Search NASA⌕ Search

SEARCH · Search NASA

Results for “mixture experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Explosion-induced ignition and combustion of acetylene clouds

We investigate the explosion-induced ignition and combustion of an acetylene cloud in a rectangular chamber (10 cm × 10 cm × 39 cm). In the experiments, a 0.2-g PETN charge was located at $x = 9.7\,\hbox {cm}$ and a soap bubble (d=5cm) filled with pure acetylene was located at $x = 27\,\hbox {cm}$ as measured relative to the end wall. Detonation of the charge created a blast wave that crushed the soap bubble—inducing mixing with the air. After 0.55 ms, the mixture ignited, forming at turbulent combustion cloud. The flow was modeled using the compressible Navier–Stokes equations assuming unity Lewis number. Arrhenius-based kinetics were used to model ignition. Adaptive mesh refinement was used to capture turbulent mixing on the grid (the MILES approach of J. Boris). Computed pressures were found to be in agreement with measured pressure histories. Finite-rate kinetics were required to capture the ignition processes over the duration of the experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Semiconducting cubic titanium nitride in the Th 3 P 4 structure

We report the discovery of a long-sought-after phase of titanium nitride with stoichiometry Ti3N4 using diamond anvil cell experiments combined with in situ high-resolution x-ray diffraction and Raman spectroscopy techniques, supported by ab initio calculations.

14 SOLAR ENERGY↗
DOE OSTI2021

An experimental and kinetic modeling study of NO x sensitization on methane autoignition and oxidation

An experimental and kinetic modeling study of the influence of NO x (i.e. NO 2 , NO and N 2 O) addition on the ignition behavior of methane/‘air’ mixtures is performed. Ignition delay time measurements are taken in a rapid compression machine (RCM) and in a shock tube (ST) at temperatures and pressures ranging from 900–1500 K and 1.5–3.0 MPa, respectively for equivalence ratios of 0.5–2.0 in ‘air’. The conditions chosen are relevant to spark ignition and homogeneous charge compression ignition engine operating conditions where exhaust gas recirculation can potentially add NO x to the premixed charge. The RCM measurements show that the addition of 200 ppm NO 2 to the stoichiometric CH 4 /oxidizer mixture results in a factor of three increase in reactivity compared to the baseline case without NOx for temperatures in the range 600–1000 K. However, adding up to 1000 ppm N 2 O does not show any appreciable effect on the measurements. The promoting effect of NO 2 was found to increase with temperature in the range 950–1150 K, while the sensitization effect decreases at higher pressures. The experimental results measured are simulated using NUIGMech1.2 comprising an updated NO x sub-chemistry in this work. A kinetic analysis indicates that the competition between the reactions ĊH 3 + NO 2 ↔ CH 3 Ȯ + NO and ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), the former being a propagation reaction and the latter being a termination reaction governs NO x sensitization on CH 4 ignition. Recent calculations by Matsugi and Shiina (A. Matsugi, H. Shiina, J. Phys. Chem. A. 121 (2017) 4218–4224) for the nitromethane formation reaction CH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), together with the recently calculated rate constants for HONO/HNO 2 reactions significantly improve ignition delay time predictions in the temperature range 600–1000 K. Furthermore, the experiments with NO addition reveal a non-monotonous sensitization impact on CH 4 ignition at lower temperatures with NO initially acting as an inhibitor at low NO concentrations and then as a promoter as NO concentrations increase in the mixture. This non-monotonous trend is attributed to the role of the chain-termination reaction ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M) and the impact of NO on the transition to the chain-branching steps CH 2 O + HȮ 2 ↔ HĊO + H 2 O 2 , H 2 O 2 (+M) ↔ ȮH + ȮH (+M), HĊO ↔ CO + Ḣ followed by CO + O 2 ↔ CO 2 + Ö and Ḣ + O 2 ↔ Ö + ȮH. NUIGMech1.2 is systematically validated against the new ignition delay measurements taken here together with species measurements and high temperature ignition delay time data available in the literature for CH 4 /oxidizer mixtures diluted with NO 2 /N 2 O/NO and is observed to accurately capture the sensitization trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2019

