Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Numerical Study of Coupled Water and Vapor Flow, Heat Transfer, and Solute Transport in Variably-Saturated Deformable Soil During Freeze-Thaw Cycles

As climate change intensifies, soil water flow, heat transfer, and solute transport in the active, unfrozen zones within permafrost and seasonally frozen ground exhibit progressively more complex interactions that are difficult to elucidate with measurements alone. For example, frozen conditions impede water flow and solute transport in soil, while heat and mass transfer are significantly affected by high thermal inertia generated from water-ice phase change during the freeze-thaw cycle. To assist in understanding these subsurface processes, the current study presents a coupled two-dimensional model, which examines heat conduction-convection with water-ice phase change, soil water (liquid water and vapor) and groundwater flow, advective-dispersive solute transport with sorption, and soil deformation (frost heave and thaw settlement) in variably saturated soils subjected to freeze-thaw actions. This coupled multiphysics problem is numerically solved using the finite element method. The model's performance is first verified by comparison to a well-documented freezing test on unsaturated soil in a laboratory environment obtained from the literature. Then based on the proposed model, we quantify the impacts of freeze-thaw cycles on the distribution of temperature, water content, displacement history, and solute concentration in three distinct soil types, including sand, silt and clay textures. The influence of fluctuations in the air temperature, groundwater level, hydraulic conductivity, and solute transport parameters was also comparatively studied. The results show that (a) there is a significant bidirectional exchange between groundwater in the saturated zone and soil water in the vadose zone during freeze-thaw periods, and its magnitude increases with the combined influence of higher hydraulic conductivity and higher capillarity; (b) the rapid dewatering ahead of the freezing front causes local volume shrinkage within the non-frozen region when the freezing front propagates downward during the freezing stage and this volume shrinkage reduces the impact of frost heave due to ice formation. This gradually recovers when the thawed water replenishes the water loss zone during the thawing stage; and (c) the profiles of soil moisture, temperature, displacement, and solute concentration during freeze-thaw cycles are sensitive to the changes in amplitude and freeze-thaw period of the sinusoidal varying air temperature near the ground surface, hydraulic conductivity of soil texture, and the initial groundwater levels. Our modeling framework and simulation results highlight the need to account for coupled thermal-hydraulic-mechanical-chemical behaviors to better understand soil water and groundwater dynamics during freeze-thaw cycles and further help explain the observed changes in water cycles and landscape evolution in cold regions.

54 ENVIRONMENTAL SCIENCES↗

Evaporation Rates of Brine on Mars

While Mars is now largely a dry and barren place, recent data have indicated that water has flowed at specific locations within the last approx. 10(exp 6) y. This had led to a resurgence of interest in theoretical and experimental work aimed at understanding the behavior of water on Mars. There are several means whereby the stability of liquid water on Mars could be increased, one being the presence solutes that would depress the freezing point. Salt water on Earth is about 0.5M NaCl, but laboratory experiments suggest that martian salt water is quite different. We recently began a program of laboratory measurements of the stability of liquid water, ice and ice-dust mixtures under martian conditions and here report measurements of the evaporation rate of 0.25M brine.

Sears, D. W. G.↗

HIGH-PRECISION MACLAURIN-BASED MODELS OF ROTATING LIQUID PLANETS

We present an efficient numerical self-consistent field method for calculating a gravitational model of a rotating liquid planet to spherical harmonic degree {approx}30 and a precision {approx}10{sup -12} in the external gravity field. The method's accuracy is validated by comparing results, for Jupiter rotation parameters, with the exact Maclaurin constant-density solution. The method can be generalized to non-constant density.

