Search NASA⌕ Search

SEARCH · Search NASA

Results for “high loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Conceptual design of front ends for the advanced photon source multi-bend achromats upgrade

The proposed Advanced Photon Source (APS) upgrade from a double-bend achromats (DBA) to multi-bend achromats (MBA) lattice with ring energy change from 7 GeV to 6 GeV and beam current from 100 mA to 200 mA poses new challenges for front ends. All front ends must be upgraded to fulfill the following requirements: 1) handle the high heat load from two insertion devices in either inline or canted configuration, 2) include a clearing magnet in the front end to deflect and dump any electrons in case the electrons escape from the storage ring during swap-out injection with the safety shutters open, 3) incorporate the next generation x-ray beam position monitors (XBPMs) into the front end to meet the new stringent beam stability requirements. This paper presents the evaluation of the existing APS front ends and standardizes the insertion device (ID) front ends into two types: one for the single beam and one for the canted beams. The conceptual design of high heat load front end (HHLFE) and canted undulator front end (CUFE) for APS MBA upgrade is presented.

43 PARTICLE ACCELERATORS↗

Translating Fundamental Insights into Ag-Based Bimetallic Electrocatalysts to Anion-Exchange Membrane Fuel Cells

To address challenges of high costs and scalability for fuel cells, it is essential to develop af-fordable and earth-abundant materials that are Pt-group-metal (PGM)-free. Recent advance-ments in PGM-free electrocatalysis for the oxygen reduction reaction (ORR) in alkaline media show that high catalyst loadings are needed to achieve high reaction rates; however, there are associated mass transport limitations. To address this issue, we develop low-loading ionomer-less Ag-bimetallic thin films by alloying with 3d block elements or Sn. We bridge knowledge from fundamental rotating disk electrode (RDE) studies to gas-diffusion cathodes in high-temperature anion-exchange membrane fuel cells (HT-AEMFCs), resulting in high-activity ORR catalysis and peak power densities up to 1.2 W cm-² geo for the Ag-Sn and Ag-Co alloys. Here, experimental post-characterization and theoretical calculations reveal small Co or Sn oxide nano-islands on Ag as likely active sites enhancing ORR activity, ultimately offering these low-loading PGM-free ORR materials as a viable path towards sustainable energy conversion.

Catalysts↗

Preliminary Benchmark Evaluation of Japan’s High Temperature Engineering Test Reactor

A benchmark model of the initial fully-loaded start-up core critical of Japan’s High Temperature Engineering Test Reactor (HTTR) was developed to provide data in support of ongoing validation efforts of the Very High Temperature Reactor Program using publicly available resources. The HTTR is a 30 MWt test reactor utilizing graphite moderation, helium coolant, and prismatic TRISO fuel. The benchmark was modeled using MCNP5 with various neutron cross-section libraries. An uncertainty evaluation was performed by perturbing the benchmark model and comparing the resultant eigenvalues. The calculated eigenvalues are approximately 2-3% greater than expected with an uncertainty of ±0.70%. The primary sources of uncertainty are the impurities in the core and reflector graphite. The release of additional HTTR data could effectively reduce the benchmark model uncertainties and bias. Sensitivity of the results to the graphite impurity content might imply that further evaluation of the graphite content could significantly improve calculated results. Proper characterization of graphite for future Next Generation Nuclear Power reactor designs will improve computational modeling capabilities. Current benchmarking activities include evaluation of the annular HTTR cores and assessment of the remaining start-up core physics experiments, including reactivity effects, reactivity coefficient, and reaction-rate distribution measurements. Long term benchmarking goals might include analyses of the hot zero-power critical, rise-to-power tests, and other irradiation, safety, and technical evaluations performed with the HTTR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of speed and load on ultra-high-speed ball bearings

A study was undertaken to determine the effects of speed and load on the operation of 120-mm bore angular-contact ball bearings at speeds to 25,000 rpm and thrust loads to 22,240 newtons (5000 lb). Bearing temperature and power consumption increased with increases in load and/or speed. The effect of load on temperature and power consumption was small relative to the speed effect. Actual measurements of bearing operating contact angle were in excellent agreement with theoretical predictions. Skidding occurred in the bearing in various amounts, generally increasing with speed at given load. The highest amount of skidding, 6 percent, occurred at the highest speed, 25,000 rpm. No visible damage to the bearing surfaces occurred due to the skidding.

