Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Generation of gas-phase zirconium fluoroanions by electrospray of an ionic liquid

RATIONALE: When measuring extremely wide isotope ratios (= 1 x 109) accelerator mass spectrometry (AMS) is the instrument of choice, however it requires an anion for injection into the tandem accelerator. Since many elements do not have positive electronegativities they do not form stable negative atomic ions, and hence are not compatible for isotope ratio measurement using AMS. Thus new approaches for forming anions are sought; fluoroanions are particularly attractive because fluorine is monoisotopic, and thus will not have overlapping isobars with the isotope of interest. METHODS: An approach is described for making zirconium fluoroanions using the fluorinating ionic liquid (IL) 1-ethyl-3-methylimidazolium fluorohydrogenate, which was used to generate abundant [ZrF5-] using electrospray ionization. The IL was dissolved in acetonitrile, combined with a dilute solution of either Zr4+ or ZrO2+, and then electrosprayed. Mass analysis and collision induced dissociation were conducted using a time-of-flight mass spectrometer. Cluster structures were predicted using density functional theory calculations. RESULTS: The fluorohydrogenate IL solutions generated abundant [ZrF5-] starting from solutions of both Zr4+ and ZrO2+. The mass spectra also contained IL-bearing cluster ions, whose compositions indicated the presence of [ZrF6]2- in solution, a conclusion supported by the structural calculations. Rinsing out the zirconium-IL solution with acetonitrile decreased the IL clusters, but enhanced [ZrF5]-, which was sorbed by the polymeric electrospray supply capillary, and then released upon rinsing. This reduced the ion background in the mass spectrum. CONCLUSIONS: The fluorohydrogenate-IL solutions are a facile way to form zirconium fluoroanions in the gas phase using electrospray. The approach has potential as a source of fluoroanions for injection into an AMS, which would enable high-sensitivity measurement of minor zirconium isotopes, and benefits from the absence of overlapping isobars caused by the charge carrier (i.e., the monoisotopic fluorine atoms).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO 2

Direct air capture (DAC) of CO 2 has emerged as the most promising “negative carbon emission” technologies. Despite being state-of-the-art, sorbents deploying alkali hydroxides/amine solutions or amine-modified materials still suffer from unsolved high energy consumption and stability issues. Here, in this work, composite sorbents are crafted by hybridizing a robust metal-organic framework (Ni-MOF) with superbase-derived ionic liquid (SIL), possessing well maintained crystallinity and chemical structures. The low-pressure (0.4 mbar) volumetric CO 2 capture assessment and a fixed-bed breakthrough examination with 400 ppm CO 2 gas flow reveal high-performance DAC of CO 2 (CO 2 uptake capacity of up to 0.58 mmol g -1 at 298 K) and exceptional cycling stability. Operando spectroscopy analysis reveals the rapid (400 ppm) CO 2 capture kinetics and energy-efficient/fast CO 2 releasing behaviors. The theoretical calculation and small-angle X-ray scattering demonstrate that the confinement effect of the MOF cavity enhances the interaction strength of reactive sites in SIL with CO 2 , indicating great efficacy of the hybridization. The achievements in this study showcase the exceptional capabilities of SIL-derived sorbents in carbon capture from ambient air in terms of rapid carbon capture kinetics, facile CO 2 releasing, and good cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical and Ionic Characterization for Organic Semiconductor–Incorporated Perovskites for Stable 2D/3D Heterostructure Perovskite Solar Cells

Hybrid metal halide perovskite (MHP) materials, while being promising for photovoltaic technology, also encounter challenges related to material stability. Combining 2D MHPs with 3D MHPs offers a viable solution, yet there is a gap in the understanding of the stability among various 2D materials. The mechanical, ionic, and environmental stability of various 2D MHP ligands are reported, and an improvement with the use of a quater-thiophene-based organic cation (4TmI) that forms an organic-semiconductor incorporated MHP structure is demonstrated. It is shown that the best balance of mechanical robustness, environmental stability, ion activation energy, and reduced mobile ion concentration under accelerated aging is achieved with the usage of 4TmI. It is believed that by addressing mechanical and ion-based degradation modes using this built-in barrier concept with a material system that also shows improvements in charge extraction and device performance, MHP solar devices can be designed for both reliability and efficiency.