79 ASTRONOMY AND ASTROPHYSICS↗

Dipolar correlations in liquid water

We present an analysis of the dipolar correlations in water as a function of temperature and density and in the presence of simple ionic solutes, carried out using molecular dynamics simulations and empirical potentials. We show that the dipole-dipole correlation function of the liquid exhibits sizable oscillations over nanodomains of about 1.5 nm radius, with several isosbestic points as a function of temperature; the size of the nanodomains is nearly independent on temperature and density, between 240 and 400 K and 0.9 and 1.3 g/cm{sup 3}, but it is substantially affected by the presence of solvated ions. In the same range of thermodynamic conditions, the decay time (τ) of the system dipole moment varies by a factor of about 30 and 1.5, as a function of temperature and density, respectively. At 300 K, we observed a maximum in τ as a function of density, and a corresponding shallow maximum in the tetrahedral order parameter, in a range where the diffusion coefficient, the pressure and the dielectric constant increase monotonically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Solvent Quality on Structure and Dynamics of Lignin in Solution

The conversion of lignin into useful chemicals and monomers requires that different linkages connecting monomers are exposed to the catalytic sites. As most conversion processes are expected to occur in the liquid phase, it is important to understand the structure and dynamics of lignin in solution. Here, we have examined the structure and dynamics of hardwood- and softwood-derived lignin model compounds with 61 monomers in methanol/water solution.

09 BIOMASS FUELS↗

What is the effect of lipophilic polymeric ionic liquids on friction and wear?

In this work, methacrylate-type ionic liquid (IL) monomers containing a quaternary ammonium cation and two different counter-anions were synthesized and used as co-monomers to obtain functional poly(alkyl methacrylates) (PAMAs) as friction and wear reducing additives for lubricants. The effect of molecular weight, polymer topology (random or diblock), and IL counter anion on friction and wear behavior of polymer PAO (poly-alpha olefin) solutions have been investigated. The results were compared to those of PAO solutions additized with a small molecule, non-polymeric ionic liquid, or non-ionic copolymers containing 2-(dimethylamino)ethyl methacrylate (DMAEMA) as the polar comonomer. No clear correlation between polymer molecular weight and friction or wear behavior was observed. Random ionic liquid copolymers led to lower wear volumes than their block counterparts. Polymers containing dicyanamide (DCA) counter anion showed lower wear volume compared to those containing bis((trifluoromethyl)sulfonyl)imide (TFSI) anion. Surprisingly, none of the IL copolymers studied outperformed the DMAEMA containing block copolymer in terms of wear volume reduction, suggesting the IL moiety had no beneficial effect on wear.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supercritical Treatment Technology for Water Purification (Annual Final Report)

This project continued the development of the Supercritical Water Extraction – Enhanced Targeted Recovery (SWEETR™) technology, a novel desalination process for treating hypersaline brines. The overall objective is to demonstrate the technical and economic feasibility of an innovative, energy efficient, and robust supercritical desalination technology to treat hypersaline solutions and separating saltwater into a pure water stream and valuable recovered solids, resulting in zero liquid discharge (ZLD). The proposed technology, focuses on innovative methods of applying supercritical water to treat highly concentrated brine solutions without incurring a high energy penalty. Integrating the technology with solar energy reduces the energy cost for the system. The results obtained during the proof-of-concept testing demonstrate that the SWEETR™ concept is technically feasible and that supercritical water treatment is a viable option with strong merit for treating high salinity waters. The strategic design of the system provides the opportunity to localize the supercritical zone, which helps reduce the overall energy cost associated with the desalination process. The process can be tuned to remove only the amount of salts required to make the treated water “fit for purpose”, providing further opportunities to minimize energy costs. The ability to destroy organic compounds associated with the water while simultaneously being able to desalinate makes SWEETR™ uniquely fitted for treating aqueous streams such as produced water from oil and gas extraction which contain small amounts of organics. Such mixed contaminant streams pose an extreme challenge for other treatment options. Future work will further develop the SWEETR™ technology to take it from the bench-scale to the pilot-scale, and ready the technology for commercial application.