Prebiotic Chemistry of Pluto

We present the case for the presence of complex organic molecules, such as amino acids and nucleobases, formed by abiotic processes on the surface and in near-subsurface regions of Pluto. Pluto's surface is tinted with a range of non-ice substances with colors ranging from light yellow to red to dark brown; the colors match those of laboratory organic residues called tholins. Tholins are broadly characterized as complex, macromolecular organic solids consisting of a network of aromatic structures connected by aliphatic bridging units (e.g., Imanaka et al.,2004; Materese et al.,2014, 2015). The synthesis of tholins in planetary atmospheres and in surface ices has been explored in numerous laboratory experiments, and both gas- and solid-phase varieties are found on Pluto. A third variety of tholins, exposed at a site of tectonic surface fracturing called Virgil Fossae, appears to have come from a reservoir in the subsurface. Eruptions of tholin-laden liquid H2O from a subsurface aqueous repository appear to have covered portions of Virgil Fossae and its surroundings with a uniquely colored deposit (D.P. Cruikshank, personal communication) that is geographically correlated with an exposure of H2O ice that includes spectroscopically detected NH3 (C.M. Dalle Ore, personal communication). The subsurface organic material could have been derived from presolar or solar nebula processes, or might have formed in situ. Photolysis and radiolysis of a mixture of ices relevant to Pluto's surface composition (N2, CH4, CO) have produced strongly colored, complex organics with a significant aromatic content having a high degree of nitrogen substitution similar to the aromatic heterocycles pyrimidine and purine (Materese et al.,2014, 2015; Cruikshank et al.,2016). Experiments with pyrimidines and purines frozen in H2O-NH3 ice resulted in the formation of numerous nucleobases, including the biologically relevant guanine, cytosine, adenine, uracil, and thymine (Materese et al.,2017). The red material associated with the H2O ice may contain nucleobases resulting from energetic processing on Pluto's surface or in the interior. Some other Kuiper Belt objects also exhibit red colors similar to those found on Pluto and may therefore carry similar inventories of complex organic materials. The widespread and ubiquitous nature of similarly complex organic materials observed in a variety of astronomical settings drives the need for additional laboratory and modeling efforts to explain the origin and evolution of organic molecules. Pluto observations reveal complex organics on a small body that remains close to its place of origin in the outermost regions of the Solar System.

Cruikshank, D. P.↗
DOE OSTI2023

RB-TnSeq identifies genetic targets for improved tolerance of Pseudomonas putida towards compounds relevant to lignin conversion

We report lignin-derived mixtures intended for bioconversion commonly contain high concentrations of aromatic acids, aliphatic acids, and salts. The inherent toxicity of these chemicals places a significant bottleneck upon the effective use of microbial systems for the valorization of these mixtures. Pseudomonas putida KT2440 can tolerate stressful quantities of several lignin-related compounds, making this bacterium a promising host for converting these chemicals to valuable bioproducts. Nonetheless, further increasing P. putida tolerance to chemicals in lignin-rich substrates has the potential to improve bioprocess performance. Accordingly, we employed random barcoded transposon insertion sequencing (RB-TnSeq) to reveal genetic determinants in P. putida KT2440 that influence stress outcomes during exposure to representative constituents found in lignin-rich process streams. The fitness information obtained from the RB-TnSeq experiments informed engineering of strains via deletion or constitutive expression of several genes. Namely, ΔgacAS, ΔfleQ, ΔlapAB, ΔttgR::P tac :ttgABC, Ptac:PP_1150:PP_1152, ..delta..relA, and ΔPP_1430 mutants showed growth improvement in the presence of single compounds, and some also exhibited greater tolerance when grown using a complex chemical mixture representative of a lignin-rich chemical stream. Overall, this work demonstrates the successful implementation of a genome-scale screening tool for the identification of genes influencing stress tolerance against notable compounds within lignin-enriched chemical streams, and the genetic targets identified herein offer promising engineering targets for improving feedstock tolerance in lignin valorization strains of P. putida KT2440.

09 BIOMASS FUELS↗
DOE OSTI2014

Rotational relaxation in molecular hydrogen and deuterium: Theory versus acoustic experiments

An explicit formulation of the rotational relaxation time in terms of state-to-state rate coefficients associated to inelastic collisions is reported. The state-to-state rates needed for the detailed interpretation of relaxation in H{sub 2} and D{sub 2}, including isotopic variant mixtures, have been calculated by solving the close-coupling Schrödinger equations using the H{sub 2}–H{sub 2} potential energy surface by Diep and Johnson [J. Chem. Phys. 112, 4465 (2000)]. Relaxation related quantities (rotational effective cross section, bulk viscosity, relaxation time, and collision number) calculated from first principles agree reasonably well with acoustic absorption experimental data on H{sub 2} and D{sub 2} between 30 and 293 K. This result confirms at once the proposed formulation, and the validation of the H{sub 2}–H{sub 2} potential energy surface employed, since no approximations have been introduced in the dynamics. Accordingly, the state-to-state rates derived from Diep and Johnson potential energy surface appear to be overestimated by up to 10% for H{sub 2}, and up to 30% for D{sub 2} at T = 300 K, showing a better agreement at lower temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Mechanical properties of refractory high-entropy alloys: Experiments and modeling