14 SOLAR ENERGY↗

Spectroscopic and Chemical Properties of Ionic Liquids: Computational Study

A brief account is given of highlights of our computational efforts – often in collaboration with experimental groups – to understand spectroscopic and chemical properties of ionic liquids (ILs). Molecular dynamics, including their inhomogeneous character, responsible for key spectral features observed in dielectric absorption, infra-red (IR) and fluorescence correlation spectroscopy (FCS) measurements are elucidated. Mechanisms of chemical processes involving imidazolium-based ILs are illustrated for CO 2 capture and related reactions, transesterification of cellulose, and Au nanocluster-catalyzed Suzuki cross-coupling reaction with attention paid to differing roles of IL ions. A comparison with experiments is also made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapter 3: New Developments on Ionic Liquid-Tolerant Microorganisms Leading Toward a More Sustainable Biorefinery

The growing concerns about climate change and energy security are driving the development of bio-based technologies to produce renewable liquid fuels and chemicals. Ionic liquids (ILs) have demonstrated to be promising solvents to pretreat lignocellulosic residues, promoting efficient enzymatic hydrolysis of lignocellulosic carbohydrates into sugars, which can be further used by microorganisms to produce biofuels and other value-added chemicals. Despite their unique properties to effectively deconstruct plant cell walls, ILs show strong interactions with the pretreated biomass, and their presence is often inhibitory to cellulolytic enzymes and microorganisms. The most advanced biorefinery concepts based on IL pretreatments focus on the development of more biocompatible ILs and more robust microbial strains with higher tolerance to ILs. This chapter provides an overview and a discussion over the main efforts performed on the screening and development of IL-tolerant microbial strains, as well as in more biocompatible IL pretreatment methods. These early research advancements in this field offer a baseline and a platform for future research with the goal of improving the sustainability and economic viability of IL pretreatment-based biorefineries.

bioconversion↗

Enrichment of microbial communities tolerant to the ionic liquids tetrabutylphosphonium chloride and tributylethylphosphonium diethylphosphate

Our aims were to identify thermophilic microbial communities that degrade green waste in the presence of the ionic liquids (IL) tetrabutylphosphonium chloride and tributylethylphosphonium diethylphosphate and examine preservation methods for IL-tolerant communities. High-solids incubations with stepwise increases in IL concentration were conducted to enrich for thermophilic IL-tolerant communities that decomposed green waste. 16S rRNA sequencing of enriched communities revealed microorganisms capable of tolerating high levels of IL. Furthermore, cryogenic preservation of enriched communities reduced the IL tolerance of the community and decreased the relative abundance of IL-tolerant organisms. The use of cryoprotectants did not have an effect on microbial activity on green waste of the stored community. A successful approach was developed to enrich communities that decompose green waste in thermophilic high-solids environments in the presence of IL. Alternative community storage and revival methods are necessary for maintenance and recovery of IL-tolerant communities. The enriched communities provide a targeted source of enzymes for the bioconversion of IL-pretreated green waste for conversion to biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

Tertiary and Quaternary Ammonium-Phosphate Ionic Liquids as Lubricant Additives

In this work we investigated the feasibility of five quaternary (aprotic) and four tertiary (protic) ammonium ionic liquids (ILs) with an identical organophosphate anion as lubricant antiwear additives. Viscosity, oil solubility, thermal stability, and corrosivity of the candidate ILs were characterized and correlated to the molecular structure. The protic group exhibits higher oil solubility than the aprotic group, and longer alkyl chains seem to provide better oil solubility and higher thermal stability. Selected ILs were applied as oil additives in steel-cast iron tribological tests and demonstrated promising anti-scuffing and anti-wear functionality. The thickness, nanostructure, coverage and composition of the tribofilm formed by the besting performing IL were revealed by surface characterization for mechanistic understanding of the tribochemical interactions between the IL and metal surface. Results provide fundamental insights of the correlations among the molecular structure, physiochemical properties and lubricating performance for ammonium-phosphate ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Liquids as Extreme Pressure Additives for Bearing Steel Applications