04 OIL SHALES AND TAR SANDS↗

Nanoparticle preparation of Mefenamic acid by electrospray drying

Nanoparticles preparation of Mefenamic acid (MA) by using an electrospray drying method was conducted in this study. Electrospray drying is a process that uses electrostatic force to disperse a conductive liquid stream into fine charged droplets through the coulomb fission of charges in the liquid and finally dry into fine particles. Electrospray drying modes operation usually in Taylor cone jet, and it was formed by controlling applied voltage and liquid flow rate. A conductive liquid (2.77–8.55μScm{sup −1}) which is MA solution was prepared by using acetone with concentration 0.041 and 0.055 M before pumping at a flow rate of 3–6ml/h. By applying the applied voltage at 1.3–1.5 kV, Taylor cone jet mode was formed prior to the electrospray. During electrospray drying process, solvent evaporation from the droplet was occurring that leads to coulomb disruption and may generate to nanoparticles. The dried nanoparticles were collected on a grounded substrate that was placed at varying distance from the electrospray. MA particle with size range of 100–400 nm were produced by electrospray drying process. Characterization of particles by using X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) show that particles formed into polymorph I.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A thermodynamic analysis of native point defect and dopant solubilities in zinc-blende III-V semiconductors

A thermodynamic model is used to analyze available experimental data relevant to point defects in the binary zinc-blende III-V compounds (Ga,In)-(P,As,Sb). The important point defects and their complexes in each of the materials are identified and included in the model. Essentially all of the available experimental data on dopant solubility, crystal density, and lattice parameter of melt and solution grown crystals and epilayers are reproduced by the model. It extends an earlier study [Hurle, J. Appl. Phys. 85, 6957 (1999)] devoted solely to GaAs. Values for the enthalpy and entropy of formation of both native and dopant related point defects are obtained by fitting to experimental data. In undoped material, vacancies, and interstitials on the Group V sublattice dominate in the vicinity of the melting point (MP) in both the phosphides and arsenides, whereas, in the antimonides, vacancies on both sublattices dominate. The calculated concentrations of the native point defects are used to construct the solidus curves of all the compounds. The charged native point defect concentrations at the MP in four of the six materials are significantly higher than their intrinsic carrier concentrations. Thus the usually assumed high temperature 'intrinsic' electroneutrality condition for undoped material (n=p) is not valid for these materials. In GaSb, the Ga{sub Sb} antisite defect appears to be grown-in from the melt. This contrasts with the As{sub Ga} defect in GaAs for which the concentration grown-in at the MP is negligibly small. Compensation of donor-doped material by donor-Group III vacancy complexes is shown to exist in all the compounds except InP where Group VI doped crystals are uncompensated and in InSb where there is a lack of experimental data. The annealing effects in n{sup +} GaAs, including lattice superdilation, which were shown in the earlier paper to be due to Group III vacancy undersaturation during cooling, are found to be present also in GaSb and InAs. Results for native point defects are compared with reported ''first principles'' calculations for GaAs. It is seen that, while there is some accord with experimental findings for low temperature molecular beam epitaxial (MBE) growth, they fail totally to predict the behavior under high temperature growth conditions. The analysis of data on liquid phase epitaxy (LPE) growth of GaAs from Bi solution in the earlier paper has been re-calculated in the light of experimental data that showed that the model used in that paper to represent the Ga-As-Bi phase equilibria was inadequate. An improved model reveals that Ga vacancies exert a greater effect in controlling the extent of the linear range of donor dopant solubility than previously predicted. It has also led to a re-evaluation of the equilibrium EL2 and Ga vacancy concentrations in GaAs during MBE growth under As-rich conditions at low temperatures ({approx}500 K). The amended model predicts that the very high concentrations of EL2 and of Ga vacancies observed experimentally are near equilibrium values. The predicted increase in the equilibrium concentrations of these defects at low temperatures results from coulombic attraction between the two defects. At temperatures somewhat lower than 500 K the rate of increase becomes catastrophic.

