SEARCH · Search NASA

Results for “driven”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Integrated Evaporator for Efficient Solar-Driven Interfacial Steam Generation

Solar-driven interfacial steam generation is a promising technique for clean water production as it can minimize thermal loss by localizing solar-to-heat conversion at the air/liquid interface. Here we report an integrated solar-evaporator by partially growing two-dimensional polypyrrole microsheets within a melamine foam through chemical vapor polymerization. These microsheets can induce multiple light reflections within the foam, enable omnidirectional light absorption, provide abundant surfaces to promote heat transfer, and achieve spatially-defined hydrophobicity to facilitate vapor escape. Meanwhile, the inherent hydrophilicity of the bottom part of the foam promotes spontaneous upward water transport and suppresses heat loss. The composite foam exhibits an excellent apparent evaporation rate of ~2 kg/(m 2 ·h) and solar-to-vapor efficiency of ~91%. Here, the combined advantages of large surface area, high efficiency, low cost, all weather application, excellent durability, and scalable manufacturing make our integrated design promising for fabricating large-scale solar steam generation systems that are suitable for practical clean water production.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electric-Field-Driven Localization of Molecular Nanowires in Wafer-Scale Nanogap Electrodes

As integrated circuits continue to scale toward the atomic limit, bottom-up processes, such as epitaxial growth, have come to feature prominently in their fabrication. At the same time, chemistry has developed highly tunable molecular semiconductors that can perform the functions of ultimately scaled circuit components. Hybrid techniques that integrate programmable structures comprising molecular components into devices however are sorely lacking. Here we demonstrate a wafer-scale process that directs the localization of a conductive polymer, M w = 20 kg mol –1 polyaniline, from dilute solutions into 50 nm vertical nanogap device architectures using electric-field-driven self-assembly. The resulting metal–polymer–metal junctions were characterized by electron microscopy, Raman spectroscopy and transport measurements demonstrating that our technique is highly selective, assembling conductive polymers only in electrically activated nanogaps. Our results represent a step toward scalable hybrid nanoelectronics that seamlessly integrate established lithographic top-down fabrication with bottom-up synthesized molecular functional circuit components.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Screw-Dislocation-Driven Growth of 2D Perovskite Spiral Microplates

Two-dimensional (2D) organic–inorganic halide perovskites are solution-processable semiconductors that are promising for optoelectronic applications. Understanding crystallization mechanisms to achieve control over nanostructures is important for optimizing desired properties. Here we introduce a versatile strategy to synthesize spiral microplates of diverse 2D perovskites at the air–water interface through screw-dislocation-driven growth. Spirals of 11 2D perovskite compositions (LA) 2 (A) n−1 Pb n X 3n+1 with different spacer (LA) cations, A-cations, halide (X) anions, and n-number can be grown. They typically consist of single- or few-layer perovskite step heights but exhibit stacking complexity when multiple dislocations interact. The spiral microplates exhibit the characteristic optical properties (photoluminescence and second-harmonic generation) of the underlying 2D perovskites. Fluorescence-detected circular dichroism imaging shows that the chirality of the spiral center does not translate to the observed chiroptical properties of the microplate, consistent with the length scale of the chiral distortion. Furthermore, this solution growth of perovskite spirals diversifies the perovskite microstructures for optoelectronics and other applications.

2D halide perovskites↗

DOE OSTI2025

Robust Spin-Moiré-Superlattice-Driven Gap Opening in EuAg 4 Sb 2 under in-Plane Magnetic Field

Moiré superlattices introduce new length and energy scales, enabling discoveries, such as unconventional superconductivity, in 2D systems. This concept has recently been extended to bulk materials with multiple-q spin textures, opening exciting opportunities for spin moiré physics. A notable example is EuAg 4 S b2 , where a spin moiré superlattice (SMS), manifested as a double-q spin modulation, induces a superzone gap opening. In this work, we investigate the tunability of this gap by an in-plane magnetic field in EuAg 4 Sb 2 by using neutron scattering, magnetization, and transport measurements. We reveal a cycloidal ground state and multiple spin-reoriented phases induced by the in-plane field, highlighting the critical role of in-plane components in driving magnetic transitions. Moreover, we demonstrate that a robust gap opening persists in the double-q phase, regardless of in-plane field orientation. Model calculations attribute this robustness to the stability of the SMS under tilted fields. Here, our results establish EuAg 4 Sb 2 as a tunable platform for exploring the spin-texture-driven superzone gap opening in electronic states.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Unraveling Kinetically-Driven Mechanisms of Gold Nanocrystal Shape Transformations Using Graphene Liquid Cell Electron Microscopy

