Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

The Hot Bending and Diffusion Bonding of TiAl-Based Alloy for Corrugated-Core Sandwich Structure

The multi-layer structure of TiAl-based alloys can meet the demand of having lightweight and high-strength properties at elevated temperature. In this paper, the corrugated-core sandwich structure of a TiAl-based alloy was fabricated by the hot bending/diffusion bonding process. In order to fabricate this structure, the high-temperature tensile property, hot bending behavior, and vacuum diffusion bonding of a Ti-47.5Al-Cr-V alloy were investigated. The flow behavior was evaluated by uniaxial tensile experiment, and the results showed that the alloy exhibited good plasticity at the given conditions, and the maximum elongation reached 200% at 1000 °C at strain rate of 3 × 10{sup −4} s{sup −1}. The bending experiments were also performed at temperatures of 950, 1000, and 1050 °C with fillet radii of R = 0, 0.5, and 1 mm, respectively. No micro-/macro-defects developed. The vacuum diffusion bonding of this alloy was also carried out, and the shear bonding strength of bonding joints was measured at room temperature. The maximum shear strength was 398 MPa, and the joint was obtained at 1000 °C/30 MPa/3 h. Combining the bonding interface with the shear strength of different joints, the appropriate bonding pressure and bonding time for diffusion bonding of the TiAl alloy at 1000 °C were 20 MPa and 2 h, respectively. Then, the forming process of the corrugated-core sheet was conducted at 1000 °C with a fillet radius of 1 mm. Finally, the corrugated-core sandwich structure was manufactured under vacuum atmosphere, and the mechanical properties and the interface microstructure were investigated.

36 MATERIALS SCIENCE↗

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗

Matching time and spatial scales of rapid solidification: Dynamic TEM experiments coupled to CALPHAD-informed phase-field simulations

A combination of dynamic transmission electron microscopy (DTEM) experiments and CALPHAD-informed phase-field simulations was used to study rapid solidification in Cu–Ni thin-film alloys. Experiments—conducted in the DTEM—consisted of in situ laser melting and determination of the solidification kinetics by monitoring the solid–liquid interface and the overall microstructure evolution (time-resolved measurements) during the solidification process. Modelling of the Cu–Ni alloy microstructure evolution was based on a phase-field model that included realistic Gibbs energies and diffusion coefficients from the CALPHAD framework (thermodynamic and mobility databases). DTEM and post mortem experiments highlighted the formation of microsegregation-free columnar grains with interface velocities varying from ~0.1 to ~0.6 m s –1 . After an 'incubation' time, the velocity of the planar solid–liquid interface accelerated until solidification was complete. In addition, a decrease of the temperature gradient induced a decrease in the interface velocity. The modelling strategy permitted the simulation (in 1D and 2D) of the solidification process from the initially diffusion-controlled to the nearly partitionless regimes. Lastly, results of DTEM experiments and phase-field simulations (grain morphology, solute distribution, and solid–liquid interface velocity) were consistent at similar time (μs) and spatial scales (μm).

36 MATERIALS SCIENCE↗

Atomistics of vapour–liquid–solid nanowire growth

Vapour–liquid–solid route and its variants are routinely used for scalable synthesis of semiconducting nanowires, yet the fundamental growth processes remain unknown. Here we employ atomic-scale computations based on model potentials to study the stability and growth of gold-catalysed silicon nanowires. Equilibrium studies uncover segregation at the solid-like surface of the catalyst particle, a liquid AuSi droplet, and a silicon-rich droplet–nanowire interface enveloped by heterogeneous truncating facets. Supersaturation of the droplets leads to rapid one-dimensional growth on the truncating facets and much slower nucleation-controlled two-dimensional growth on the main facet. Surface diffusion is suppressed and the excess Si flux occurs through the droplet bulk which, together with the Si-rich interface and contact line, lowers the nucleation barrier on the main facet. The ensuing step flow is modified by Au diffusion away from the step edges. Our study highlights key interfacial characteristics for morphological and compositional control of semiconducting nanowire arrays.