36 MATERIALS SCIENCE↗

Critical point analysis of phase envelope diagram

Phase diagram or phase envelope is a relation between temperature and pressure that shows the condition of equilibria between the different phases of chemical compounds, mixture of compounds, and solutions. Phase diagram is an important issue in chemical thermodynamics and hydrocarbon reservoir. It is very useful for process simulation, hydrocarbon reactor design, and petroleum engineering studies. It is constructed from the bubble line, dew line, and critical point. Bubble line and dew line are composed of bubble points and dew points, respectively. Bubble point is the first point at which the gas is formed when a liquid is heated. Meanwhile, dew point is the first point where the liquid is formed when the gas is cooled. Critical point is the point where all of the properties of gases and liquids are equal, such as temperature, pressure, amount of substance, and others. Critical point is very useful in fuel processing and dissolution of certain chemicals. Here in this paper, we will show the critical point analytically. Then, it will be compared with numerical calculations of Peng-Robinson equation by using Newton-Raphson method. As case studies, several hydrocarbon mixtures are simulated using by Matlab.

36 MATERIALS SCIENCE↗

Lessons Learned with Metallized Gelled Propellants

During testing of metallized gelled propellants in a rocket engine, many changes had to be made to the normal test program for traditional liquid propellants. The lessons learned during the testing and the solutions for many of the new operational conditions posed with gelled fuels will help future programs run more smoothly. The major factors that influenced the success of the testing were propellant settling, piston-cylinder tank operation, control of self pressurization, capture of metal oxide particles, and a gelled-fuel protective layer. In these ongoing rocket combustion experiments at the NASA Lewis Research Center, metallized, gelled liquid propellants are used in a small modular engine that produces 30 to 40 lb of thrust. Traditional liquid RP-1 and gelled RP-1 with 0-, 5-, and 55-wt% loadings of aluminum are used with gaseous oxygen as the oxidizer. The figure compares the thrust chamber efficiencies of different engines.

Source record↗

Peculiarities of Phase Transformations of Polymer Solutions in Deformable Porous Matrices

Methods of equilibrium chemical thermodynamics have been used to simulate laws of the influence of geometric factors (pore shape and volume) on the phase equilibria is stratifying polymer solutions in porous matrices. Using the example of the phase separation in a liquid polybutadiene–polystyrene system, it is established that deformation of the porous matrix determining the geometric characteristics of pores can be used to control the mutual solubilities of components and the volumes and thermodynamic stability of coexisting equilibrium phases. Significant deformations of the matrix lead to suppression of the phase separation in pores and make any solution compositions possible (up to equimolar mixtures).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nitric-acid hydrolysis of Miscanthus giganteus to sugars fermented to bioethanol

Miscanthus giganteus ( M. giganteus ) is a promising feedstock for the production of bioethanol or biochemicals. Using only dilute nitric acid, this work describes a two-step process for hydrolyzing hemicellulose and cellulose to fermentable sugars. Primary variables were temperature and reaction time. The solid-to-liquid mass ratio was 1:8. No enzymes were used. In the first step, M. giganteus was contacted with 0.5 wt.% nitric acid at temperatures between 120 and 160°C for 5 to 40 min. The second step used 0.5 or 0.75 wt.% nitric acid at temperatures between 180 and 210°C for less than 6 min. Under selected conditions, almost all hemicellulose and 58% cellulose were transferred to the liquid phase. Small amounts of degradation products were observed. The xylose solution obtained from the nitric-acid hydrolysis was fermented for 96 h and the glucose solution for 48 h to yield 0.41 g ethanol/g xylose and 0.46 g ethanol/g glucose. To characterize residual solids and the liquor from both steps, nuclear-magneticresonance (NMR) spectroscopy was performed for each fraction. In conclusion, the analytical data indicate that the liquid phase from Steps 1 and 2 contain little lignin or lignin derivatives.