Mechanisms of kinetically driven nanocrystal shape transformations were elucidated by monitoring single particle etching of gold nanocrystals using in situ graphene liquid cell transmission electron microscopy (TEM). By systematically changing the chemical potential of the oxidative etching and then quantifying the facets of the nanocrystals, nonequilibrium processes of atom removal could be deduced. Etching at sufficiently high oxidation potentials, both cube and rhombic dodecahedra (RDD)-shaped gold nanocrystals transform into kinetically stable tetrahexahedra (THH)-shaped particles. Whereas {100}-faceted cubes adopt an { hko }-faceted THH intermediate where h/k depends on chemical potential, {110}-faceted RDD adopt a {210}-faceted THH intermediate regardless of driving force. For cube reactions, Monte Carlo simulations show that removing 6-coordinate edge atoms immediately reveals 7-coordinate interior atoms. The rate at which these 6- and 7-coordinate atoms are etched is sensitive to the chemical potential, resulting in different THH facet structures with varying driving force. Conversely, when RDD are etched to THH, removal of 6-coordinate edge atoms reveals 6-coordinate interior atoms. Thus, changing the driving force for oxidation does not change the probability of edge atom versus interior atom removal, leading to a negligible effect on the kinetically stabilized intermediate shape. These fundamental insights, facilitated by single-particle liquid-phase TEM imaging, provide important atomic-scale mechanistic details regarding the role of kinetics and chemical driving force in dictating shape transformations at the nanometer length scale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Moisture-Driven Formation and Growth of Quasi-2-D Organolead Halide Perovskite Crystallites

Ruddlesden–Popper phase quasi-2-D organolead halide perovskites like n-butylammonium methylammonium lead iodide (nBA-MAPI) exhibit improved moisture stability over typical 3-D perovskite materials, making them exciting for use in a variety of applications such as photovoltaic (PV) devices. This improved stability is the result of a unique disproportionation-based degradation mechanism that protects the bulk of the nBA-MAPI from extensive damage through the formation of a protective, low-n surface layer. In addition to this surface layer, nBA-MAPI films also exhibit the dynamic growth of micrometer-scale crystallites and cracks at the surface of the film, unique and potentially important byproducts of quasi-2-D perovskite disproportionation. Here, we present a detailed study of these crystallites using several analytical techniques including photoluminescence spectroscopy (PL), confocal fluorescence microscopy (CFM), atomic force microscopy (AFM) combined with time-of-flight-secondary ion mass spectrometry (ToF-SIMS), and others in an effort to better understand the relationship between material disproportionation and crystallite growth. Our results show that the crystallites form after exposure to humid air and confirm that they are composed of low-n phases of nBA-MAPI. The crystallites are found to extend into the interior of the film and exhibit continued growth while exposed to moisture over 72 h. This growth is accompanied by both a decrease in the bulk 2-D phase and an increase in a 3-D-like phase in the surface PL spectra, indicating that the crystallites are likely a product of moisture-driven disproportionation. Importantly, similar crystallites are also observed to form within model PV devices, indicating that such processes must be accounted for when designing future devices containing materials like nBA-MAPI.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Large Destabilization of (TiVNb)-Based Hydrides via (Al, Mo) Addition: Insights from Experiments and Data-Driven Models

High-entropy alloys (HEAs) represent an interesting alloying strategy that can yield exceptional performance properties needed across a variety of technology applications, including hydrogen storage. Examples include ultrahigh volumetric capacity materials (BCC alloys → FCC dihydrides) with improved thermodynamics relative to conventional high-capacity metal hydrides (like MgH 2 ), but still further destabilization is needed to reduce operating temperature and increase system-level capacity. Here, in this work, we demonstrate efficient hydride destabilization strategies by synthesizing two new Al 0.05 (TiVNb) 0.95–x Mo x (x = 0.05, 0.10) compositions. We specifically evaluate the effect of molybdenum (Mo) addition on the phase structure, microstructure, hydrogen absorption, and desorption properties. Both alloys crystallize in a bcc structure with decreasing lattice parameters as the Mo content increases. The alloys can rapidly absorb hydrogen at 25 °C with capacities of 1.78 H/M (2.79 wt %) and 1.79 H/M (2.75 wt %) with increasing Mo content. Pressure-composition isotherms suggest a two-step reaction for hydrogen absorption to a final fcc dihydride phase. The experiments demonstrate that increasing Mo content results in a significant hydride destabilization, which is consistent with predictions from a gradient boosting tree data-driven model for metal hydride thermodynamics. Furthermore, improved desorption properties with increasing Mo content and reversibility were observed by in situ synchrotron X-ray diffraction, in situ neutron diffraction, and thermal desorption spectroscopy.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Drying Temperature and Capillarity-Driven Crack Formation in Aqueous Processing of Li-Ion Battery Electrodes

