Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Complexity and Challenges of Irradiation-Induced Phase Instability Phenomenon in Nuclear Power Plant Components

High energy irradiation by neutrons or ions of metastable austenitic 300-series steels appears to initiate formation of bcc-phases with different morphology and elemental composition compared to that of retained ferrite. Extensive formation of specific Fe-rich ferrite was observed on the grain boundaries of annealed Russian steel 12Cr18Ni10Ti, an analog of AISI 321, after irradiation in the center-core region of sodium-cooled BN-350 fast reactor (SFR) doses up to 57 dpa at ~1×10-6dpa/sec. The ferrite fraction determined from scanning electron microscopy (SEM) closely matched the magnetic fraction determined using a ferritscope confirmed by X-ray diffraction analysis and selected area diffraction patterns. Chemical composition of the secondary phases was determined by energy dispersive X-ray analysis using transmission electron microscope, showing Fe-rich ferrite domains. Fe-ion irradiation (2.3 MeV) was used to study the accumulation of ferrite and martensite phases at higher dpa rates. The very high etchability of these ferrite particles in alcohol-based solutions may signal a very high etching in hot water, leading to accelerated intergranular cracking, especially upon long-term exposure during extended plant lifetimes.

D a, Merezhko↗
DOE OSTI2016

Computational algorithms for analysis of data from thin-film thermoresistors on a radio-electronic printed circuit board

In the paper, the data analysis is considered for thin-film thermoresistors coated on to a radio-electronic printed circuit board to determine possible zones of its overheating. A mathematical model consists in an underdetermined system of linear algebraic equations with an infinite set of solutions. For computing a more real solution, two additional conditions are used: the smoothness of a solution and the positiveness of an increase of temperature during overheating. Computational experiments demonstrate that an overheating zone is determined exactly with a tolerable accuracy of temperature in it.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Chemical synthesis and characterization of PdTe-Ag{sub 2}Te nanowires heterostructure

Ag{sub 2}Te and Pd doped Ag{sub 2}Te nanowires are synthesized using chemical route. Field Emission Scanning Electron Microscopy (FESEM) shows the presence of nanowires of nearly few micron length and ~ 200 nm diameter. The composition analysis performed using Electron Dispersive Spectroscopy (EDS) shows the presence of almost 1.98 at% palladium. Reitveld refinement of X-ray diffraction (XRD) shows the presence of 0.3 % of PdTe phase in addition to Ag{sub 2}Te in Pd doped Ag{sub 2}Te sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Observation of halogen-like behavior of gold in fluorinated bimetallic CoAuF 1-2 − and CuAuF 1-2 − clusters: Anion photoelectron spectroscopy and density functional theory

Using size-selected anion photoelectron spectroscopy and density functional theory, we investigated the structures and properties of fluorinated bimetallic clusters CoAuF 1-2 − and CuAuF 1-2 − and their neutrals. Both experimental and theoretical results show that in these cluster anions, Au behaves like a halogen atom. For example, the measured vertical detachment energies (VDEs) of CoAuF − (2.00 ± 0.08 eV) and CuAuF − (3.8 ± 0.1 eV) are close to those of CoF 2 − (2.12 ± 0.08 eV) and CuF 2 − (3.58 ± 0.08 eV), respectively. The theoretical results show that the geometries and electronic structures of CoAuF − and CuAuF − are similar to those of CoF 2 − and CuF 2 − . The natural population analysis and natural electron configuration analyses further confirm that the electronic properties of Au in MAuF − (M = Co, Cu) mimic those of MF 2 − . In addition, the electron localization function analyses show that the M-Au chemical bonds are similar to the corresponding M-F chemical bonds, providing evidence for the ionic nature of the interactions. When a second F atom is attached to the CoAuF − and CuAuF − clusters, the VDEs of the resulting CoAuF 2 − and CuAuF 2 − are 4.38 ± 0.08 eV and 3.71 ± 0.08 eV, respectively, indicating their superhalogen character as these values are higher than those of halogen anions. The results may be useful for understanding the properties of gold at the nanoscale that play an important role in catalysis and nanotechnology.