The protection of steel surfaces from wear under extreme pressure conditions is of major importance in several industries as it provides better performance and longer life of machinery. The motivation for this work was to study the lubrication of steel by ionic liquids (ILs), which have recently emerged as greener alternatives to commercial lubricants and additives. Three ILs based on sulfur-containing anions, used as 2-wt% additives in polyethylene glycol base oil (MW 200; PEG 200), were tested in the lubrication of ASTM 52100 bearing steel contacts in extreme pressure conditions (under mixed lubrication with a Hertzian pressure of 1.12 GPa) using a mini traction machine (MTM). Due to the poor resistance to corrosion of bearing steel, a semi-ester of succinic acid derivative corrosion inhibitor (Lanxess RC 4801) was added to the mixtures at a 1 wt% concentration. The ILs 1-hexyl-methylimidazolium trifluoromethanesulfonate ([C 6 mim][TfO]) and 1-hexyl-4-picolinium trifluoromethanesulfonate ([C 6 -4-pic][TfO]) revealed promising results in terms of surface protection of bearing steel. In contrast, 4-picolinium hydrogen sulfate ([4-picH][HSO 4 ]) as 2-wt% additive to PEG 200 + 1% RC 4801 did not show any improvement in wear performance compared to neat PEG 200 + 1% RC 4801. PEG 200 + 2% [C 6 mim][TfO] + 1%RC 4801 allowed for a decrease in wear up to ~ 76% and PEG 200 + 2% [C 6 -4-pic][TfO] + 1%RC 4801 up to ~ 46% when compared with neat PEG 200 + 1% RC 4801. Optical microscopy images suggest the formation of an adsorbed layer, which was further supported by chemical analysis via x-ray photoelectron spectroscopy (XPS) data for [C6mim][TfO].

friction↗

Molecular simulation study of dynamical properties of room temperature ionic liquids with carbon pieces

Room temperature ionic liquids (RTILs) with dispersed carbon pieces exhibit distinctive physiochemical properties. In order to explore the molecular mechanism, RTILs/carbon pieces mixture we investigated it by molecular dynamics (MD) simulation in this work. Rigid and flexible carbon pieces in the form of graphene with different thicknesses and carbon nanotubes in different sizes were dispersed in a representative RTIL 1-butyl-3-methyl-imidazolium dicyanamide ([Bmim][DCA]). Our study demonstrated that the diffusion coefficients of RTILs in the presence of flexible carbons are similar to those of bulk RTILs at varying temperatures, which is in contrast to the decreased diffusion of RTILs in the presence of rigid carbons. In addition, interfacial ion number density at rigid carbon surfaces was higher than that at flexible ones, which is correlated with the accessible external surface area of carbon pieces. The life time of cation-anion pair in the presence of carbon pieces also exhibited a dependence on carbon flexibility. RTILs with dispersed rigid carbon pieces showed longer ion pair life time than those with flexible ones, in consistence with the observation in diffusion coefficients. Furthermore, this work highlights the necessity of including the carbon flexibility when performing MD simulation of RTILs in the presence of dispersed carbon pieces in order to obtain the reliable dynamical and interfacial structural properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrasound-driven fabrication of high-entropy alloy nanocatalysts promoted by alcoholic ionic liquids

High-entropy alloy nanoparticles (HEA-NPs) are highly underutilized in heterogeneous catalysis due to the absence of a reliable, sustainable, and facile synthetic method. Herein, we report a facile synthesis of HEA nanocatalysts realized via an ultrasound-driven wet chemistry method promoted by alcoholic ionic liquids (AILs). Owing to the intrinsic reducing ability of the hydroxyl group, AILs were synthesized and utilized as environmentally friendly alternatives to conventional reducing agents and volatile organic solvents in the synthetic process. Under high-intensity ultrasound irradiation, Au 3+ , Pd 2+ , Pt 2+ , Rh 3+ , and Ru 3+ ions were co-reduced and transformed into single-phase HEA (AuPdPtRhRu) nanocrystals without calcination. Characterization results reveal that the as-synthesized nanocrystals are composed of elements of Au, Pd, Pt, Rh, and Ru as expected. Compared to the monometallic counterparts such as Pd-NPs, the carbon-supported HEA nanocatalysts show superior catalytic performance for selective hydrogenation of phenol to cyclohexanone in terms of yield and selectivity. Our synthetic strategy provides an improved and facile methodology for the sustainable synthesis of multicomponent alloys for catalysis and other applications.

