Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Optical Properties of Tellurium-Based Chalcogenide Alloys in the Far Infrared Region (λ > 30 μm)

Ternary telluride alloys of Ge–Se(Sb)–Te and Si–Ge(Ga)–Te systems are synthesized in glassy and crystalline states for use in the terahertz frequency range. The transmission spectra of the obtained alloys are measured and studied in a wide wavelength range from 0.75 to 300 μm. The possible mechanisms of their formation are discussed. A comparative analysis of the results shows that the Ge{sub 14}Sb{sub 28}Te{sub 56} alloy of the GST system is most promising. Its phonon spectrum is in the range of 40–280 cm{sup –1}, limiting the long-wavelength transmission window of this alloy by 35 μm. Optimization of the Ge{sub 14}Sb{sub 28}Te{sub 56} composition, the removal of impurities, and heat treatment will promote a further decrease in the absorbance in the far-infrared spectrum of this alloy.

36 MATERIALS SCIENCE↗

Change in the Magnetocapacity in the Paramagnetic Region in a Cation-Substituted Manganese Selenide

The capacity and the dielectric loss tangent of a Gd{sub x}Mn{sub 1–x}Se (x ≤ 0.2) solid solution have been measured in the frequency range 1–300 kHz without a magnetic field and in a magnetic field of 8 kOe in the temperature range 100–450 K, and the magnetic moment of the solid solution has been measured in a field of 8.6 kOe. The magnetocapacity effect and the change in the magnetocapacity sign have been observed in room temperature in the paramagnetic region. A correlation of the changes in the dielectric permittivity and the magnetic susceptibility with temperature has been revealed. The magnetocapacity is described using the model with orbital electron ordering and the Maxwell–Wagner model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Properties of Intercalated Ag{sub x}MoSe{sub 2} Compounds in Constant and Alternating Fields

On intercalated Ag{sub x}MoSe{sub 2} samples, in addition to temperature measurements of the direct current electrical resistivity, measurements of the alternating current resistivity using the impedance spectroscopy technique are carried out in a wide frequency range and at different temperatures. The activation behavior of the d.c. conductivity, which increases with increasing silver content in the samples, is shown. The a.c. conductivity undergoes frequency dispersion, described by a “universal dynamic response” (UDR). It is shown that the relaxation processes during charge transfer in a variable field are accelerated with increasing silver content in the samples and with increasing temperature. The data obtained are analyzed using the models of the band and hopping conduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic Properties of the Mn{sub 1–x}Gd{sub x}Se Solid Solutions

The results of kinetic study of the Mn{sub 1–x}Gd{sub x}Se chalcogenide solid solutions with different substitute concentrations (0 ≤ x ≤ 0.15) in the temperature range of 80–400 K are reported. The difference between the Hall constant and thermopower signs has been found. The electron-type conductivity determined from the Hall constant and hysteresis of the I–V characteristics have been explained by the existence of nanoareas with local electric polarizations. The sharp extrema observed in the temperature dependence of thermopower are explained by splitting of a narrow 4f subband by the crystal field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Dependence of the Lattice Parameters of Cu{sub 2 –} {sub x}Se (0.03 ≤ x ≤ 0.23) Powders Fabricated by Mechanochemical Synthesis

Abstract—The Cu{sub 2 –} {sub x}Se (0.03 ≤ x ≤ 0.23) powders fabricated by mechanochemical synthesis have been studied by X-ray diffraction. The in situ study has been carried out for the temperature dependences of the lattice parameters, the structures, and the phase compositions of the powders in the temperature range 25–350°C. The powder compositions are shown to differ from the charge compositions and are shifted to lower copper concentrations. The estimation of peak half-widths of the cubic β phase indicates an increase in the structure imperfection after the phase transition from the α phase to the β phase of Cu{sub 2 –} {sub x}Se at ~140°C. It is shown that the superpositions of the subtraction solutions (copper vacancies) and interstitials solutions (copper atoms in interstitial sites), whose proportion is changed as a function of temperature and the deviation from stoichiometry, are in the thermodynamic equilibrium in the copper selenide solid solution at room temperature. The change in the slope of the dependence of the lattice parameter of the powder Cu{sub 2 –} {sub x}Se samples on the composition (0.03 ≤ x ≤ 0.23) in the temperature range 25–350°C enables the suggestion that interstitial copper atom concentration increases with temperature and deviation from stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific Features of the Nonlinear Microwave Response of the (Na{sub 0.3}K{sub 0.7}){sub x}Fe{sub 2 –} {sub y}Se{sub 2} Sodium–Potassium Ferroselenide-Based Multiband Superconductors