Ab-initio methods↗
DOE OSTI2019

Practical Challenges and Failure Modes During Fabrication of Haynes 230 Micro-Pin Solar Receivers for High Temperature Supercritical Carbon Dioxide Operation

Printed circuit heat exchangers (PCHX) fabricated from high nickel alloys have shown promise as primary heat exchangers, recuperators, and solar receivers for high temperature and pressure supercritical carbon dioxide power cycles. There are numerous challenges in fabricating these devices including forming channel features, joining via diffusion or transient liquid phase bonding, and brazing/welding of headers. Commercial entities are understandably hesitant to share propriety best practices, and both commercial and non-commercial entities working on these components tend not to publically share failures and mistakes. However, sharing of this information could prevent similar costly errors and further the understanding of the coupled manufacturing, materials and mechanics issues in creating these components. Thus, in this paper, we document the challenges, failures, and mitigation methods uncovered in fabrication of prototype micro-pin based solar thermal receivers constructed of Haynes 230 and fabricated through a combination of photochemical machining (PCM), wire electrical discharge machining (EDM), transient liquid phase (TLP) bonding, vacuum brazing, and gas tungsten arc welding (GTAW). The receiver is designed to absorb concentrated solar fluxes greater than 140 W cm-2, while heating supercritical carbon dioxide from 550 °C to 720 °C at a pressure of 20 MPa to 25 MPa. The prototype receiver consists of a thin (~ 450 µm), Haynes 230 coversheet bonded to a 15 cm × 15 cm Haynes 230 micro-pin plate. The pieces are joined using a TLP bonding process with a nickel-phosphorus interlayer. Prior to bonding, micro-pins with height ~150 µm and diameter 300 µm are fabricated using PCM in the plate, and through slot features are made using wire EDM. Finally, flow headers are joined to the microchannel plate through a combination of vacuum brazing and GTAW. During hydrostatic proof testing, the prototype device failed when the coversheet delaminated from the pin array at a pressure of 290 bar. A failure analysis including scanning electron microscopy (SEM) to view failure sites and energy-dispersive X-ray spectroscopy (EDS) to evaluate elemental analysis of the failed areas was conducted. The failure modes can be broadly categorized as (1) failures potentially relating to reliquification of the transient liquid phase bonds between the micro-pins plate and coversheet during post-processing, (2) failures related to manufacturing defects, and (3) failures attributed to design.

14 SOLAR ENERGY↗
NASA NTRS1977

Apparatus for measuring the force of gravity on freely falling electrons

An apparatus and data analysis technique for measuring the gravitational force on freely falling electrons are described. The measurement required that all forces acting on the electrons be uniform and measurable to about ten to the negative 11th power eV/m. The electrical force along the axis of the 5-cm-diam, vertical copper tube used in the experiment was found to be about six times ten to the negative 11th power eV/m when the tube was cooled to 4.2 K. Forces on electrons due to magnetic field gradients were reduced well below the electrical ones by selecting only ground state electrons for measurement. The absence, at 4.2 K, of much stronger electric fields, which were expected to arise from the patch effect and from differential lattice components, contrasts strongly with measurements of electric fields near metal surfaces made at room temperature.

Witteborn, F. C.↗
DOE OSTI2024

Angular analysis of B → K * e + e − in the low- q 2 region with new electron identification at Belle

We perform an angular analysis of the B → K * e + e − decay for the dielectron mass squared, q 2 , range of 0.0008 – 1.1200 GeV 2 / c 4 using the full Belle dataset in the K * 0 → K + π − and K * + → K S 0 π + channels, incorporating new methods of electron identification to improve the statistical power of the dataset. This analysis is sensitive to contributions from right-handed currents from physics beyond the Standard Model by constraining the Wilson coefficients C 7 ( ′ ) . We perform a fit to the B → K * e + e − differential decay rate and measure the imaginary component of the transversality amplitude to be A T Im = − 1.27 ± 0.52 ± 0.12 , and the K * transverse asymmetry to be A T ( 2 ) = 0.52 ± 0.53 ± 0.11 , with F L and A T Re fixed to the Standard Model values. The resulting constraints on the value of C 7 ′ are consistent with the Standard Model within a 2 σ confidence interval. Published by the American Physical Society 2024