36 MATERIALS SCIENCE↗

Fast and Non-Destructive Determination of Water Content in Ionic Liquids at Varying Temperatures by Raman Spectroscopy and Multivariate Regression Analysis

Imidazolium acetate ionic liquids (ILs) have been utilized as promising solvents in many applications that involve varying water content and temperature. These experimental variables affect the anion-cation intermolecular interactions, which in turn influence the performance of the ILs in these applications. Here, this paper shows Raman spectroscopy can be used as an operando method to measure water content in IL solvents when simultaneous temperature changes may occur. The Raman spectra of 1-alkyl-3-methylimidazolium acetate ILs (alkyl chain length n = 2, 4, 6, 8) with varying water content (from 0.028 to 0.899 water mole fraction) and temperature (from 78.1 K to 423.1 K) were measured. Increasing the water content or decreasing the temperature of the tested ILs weakens the anion-cation intermolecular interactions. The water content of these ILs can be quantified even in conditions when the temperature is changing using Raman spectroscopy combined with multivariate regression analysis, including principal component regression (PCR), partial-least-squares regression (PLSR), and artificial neural networks (ANNs). The ANN model combined with partial-least-squares (PLS) achieves the highest prediction accuracy of water content in ILs at varying temperatures (RMSECV = 0.017, R 2 CV = 99.1%, RMSEP = 0.019, R 2 P = 98.8%, RPD = 8.93). Raman spectroscopy provides a potential fast non-destructive operando method to monitor the water content of ILs even in applications when the temperature may be simultaneously altered; this information can lead to the optimized use of these ILs in many applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorinated ionic liquids as gas chromatographic stationary phases for the separation of volatile per- and polyfluoroalkyl substances

Background Here, the production of fluorinated organic compounds in the manufacturing, semiconductor, and pharmaceutical industries has increased exponentially over the past decade. This rapid growth has created an urgent need for efficient chromatographic platforms capable of selectively separating these compounds from complex mixtures, not only to support industrial quality control and waste management practices, but also to enable reliable environmental monitoring of volatile fluorinated contaminants. Conventional GC stationary phases lack the fluorophilic interactions needed for highly fluorinated analytes. Consequently, there is a clear demand for specialized stationary phases designed to improve chromatographic retention and selectivity for these compounds. Results Three stationary phases composed of fluorinated ionic liquids (ILs) with varied extent of fluorination were prepared to study fluorophilic interactions with fluorinated/non-fluorinated probe molecules by gas chromatography (GC). IL stationary phases featuring linear and branched perfluoroalkyl moieties, as well as a branched alkyl moiety, were systematically investigated. Chromatographic performance was examined using fluorinated compounds and their hydrocarbon analogs, including CF 3 -substituted aromatics, aliphatic alcohols, fluorotelomer alcohols (FTOHs), and perfluoroalkenes. Measurements on 5 m and 20 m columns revealed that the IL possessing branched alkyl provided stronger dispersive and hydrogen bonding interactions toward non-fluorinated aromatic and long-chain alcohols, whereas the fluorinated ILs enhanced retention of highly fluorinated FTOHs and perfluorodecene. Comprehensive two-dimensional GC (GC × GC), using a nonpolar primary column coupled with secondary columns featuring cross-bonded poly(trifluoropropylmethyl siloxane) (Rtx-200 ms), the branched fluorinated IL, or the branched non-fluorinated IL, highlighted complementary selectivity with the branched fluorinated IL providing the strongest interactions with fluorinated analytes. Significance These results demonstrate that fluorinated IL stationary phases are promising alternatives to conventional polysiloxane stationary phases for improving the separation of per- and polyfluoroalkyl substances and related fluorinated compounds. By correlating IL structure with fluorophilic interactions, this work establishes design principles for GC stationary phases that enable enhanced selectivity for highly fluorinated analytes while maintaining complementary interactions with non-fluorinated compounds.