36 MATERIALS SCIENCE↗

Effect of near atmospheric pressure nitrogen plasma treatment on Pt/ZnO interface

The effect of near atmospheric pressure nitrogen plasma (NAP) treatment of platinum (Pt)/zinc oxide (ZnO) interface was investigated. NAP can nitride the ZnO surface at even room temperature. Hard x-ray photoelectron spectroscopy revealed that NAP treatment reduced the surface electron accumulation at the ZnO surface and inhibited the Zn diffusion into the Pt electrode, which are critical issues affecting the Schottky barrier height and the ideality factor of the Pt/ZnO structure. After NAP treatment, the Pt Schottky contact indicated an improvement of electrical properties. NAP treatment is effective for the surface passivation and the Schottky contact formation of ZnO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusion in single-phase binary alloys

DBAS 1 computer program provides analyst with simple algorithms for exact rapid solutions of systems with planar, cylindrical, or spherical interfaces. Conventional solutions are complex and present convergence problems. Two algorithm types are figured for each geometry; one converges rapidly for short and the other for long diffusion times. DBAS 1 is written in FORTRAN IV for batch execution.

Tenney, D. R.↗

Geometric consideration of nanostructures for energy storage systems

Battery performance and its fade are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures; kinetic reactions at the interfaces; and the corresponding interplay between mechanical, chemical, and thermal responses. The fundamental factor determining this complex multiscale and multiphysical nature of a battery is the geometry of active materials. In this work, we systematically consider the tradeoffs among a selection of limiting geometries of media designed to store ions or other species via a diffusion process. Specifically, we begin the investigation by considering diffusion in spheres, rods, and plates at the particle level, in order to assess the effects of geometry, diffusivity, and rate on capacity. Then, the study is extended to considering of the volume fraction and particle network, as well as kinetics at the interface with electrolyte. Our study suggests that, in terms of overall bulk level material performance, thin film batteries may generate the highest energy density with high power capability when they are implemented at nanoscales or with highly diffusion materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphological instability of a thermophoretically growing deposit

The stability of the planar interface of a structureless solid growing from a depositing component dilute in a carrier fluid is studied when the main solute transport mechanism is thermal (Soret) diffusion. A linear stability analysis, carried out in the limit of low growth Peclet number, leads to a dispersion relation which shows that the planar front is unstable either when the thermal diffusion factor of the condensing component is positive and the latent heat release is small or when the thermal diffusion factor is negative and the solid grows over a thermally-insulating substrate. Furthermore, the influence of interfacial energy effects and constitutional supersaturation in the vicinity of the moving interface is analyzed in the limit of very small Schmidt numbers (small solute Fickian diffusion). The analysis is relevant to physical vapor deposition of very massive species on cold surfaces, as in recent experiments of organic solid film growth under microgravity conditions.

Castillo, Jose L.↗

Band alignments in Fe/graphene/Si(001) junctions studied by x-ray photoemission spectroscopy

The control of tunnel contact resistance is of primary importance for semiconductor-based spintronic devices. This control is hardly achieved with conventional oxide-based tunnel barriers due to deposition-induced interface states. Manipulation of single 2D atomic crystals (such as graphene sheets) weakly interacting with their substrate might represent an alternative and efficient way to design new heterostructures for a variety of different purposes including spin injection into semiconductors. In the present paper, we study by x-ray photoemission spectroscopy the band alignments and interface chemistry of iron–graphene-hydrogenated passivated silicon (001) surfaces for a low and a high n-doping concentration. We find that the hydrogen passivation of the Si(001) surface remains efficient even with a graphene sheet on the Si(001) surface. For both doping concentrations, the semiconductor is close to flat-band conditions which indicates that the Fermi level is unpinned on the semiconductor side of the Graphene/Si(001):H interface. When iron is deposited on the graphene/Si(001):H structures, the Schottky barrier height remains mainly unaffected by the metallic overlayer with a very low barrier height for electrons, a sought-after property in semiconductor based spintronic devices. Finally, we demonstrate that the graphene layer intercalated between the metal and semiconductor also serves as a protection against iron-silicide formation even at elevated temperatures preventing from the formation of a Si-based magnetic dead layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-Valued Semigroups and (Causal) Diffusion

