Fe matrix, prefer to occupy in core positions whereas Cr atoms, which couple anti-ferromagnetically with the Fe matrix, prefer out of the dislocation core positions. In effect, Ni impurities are attracted to, while Cr impurities are repelled by the dislocation core. Moreover, we demonstrate that this contrasting behavior can be explained only by the nature of magnetic coupling of the impurities to the Fe matrix. In addition, Cr interaction with the dislocation core mirrors that of Ni if the Cr magnetic moment is constrained to be along the direction of Fe matrix magnetization. In addition, we have shown that the magnetic contribution can affect the impurity-impurity interaction at distances up to a few Burgers vectors. In particular, the distance between Cr atoms in Fe matrix should be at least 3–4 lattice parameters in order to eliminate finite size effects.

36 MATERIALS SCIENCE↗

Filamentation of an annular laser beam with a vortex phase dislocation in fused silica

The filamentation of a femtosecond laser pulse in fused silica has been numerically investigated for the case of an annular beam with a phase singularity at a wavelength of 800 nm. The spatiotemporal propagation dynamics of the pulse and the transformation of its frequency-angular spectra are analysed. It is shown that a tubular structure with a radius of 3−4 μm, peak intensity of about 2.4×10{sup 13} W cm{sup −2}, and maximum plasma density on the order of 10{sup 20} cm{sup −3} is formed in the nonlinear focus; the length of this structure significantly exceeds the waist length in the linear case. The results of the analysis are compared with the data obtained for an annular beam free of phase dislocations and for a Gaussian beam. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Complex dislocation loop networks as natural extensions of the sink efficiency of saturated grain boundaries in irradiated metals

The development of radiation-tolerant structural materials is an essential element for the success of advanced nuclear energy concepts. A proven strategy to increase radiation resistance is to create microstructures with a high density of internal defect sinks, such as grain boundaries (GBs). However, as GBs absorb defects, they undergo internal transformations that limit their ability to capture defects indefinitely. Here, we show that, as the sink efficiency of GBs becomes exhausted with increasing irradiation dose, networks of irradiation loops form in the vicinity of saturated or near-saturated GB, maintaining and even increasing their capacity to continue absorbing defects. The formation of these networks fundamentally changes the driving force for defect absorption at GB, from “chemical” to “elastic.” Using thermally-activated dislocation dynamics simulations, we show that these networks are consistent with experimental measurements of defect densities near GB. Our results point to these networks as a natural continuation of the GB once they exhaust their internal defect absorption capacity.

36 MATERIALS SCIENCE↗

Review: mechanical behavior of metal/ceramic interfaces in nanolayered composites—experiments and modeling

In this study, recent experimental and modeling studies in nanolayered metal/ceramic composites are reviewed, with focus on the mechanical behaviors of metal/nitrides interfaces. The experimental and modeling studies of the slip systems in bulk TiN are reviewed first. Then, the experimental studies of interfaces, including co-deformation mechanism by micropillar compression tests, in situ TEM straining tests for the dynamic process of the co-deformation, thickness-dependent fracture behavior, and interrelationship among the interfacial bonding, microstructure, and mechanical response, are reviewed for the specific material systems of Al/TiN and Cu/TiN multilayers at nanoscale. The modeling studies reviewed cover first-principles density functional theory-based modeling, atomistic molecular dynamics simulations, and mesoscale modeling of nanolayered composites using discrete dislocation dynamics. The phase transformation between zinc-blende and wurtzite AlN phases in Al/AlN multilayers at nanoscale is also reviewed. Finally, a summary and perspective of possible research directions and challenges are given.

36 MATERIALS SCIENCE↗

Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718

The poor machinability and extensive work hardening of Ni-based superalloys makes additive manufacturing an attractive option for producing geometrically complex components with distinct microstructures. Although previous studies show recovery of high strength at room temperature, very few studies demonstrate successful properties at elevated temperatures required for industrial applications. Here, the objectives of this study are to present a post-build heat treatment for high strength across a wide temperature range, determine the strength contribution of nanoscale precipitating phases to the overall mechanical properties of superalloy 718, and from these, provide a comprehensive microstructure-property relationship for wrought and AM 718 to guide efforts to simulate the properties of AM components. Laser powder bed fusion–produced superalloy 718 was characterized at multiple length scales using scanning electron microscopy and transmission electron microscopy in the as-built condition and with multiple heat treatments designed to form combinations of γ', γ", and δ precipitates. Uniaxial tensile tests performed from room temperature to 600 °C on subsize specimens determined the yield strength, elastic modulus, ultimate tensile strength, fracture stress, and uniform elongation. Precipitates in this work proved to be weak barriers to dislocation motion through a dispersed barrier model, but they provided strength to the alloy through their consistent high density. The relative contribution to the yield strength from γ" remained consistent between 48% and 57% of the total strength up to 600 °C, the primary influence on the high temperature strength of superalloy 718. The strength factors for γ" and δ precipitates were found to trend inversely with tensile test temperature and may be attributable to the differences in precipitate coherency. A post-build heat treatment is recommended to maintain high strength at elevated temperatures. A quantitative microstructure-property relationship, dependent on precipitate size, density, and morphology, was derived and can estimate the yield strength across a wide temperature range applicable to the operational regimes for superalloy 718.