Ferlewicz, D. (ORCID:0000000243741234)↗
NASA NTRS2012

Miniature Variable Pressure Scanning Electron Microscope for In-Situ Imaging and Chemical Analysis

NASA Marshall Space Flight Center (MSFC) is leading an effort to develop a Miniaturized Variable Pressure Scanning Electron Microscope (MVP-SEM) for in-situ imaging and chemical analysis of uncoated samples. This instrument development will be geared towards operation on Mars and builds on a previous MSFC design of a mini-SEM for the moon (funded through the NASA Planetary Instrument Definition and Development Program). Because Mars has a dramatically different environment than the moon, modifications to the MSFC lunar mini-SEM are necessary. Mainly, the higher atmospheric pressure calls for the use of an electron gun that can operate at High Vacuum, rather than Ultra-High Vacuum. The presence of a CO2-rich atmosphere also allows for the incorporation of a variable pressure system that enables the in-situ analysis of nonconductive geological specimens. Preliminary testing of Mars meteorites in a commercial Environmental SEM(Tradmark) (FEI) confirms the usefulness of lowcurrent/low-accelerating voltage imaging and highlights the advantages of using the Mars atmosphere for environmental imaging. The unique capabilities of the MVP-SEM make it an ideal tool for pursuing key scientific goals of NASA's Flagship Mission Max-C; to perform in-situ science and collect and cache samples in preparation for sample return from Mars.

Gaskin, Jessica A.↗
NASA NTRS1973

Electrostatic Propulsion Beam Divergence Effects on Spacecraft Surfaces. Volume 2, Addendum 1: Ion Time-of-flight Determinations of Doubly to Singly Ionized Mercury Ion Ratios from a Mercury Electron Bombardment Discharge

The analysis of ion exhaust beam current flow for multiply charged ion species and the application to propellant utilization for the thruster are discussed. The ion engine in use in the experiments is a twenty centimeter diameter electromagnet electron bombardment engine. The experimental technique to determine the multiply charged ion abundance ratios using ion time of flight is described. An analytical treatment of the discharge action in producing various ion species has been carried out.

Sellen, J. M., Jr.↗
DOE OSTI2016

Degradation and corresponding failure mechanism for GaN-based LEDs

The degradation behaviors of high power GaN-based vertical blue LEDs on Si substrates were measured using in-situ accelerated life test. The results show that the dominant failure mechanism would be different during the operation. Besides that, the corresponding associated failure mechanisms were investigated systematically by using different analysis technologies, such as Scan Electron Microscopy, Reflectivity spectroscopy, Transient Thermal Analysis, Raman Spectra, etc. It is shown that initially, the failure modes were mainly originated from the semiconductor die and interconnect, while afterwards, the following serious deterioration of the radiant fluxes was attributed to the package. The interface material and quality, such as die attach and frame, play an important role in determining the thermal performance and reliability. In addition, the heating effect during the operation will also release the compressive strain in the chip. These findings will help to improve the reliability of GaN-based LEDs, especially for the LEDs with vertical structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties

Highlights: • The combined curing can significantly enhance the resistance of UHPC to explosive spalling under high temperature. • The combined curing can improve the mechanical properties of UHPC remarkably. • Both further hydration of residual cement and pozzolanic reaction are activated under a high temperature steam condition. - Abstract: The influence of a combined curing composed of precuring in hot water and heating in dry air on mechanical properties and explosive spalling of ultra-high performance concrete (UHPC) subjected to high temperature was investigated in this experiment. Meanwhile, the microstructure of UHPC was determined by means of X-ray diffraction (XRD) with Rietveld method, thermogravimetric analysis (TGA), scanning electron microscope (SEM) and mercury intrusion porosimetry (MIP). The results indicate that the combined curing improves the mechanical properties of UHPC remarkably. More importantly, it is quite efficient to enhance the resistance of UHPC to explosive spalling under high temperature, which should be a novel approach to prohibit spalling occurrence, different from adding polypropylene fiber. During dry air heating in the combined curing, a high temperature steam environment is established in the dense structure framework of UHPC formed in the preceding hot water curing. Both further hydration of residual cement and pozzolanic reaction of mineral admixtures can be activated during the dry air heating, leading to not only the formation of a large amount of dense hydrates (such as C-S-H gels, katoite, tobermorite and xonotlite, etc.), which accumulate in the aforementioned existing framework, but also the consumption of most of internal free water. Therefore, both mechanical properties of UHPC and its resistance to explosive spalling under high temperature can be enhanced significantly.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mapping the structural, magnetic and electronic behavior of (Eu 1-x Ca x ) 2 Ir 2 O 7 across a metal-insulator transition