Unlike conventional electrode processing for Li-ion batteries, which uses the expensive and highly toxic organic N -methyl-2-pyrrolidone (NMP) solvent, aqueous processing simply employs deionized water as the solvent. Yet, thick aqueous processed cathodes have been found to crack during drying. Here, the influence of electrode drying temperature and thickness on cracking was investigated. LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes prepared with a hydrophilic binder, modified styrene–butadiene rubber (SBR), were coated at various thicknesses and dried at temperatures ranging from 20 to 70 °C. Experiments revealed cracking worsens with increased electrode thickness and elevated drying temperatures. Cracks were formed during the capillarity-driven phase during drying. Strong evaporation and weak diffusion played a critical role in the nonuniform distribution of the inactive phase. Images of electrode surfaces were processed to quantify crack dimensions and crack intensity factor (CIF). The average crack length and width, as well as CIF, increased with drying temperature and electrode thickness. Electrochemical performance revealed a strong and negative correlation between the crack density and performance in terms of specific capacity. Transport limitations associated with the presence of cracks adversely affect the advantage of high volume ratio of active materials in the thick electrodes.

25 ENERGY STORAGE↗

DOE OSTI2020

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co2+ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co2+]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Understanding the Stability of Etched or Platinized p-GaInP Photocathodes for Solar-Driven H 2 Evolution

The long-term stability in acidic or alkaline aqueous electrolytes of p-Ga 0.52 In 0.48 P photocathodes, with a band gap of ~1.8 eV, for the solar-driven hydrogen-evolution reaction (HER) has been evaluated from a thermodynamic, kinetic, and mechanistic perspective. At either pH 0 or pH 14, etched p-GaInP electrodes corroded cathodically under illumination and formed metallic In 0 on the photoelectrode surface. In contrast, under the same conditions, electrodeposition of Pt facilitated the HER kinetics and stabilized p-GaInP/Pt photoelectrodes against such cathodic decomposition. When held at 0 V versus the reversible hydrogen electrode, p-GaInP/Pt electrodes in either pH = 0 or pH = 14 exhibited stable current densities (J) of ~-9 mA cm -2 for hundreds of hours under simulated 1 sun illumination. During the stability tests, the current density-potential (J-E) characteristics of the p-GaInP/Pt photoelectrodes degraded due to pH-dependent changes in the surface chemistry of the photocathode. This work provides a fundamental understanding of the stability and corrosion mechanisms of p-GaInP photocathodes that constitute a promising top light absorber for tandem solar-fuel generators.

14 SOLAR ENERGY↗

DOE OSTI2023

Cation-Driven Assembly of Bilayered Vanadium Oxide and Graphene Oxide Nanoflakes to Form Two-Dimensional Heterostructure Electrodes for Li-Ion Batteries