Abstract—Temperature dependences of the third-harmonic power for the (Na{sub 0.3}K{sub 0.7}){sub x}Fe{sub 2 –} {sub y}Se{sub 2} sodium–potassium ferroselenide single crystals have been investigated by nonlinear near-field microwave microscopy. The temperature dependence of magnetic susceptibility at a frequency of 100 kHz for this compound has been measured. The experimental results suggest a double-gap structure of the (Na{sub 0.3}K{sub 0.7}){sub x}Fe{sub 2 –} {sub y}Se{sub 2} superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser-Induced Phase Transitions in Vitreous Se Films Obtained by Vacuum-Thermal Evaporation

The results of the study of vitreous Se films obtained by a method of vacuum-thermal evaporation after their laser modification are presented. It is shown for the first time that a low-power laser irradiation of the film at a wavelength of 632.8 nm and room temperature results in a nucleation and growth of nanocrystallites of monoclinic and rhombohedral Se in an amorphous matrix of the film. The formation of the stable hexagonal Se phase is not observed. The appearance of nanocrystallites with an average size of ~20–30 nm is accompanied by a growth of a reflection coefficient of the film. The established new optical and structural properties of the formed films are stable in time at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Te-As-Se glass microstructured optical fiber for the middle infrared

We present the first fabrication, to the best of our knowledge, of chalcogenide microstructured optical fibers in Te-As-Se glass, their optical characterization, and numerical simulations in the middle infrared. In a first fiber, numerical simulations exhibit a single-mode behavior at 3.39 and 9.3 {mu}m, in good agreement with experimental near-field captures at 9.3 {mu}m. The second fiber is not monomode between 3.39 and 9.3 {mu}m, but the fundamental losses are 9 dB/m at 3.39 {mu}m and 6 dB/m at 9.3 {mu}m. The experimental mode field diameters are compared to the theoretical ones with a good accordance.

36 MATERIALS SCIENCE↗

ADVANCED GASIFICATION MERCURY/TRACE METAL CONTROL WITH MONOLITH TRAPS

Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m3 (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m3 (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most effective arsine and hydrogen selenide sorbents. The noncarbon sorbent was able to reduce the concentration to 0 ppb from a starting concentration of 120 ppb. This compares to the target value of 5 ppb (~17μg/m3). The EERC-prepared metal-based pellet and coprecipitate sorbents exhibited arsine reductions of 90% or greater, being below 10 ppb. Corning SR Liquid monoliths exhibited brief periods (<1 hour) of attaining 90% arsine reduction but were able to achieve greater than 80% reduction for several hours. With respect to hydrogen selenide, all Group IB and IIB metal-based sorbents tested exhibited 100% reduction from an inlet concentration of approximately 400 ppb. Corning SR Liquid monoliths exhibited an 82% reduction when two monoliths were tested simultaneously in series.

36 MATERIALS SCIENCE↗

Modeling and Depletion Simulations for a High Flux Isotope Reactor Cycle with a Representative Experiment Loading

The purpose of this report is to document a high-fidelity VESTA/MCNP High Flux Isotope Reactor (HFIR) core model that features a new, representative experiment loading. This model, which represents the current, high-enriched uranium fuel core, will serve as a reference for low-enriched uranium conversion studies, safety-basis calculations, and other research activities. A new experiment loading model was developed to better represent current, typical experiment loadings, in comparison to the experiment loading included in the model for Cycle 400 (operated in 2004). The new experiment loading model for the flux trap target region includes full length 252 Cf production targets, 75 Se production capsules, 63 Ni production capsules, a 188 W production capsule, and various materials irradiation targets. Fully loaded 238 Pu production targets are modeled in eleven vertical experiment facilities located in the beryllium reflector. Other changes compared to the Cycle 400 model are the high-fidelity modeling of the fuel element side plates and the material composition of the control elements. Results obtained from the depletion simulations with the new model are presented, with a focus on time-dependent isotopic composition of irradiated fuel and single cycle isotope production metrics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High lifetime and mobility CdTe alloys by co-sublimation

The focus of this project was to understand controlled doping of CdTe and CdSe x Te 1-x films using group V element dopants such as nitrogen and arsenic. Using methods such as metal organic precursor injection as well as deposition of absorber with source charge incorporated with desired group V dopant. Using characterization methods such as Secondary Ion Mass Spectroscopy and capacitance vs voltage measurement dopant incorporation and activation was verified. Since our deposition system had CuCl deposition source, this source was permanently removed from the system and vacuum chamber was thoroughly cleaned out. CdSe x Te 1-x grading into CdTe has led to higher device efficiency owing to an improvement in short-circuit current (J SC ) due to its lower band-gap. More device fabrication and characterization was performed in an effort to optimize the lower band-gap CdSe x Te 1-x . This optimization was performed using different co-sublimation method where CdTe and Se were co-sublimated in varying proportion to sweep the band-gap of CdSe x Te 1-x that deposited on the substrate.