Bamberger, E. N.↗

Identification of the structure of the Bi promoted Pt non-oxidative coupling of methane catalyst: a nanoscale Pt 3 Bi intermetallic alloy

Recently, stable non-oxidative conversion of methane (NOCM) for up to 8 h with a C 2 selectivity greater than 90% has been reported over Pt–Bi/ZSM-5 at moderate temperatures (600–700 °C). In this study, we demonstrate that the structure of the bimetallic nanoparticles on Pt–Bi/ZSM-5 catalyst is similar to Pt–Bi/SiO 2 . EXAFS indicates the formation of Pt-rich bimetallic Pt–Bi nanoparticles with Pt–Bi bond distance of 2.80 Å. The XRD spectra (on SiO 2 ) are consistent with cubic, intermetallic surface Pt 3 Bi phase on a Pt core. The Pt 3 Bi structure is not known in the thermodynamic phase diagram. In all catalysts, only a small fraction of Bi alloys with Pt. At high Bi loadings, excess Bi reduces at high temperature, covering the catalytic surface leading to a loss in activity. At lower Bi loadings with little excess Bi, the Pt 3 Bi surface is effective for non-oxidative coupling of CH 4 (on ZSM-5) and propane dehydrogenation (on SiO 2 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Dynamic Behavior of Wind Turbines

The structural dynamicist s areas of responsibility require interaction with most other members of the wind turbine project team. These responsibilities are to predict structural loads and deflections that will occur over the lifetime of the machine, ensure favorable dynamic responses through appropriate design and operational procedures, evaluate potential design improvements for their impact on dynamic loads and stability, and correlate load and control test data with design predictions. Load prediction has been a major concern in wind turbine designs to date, and it is perhaps the single most important task faced by the structural dynamics engineer. However, even if we were able to predict all loads perfectly, this in itself would not lead to an economic system. Reduction of dynamic loads, not merely a "design to loads" policy, is required to achieve a cost-effective design. The two processes of load prediction and structural design are highly interactive: loads and deflections must be known before designers and stress analysts can perform structural sizing, which in turn influences the loads through changes in stiffness and mass. Structural design identifies "hot spots" (local areas of high stress) that would benefit most from dynamic load alleviation. Convergence of this cycle leads to a turbine structure that is neither under-designed (which may result in structural failure), nor over-designed (which will lead to excessive weight and cost).

Thresher, Robert W.↗

Long life, high speed, thrust-load ball bearings

Long-term bearing operation at three million DN can be achieved with high degree of reliability using full combination of sophisticated but currently available state-of-the-art bearing materials and designs, lubricants, and lubricating techniques.

Signer, H.↗

Characterizing IHE Response to Multiple Shock Loading

The response of high explosives to shock loading is traditionally measured with a steady loading pressure. In many accident scenarios involving fragment impact, however, a loading duration that is shorter than the build up to detonation may occur. Fragments passing through multiple materials before reaching a high explosive charge may produce loading that is comprised of more than one shock wave. Additionally, the build up to detonation in high explosive corner turning loads the explosive a short duration pressure pulse, since rarefactions can often rapidly overtake the reactive wave. For these reasons, we have studied the response of the insensitive high explosive (IHE) materials PBX 9502 and LX-17 to complex loadings of varied intensity and duration. We refer to a single loading of limited duration as a “thin pulse”, whereas more complex scenarios were studied with an impactor that produces a double shock in the explosive. The following report presents experimental data and analyses of thin pulse shock initiation and double shock experiments designed to guide development of models of Insensitive High Explosives (IHEs) under controlled one-dimensional conditions relevant to accident scenarios and corner turning. Thin pulse shock initiation data on PBX 9502 and LX-17 were obtained under varied pulse duration, pressed density, and temperature conditions in order to probe various parameters essential for the development of a physics-based Cheetah reactive flow hotspot model. In situ pressure gauges provide insight into the degree of reaction in the explosive that are not obtainable with optical PDV measurements or distance measurements such as run to detonation. Double shock data was obtained to inform a Composition Aware Cheetah model which can be applied to any TATB-based IHEs. This model supports efforts to find a new IHE formulation and potentially incorporate new binders into IHE formulations. Simulations of each experiment are included to demonstrate the utility of these focused experiments to developing models of HE behavior. One-dimensional gas gun experiments are essential for characterizing shocked HE behavior and informing HE models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Alumina Basicity in CO 2 Uptake in 3‐Aminopropylsilyl‐Grafted Alumina Adsorbents