Lithium preintercalated bilayered vanadium oxide (LVO or δ-Li x V 2 O 5 ·nH 2 O) and graphene oxide (GO) nanoflakes were assembled using a concentrated lithium chloride solution and annealed under vacuum at 200 °C to form two-dimensional (2D) δ-Li x V 2 O 5 ·nH 2 O and reduced GO (rGO) heterostructures. Here we found that the Li + ions from LiCl enhanced the oxide/carbon heterointerface formation and served as stabilizing ions to improve structural and electrochemical stability. The graphitic content of the heterostructure could be easily controlled by changing the initial GO concentration prior to assembly. We found that increasing the GO content in our heterostructure composition helped inhibit the electrochemical degradation of LVO during cycling and improved the rate capability of the heterostructure. A combination of scanning electron microscopy and X-ray diffraction was used to help confirm that a 2D heterointerface formed between LVO and GO, and the final phase composition was determined using energy-dispersive X-ray spectroscopy and thermogravimetric analysis. Scanning transmission electron microscopy and electron energy-loss spectroscopy were additionally used to examine the heterostructures at high resolution, mapping the orientations of rGO and LVO layers and locally imaging their interlayer spacings. Further, electrochemical cycling of the cation-assembled LVO/rGO heterostructures in Li-ion cells with a non-aqueous electrolyte revealed that increasing the rGO content led to improved cycling stability and rate performance, despite slightly decreased charge storage capacity. The heterostructures with 0, 10, 20, and 35 wt % rGO exhibited capacities of 237, 216, 174, and 150 mAh g –1 , respectively. Moreover, the LVO/rGO-35 wt % and LVO/rGO-20 wt % heterostructures retained 75% (110 mAh g–1) and 67% (120 mAh g –1 ) of their initial capacities after increasing the specific current from 20 to 200 mA g –1 , while the LVO/rGO-10 wt % sample retained only 48% (107 mAh g –1 ) of its initial capacity under the same cycling conditions. In addition, the cation-assembled LVO/rGO electrodes exhibited enhanced electrochemical stability compared to electrodes prepared through physical mixing of LVO and GO nanoflakes in the same ratios as the heterostructure electrodes, further revealing the stabilizing effect of a 2D heterointerface. The cation-driven assembly approach, explored in this work using Li + cations, was found to induce and stabilize the formation of stacked 2D layers of rGO and exfoliated LVO. The reported assembly methodology can be applied for a variety of systems utilizing 2D materials with complementary properties for applications as electrodes in energy storage devices.

25 ENERGY STORAGE↗

DOE OSTI2024

Mechanisms of Hysteresis and Reversibility across the Voltage-Driven Perovskite–Brownmillerite Transformation in Electrolyte-Gated Ultrathin La 0.5 Sr 0.5 CoO 3−δ

Perovskite cobaltites have emerged as archetypes for electrochemical control of materials properties in electrolyte-gate devices. Voltage-driven redox cycling can be performed between fully oxygenated perovskite and oxygen-vacancy-ordered brownmillerite phases, enabling exceptional modulation of the crystal structure, electronic transport, thermal transport, magnetism, and optical properties. The vast majority of studies, however, have focused heavily on the perovskite and brownmillerite end points. In contrast, here we focus on hysteresis and reversibility across the entire perovskite ↔ brownmillerite topotactic transformation, combining gate-voltage hysteresis loops, minor hysteresis loops, quantitative operando synchrotron X-ray diffraction, and temperature-dependent (magneto)transport, on ion-gel-gated ultrathin (10-unit-cell) epitaxial La 0.5 Sr 0.5 CoO 3-δ films. Further, gate-voltage hysteresis loops combined with operando diffraction reveal a wealth of new mechanistic findings, including asymmetric redox kinetics due to differing oxygen diffusivities in the two phases, nonmonotonic transformation rates due to the first-order nature of the transformation, and limits on reversibility due to first-cycle structural degradation. Minor loops additionally enable the first rational design of an optimal gate-voltage cycle. Combining this knowledge, we demonstrate state-of-the-art nonvolatile cycling of electronic and magnetic properties, encompassing >10 5 transport ON/OFF ratios at room temperature, and reversible metal-insulator-metal and ferromagnet-nonferromagnet-ferromagnet cycling, all at 10-unit-cell thickness with high room-temperature stability. This paves the way for future work to establish the ultimate cycling frequency and endurance of such devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Electro-chemo-mechanically Driven Ni Exsolution from (Pr,Ce,Ni)O 2−δ : Controlled Nucleation Density and Enhanced Electrode Kinetics