It can be shown that a process modeled by a strongly continuous real-valued semigroup (that has a space convolution operator as infinitesimal generator) cannot satisfy causality. By causality we mean that a characteristic feature of a process like an interface or a front must propagate with a finite speed. We present and discuss a causal model of diffusion that satisfies the semigroup property at a discrete set of time instants M:={l_brace}m{tau}|m is an element of N{sub 0}{r_brace} and that in contrast to the classical diffusion model is not smooth. More precisely, if v denotes the concentration of a substance diffusing with constant speed, then v is continuous but its time derivative is discontinuous at the discrete set M of time instants. It is this property of (causal) diffusion that forbids the classical limit procedure {tau}{yields}0 that leads to the noncausal diffusion model in Stochastics. Finally, we give two explanations why in some cases the discretization of the noncausal diffusion model can be considered as an approximation of the causal diffusion model. In particular, we present an inhomogeneous wave equation with a time dependent coefficient that is satisfied by causal diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A methodology to identify and quantify mobility-reducing defects in 4H-silicon carbide power metal-oxide-semiconductor field-effect transistors

In this paper, we present a methodology for the identification and quantification of defects responsible for low channel mobility in 4H-Silicon Carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs). To achieve this, we use an algorithm based on 2D-device simulations of a power MOSFET, density functional simulations, and measurement data. Using physical modeling of carrier mobility and interface traps, we reproduce the experimental I-V characteristics of a 4H-SiC doubly implanted MOSFET through drift-diffusion simulation. We extract the position of Fermi level and the occupied trap density as a function of applied bias and temperature. Using these inputs, our algorithm estimates the number of possible trap types, their energy levels, and concentrations at 4H-SiC/SiO{sub 2} interface. Subsequently, we use density functional theory (DFT)-based ab initio simulations to identify the atomic make-up of defects causing these trap levels. We study silicon vacancy and carbon di-interstitial defects in the SiC side of the interface. Our algorithm indicates that the D{sub it} spectrum near the conduction band edge (3.25 eV) is composed of three trap types located at 2.8–2.85 eV, 3.05 eV, and 3.1–3.2 eV, and also calculates their densities. Based on DFT simulations, this work attributes the trap levels very close to the conduction band edge to the C di-interstitial defect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Radial Segregation in Directionally Solidified Hg(0.89)Mn(0.11)Te

Bridgman growth experiments were performed on Hg(0.89)Mn(0.11)Te (MMT) to determine the extent of radial Manganese segregation during directional solidification. MMT crystals were directionally solidified at rates of 0.09 and 0.18 p d s and in axial thermal gradients of 83 and 68"C/cm. Wavelength Dispersive Spectroscopy (WDS) and Fourier Transform Infra-Red (FTIR) analytical techniques were used to determine the radial homogeneity in all boules and the deflection of the solid-liquid interface (SLI) in two boules that were rapidly quenched after 5 to 6 cm of directional solidification. For all growth runs, the measured radial coinpositional variations were on the order of 0.01 molar percent MnTe in the steady state region of growth. Comparison of the measured radial compositional results of the crystals to predicted values in the diffusion-limited regime indicate a strong influence of convection near the solid-liquid interface. This conclusion is supported by the weak influence of the translation rates and axial thermal gradients utilized in this study upon radial compositional homogeneity.

Price, M. W.↗

Nanoscale imaging of phonon dynamics by electron microscopy

Spatially resolved vibrational mapping of nanostructures is indispensable to the development and understanding of thermal nanodevices, modulation of thermal transport and novel nanostructured thermoelectric materials. Through the engineering of complex structures, such as alloys, nanostructures and superlattice interfaces, one can significantly alter the propagation of phonons and suppress material thermal conductivity while maintaining electrical conductivity. There have been no correlative experiments that spatially track the modulation of phonon properties in and around nanostructures due to spatial resolution limitations of conventional optical phonon detection techniques. Here we demonstrate two-dimensional spatial mapping of phonons in a single silicon–germanium (SiGe) quantum dot (QD) using monochromated electron energy loss spectroscopy in the transmission electron microscope. Tracking the variation of the Si optical mode in and around the QD, we observe the nanoscale modification of the composition-induced red shift. We observe non-equilibrium phonons that only exist near the interface and, furthermore, develop a novel technique to differentially map phonon momenta, providing direct evidence that the interplay between diffuse and specular reflection largely depends on the detailed atomistic structure: a major advancement in the field. Our work unveils the non-equilibrium phonon dynamics at nanoscale interfaces and can be used to study actual nanodevices and aid in the understanding of heat dissipation near nanoscale hotspots, which is crucial for future high-performance nanoelectronics.

