Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Distribution of human waste samples in relation to sizing waste processing in space

Human waste processing for closed ecological life support systems (CELSS) in space requires that there be an accurate knowledge of the quantity of wastes produced. Because initial CELSS will be handling relatively few individuals, it is important to know the variation that exists in the production of wastes rather than relying upon mean values that could result in undersizing equipment for a specific crew. On the other hand, because of the costs of orbiting equipment, it is important to design the equipment with a minimum of excess capacity because of the weight that extra capacity represents. A considerable quantity of information that had been independently gathered on waste production was examined in order to obtain estimates of equipment sizing requirements for handling waste loads from crews of 2 to 20 individuals. The recommended design for a crew of 8 should hold 34.5 liters per day (4315 ml/person/day) for urine and stool water and a little more than 1.25 kg per day (154 g/person/day) of human waste solids and sanitary supplies.

Parker, Dick↗

Scientific Value of Including an Atmospheric Sample as Part of Mars Sample Return (MSR)

The Perseverance rover is meant to collect samples of the martian surface for eventual return to Earth. The headspace gas present over the solid samples within the sample tubes will be of significant scientific interest for what it reveals about the interactions of the solid samples with the trapped atmosphere and for what it will reveal about the martian atmosphere itself. However, establishing the composition of the martian atmosphere will require other dedicated samples. The headspace gas as the sole atmospheric sample is problematic for many reasons. The quantity of gas present within the sample tube volume is insufficient for many investigations, and there will be exchange between solid samples, headspace gas, and tube walls. Importantly, the sample tube materials and preparation were not designed for optimal Mars atmospheric gas collection and storage as they were not sent to Mars in a degassed evacuated state and have been exposed to both Earth's and Mars' atmospheres. Additionally, there is a risk of unconstrained seal leakage in transit back to Earth, which would allow fractionation of the sample (leak-out) and contamination (leak-in). The science return can be improved significantly (and, in some cases, dramatically) by adding one or more of several strategies listed here in increasing order of effectiveness and difficulty of implementation: (1) Having Perseverance collect a gas sample in an empty sample tube, (2) Collecting gas in a newly-designed, valved, sample-tube-sized vessel that is flown on either the Sample Fetch Rover (SFR) or the Sample Retrieval Lander (SRL), (3) Adding a larger (50-100 cc) dedicated gas sampling volume to the Orbiting Sample container (OS), (4) Adding a larger (50-100 cc) dedicated gas sampling volume to the OS that can be filled with compressed martian atmosphere.

Timothy D. Swindle↗

Mineralogical, optical, geochemical, and particle size properties of four sediment samples for optical physics research

X-ray diffraction and spectroscopy were used to investigate the mineralogical and chemical properties of the Calvert, Ball Old Mine, Ball Martin, and Jordan Sediments. The particle size distribution and index of refraction of each sample were determined. The samples are composed primarily of quartz, kaolinite, and illite. The clay minerals are most abundant in the finer particle size fractions. The chemical properties of the four samples are similar. The Calvert sample is most notably different in that it contains a relatively high amount of iron. The dominant particle size fraction in each sample is silt, with lesser amounts of clay and sand. The indices of refraction of the sediments are the same with the exception of the Calvert sample which has a slightly higher value.

Bice, K.↗

Revealing Three-Dimensional Morphology in Nanoporous Gold Using Three-Dimensional X-Ray Fresnel Coherent Diffractive Imaging Tomography

Nanoporous metals fabricated by dealloying have a unique bi-continuous, sponge-like porous structure with ultra-high surface area. The unique properties of these materials, especially nanoporous gold, have numerous potential applications in sensors and actuators and in energy-related applications such as catalytic materials, super-capacitors, and battery supports. The degree of porosity and size of the metal ligaments are critical parameters that determine many properties and thus govern the functionalities of nanoporous metals in many applications including energy storage and conversion. Additionally, we used Fresnel coherent diffractive imaging combined with tomographic reconstruction to quantify the nanoscale three-dimensional spatial distribution and homogeneity of the porosity and ligament size within a bulk sample of nanoporous gold. The average porosity and its standard deviation along the axial direction through the sample were determined, as well as the characteristic feature size and its standard deviation. The result shows that free corrosion is an effective way to create homogeneous nanoporous metals with sample sizes on the order of 1 µm.

36 MATERIALS SCIENCE↗

Guest-dependent high-pressure phenomena in a nanoporous metal-organic framework material.

The nanoporous metal?organic framework material Cu{sub 3}(1,3,5-benzenetricarboxylate){sub 2}(H{sub 2}O){sub 3} {center_dot} (guest) exhibits anomalous compression under applied pressure that is associated with the hyper-filling of the pore network. This behavior involves a dramatic transition between a 'hard' regime (bulk modulus, K{sub hard} {approx} 118 GPa), where the pressure-transmitting fluid penetrates the framework cavities, and a 'soft' regime (K{sub soft} {approx} 30 GPa), where the guest-framework system compresses concertedly. Not only is the duality in compressibility triggered by the availability of potential guests but the size/penetrability of the guest molecules determines the pressure at which the hard-soft transition occurs. Specifically, the observed compression behavior depends on the size of the pressure-transmitting fluid molecules, the sample particle size (i.e., the extent of the pore network), and the rate at which the pressure is increased. The unprecedented pressure-induced phenomena documented here, illustrates the exotic high-pressure behaviors possible in this versatile class of advanced functional materials with broad implications for their structure-function relationships and accordingly their practical application.