In situ exsolution of metal nanoparticles is a promising strategy to prepare electrocatalysts with enhanced activity and resistance to agglomeration for efficient chemical transformations and energy conversion. Achieving a high nucleation density of nanoparticles under mild conditions and understanding how to tailor the process is important for performance of these electrodes in electrochemical cells. In this work, we demonstrate facile exsolution of Ni nanoparticles using fluorite-structured (Pr,Ce)O 2−δ as the support oxide, driven by electrochemical potential and aided by the metastability of Ni in the solid solution (elastic driving force). We prepare single-phase oriented thin films of (Pr,Ce,Ni)O 2−δ (NPCO) on (Zr,Y)O 2−δ (YSZ) substrates by pulsed laser deposition. With the aid of a high-throughput electrochemical cell that provides a lateral gradient in Nernst voltage, we apply in situ near-ambient pressure synchrotron X-ray photoelectron spectroscopy and ex situ atomic force microscopy to investigate the impact of electrochemical potential on Ni nucleation density. We find that metallic Ni can be successfully exsolved at 550 °C upon cathodic biasing in 20 mTorr O 2 , and its nucleation density increases with increasing electrochemical driving force/decreasing oxygen chemical potential. We further evaluate the electrochemical performance under highly reducing (fuel electrode) conditions by electrochemical impedance spectroscopy. With the exsolved Ni nanoparticles, the surface exchange coefficient of the NPCO is found to be ∼4× higher than for PCO without exsolution. This work confirms mixed conducting fluorites as beneficial host lattices for facile transition-metal exsolution and suggests the possibility for constructing an all ceria-based electrochemical cell with PCO serving as both the cathode and the anode.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Interface engineering of colloidal CdSe quantum dots thin films as acid-stable photocathodes for solar-driven hydrogen evolution

Colloidal semiconductor quantum dots-based (CQD) photocathodes for solar-driven hydrogen evolution have attracted significant attention due to their tunable size, nanostructured morphology, crystalline orientation, and band-gap. Here, we report a thin film heterojunction photocathode composed of organic PEDOT:PSS as a hole transport layer, CdSe CQDs as a semiconductor light absorber, and conformal Pt layer deposited by atomic layer deposition (ALD) serving as both a passivation layer and cocatalyst for hydrogen evolution. In neutral aqueous solution, a PEDOT:PSS/CdSe/Pt heterogeneous photocathode with 200 cycles of ALD Pt produces a photocurrent density of -1.08 mA/cm 2 (AM1.5G, 100 mW/cm 2 ) at a potential of 0 V vs. RHE (j 0 ) in neutral aqueous solution, which is nearly 12 times that of the pristine CdSe photocathode. This composite photocathode shows an onset potential for water reduction at +0.46 V vs. RHE and long-term stability with negligible degradation. In acidic electrolyte (pH = 1), where the hydrogen evolution reaction is more favorable but stability is limited due to photocorrosion, a thicker Pt film (300 cycles) is shown to greatly improve the device stability and a j 0 of -2.14 mA/cm 2 is obtained with only 8.3% activity degradation after 6 h, compared to 80% degradation under the same conditions when the less conformal electrodeposition method is used to deposit the Pt layer. Electrochemical impedance spectroscopy and time-resolved photoluminescence results indicate that these enhancements stem from a lower bulk charge recombination rate, higher interfacial charge transfer rate, and faster reaction kinetics. In conclusion, we believe that these interface engineering strategies can be extended to other colloidal semiconductors to construct more efficient and stable heterogeneous photoelectrodes for solar fuel production.

42 ENGINEERING↗

DOE OSTI2019

Sono-Assisted Surface Energy Driven Assembly of 2D Materials on Flexible Polymer Substrates: A Green Assembly Method Using Water

The challenges in achieving a green and scalable integration of two-dimensional (2D) materials with flexible polymer substrates present a major barrier for the application of 2D materials, such as graphene, MoS2, and h-BN for flexible devices. Here, we create a sono-assisted surface energy driven assembly (SASEDA) method that can achieve foot-scale to micrometer-scale assembly of 2D materials, form a conductive network in as short as 10 s, and build hierarchical and hybrid flexible devices such as sensors, resistors, and capacitors by using water as the dispersion solvent. SASEDA highlights two counterintuitive innovations. First, we use an 'unfavorable' solvent (i.e., water) for both 2D materials (e.g., graphene, MoS2, and h-BN) and polymer substrates (e.g., polydimethylsiloxane) to drive the assembly process. Second, we use a weak sono-field (0.3 W/cm2) generated by a regular sonication bath cleaner to enhance the assembly efficiency and reorganize and unify the assembly network. This method and its principle pave the way toward affordable large-scale 2D material-based flexible devices.