09 BIOMASS FUELS↗

EFFECTIVE POROSITY IMPLIES EFFECTIVE BULK DENSITY IN SORBING SOLUTE TRANSPORT

The concept of an effective porosity is widely used in solute transport modeling to account for the presence of a fraction of the medium that effectively does not influence solute migration, apart from taking up space. This non-participating volume or ineffective porosity plays the same role as the gas phase in single-phase liquid unsaturated transport: it increases pore velocity, which is useful towards reproducing observed solute travel times. The prevalent use of the effective porosity concept is reflected by its prominent inclusion in popular texts, e.g., de Marsily (1986), Fetter (1988, 1993) and Zheng and Bennett (2002). The purpose of this commentary is to point out that proper application of the concept for sorbing solutes requires more than simply reducing porosity while leaving other material properties unchanged. More specifically, effective porosity implies the corresponding need for an effective bulk density in a conventional single-porosity model. The reason is that the designated non-participating volume is composed of both solid and fluid phases, both of which must be neglected for consistency. Said another way, if solute does not enter the ineffective porosity then it also cannot contact the adjoining solid. Conceptually neglecting the fluid portion of the non-participating volume leads to a lower (effective) porosity. Likewise, discarding the solid portion of the non-participating volume inherently leads to a lower or effective bulk density. In the author's experience, practitioners virtually never adjust bulk density when adopting the effective porosity approach.

99 GENERAL AND MISCELLANEOUS↗

Machine Learning-Driven Solvent Screening for Biobased 2,3-Butanediol Extraction

Biobased 2,3-butanediol (2,3-BDO) is a valuable biomass-derived chemical due to its versatility in being transformed into a wide variety of products. However, the separation and purification of 2,3-BDO from fermentation broth remain a significant challenge owing to its high boiling point and hydrophilic nature. Herein, we developed a machine learning (ML)-based screening workflow that uses molecular calculations as training data and requires only a small number of experimental measurements for validation to identify alternative solvent candidates for the liquid–liquid extraction (LLE) of 2,3-BDO from aqueous solution. In particular, 130 density functional theory (DFT) calculations with the implicit solvation method not only built a correlation between the computational partition coefficient and the experimental distribution coefficient of 2,3-BDO but also parameterized an Extra-Trees ML model to screen the distribution coefficient for a wider range of 6717 organic solvents. The experimental measurements of only 24 solvents were needed to validate the computational results. A list of 50 prioritized solvents was proposed for 2,3-BDO LLE, and seven additional experimental measurements were conducted to further verify our selected solvents. The impact of the extraction temperature and solvent-to-feed ratio was also investigated for selected solvents in experiments. Furthermore, this work suggested alternative solvents for 2,3-BDO LLE and proposed a versatile workflow that requires fewer experiments and can be applied to a broader range of LLE studies.

Extraction↗

Interaction of Sr-90 with site candidate soil for demonstration disposal facility at Serpong

Interaction of radiostrontium (Sr-90) with site candidate soil for demonstration disposal facility to be constructed in the near future at Serpong has been done. This activity is to anticipate the interim storage facility at Serpong nuclear area becomes full off condition, and show to the public how radioactive waste can be well managed with the existing technology. To ensure that the location is save, a reliability study of site candidate soil becomes very importance to be conducted through some experiments consisted some affected parameters such as contact time, effect of ionic strength, and effect of Sr{sup +} ion in solution. Radiostrontium was used as a tracer on the experiments and has role as radionuclide reference in low-level radioactive waste due to its long half-live and it's easy to associate with organism in nature. So, interaction of radiostrontium and soil samples from site becomes important to be studied. Experiment was performed in batch method, and soil sample-solution containing radionuclide was mixed in a 20 ml of PE vial. Ratio of solid: liquid was 10{sup −2} g/ml. Objective of the experiment is to collect the specific characteristics data of radionuclide sorption onto soil from site candidate. Distribution coefficient value was used as indicator where the amount of initial and final activities of radiostrontium in solution was compared. Result showed that equilibrium condition was reached after contact time 10 days with Kd values ranged from 1600-2350 ml/g. Increased in ionic strength in solution made decreased of Kd value into soil sample due to competition of background salt and radiostrontium into soil samples, and increased in Sr ion in solution caused decreased of Kd value in soil sample due to limitation of sorption capacity in soil samples. Fast condition in saturated of metal ion into soil samples was reached due to a simple reaction was occurred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precision metering of microliter volumes of biological fluids in micro-gravity