In this study, we employ bulk electronic properties characterization and x-ray scattering/spectroscopy techniques to map the structural, magnetic and electronic properties of (Eu 1-x Ca x ) 2 Ir 2 O 7 as a function of Ca-doping. As expected, the metal-insulator transition temperature, T-MIT, decreases with Ca-doping until a metallic state is realized down to 2 K. In contrast, T-AFM becomes decoupled from the MIT and (likely short-range) AFM order persists into the metallic regime. This decoupling is understood as a result of the onset of an electronically phase separated state, the occurrence of which seemingly depends on both synthesis method and rare earth site magnetism. PDF analysis suggests that electronic phase separation occurs without accompanying chemical phase segregation or changes in the short-range crystallographic symmetry while synchrotron x-ray diffraction confirms that there is no change in the long-range crystallographic symmetry. X-ray absorption measurements confirm the $J_{eff}$ = 1/2 character of (Eu 1-x Ca x ) 2 Ir 2 O 7 . Surprisingly these measurements also indicate a net electron doping, rather than the expected hole doping, indicating a compensatory mechanism. Lastly, XMCD measurements show a weak Ir magnetic polarization that is largely unaffected by Ca-doping. Keywords: term, term, term.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Detecting Energy Modulation in a Dielectric Laser Accelerator

The Dielectric Laser Acceleration group at SLAC uses micro-fabricated dielectric grating structures and conventional infrared lasers to accelerator electrons. These structures have been estimated to produce an accelerating gradient up to 2 orders of magnitude greater than that produced by conventional RF accelerators. The success of the experiment depends on both the laser damage threshold of the structure and the timing overlap of femtosecond duration laser pulses with the electron bunch. In recent dielectric laser acceleration experiments, the laser pulse was shorter both temporally and spatially than the electron bunch. As a result, the laser is theorized to have interacted with only a small portion of the electron bunch. The detection of this phenomenon, referred to as partial population modulation, required a new approach to the data analysis of the electron energy spectra. A fitting function was designed to separate the accelerated electron population from the un-accelerated electron population. The approach was unsuccessful in detecting acceleration in the partial population modulation data. However, the fitting functions provide an excellent figure of merit for previous data known to contain signatures of acceleration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Detecting Partial Energy Modulation in a Dielectric Laser Accelerator - Oral Presentation [Slides]

The Dielectric Laser Acceleration group at SLAC uses micro-fabricated dielectric grating structures and conventional infrared lasers to accelerator electrons. These structures have been estimated to produce an accelerating gradient up to 2 orders of magnitude greater than that produced by conventional RF accelerators. The success of the experiment depends on both the laser damage threshold of the structure and the timing overlap of femtosecond duration laser pulses with the electron bunch. In recent dielectric laser acceleration experiments, the laser pulse was shorter both temporally and spatially than the electron bunch. As a result, the laser is theorized to have interacted with only a small portion of the electron bunch. The detection of this phenomenon, referred to as partial population modulation, required a new approach to the data analysis of the electron energy spectra. A fitting function was designed to separate the accelerated electron population from the unaccelerated electron population. The approach was unsuccessful in detecting acceleration in the partial population modulation data. However, the fitting functions provide an excellent figure of merit for previous data known to contain signatures of acceleration.