36 MATERIALS SCIENCE↗

He, Ne and Ar in chondritic Ni-Fe as irradiation hardness sensors.

Noble gas analyses of the Ni-Fe of 9 L, 5 H, and 2 LL chondrites quantitatively support previous suggestions of radiogenic He-4 recoil and He-3 deficits. Furthermore, noble gases in the Ni-Fe show evidence for in situ produced radiogenic He-4 and in some cases for recoil loss of Ar-38 and gain of Ne-21. The ratio of spallogenic Ar-38 and Ne-21 in the metal phase is found to correlate strongly with He-3/Ne-21 and Ne-22/Ne-21 in bulk samples of these chondrites. This is proof of the dependence of these ratios on the irradiation hardness experienced by the meteoroid in space. 'Hardness indices' n equals 1.9-2.2 are found, indicating that on the average the stone meteoroids from which the samples came were smaller in mass than iron meteoroids. The spallogenic Ne-21/Ar-38 ratio in metallic Ni-Fe can be used with the semi-empirical production model deduced from the Grant iron meteorite to calibrate spallogenic He-3/Ne-21 and Ne-21/Ar-38 in bulk samples of L, LL and H chondrites for meteoroid size and sample location allowing the estimation of minimal meteoroid masses.

Nyquist, L.↗

The dissection and consortium allocation of Apollo 17 lunar rocks from the boulder at station 7

The Apollo 17 astronauts removed four rocks samples to represent each of the lithologies they recognized in the boulder at station 7: sample 77215 from an off-white meter-sized block; sample 77075 from one of the thin dikes that cross the off-white block; 77115 from the blue-gray rock adjacent to the off-white block and apparently continuous with thin dikes that cross the block; sample 77135 of the tan-gray or green-gray vesicular rock adjacent to the blue-gray (77115) rock. A consortium of investigators has been organized to study the samples. Each sample shows a number of lithologic types in terms of clasts (or xenoliths) and matrices. A table shows how subsamples have been allocated for consortium study. Maps and photographs show the relations between subsample locations and lithologies for the two more dissected samples, 77115 and 77135.

Butler, P.↗

Ground truth crop proportion summaries for US segments, 1976-1979

The original ground truth data was collected, digitized, and registered to LANDSAT data for use in the LACIE and AgRISTARS projects. The numerous ground truth categories were consolidated into fewer classes of crops or crop conditions and counted occurrences of these classes for each segment. Tables are presented in which the individual entries are the percentage of total segment area assigned to a given class. The ground truth summaries were prepared from a 20% sample of the scene. An analysis indicates that this size of sample provides sufficient accuracy for use of the data in initial segment screening.

Horvath, R.↗

Estimation of irrigated land using Landsat digital data

Techniques developed by the University of California and NASA for the utilization of multitemporal Landsat digital data in estimating and mapping irrigated land are presented. Three dates of Landsat were registered to each other and to a USGS 7.5 minute quadrangle map base for approximately 1.9 million acres of land. Other data registered include county boundaries, land use stratification, and digitized ground data. To identify irrigated land, an indicator was used which consisted of the ratio of MSS Band 7 to MSS Band 5 (the 7/5 ratio). A threshold 7/5 irrigated land value was determined for each date, as actively growing land generally has a higher 7/5 ratio than other cover classes. An estimate of irrigated land was determined by Landsat classification with ground data, at a relative standard error of + or - 7.98% at the 95% confidence interval. Mapping evaluation reveals a 94% accuracy, a 7.4% omission rate, and a 6.3% commission rate. In addition, a sample unit size evaluation recommends a 1-1 1/2 square mile sample range.

Brown, C. E.↗

Airborne particulate matter in spacecraft

Acceptability limits and sampling and monitoring strategies for airborne particles in spacecraft were considered. Based on instances of eye and respiratory tract irritation reported by Shuttle flight crews, the following acceptability limits for airborne particles were recommended: for flights of 1 week or less duration (1 mg/cu m for particles less than 10 microns in aerodynamic diameter (AD) plus 1 mg/cu m for particles 10 to 100 microns in AD); and for flights greater than 1 week and up to 6 months in duration (0.2 mg/cu m for particles less than 10 microns in AD plus 0.2 mg/cu m for particles 10 to 100 microns in AD. These numerical limits were recommended to aid in spacecraft atmosphere design which should aim at particulate levels that are a low as reasonably achievable. Sampling of spacecraft atmospheres for particles should include size-fractionated samples of 0 to 10, 10 to 100, and greater than 100 micron particles for mass concentration measurement and elementary chemical analysis by nondestructive analysis techniques. Morphological and chemical analyses of single particles should also be made to aid in identifying airborne particulate sources. Air cleaning systems based on inertial collection principles and fine particle collection devices based on electrostatic precipitation and filtration should be considered for incorporation into spacecraft air circulation systems. It was also recommended that research be carried out in space in the areas of health effects and particle characterization.