Refractory high-entropy alloys hold the potential for high-temperature applications beyond the capability of the state-of-the-art Ni-based superalloys, and thus, it is important to study their solid solution formation characteristics and mechanical properties. In this study, designed by CALPHAD method, formation of as-cast arc-melted body-centered cubic MoNbTaTiV was experimentally verified using X-ray diffraction and scanning electron microscopy. The measured density and lattice parameter for MoNbTaTiV are 9.29 g/cm3 and 3.224 Å, which obey the rule of mixtures (ROM). The alloy exhibits high hardness at 443 Hv, high yield strength at 1.4 GPa, and good compressive fracture strength at 2.45 GPa with a fracture strain of ~30% at room temperature. The yield strength and hardness values of this alloy, and other single-phase refractory high-entropy alloys, are estimated using a simple model of solid solution strengthening. Reasonable agreement between modeling prediction and experiments is obtained. In addition, first-principles density functional theory calculations predict an enthalpy of formation of -0.865 kJ/mol for the MoNbTaTiV alloy, with calculated atomic volume and elastic properties (e.g., bulk and elastic moduli) obeying the ROM.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Surface Crust Formation Controls Evaporation Kinetics of Secondary Organic Aerosols

Gas-particle partitioning is critical for the evolution of secondary organic aerosols (SOA) in the atmosphere. SOA particles evaporate more slowly than expected at nearly size-independent rates, but the underlying mechanism remains controversial. Here, in this study, we apply kinetic multilayer modeling to simulate evaporation of α-pinene SOA, demonstrating that surface crust formation, emerging from accumulation of low-volatility compounds at the particle surface, leads to slow evaporation and reduced size dependence of the evaporation rate. While evaporation induced by decomposition of oligomers would naturally lead to size-independent evaporation rates, we observe and simulate nearly size-independent slow evaporation of polyethylene glycol mixture particles containing polymeric species that do not decompose, confirming the relevance of composition-dependent diffusivity for size-independent, slow evaporation. Slow evaporation of limonene SOA was also observed in environmental chamber experiments, and model simulations demonstrate strong surface crust formation with bulk diffusivity being depressed by up to 5 orders of magnitude compared to the inner bulk. We present experimental evidence using a surface-based mass spectrometry technique that shows that the particle surface becomes enriched in high molecular weight compounds upon evaporation of monomers. Our findings imply that viscous surface crusts may also limit the growth and chemical transformation of SOA particles, influencing their impacts on air quality and climate.

heterogeneous chemistry↗
DOE OSTI2015

Designing Free Energy Surfaces That Match Experimental Data with Metadynamics

Creating models that are consistent with experimental data is essential in molecular modeling. This is often done by iteratively tuning the molecular force field of a simulation to match experimental data. An alternative method is to bias a simulation, leading to a hybrid model composed of the original force field and biasing terms. Previously we introduced such a method called experiment directed simulation (EDS). EDS minimally biases simulations to match average values. We also introduce a new method called experiment directed metadynamics (EDM) that creates minimal biases for matching entire free energy surfaces such as radial distribution functions and phi/psi angle free energies. It is also possible with EDM to create a tunable mixture of the experimental data and free energy of the unbiased ensemble with explicit ratios. EDM can be proven to be convergent, and we also present proof, via a maximum entropy argument, that the final bias is minimal and unique. Examples of its use are given in the construction of ensembles that follow a desired free energy. Finally, the example systems studied include a Lennard-Jones fluid made to match a radial distribution function, an atomistic model augmented with bioinformatics data, and a three-component electrolyte solution where ab initio simulation data is used to improve a classical empirical model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Density Functional Tight-Binding Simulations Reveal the Presence of Surface Defects on the Quartz (101)–Water Interface