Abstract Oxide‐supported amine materials are widely known to be effective CO 2 sorbents under simulated flue‐gas and direct‐air‐capture conditions. Most work has focused on amine species loaded onto porous silica supports, though potential stability advantages may be offered through the use of porous alumina supports. Unlike silica materials, which are comparably inert, porous alumina materials can be tuned to have substantial acidity and/or basicity. Owing to their amphoteric nature, alumina supports play a more active role in CO 2 sorption than silica supports, potentially directly participating in the adsorption process. In this work, primary amines associated with 3‐aminopropyltriethoxysilane are grafted onto two different mesoporous alumina materials having different levels of basicity. Adsorbent materials with different amine loadings are prepared, and the CO 2 ‐adsorption behavior of similar amines on the two alumina supports is demonstrated to be different. At low amine loadings, the inherent properties of the support surface play a significant role, whereas at high amine loadings, when the alumina surface is effectively blocked, the sorbents prepared on the two supports behave similarly. At high amine loadings, amine–CO 2 –amine interactions are shown to dominate, leading to adsorbed species that appear similar to the species formed over silica‐supported amine materials. The sorbent properties are comprehensively characterized using N 2 physisorption analysis, in situ FTIR spectroscopy, and adsorption microcalorimetry.

Potter, Matthew E.↗

Optimization of LAW Glass Former Additives

The primary objective of this work was to collect data to support processing Hanford LAW streams at higher rates through changes in mineralogy, forms, and grain sizes of the GFCs. This was achieved through assessment of LAW feeds with different GFCs by feed rheology testing, testing with a vertical gradient furnace (VGF) system to assess melt rates, and processing selected modified LAW feeds through a DM100 melter to measure glass production rates and processing behavior. A high waste loading glass formulation developed in earlier work [8] for an LAW composition specified by WTP was used for rheology, VGF, and melter testing. The glass composition, ORPLA20, is based on LAW tank AN-105; the glass has a waste loading of 31.4 wt% and a Na2O content of 24.0 wt%. Another high waste loading glass formulation developed in earlier work for an LAW composition specified by WTP was also used for VGF testing to investigate the effects of changes in GFCs on melt rate for a second waste and glass composition. That glass composition is ORPLD6, which is based on LAW tank AN-102; the glass has a waste loading of 25.9 wt% and a Na2O content of 22.0 wt%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO 2 Loading

Retaining sound electrochemical performance of electrodes at high mass loading holds critical importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO 2 ) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. However, this is only achievable with very small mass loading of active material typically less than 1 mg cm -2 . Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. In this work, we demonstrate a 3D printed graphene aerogel electrode with MnO 2 loading of 182.2 mg cm -2 , which achieves a record-high areal capacitance of 44.13 F cm -2 . Most importantly, this 3D printed graphene aerogel/MnO 2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.