36 MATERIALS SCIENCE↗

Optimal design of a model energy conversion device

Fuel cells, batteries, and thermochemical and other energy conversion devices involve the transport of a number of (electro-) chemical species through distinct materials so that they can meet and react at specified multi-material interfaces. Therefore, morphology or arrangement of these different materials can be critical in the performance of an energy conversion device. In this paper, we study a model problem motivated by a solar-driven thermochemical conversion device that splits water into hydrogen and oxygen. We formulate the problem as a system of coupled multi-material reaction-diffusion equations where each species diffuses selectively through a given material and where the reaction occurs at multi-material interfaces. In conclusion, we introduce a phase-field formulation of the optimal design problem and numerically study selected examples.

30 DIRECT ENERGY CONVERSION↗

In situ growth of ceramic quantum dots in polyaniline host via water vapor flow diffusion as potential electrode materials for energy applications

In situ preparation of polyaniline-ceramic nanocomposites has recently demonstrated that the electrical properties are highly improved with respect to the typical ex situ preparations. In this report, we present for the first time, to the best of our knowledge, the in situ growth of titanium oxide quantum dots in polyaniline host via water vapor flow diffusion as an easily adaptable route to prepare other ceramic-polymer nanocomposites. The main relevance of this method is the possibility to prepare ceramic quantum dots from alkoxide precursors using water vapor flow into any hydrophobic polymer host and to achieve good homogeneity and size-control. In addition, we perform full characterization by means of high-resolution transmission electron microscopy, X-ray powder diffraction, small angle X-ray scattering, thermogravimetric and calorimetric analyses, confocal Raman microscopy and impedance spectroscopy analyses. The presence of the polymer host and interparticle Coulomb repulsive interactions was evaluated as an influence for the formation of ~3–8 nm equally-sized quantum dots independently of the concentration. The polyaniline polaron population showed an increase for the quantum dots diluted regime and the suppression at the concentrated regime, ascribed to the formation of chemical bonds at the interface, which was confirmed by theoretical simulations. In agreement with the previous observation, the in situ growth of ceramic quantum dots in polyaniline host via water vapor flow diffusion could be very useful as a novel approach to prepare electrode materials for energy conversion and storage applications. - Highlights: • In situ growth of titanium oxide quantum dots in polyaniline host via water vapor flow diffusion. • Polyaniline charge carriers at the interface and charge interactions between quantum dots. • Easy extrapolation to sol-gel derived quantum dots into polymer host as potential electrode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Crystal Intermetallic M-Sn (M ) Fe, Cu, Co, Ni) Nanospheres as Negative Electrodes for Lithium-Ion Batteries

FeSn2, Cu6Sn5, CoSn3, and Ni3Sn4 single-crystalline nanospheres with a characteristic uniform particle size of 40 nm have been synthesized via a modified polyol process, aiming at determining and understanding their intrinsic cycling performance as negative electrode materials for lithium-ion batteries. We find that, in this morphologically controlled condition, the reversible capacities follow FeSn2 > Cu6Sn5 ? CoSn3 > Ni3Sn4, which is not directly decided by their theoretical capacities or lithium-driven volume changes. FeSn2 exhibits the best electrochemical activity among these intermetallic nanospheres and an effective solid electrolyte interface, which explains its superior cycling performance. The small particle dimension also improves cycling stability and Li+ diffusion.

25 ENERGY STORAGE↗

Ultra-thin passivation layers in Cu(In,Ga)Se 2 thin-film solar cells: full-area passivated front contacts and their impact on bulk doping

In the search for highly transparent and non-toxic alternative front layers replacing state-of-the-art CdS in Cu(In,Ga)Se 2 thin-film solar cells, alternatives rarely exceed reference devices in terms of efficiency. Full-area ultra-thin aluminium oxide tunnelling layers do not require any contact patterning and thus overcome the main drawback of insulating passivation layers. Even a few monolayers of aluminium oxide can be deposited in a controlled manner by atomic layer deposition, they show excellent interface passivation properties, low absorption, and suitable current transport characteristics on test devices. Depositing a ZnO-based transparent front contact, however, results in extremely poor solar cell performance. The issue is not necessarily a low quality of the alternative front layer, but rather the intricate relation between front layer processing and electronic bulk properties in the absorber layer. We identify three challenges critical for the development of novel front passivation approaches:(i) both Cd and Zn impurities beneficially reduce the high native net dopant concentration in the space charge region, (ii) sputter deposition of ZnO damages the passivation layer resulting in increased interface recombination, (iii) thermal treatments of devices with ZnO layer result in substantial Zn diffusion, which can penetrate the full absorber thickness already at moderate temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