Comprehensive two-dimensional GC↗

Accelerated Cellulose Depolymerization Catalyzed by Paired Metal Chlorides in Ionic Liquid Solvent

Efficient hydrolytic depolymerization of crystalline cellulose to sugars is a critical step and has been a major barrier for improved economics in the utilization of cellulosic biomass. We report a novel catalytic system involving paired metal chlorides in an ionic liquid that considerably accelerates the rate of cellulose depolymerization under mild conditions. Paired metal chlorides, consisting of CuCl2 (primary metal chloride) and a second metal chloride, such as CrCl2, PdCl2, CrCl3 or FeCl3 in 1-ethyl-3-methylimidazolium chloride ([EMIM]Cl) solvent were found to substantially accelerate the hydrolytic cleavage of 1,4-glucosidic bonds as compared to known acid-catalyzed hydrolysis in similar temperature range (80-120°C). In contrast, single metal chlorides with the same total molar loading showed much lower activity under similar conditions. Experimental results illustrate the dramatic effect of the second metal chloride in the paired catalytic system. A combination of characterization techniques, including electron paramagnetic resonance (EPR) spectroscopy, differential scanning calorimetry (DSC), X-ray absorption fine structure (XAFS) spectroscopy, and X-ray absorption near edge structure (XANES) spectroscopy, were used to reveal a preliminary understanding of possible mechanisms involved in the paired CuCl2/PdCl2 catalytic system. Results suggest that the C2-proton of the imidazolium ring may be activated by the paired metal-chloride catalysts.

09 BIOMASS FUELS↗

Ionic liquid-based hybrid absorption cycle for water heating, dehumidification, and cooling

Water heating, dehumidification and space cooling are responsible for significant energy consumption in buildings. A potential energy saving measure is to develop hybrid systems that can utilize the sensible and latent heats removed in space cooling to heat water. In this paper, we present experimental results on a hybrid system that utilizes the latent heat released in the dehumidification process for water heating. This system absorbs water vapor from the air and transfers the heat of phase change into the process water. The absorbed water vapor is then liberated in a desorber and subsequently condensed in a condenser, while its latent heat is transferred to the process water. The condensed water vapor can then be either drained (if dehumidification is desired), or utilized in an evaporative cooling process (if sensible space cooling is desired). In essence, the system can exchange both sensible and latent heats with its ambient. The main innovations implemented in the system are (1) a semi-open absorption system architecture to lower the system cost, (2) a membrane-based absorber to alleviate the liquid entrainment issue encountered in the conventional packed bed absorbers and (3) an ionic liquid that eliminates the crystallization risks and minimizes corrosion issues normally associated with LiBr-based absorption systems. Furthermore, a water heating thermal COP of 1.4 is achieved at 30°C, 70% RH ambient conditions.

42 ENGINEERING↗

Modification of conventional peak shapes to accurately represent spectral asymmetry: High-Resolution X-ray photoelectron spectra of [C 4 C 1 Pyrr][NTf 2 ] and [C 8 C 1 Im][NTf 2 ] ionic liquids

X-ray photoelectron spectroscopy (XPS) is one of the most widely used techniques for surface characterization. Analysis of XPS data is challenging and requires the analyst to fit the data with synthetic line shapes to reach physically meaningful interpretations. Experimental spectral envelopes, however, are complex and display asymmetric features that are often ignored or attributed to additional chemical components. The high-resolution XPS spectra of [C 4 C 1 Pyrr][NTf 2 ] and [C 8 C 1 Im][NTf 2 ] all exhibit a degree of asymmetry which is systematically observed at the higher binding energy side of photoemission envelopes. Here, we present the development of a refined fitting procedure for XPS spectra of these ionic liquid-based systems which include (a) Shirley background offset necessary to account for the insulator-like region and (b) spectral asymmetry in C 1s and N 1s regions. Further, Shirley and trapezoid components are applied to compensate for inelastic scattering taking place during electron transitions as high as 7.8 eV above the start of the fitting region in C 1s high-resolution spectrum. To demonstrate the fitness of this model, we present an analysis of a 2:1 mixture of [C 4 C 1 Pyrr][NTf 2 ]: [C 8 C 1 Im][NTf 2 ].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi-Continuous Measurement of PM2.5 Ionic Composition at Several Rural Locations in the United States