36 MATERIALS SCIENCE↗

Utilizing a Dynamic Segmentation Convolutional Neural Network for Microstructure Analysis of Additively Manufactured Superalloy 718

Additive manufacturing (AM) is revolutionizing almost all industries through the production of intricate geometries previously prohibited by cost or machinability. Ni-based superalloys form a primary alloy class for high temperature applications in the petrochemical, aerospace, and nuclear industries because of their intrinsic resistance to creep and the ability to heat treat the superalloy for high strength. Despite these attractive properties, the extreme work hardening of Ni-based superalloys makes traditional manufacturing of complex shapes difficult and thus, these alloys are an attractive target for AM. Superalloy 718 was chosen as an example superalloy because of the wide variety of precipitates that can form within its composition space from the repetitive heating and cooling cycles of the AM process. The precipitates and other microstructure features, such as grain boundaries and dislocations, will dictate the mechanical properties and thus, there is an extensive challenge to characterize the size, number density, composition, and volume fraction of each microstructural feature from AM fabrication using analytical electron microscopy. This work focused on the application of a pixel-wise classification machine learning (ML) model called a dynamic segmentation convolutional neural network (DSCNN) to identify the microstructural features of an as-fabricated additively manufactured superalloy 718.

Taller, Stephen↗

Inhomogeneous distribution of defect-related emission in Si-doped AlGaN epitaxial layers with different Al content and Si concentration

The spatial distribution of luminescence in Si-doped AlGaN epitaxial layers that differ in Al content and Si concentration has been studied by cathodoluminescence (CL) mapping in combination with scanning electron microscopy. The density of surface hillocks increased with decreasing Al content and with increasing Si concentration. The mechanisms giving rise to those hillocks are likely different. The hillocks induced surface roughening, and the compositional fluctuation and local donor-acceptor-pair (DAP) emission at hillock edges in AlGaN epitaxial layers were enhanced irrespective of the origin of the hillocks. The intensity of local DAP emission was related to Si concentration, as well as to hillock density. CL observation revealed that DAP emission areas were present inside the samples and were likely related to dislocations concentrated at hillock edges. Possible candidates for acceptors in the observed DAP emission that are closely related in terms of both Si concentration and hillock edges with large deformations are a V{sub III}-Si{sub III} complex and Si{sub N}, which are unfavorable in ordinary III-nitrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature damage evolution in 10 keV He+ irradiated W and W-5Re

Highlights: • High-temperature damage in pure W appeared strongly dependent upon foil thickness. • Visible bubbles occurred at above a threshold fluence of ~ 4.5×10{sup 19} He{sup +}/m{sup 2}. • Dislocations with b = ½ were identified and exhibited a wavy morphology. • The bypass of bubbles by dislocations operated through simple shear. • Rhenium gave rise to ~ 10-40% increase in bubble size and a pronounced change in bubble morphology. - Abstract: High-temperature damage evolution in pure W and W-5Re has been studied by combining transmission electron microscopy and in-situ irradiations with 10 keV He{sup +} ions. The irradiations covered a temperature range of T{sub irr} = 773–1473 K and a fluence range of (4.5–15) × 10{sup 19} He{sup +}/m{sup 2}. In pure W, detailed characterizations have shown that damage evolution is highly dependent upon the foil thickness. Regions of thickness irr from 773 K to 1473 K, a pronounced bubble growth and an increased degree of bubble ordering were observed. In thicker regions (≳100 nm), 1/2<111> dislocation loops and line entanglements were found up to 1473 K, and were often seen to be decorated with helium bubbles. In W-5Re, areas of different foil thickness exhibited only small differences in damage evolution. The densities of bubbles were comparable to those seen in pure W at all temperatures, while the average size of bubbles was found to be ~10–40% higher. The damage microstructure transformed from a mixture of dislocation loops and bubbles at 773 K to dislocation line entanglements decorated with bubbles at 1473 K.

36 MATERIALS SCIENCE↗

Interface Structure and Radiation Damage Resistance in Cu-Nb Multilayer Nanocomposites

We use atomistic simulations to show that upon removal or insertion of atoms, misfit dislocations in Cu-Nb interfaces shift between two adjacent planes, forming pairs of extended jogs. Different jog combinations give rise to interface structures with unlike densities but nearly degenerate energies, making Cu-Nb interfaces virtually inexhaustible sinks for radiation-induced point defects and catalysts for efficient Frenkel pair recombination.

36 MATERIALS SCIENCE↗

Dislocation loop formation in model FeCrAl alloys after neutron irradiation below 1 dpa

FeCrAl alloys with varying compositions and microstructures are under consideration for accident-tolerant fuel cladding, but limited details exist on dislocation loop formation and growth for this class of alloys under neutron irradiation. Four model FeCrAl alloys with chromium contents ranging from 10.01 to 17.51 wt % and alunimum contents of 4.78 to 2.93 wt % were neutron irradiated to doses of 0.3–0.8 displacements per atom (dpa) at temperatures of 335–355°C. On-zone STEM imaging revealed a mixed population of black dots and larger dislocation loops with either a/2< 111 > or a< 100 > Burgers vectors. Weak composition dependencies were observed and varied depending on whether the defect size, number density, or ratio of defect types was of interest. Here, the results were found to mirror those of previous studies on FeCrAl and FeCr alloys irradiated under similar conditions, although distinct differences exist.

36 MATERIALS SCIENCE↗

A defect density-based constitutive crystal plasticity framework for modeling the plastic deformation of Fe-Cr-Al cladding alloys subsequent to irradiation

It is essential to understand the deformation behavior of these Fe-Cr-Al alloys, in order to be able to develop models for predicting their mechanical response under varied loading conditions. Interaction of dislocations with the radiation-induced defects governs the crystallographic deformation mechanisms. A crystal plasticity framework is employed to model these mechanisms in Fe-Cr-Al alloys. This work builds on a previously developed defect density-based crystal plasticity model for bcc metals and alloys, with necessary modifications made to account for the defect substructure observed in Fe-Cr-Al alloys. The model is implemented in a Visco-Plastic Self Consistent (VPSC) framework, to predict the mechanical behavior under quasi-static loading.

36 MATERIALS SCIENCE↗