43 PARTICLE ACCELERATORS↗
NASA NTRS2003

Identification of Presolar Spinel Grains from a Murray Residue by Multi-Detection Raster Imaging

Grain size separate CG from the Murray CM2 carbonaceous chondrite contains mostly spinel grains of average diameter 0.5 m. Zinner et al. found that approximately 1% of these spinel grains are of presolar origin as determined by their large O isotopic anomalies. These O isotopic measurements were made with the NanoSIMS on individual grains that were well separated from one another on a gold foil. The grains were selected for analysis from secondary electron and secondary O-16(-) images. The primary beam was then successively deflected onto these single grains for O isotopic analysis. While single grain analysis on dispersed samples is effective for finding relatively abundant anomalous grains, ion imaging in a raster mode on tightly packed grains might be more efficient for locating few anomalous grains among predominantly isotopically normal grains. In fact, this was the analysis mode used by Messenger et al. to discover presolar silicates in interplanetary dust particles. In an exploratory effort that is also geared toward establishing the optimum isotopic imaging technique in the search for presolar silicate grains in primitive meteorites, we measured O isotopic ratios in spinel grains from the Murray CG separate by raster imaging of areas with more or less tightly packed grains.

Nguyen, A.↗
DOE OSTI2020

Single Entity Electrochemistry in Nanopore Electrode Arrays: Ion Transport Meets Electron Transfer in Confined Geometries

Electrochemical measurements conducted in confined volumes provide a powerful and direct means to address scientific questions at the nexus of nanoscience, biotechnology, and chemical analysis. How are electron transfer and ion transport coupled in confined volumes and how does understanding them require moving beyond macroscopic theories? Also, how do these coupled processes impact electrochemical detection and processing? We address these questions by studying a special type of confined-volume architecture, the nanopore electrode array, or NEA, which is designed to be commensurate in size with physical scaling lengths, such as the Debye length, a concordance that offers performance characteristics not available in larger scale structures. The experiments described here depend critically on carefully constructed nanoscale architectures that can usefully control molecular transport and electrochemical reactivity. We begin by considering the experimental constraints that guide the design and fabrication of zero-dimensional nanopore arrays with multiple embedded electrodes. These zero-dimensional structures are nearly ideal for exploring how permselectivity and unscreened ion migration can be combined to amplify signals and improve selectivity by enabling highly efficient redox cycling. Our studies also highlight the benefits of arrays, in that molecules escaping from a single nanopore are efficiently captured by neighboring pores and returned to the population of active redox species being measured, benefits that arise from coupling ion accumulation and migration. These tools for manipulating redox species are well-positioned to explore single molecule and single particle electron transfer events through spectroelectrochemistry, studies which are enabled by the electrochemical zero-mode waveguide (ZMW), a special hybrid nanophotonic/nanoelectronic architecture in which the lower ring electrode of an NEA nanopore functions both as a working electrode to initiate electron transfer reactions and as the optical cladding layer of a ZMW. Furthermore, while the work described here is largely exploratory and fundamental, we believe that the development of NEAs will enable important applications that emerge directly from the unique coupled transport and electron-transfer capabilities of NEAs, including in situ molecular separation and detection with external stimuli, redox-based electrochemical rectification in individually encapsulated nanopores, and coupled sorters and analyzers for nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Kinetic simulation of a 50 mTorr capacitively coupled argon discharge over a range of frequencies and comparison to experiments

The effect of driving frequency in the range of 13.56–73 MHz on electron energy distribution and electron heating modes in a 50 mTorr capacitively coupled argon plasma discharge is studied using 1D-3V particle-in-cell simulations. Calculated electron energy probability functions exhibit three distinct “temperatures” for low-, mid-, and high-energy electrons at all the studied driving frequencies. When compared to published experimental data, the calculated probability functions show a reasonable agreement for the energy range resolved in the measurements (about 2–10 eV). Discrepancies due to limitations in experimental energy resolution outside this range lead to differences between computational and experimental values of the electron number density determined from the distribution functions, and the predicted effective electron temperature is within 25% of experimental values. The impedance of the discharge is interpreted in terms of a homogeneous equivalent circuit model, and the driving frequency dependence of the inferred combined sheath thickness is found to obey a known, theoretically derived, power law. The average power transferred from the field to the electrons (electron heating) is computed, and a region of negative heating near the sheath edge, particularly at higher driving frequencies, is identified. Analysis of the electron momentum equation shows that electron inertia, which on temporal averaging would be zero in a linear regime, is responsible for negative values of power deposition near the sheath edge at high driving frequencies due to the highly nonlinear behavior of the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