To improve understanding of the nature and variability of the ionic fraction of atmospheric fine aerosol particles in non-urban environments, one to two month measurement campaigns were conducted at several rural locations in the United States. Study sites included Yosemite National Park (NP) (July – September 2002), Bondville, Illinois (February 2003), San Gorgonio Wilderness Area, California (April and July 2003), Grand Canyon NP, Arizona (May 2003), Brigantine National Wildlife Refuge (NWR), New Jersey (November 2003), and Great Smoky Mountains NP, Tennessee (July/August 2004). PM2.5 ion composition was measured at 15-minute intervals using a Particle Into Liquid Sampler (PILS) coupled to two ion chromatographs. Comparison of PILS measurements with parallel traditional 24-hr denuder/filter-pack measurements reveal generally good agreement between the two techniques, although PILS measurements of PM2.5 NH4+ appear to be biased slightly low. High-time resolution aerosol concentration measurements provide much better estimates of the range of aerosol concentration levels experienced at these rural locations. Ratios of peak 15-min to 24-hr nitrate concentrations, for example, ranged from 1.7 at Brigantine NWR to 7.0 at the Great Smoky Mountains NP. A strong influence of diurnal upslope/downslope transport patterns was observed on aerosol concentrations at several locations, including Yosemite NP, San Gorgonio Wilderness Area, and Great Smoky Mountains NP, with peak concentrations typically occurring during afternoon upslope transport. High time resolution aerosol composition measurements also provide new insight into relationships between individual aerosol species and the influence of environmental conditions on aerosol composition. Observations at several locations revealed important information about mechanisms of particle nitrate formation. At Yosemite and Grand Canyon NPs, for example, evidence was observed for reaction of nitric acid or its precursors with sea salt or soil dust. Observations from several sites also revealed the importance of aerosol acidity (Great Smoky Mountains NP, Bondville) and temperature/humidity (San Gorgonio, Bondville) on fine particle ammonium nitrate formation.

54 ENVIRONMENTAL SCIENCES↗

Characterization of white poplar and eucalyptus after ionic liquid pretreatment as a function of biomass loading using X-ray diffraction and small angle neutron scattering

A systematic study was done to understand interactions among biomass loading during ionic liquid (IL) pretreatment, biomass type and biomass structures. White poplar and eucalyptus samples were pretreated using 1-ethyl-3-methylimidazolium acetate (EmimOAc) at 110 °C for 3 h at biomass loadings of 5, 10, 15, 20 and 25 wt%. All of the samples were chemically characterized and tested for enzymatic hydrolysis. Physical structures including biomass crystallinity and porosity were measured by X-ray diffraction (XRD) and small angle neutron scattering (SANS), respectively. SANS detected pores of radii ranging from ~25 to 625 Å, enabling assessment of contributions of pores with different sizes to increased porosity after pretreatment. Contrasting dependences of sugar conversion on white poplar and eucalyptus as a function of biomass loading were observed and cellulose crystalline structure was found to play an important role.

59 BASIC BIOLOGICAL SCIENCES↗

Ultra-selective membrane composed of charge-stabilized fixed carrier and amino acid-based ionic liquid mobile carrier for highly efficient carbon capture

Membrane technology has been extensively studied for CO 2 capture applications, especially for flue gas sources. In the past decades, facilitated transport membranes (FTMs) have made breakthroughs overcoming the permeance-selectivity trade-off upper bound restricting traditional CO 2 separation membranes, but are still facing challenges towards practical applications, including limited performance, such as insufficient CO 2 /N 2 selectivity to achieve 95 % CO 2 dry-base purity by one step separation, and long-term stability. Herein, we designed and fabricated a novel FTM structure containing an ionic liquid (1-ethyl-3-methylimidazolium aminoacetate, [Emim][Gly]) as mobile CO 2 -carrier and a polymeric amine (polyethyleneimine, PEI) as fixed CO 2 -carrier. In this study, the fixed carrier is confined within a carbon nanotube (CNT) framework of 230 nm thickness via electrostatic forces adjusted by a polyelectrolyte (polystyrene sulfonate, PSS), while the mobile carrier diffuses freely within the CNT framework. After optimization of the membrane recipe and spray-coating fabrication procedure, following our previous work, the resulting CNT-PSS-PEI ~ IL membranes demonstrated an ultra-high CO 2 /N 2 selectivity up to 1,000 with CO 2 permeance up to 2,400 GPU (Gas Permeation Unit, 1 GPU = 3.348 × 10 -10 mol·s -1 ·m -2 ·Pa -1 ) under vacuum operation condition. Furthermore, one 100-cm 2 flat sheet membrane sample was prepared and exhibited one-stage CO 2 enrichment from 15 % to 95 % purity (dry-base) for the first time amongst all reported CO 2 separation membranes. The membrane retained a stable performance over 50-h operation period under vacuum condition. The extraordinary CO 2 separation performance illustrates the great potential of the CNT-PSS-PEI ~ IL membranes for flue gas carbon capture application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