36 MATERIALS SCIENCE↗

Fast Kinetics Design for Solid‐State Battery Device

Abstract Fast kinetics of solid‐state batteries at the device level is not adequately explored to achieve fast charging and discharging. In this work, a leap forward is achieved for fast kinetics in full cells with high cathode loading and areal capacity. This kinetic improvement is achieved by designing a hierarchical structure of electrode composites. In the cathode, the authors’ design enables high areal capacities above 3 mAh cm −2 to be stably cycled at high current densities of ≈13–40 mA cm −2 , yielding a C‐rate from 5 to 10 C. In the anode, the authors’ design breaks the common rule of the negative correlation between critical C‐rate and the discharge voltage that is observed in most other anodes. The overall design enables the fast cycling of such batteries for over 4000 cycles at room temperature and 5 C charge‐rate. The design principles unveiled by this work help to understand critical kinetic processes in battery devices that limit the fast cycling at high cathode loading and speed up the design of high‐performance solid‐state batteries.

Wang, Yichao↗

Solvent-Free Manufacturing of Lithium-Ion Battery Electrodes via Cold Plasma

Slurry casting has been used to fabricate lithium-ion battery electrodes for decades, which involves toxic and expensive organic solvents followed by high-cost vacuum drying and electrode calendering. This work presents a new manufacturing method using a nonthermal plasma to create inter-particle binding without using any polymeric binding materials, enabling solvent-free manufacturing electrodes with any electrochemistry of choice. The cold-plasma-coating technique enables fabricating electrodes with thickness (>200 μm), high mass loading (>30 mg cm -2 ), high peel strength, and the ability to print lithium-ion batteries in an arbitrary geometry. This crosscutting, chemistry agnostic, platform technology would increase energy density, eliminate the use of solvents, vacuum drying, and calendering processes during production, and reduce manufacturing cost for current and future cell designs. Here, lithium iron phosphate and lithium cobalt oxide were used as examples to demonstrate the efficacy of the cold-plasma-coating technique. It is found that the mechanical peel strength of cold-plasma-coating-manufactured lithium iron phosphate is over an order of magnitude higher than that of slurry-casted lithium iron phosphate electrodes. Full cells assembled with a graphite anode and the cold-plasma-coating-lithium iron phosphate cathode offer highly reversible cycling performance with a capacity retention of 81.6% over 500 cycles. For the highly conductive cathode material lithium cobalt oxide, an areal capacity of 4.2 mAh cm -2 at 0.2 C is attained. We anticipate that this new, highly scalable manufacturing technique will redefine global lithium-ion battery manufacturing providing significantly reduced plant footprints and material costs.

25 ENERGY STORAGE↗

Molecular structure and sour gas surface chemistry of supported K 2 O/WO 3 /Al 2 O 3 catalysts

Molecular structures of the unprompted and K 2 O-promoted supported WO 3 /Al 2 O 3 catalysts were studied with in situ Raman and UV-vis spectroscopy. In situ Raman spectra revealed that supported 20% WO 3 /Al 2 O 3 corresponds to near monolayer coverage of isolated and oligomeric surface WOx species on Al 2 O 3 . Above monolayer surface WO x coverage (21% WO 3 /Al 2 O 3 ), crystalline WO 3 nanoparticles are also present. The addition of K 2 O to the supported WO 3 /Al 2 O 3 catalyst increased the concentration of isolated surface WO x species and did not form K 2 WO 4 nanoparticles. The reducibility of the tungsten oxide structures depends on their structures (2D or 3D) and the K 2 O promoter. Their interaction with acidic CO 2 and SO 2 gases was also investigated. Adsorption of CO 2 creates several surface carbonate species of varying acidity that were detected using a combination of in situ IR and mass spectroscopy. Adsorbed bicarbonate form on weakly basic surface sites on tungsten oxide monolayer WO 3 /Al 2 O 3 catalyst as well as in the presence of low 2.5% K 2 O loading. At high 5% K 2 O loading, the presence of the strong surface basic sites yields adsorbed carbonates. In conclusion, after SO 2 pretreatment, however, new strongly adsorbed sulfate appears on the surface that inhibit CO 2 adsorption.

36 MATERIALS SCIENCE↗

Fuel economy and emissions evaluation of BMW hydrogen 7 mono-fuel demonstration vehicles.