14 SOLAR ENERGY↗

Topological Insulators at Room Temperature

Topological insulators are new states of quantum matter with surface states protected by the time-reversal symmetry. In this work, we perform first-principle electronic structure calculations for Sb{sub 2}Te{sub 3}, Sb{sub 2}Se{sub 3}, Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} crystals. Our calculations predict that Sb{sub 2}Te{sub 3}, Bi{sub 2}T e{sub 3} and Bi{sub 2}Se{sub 3} are topological insulators, while Sb{sub 2}Se{sub 3} is not. In particular, Bi{sub 2}Se{sub 3} has a topologically non-trivial energy gap of 0.3eV , suitable for room temperature applications. We present a simple and unified continuum model which captures the salient topological features of this class of materials. These topological insulators have robust surface states consisting of a single Dirac cone at the {Lambda} point.

36 MATERIALS SCIENCE↗

REACTION RATES OF {sup 64}Ge(p,γ){sup 65}As AND {sup 65}As(p,γ){sup 66}Se AND THE EXTENT OF NUCLEOSYNTHESIS IN TYPE I X-RAY BURSTS

The extent of nucleosynthesis in models of type I X-ray bursts (XRBs) and the associated impact on the energy released in these explosive events are sensitive to nuclear masses and reaction rates around the {sup 64}Ge waiting point. Using the well known mass of {sup 64}Ge, the recently measured {sup 65}As mass, and large-scale shell model calculations, we have determined new thermonuclear rates of the {sup 64}Ge(p,γ){sup 65}As and {sup 65}As(p,γ){sup 66}Se reactions with reliable uncertainties. The new reaction rates differ significantly from previously published rates. Using the new data, we analyze the impact of the new rates and the remaining nuclear physics uncertainties on the {sup 64}Ge waiting point in a number of representative one-zone XRB models. We find that in contrast to previous work, when all relevant uncertainties are considered, a strong {sup 64}Ge rp-process waiting point cannot be ruled out. The nuclear physics uncertainties strongly affect XRB model predictions of the synthesis of {sup 64}Zn, the synthesis of nuclei beyond A = 64, the energy generation, and the burst light curve. We also identify key nuclear uncertainties that need to be addressed to determine the role of the {sup 64}Ge waiting point in XRBs. These include the remaining uncertainty in the {sup 65}As mass, the uncertainty of the {sup 66}Se mass, and the remaining uncertainty in the {sup 65}As(p,γ){sup 66}Se reaction rate, which mainly originates from uncertain resonance energies.

79 ASTRONOMY AND ASTROPHYSICS↗

Identification of Near-infrared [Se iii] and [Kr vi] Emission Lines in Planetary Nebulae

We identify [Se iii] 1.0994 μ m in the planetary nebula (PN) NGC 5315 and [Kr vi] 1.2330 μ m in three PNe from spectra obtained with the Folded-Port InfraRed Echellette (FIRE) spectrometer on the 6.5 m Baade Telescope. Se and Kr are the two most widely detected neutron-capture elements in astrophysical nebulae, and can be enriched by s -process nucleosynthesis in PN progenitor stars. The detection of [Se iii] 1.0994 μ m is particularly valuable when paired with observations of [Se iv] 2.2864 μ m, as it can be used to improve the accuracy of nebular Se abundance determinations, and allows Se ionization correction factor (ICF) schemes to be empirically tested for the first time. We present new effective collision strength calculations for Se{sup 2+} and Kr{sup 5+}, which we use to compute ionic abundances. In NGC 5315, we find that the Se abundance computed from Se{sup 3+}/H{sup +} is lower than that determined with ICFs that incorporate Se{sup 2+}/H{sup +}. We compute new Kr ICFs that take Kr{sup 5+}/H{sup +} into account, by fitting correlations found in grids of Cloudy models between Kr ionic fractions and those of more abundant elements, and use these to derive Kr abundances in four PNe. Observations of [Se iii] and [Kr vi] in a larger sample of PNe, with a range of excitation levels, are needed to rigorously test the ICF prescriptions for Se and our new Kr ICFs.

79 ASTRONOMY AND ASTROPHYSICS↗

Leaching kinetics of As, Mo, and Se from acidic coal fly ash samples

Annually, coal-fired electric power plants produce large volumes potentially hazardous coal combustion products (CCPs) including fly ash. Since majority of the coal fly ash and other CCPs deposited in dry land fills or wet lagoons, they pose risk of contamination to local environment and hydrogeology. In this study, we present results of leaching kinetics for As, Mo, and Se from three acidic fly ash samples. This study shows that the leachate concentrations of As, Mo, and Se increase over time. Three kinetics equations, pseudo-second order, Elovich, and power-function, are able to adequately describe the experimental leaching kinetics data. Experimental leaching data and modeling results indicate that the rate limiting leaching of As, Mo, and Se is largely controlled by the dissolution of the fly ash particles. Furthermore, it is important to adopt effective containment/treatment schemes to avoid potential and persistent dispersion of trace elements from ash disposal facilities to surrounding environment for a long time.

54 ENVIRONMENTAL SCIENCES↗