Understanding the structure and reactivity of quartz–water interfaces is critical for numerous applications in the geological, environmental, and biological sciences. However, disagreements on the atomic-level structure of the interfaces between experiments and simulations are hampering our ability to predict the surface reactivity. Here, we used density functional tight-binding (DFTB)-based molecular dynamics to simulate a series of quartz (101) surfaces having different types and densities of surface defects in water and compared them with the structures determined by X-ray reflectivity measurements. The DFTB simulations are able to reproduce previous classical and quantum mechanical predictions of the pristine quartz (101)–water interface that disagree with experimental observations. To remedy this situation, a set of defective quartz surfaces having various surface silicon (Si) vacancies were built as indicated by recent experimental studies. We found that the rotation of surface [SiO 4 ] tetrahedra near Si vacancies can lead to outward displacements of Si atoms similar to those observed in the experiments. The presence of additional surface Si vacancies caused inward relaxations of terminal oxygens through the formation of hydrogen bonds. Finally, the overall results indicate that the quartz (101)–water interface may include a mixture of geminal (≡Si–(OH) 2 )- and vicinal (≡Si–OH)-type silanol groups together with the presence of surface Si vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Corium lavas: structure and properties of molten UO 2 -ZrO 2 under meltdown conditions

In the exceedingly rare event of nuclear reactor core meltdown, uranium dioxide fuel reacts with Zircaloy cladding to produce eutectic melts which can subsequently be oxidized by coolant/moderator water. Oxidized corium liquids in the xUO 2 ·(100 – x)ZrO 2 system were produced via laser melting of UO 2 -ZrO 2 mixtures to temperatures in excess of 3000 K. Contamination was avoided by floating the droplets on a gas stream within an aerodynamic levitator and in-situ high-energy x-ray diffraction experiments allowed structural details to be elucidated. Molecular dynamics simulations well reproduced diffraction and density data, and show less compositional variation in thermal expansion and viscosity than suggested by existing measurements. As such, corium liquids maintain their highly penetrating nature irrespective of the amount of oxidized cladding dissolved in the molten fuel. Metal-oxygen coordination numbers vary with both composition and temperature. The former is due to mismatch in native values, n UO (x = 100) ≈ 7 and n ZrO (x = 0) ≈ 6, and the requirement for oxygen site stabilization. Furthermore, the latter provides a thermal expansion mechanism.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Defects and properties of cadmium oxide based transparent conductors

Transparent conductors play an increasingly important role in a number of semiconductor technologies. This paper reports on the defects and properties of Cadmium Oxide, a transparent conducting oxide which can be potentially used for full spectrum photovoltaics. We carried out a systematic investigation on the effects of defects in CdO thin films undoped and intentionally doped with In and Ga under different deposition and annealing conditions. We found that at low growth temperatures (<200 °C), sputter deposition tends to trap both oxygen vacancies and compensating defects in the CdO film resulting in materials with high electron concentration of ∼2 × 10{sup 20}/cm{sup 3} and mobility in the range of 40–100 cm{sup 2}/V s. Thermal annealing experiments in different ambients revealed that the dominating defects in sputtered CdO films are oxygen vacancies. Oxygen rich CdO films grown by sputtering with increasing O{sub 2} partial pressure in the sputter gas mixture results in films with resistivity from ∼4 × 10{sup −4} to >1 Ω cm due to incorporation of excess O in the form of O-related acceptor defects, likely to be O interstitials. Intentional doping with In and Ga donors leads to an increase of both the electron concentration and the mobility. With proper doping CdO films with electron concentration of more than 10{sup 21 }cm{sup −3} and electron mobility higher than 120 cm{sup 2}/V s can be achieved. Thermal annealing of doped CdO films in N{sub 2} ambient can further improve the electrical properties by removing native acceptors and improving film crystallinity. Furthermore, the unique doping behavior and electrical properties of CdO were explored via simulations based on the amphoteric defect model. A comparison of the calculations and experimental results show that the formation energy of native donors and acceptors at the Fermi stabilization energy is ∼1 eV and that the mobility of sputtered deposited CdO is limited by a background acceptor concentration of ∼5–6 × 10{sup 20}/cm{sup 3}. The calculations offer an insight into understanding of the effects of defects on electrical properties of undoped and doped CdO and offer a potential to use similar methods to analyze doping and defect properties of other semiconductor materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Fundamental chemical physics revealed by scattering reactive open-shell atoms from surfaces