This article summarizes the testing of two BMW Hydrogen 7 Mono-Fuel demonstration vehicles at Argonne National Laboratory's Advanced Powertrain Research Facility (APRF). The BMW Hydrogen 7 Mono-Fuel demonstration vehicles are derived from the BMW Hydrogen 7 bi-fuel vehicles and based on a BMW 760iL. The mono-fuel as well as the bi-fuel vehicle(s) is equipped with cryogenic hydrogen on-board storage and a gaseous hydrogen port fuel injection system. The BMW Hydrogen 7 Mono-Fuel demonstration vehicles were tested for fuel economy as well as emissions on the Federal Test Procedure FTP-75 cold-start test as well as the highway test. The results show that these vehicles achieve emissions levels that are only a fraction of the Super Ultra Low Emissions Vehicle (SULEV) standard for nitric oxide (NO{sub x}) and carbon monoxide (CO) emissions. For non-methane hydrocarbon (NMHC) emissions the cycle-averaged emissions are actually 0 g/mile, which require the car to actively reduce emissions compared to the ambient concentration. The fuel economy numbers on the FTP-75 test were 3.7 kg of hydrogen per 100 km, which, on an energy basis, is equivalent to a gasoline fuel consumption of 17 miles per gallon (mpg). Fuel economy numbers for the highway cycle were determined to be 2.1 kg of hydrogen per 100 km or 30 miles per gallon of gasoline equivalent (GGE). In addition to cycle-averaged emissions and fuel economy numbers, time-resolved (modal) emissions as well as air/fuel ratio data is analyzed to further investigate the root causes of the remaining emissions traces. The BMW Hydrogen 7 vehicles employ a switching strategy with lean engine operation at low engine loads and stoichiometric operation at high engine loads that avoids the NO{sub x} emissions critical operating regime with relative air/fuel ratios between 1 < {lambda} < 2. The switching between these operating modes was found to be a major source of the remaining NO{sub x} emissions. The emissions results collected during this period lead to the conclusion that the BMW Hydrogen 7 Mono-Fuel demonstration vehicles are likely the cleanest combustion engine vehicles ever tested at Argonne's APRF.

02 PETROLEUM↗

A rationally designed polysulfide-trapping interface on the polymeric separator for high-energy Li–S batteries

A coating layer consisting of a layer of graphene oxide (GO) inserted in between two layers of multi-walled carbon nanotubes (MWCNT) forms a multifunctional polysulfide-trapping triple-interface on the polymeric separator for lithium–sulfur (Li–S) batteries. The top and bottom highly conductive MWCNT interfaces are able to physically inhibit polysulfide diffusion and effectively reutilize the trapped active material during cycling. The inserted ultrathin GO layer with negatively charged carboxyl groups, on the other hand, electrostatically repels the migrating polysulfide anions. The stacked GO sheets also extensively prolong the migration routes of the polysulfides. Additionally, the “buffer zones” interspersed within the triple-interface accommodate the migrating polysulfides. Thus, the sandwiched separators enable Li–S cells with a high-sulfur-loading (10 mg cm -2 ), high areal capacity (10.9 mA h cm -2 ), and stable cycling ability even though the coating layer is ultra-thin (~17 μm) and light-weight (~0.23 mg cm -2 ).

25 ENERGY STORAGE↗

Glass Formulation Development for Al, Fe, and Na Phosphate HLW

The primary objective of the work described herein was to develop and identify HLW glass compositions and glass forming additive blends that achieve high waste loadings and processing rates for high phosphorus HLW streams while maintaining acceptable glass properties. Another objective was to determine the effect of phosphate form (aluminum, iron, sodium) on feed processing properties, glass production rates, and product quality while vitrifying a high phosphorus HLW stream. This was accomplished through a combination of crucible-scale tests, vertical gradient furnace tests, and confirmation tests on a DM100 melter system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrometer system measures nanoamps at high voltage

Floating electrometer eliminates major source of error since any leakage from electrometer case, which is at high voltage, appears only as load on high voltage supply and not as part of current being measured. Commands to and data from floating electrometer are transferred across high voltage interface by means of optical channels.

Sturman, J. C.↗