2D material↗

DOE OSTI2022

High Throughput Data-Driven Design of Laser-Crystallized 2D MoS 2 Chemical Sensors: A Demonstration for NO 2 Detection

High throughput characterization and processing techniques are becoming increasingly necessary to navigate multivariable, data-driven design challenges for sensors and electronic devices. For two-dimensional materials, device performance is highly dependent upon a vast array of material properties including the number of layers, lattice strain, carrier concentration, defect density, and grain structure. In this work, laser crystallization was used to locally pattern and transform hundreds of regions of amorphous MoS 2 thin films into 2D 2H-MoS 2 . Here a high throughput Raman spectroscopy approach was subsequently used to assess the process-dependent structural and compositional variations for each illuminated region, yielding over 6000 distinct nonresonant, resonant, and polarized Raman spectra. The rapid generation of a comprehensive library of structural and compositional data elucidated important trends between structure–property processing relationships involving laser-crystallized MoS 2 , including the relationships between grain size, grain orientation, and intrinsic strain. Moreover, extensive analysis of structure/property relationships allowed for intelligent design and evaluation of major contributions to device performance in MoS 2 chemical sensors. In particular, it is found that NO 2 sensor performance is strongly dependent on the orientation of the MoS 2 grains relative to the crystal plane.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Plasmon-Driven Ammonia Decomposition on Pd(111): Hole Transfer’s Role in Changing Rate-Limiting Steps

Here, ammonia (NH 3 ) has the potential to be a hydrogen carrier because it can be transported and stored with ease, but only if it also can be decomposed easily when needed. Understanding how to control the frequently rate-limiting N–H bond breaking and N–N bond forming on catalytic surfaces may help design efficient means for NH 3 decomposition. Yuan et al. recently demonstrated photocatalytically selective N–H bond breaking in NH 3 on plasmon-driven aluminum–palladium (Al–Pd) antenna–reactor heterostructures. Using embedded correlated wavefunction (ECW) theory, we predict that the rate-determining step (RDS) for NH 3 decomposition on Pd(111) via thermocatalysis (dissociating the first N–H bond, *NH 3 → *NH 2 + *H, in the ground state, where * means adsorbed) differs from that via photocatalysis (dissociating the second N–H bond, *NH 2 → *NH + *H, in the excited state). This result is consistent with the measured catalytic efficiency and selectivity of NH 3 -deuterium (D 2 ) exchange reactions (an indirect way to measure N–H bond breaking) on Al–Pd heterodimers. We also determine the origin of the observed selectivity of thermocatalysis and photocatalysis on Pd(111) toward doubly deuterated (NHD 2 ) and monodeuterated (NH 2 D) products, respectively, and explore viability of the full NH 3 decomposition path, also via ECW theory. Additionally, we predict that the associative desorption of *N as N 2 from Pd(111) is extremely difficult in thermocatalysis at least at low surface coverages; metal-to-adsorbate hole transfer in photocatalysis stabilizes the transition state for the first N–H bond dissociation, shifting the RDS to the second N–H bond breaking. Furthermore, the redistribution of electrons around *N upon excitation reduces the electron density in the Pd–N bonds, which may lower the barrier for N 2 associative desorption in photocatalysis. Thus, light-induced, plasmon-mediated, excited-state hole transfer may provide an efficient mechanism to accelerate NH 3 decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

High-Redox-Potential Chromophores for Visible-Light-Driven Water Oxidation at Low pH

Photochemical water oxidation at low pH requires chromophores with adequate photophysical properties and high redox potentials capable of oxidizing the catalysts. We report here a series of homoleptic Ru(II) polypyridyl complexes and their performances in photochemical water oxidation at pH 1 using persulfate as the sacrificial electron acceptor. These chromophores incorporate CF 3 or PO 3 H 2 groups to increase the RuIII/II standard potentials to 1.3–1.6 V versus NHE, while their homoleptic nature retains photophysical properties (absorption spectra, lifetimes, emission energies, emission quantum yields) comparable to [Ru(bpy) 3 ] 2+ . With [(bda)Ru(isq) 2 ] as the catalyst, the chromophores promote visible-light-driven water oxidation with high activity at low pH. The chromophores with phosphonate groups as substituents showed higher activity than expected based on driving force arguments. In addition, kinetic isotope effects as high as ~3 were measured, suggesting the involvement of concerted proton-coupled transfer pathways between the catalyst and the chromophores with the phosphonate group acting as the proton acceptor. These chromophores therefore carry out the light absorption, charge migration, and proton transfer roles of P 680 , Tyr161, and His190 in Photosystem II on a single molecule and are good candidates for photoelectrochemical water oxidation at low pH in dye-sensitized photoelectrochemical cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