Concepts were demonstrated and investigated for transferring accurately known and reproducible microliter volumes of biological fluids from sample container onto dry chemistry slides in microgravity environment. Specific liquid transfer tip designs were compared. Information was obtained for design of a liquid sample handling system to enable clinical chemical analysis in microgravity. Disposable pipet tips and pipet devices that were designed to transfer microliter volumes of biological fluid from a (test tube) sample container in 1-G environment were used during microgravity periods of parabolic trajectories of the KC-135 aircraft. The transfer process was recorded using charge coupled device camera and video cassette equipment. Metering behavior of water, a synthetic aqueous protein solution, and anticoagulated human blood was compared. Transfer of these liquids to 2 substrate materials representative of rapidly wettable and slowly wettable dry chemistry slide surface was compared.

Columbus, Richard L.↗

Molecular-level Design of Heterogeneous Chiral Catalysts

Understanding and controlling selectivity is one of the key challenges in heterogeneous catalysis. Among problems in catalytic selectivity enantioselectivity is perhaps the most the most challenging. The primary goal of the project on “Molecular-level Design of Heterogeneous Chiral Catalysts” is to understand the origins of enantioselectivity on chiral heterogeneous surfaces and catalysts. The efforts of the project team include preparation of chiral surfaces, characterization of chiral surfaces, experimental detection of enantioselectivity on such surfaces and computational modeling of the interactions of chiral probe molecules with chiral surfaces. Over the course of the project period the team of PI’s has made some of the most detailed and insightful studies of enantioselective chemistry on chiral surfaces. This includes the measurement of fundamental interactions and reaction mechanisms of chiral molecules on chiral surfaces and leads all the way to rationale design and synthesis of chiral surfaces and materials for enantioselective surface chemistry. The PI’s have designed and prepared new materials for enantioselective adsorption and catalysis. Naturally Chiral Surfaces • Completion of a systematic study of the enantiospecific desorption kinetics of R-3-methylcyclohexanone (R-3-MCHO) on 9 achiral and 7 enantiomeric pairs of chiral Cu surfaces with orientations that span the stereographic triangle. • Discovery of super-enantioselective tartaric acid (TA) and aspartic acid (Asp) decomposition as a result of a surface explosion mechanism on Cu(643)R&S. Systematic study of super-enantiospecific TA and Asp decomposition on five enantiomeric pairs of chiral Cu surfaces. • Initial observation of the enantiospecific desorption of R- and S-propylene oxide (PO) from Cu(100) imprinted with {3,1,17} facets by L-lysine adsorption. Templated Chiral Surfaces • Initial observation of the enantiospecific desorption of R- and S-PO from Pt(111) and Pd(111) modified by a variety of chiral templates. • Demonstrated enantioselective separation of racemic PO on chemically synthesized chiral gold nanoparticles. • Discovery of zwitterionic adsorption states of amino acids on Pd(111). • First structure determinations of adsorbed amino acids and identification of tetrameric chiral template structures. • Exploration of the enantiospecific interaction of PO and R-3-MCHO adsorption on chirally modified Cu(100), Cu(110) and Cu(111). One-to-One Interactions • Determination of cinchona orientation on Pt surfaces in situ at the solid-liquid interface using FT-IRAS. • Systematic study of the influence of solution properties on the adsorption of modified cinchonas alkaloids onto Pt surfaces. • Correlation of cinchona adsorption with catalytic activity, as affected by concentration, the nature of the solvent, and dissolved gases in the liquid phase. • Measurement of enantioselective chemisorption on 1-(1-naphthyl) ethylamine (NEA) modified Pt(111) and Pd(111) surfaces. • Imaging of chiral docking complexes between NEA and methyl pyruvate on Pd(111). Chiral Catalyst Synthesis • Anchoring of cinchona alkaloid to surfaces • Synthesis of chiral Au nanoparticles and demonstration of their enantiospecific interactions with R- and S-PO. • Elucidation of the driving forces for chiral imprinting of Cu(100) by L- and D-lysine to form Cu(3,1,17)R&S facets.

36 MATERIALS SCIENCE↗