The dynamics of reactive atoms at surfaces are centrally important to areas such as heterogeneous catalysis, corrosion, materials degradation in extreme environments, and plasma etching. Remarkably detailed understanding of dynamical processes at surfaces has been extracted from scattering molecules and inert atoms under well-defined conditions. However, traditional techniques for generating beams of reactive atoms often result in impure mixtures, broad energy distributions, and poorly defined contributions of metastable electronically excited atoms. In this perspective article, we review the state-of-the-art in reactive atom surface scattering with a focus on experiments performed under controlled conditions on well-defined surfaces. We highlight a new technique for controlled state-to-state scattering of polyelectronic atoms from surfaces, based on vacuum ultraviolet photolysis and state-selective ion imaging. The new capabilities provide an avenue for research into the underexplored area of excited state and spin selective chemical dynamics at surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Corrosion of Rare-Earth Disilicate Environmental Barrier Coatings in Gas Turbine Environments—Part 2: Microstructure Model

A model for the volatization of ytterbium disilicate (YbDS) by water vapor is developed. The new model is based on the Deal & Grove theory of the thermal oxidation of silicon [1], generalized here to account for the multi-step, second-order chemical reactions for silica depletion, multi-component mixture effects, and the unsteady porous microstructural evolution of the corroded inner zone. With the new model, the fundamental kinetic rate and standard porous media parameters are determined using the atmospheric steam jet impingement experiment of Ridley & Opila [2] and compared to results from the original Deal & Grove model. Fixing the input parameters in each respective model, a validation study (blind prediction) is presented for the high Reynolds number (1 × 105) and high pressure (14.7 atm) burner rig experiment of Wan et al. [3].

Cha, Chong M [Rolls Royce]↗
DOE OSTI2020

Modeling Molten Salt Reactor Fission Product Removal with SCALE

Liquid-fuel Molten Salt Reactors (MSRs) allow for continuous online fuel treatment and processing using a variety of subsystems. Among these subsystems, the off-gas system (OGS) continuously removes fission products from the primary fuel salt through a helium sparging process. Accurately modeling fission product behavior is paramount for the development of MSRs; while there are a variety of depletion modeling and simulation tools that allow for removal of material from a defined system, most of them work in a semicontinuous, batch-wise manner. The new tools implemented into TRITON, in the SCALE suite for reactor analysis and design, aim to address this issue by implementing truly continuous material feeds and removals. In addition, material accountancy is enhanced in these tools, which enable tracking of removed material in user-specified mixtures. These continuous depletion tools provide a way to model material transport throughout systems more efficiently and accurately. This report validates the new SCALE MSR modeling capabilities using data from the Molten Salt Reactor Experiment (MSRE). After a framework was established for deriving realistic removal rates based on design specifications, these rates were used by TRITON to continuously remove specific elements while performing burnup calculations. Results were compared to those obtained in MSRE, with a focus on the 135 Xe poison fraction. After these capabilities were validated, the learned concepts and best practices were applied to model the Molten Salt Breeder Reactor (MSBR) and the Molten Salt Demonstration Reactor (MSDR) to study the effects of continuous fission product removal in fuel salt reactivity, as well as the lifetime effects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

FY2020 Annual Report on Subcontract B631779 with UC Berkeley: Reactive Precursors Additive Manufacturing Report

This work succeeded in reaching each of the stated milestones for developing, printing, reacting, and characterizing the uranium carbide final products. Leveraging experience gained from creating magnesium oxide inks (milestone #1) and prior reactive precursor work with boron carbide (milestone #2) a uranium carbide reactive precursor ink was developed. The chosen composition of ink utilized a mixture of wax, petrolatum, and stearic acid as the binder. The reactive precursor portion of the ink was comprised of uranium oxide and nano particle activated carbon for production of uranium carbide via carbothermal reduction. Following an in-air burnout of the binder at 160C the printed samples were reacted and sintered at 1750C in an argon environment induction furnace. The resulting product has an open porosity dense, foam-like internal structure with a calculated density of 89% in the solid fraction.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1981

The heavy nuclei experiment on HEAO-3

The HEAO-3 experiment to study the heavy and ultraheavy nuclei in cosmic radiation is described. The array is double-ended and consists of three main elements. Two pressure chambers, filled with an argon-methane mixture at about 850 torr, each contain two x-y hodoscopes made of wires spaced 1 cm apart and three parallel plate ionization chambers. Between the pressure chambers is mounted a Cerenkov counter composed of two layers of Pilot 425 radiator looked at by eight photomultipliers. The instrument is designed to achieve a charge resolution of 0.3 charge units over the charge range 17-120, which requires a measurement accurate to 0.6 percent at Z = 100. Examination of selected data shows that the instrument has the intrinsic resolution needed.

Binns, W. R.↗