Source record↗

Synthesis and luminescence properties of Yb{sup 3+} and Er{sup 3+} doped KLa(WO{sub 4}){sub 2} nanoparticles

The luminescent nanocrystalline Yb{sup 3+} and Er{sup 3+} codoped KLa(WO{sub 4}){sub 2} has been prepared by Pechini method. X-ray diffraction and transmission electron microscope were used to study the structure of the obtained samples. The average grain size of these samples depended on the annealing temperature, increasing with the increase of the temperature. The cell parameters and the crystallite size of KYb{sub x}Er{sub 0.02}La{sub 0.98-x}(WO{sub 4}){sub 2} nanocrystalline decreased with the increase of x value. Luminescence studies showed that the intensity of upconversion emission of the Yb{sup 3+} and Er{sup 3+} codoped samples was much stronger than that of the Er{sup 3+} single doped samples (pumped by 980 nm LD). The upconversion emission mechanisms suggested that all the three bands of upconversion emissions were two-photon process. - Graphical abstract: Er{sup 3+} and Yb{sup 3+} codoped KLa(WO{sub 4}){sub 2} nanoparticles have been prepared by Pechini method. Luminescence studies showed that the intensity of upconversion emission of the Yb{sup 3+} and Er{sup 3+} codoped samples was much stronger than that of the Er{sup 3+} single doped samples (pumped by 980 nm LD), and the upconversion emission mechanisms suggested that all the three bands of upconversion emissions were two-photon process.

36 MATERIALS SCIENCE↗

Novel Proppant Logging Technique for Infill Drilling of Unconventional Shale Wells

Summary During the development of an unconventional play, wells are drilled and completed in batches, and depending on the development plans, current and expected energy market trends, as well as other developmental considerations, new wells are drilled and hydraulically fractured later near existing producing laterals. This creates challenges in terms of optimizing resource recovery and reducing interwell communication. A novel approach is proposed that utilizes systematic composite sampling and analysis of drilling mud returns to look for and quantitatively identify sand particles. The workflow involves cleaning, drying, and segregation of samples into sizes of interest to us (size distribution of pumped proppant in offset parent wells). These samples are imaged at a very high resolution and analyzed for grains using characteristic optical imaging properties to classify proppant sand particles using computer vision algorithms. Further analysis, such as elemental compositional analysis, is used to validate the results from the imaging workflow. We present a case study from the Permian Basin, where a new child well was used as a test case to prove this technology at the Hydraulic Fracturing Test Site (HFTS-2) in Delaware Basin. We introduce new proppant parameters that help identify sustained proppant zones vs. localized propped fractures. We have used additional diagnostics and data collected at the test site to validate observations from the proppant log and have successfully interpreted significantly propped vs. unpropped zones. A key finding from this test has been the significant proppant transport distances observed away from parent wells. Observable proppant was found at a lateral distance of approximately 425 m for one set of parent wells and more than 915 m for another set of parent wells. While a major limitation of this technique is the sampling rate, given adequate sampling, the proposed technology represents a systematic and one-of-a-kind interpretation of spatial proppant distribution while drilling infill wells. It provides us with unique opportunities to better understand the current state of the reservoir being targeted, including zones that are likely highly drained relative to others, and how the planned hydraulic fracturing of child wells can be improved.

Energy & Fuels↗

Max-Compound Cox Processes. I

Extreme values are considered in samples with random size that have a mixed Poisson distribution that is generated by a doubly stochastic Poisson process. Some inequalities are proved relating the distributions and moments of extrema with those of the leading process (the mixing distribution). Limit theorems are proved for the distributions of max-compound Cox processes, and limit distributions are described. An important particular case of the negative binomial distribution of a sample size corresponding to the case where the Cox process is led by a gamma Lévy process is considered, explaining a possible genesis of tempered asymptotic models.

97 MATHEMATICS AND COMPUTING↗

Particle size of several plutonium-238 oxide fuel samples from oxalate precipitation processes

Particle size of 238 PuO 2 powders is an important factor in determining the structural integrity of fuel pellets hot-pressed from the oxide powder. Understanding the evolution of particle size during aqueous processing is a first step in assuring control of particle size throughout the pellet formation process. Measured particle sizes are reported here, and discussed in terms of measured particle size changes occurring during calcining, observed aggregation of particulate, and particle morphology. Morphology and aggregation are related to surface energy, which governs granule formation and hot pressing behavior. Results are discussed in terms of reported dependence of oxide morphology on process temperatures and reagent concentrations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