Search NASA⌕ Search

SEARCH · Search NASA

Results for “sensitivity gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

PROJECTED IMPACT OF SULFATE ATTACK ON THE LONG-TERM PERFORMANCE OF A CONCRETE REPOSITORY

Saltstone is a cementitious waste form made by mixing salt solution originating from liquid waste storage tanks at the DOE Savannah River Site with a dry mix containing blast furnace slag, fly ash, and cement or lime. The wet mix is poured into a concrete repository for on-site disposal. Solidified Saltstone is a dense, alkaline, reducing, micro-porous, monolithic, cementitious matrix, containing a solution of salts within its pore structure. Sodium sulfate concentrations in the pore fluid are around 0.15 mol/L, and external sulfate attack on concrete barriers is expected to occur over time. To predict the long-term performance of concrete repositories, the STADIUM{reg_sign} code was used to simulate the reactive transport processes leading to formation of ettringite, an expansive mineral phase often associated with spalling or cracking. STADIUM{reg_sign} is a multi-ionic transport model based on a split operator approach that separates ionic movement and chemical reactions. Ionic transport is described by the extended Nernst-Planck equation for unsaturated media, and accounts for electrical coupling between ionic species, chemical activity, transport due to water content gradient, and temperature effects. STADIUM{reg_sign} does not predict whether physical damage will occur, or the impact on transport properties should fracturing occur. Thus the presence of ettringite was assumed to coincide with physical damage for the purpose of estimating effective transport properties. Effective properties for concrete barriers were estimated assuming complete hydraulic failure behind the ettringite front and unaltered properties ahead of the front. The ettringite front advances at a rate dependent on the diffusion coefficient assumed for the failed zone. A sensitivity study indicates a service life ranging from thousands to tens of thousands of years, depending on the barrier thickness and sulfate exposure conditions among other factors.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ocean Biological Pump Sensitivities and Implications for Climate Change Impacts

The ocean is one of the principal reservoirs of CO2, a greenhouse gas, and therefore plays a crucial role in regulating Earth's climate. Currently, the ocean sequesters about a third of anthropogenic CO2 emissions, mitigating the human impact on climate. At the same time, the deeper ocean represents the largest carbon pool in the Earth System and processes that describe the transfer of carbon from the surface of the ocean to depth are intimately linked to the effectiveness of carbon sequestration.The ocean biological pump (OBP), which involves several biogeochemical processes, is a major pathway for transfer of carbon from the surface mixed layer into the ocean interior. About 75 of the carbon vertical gradient is due to the carbon pump with only 25 attributed to the solubility pump. However, the relative importance and role of the two pumps is poorly constrained. OBP is further divided to the organic carbon pump (soft tissue pump) and the carbonate pump, with the former exporting about 10 times more carbon than the latter through processes like remineralization.Major uncertainties about OBP, and hence in the carbon uptake and sequestration, stem from uncertainties in processes involved in OBP such as particulate organicinorganic carbon sinkingsettling, remineralization, microbial degradation of DOC and uptakegrowth rate changes of the ocean biology. The deep ocean is a major sink of atmospheric CO2 in scales of hundreds to thousands of years, but how the export efficiency (i.e. the fraction of total carbon fixation at the surface that is transported at depth) is affected by climate change remains largely undetermined. These processes affect the ocean chemistry (alkalinity, pH, DIC, particulate and dissolved organic carbon) as well as the ecology (biodiversity, functional groups and their interactions) in the ocean. It is important to have a rigorous, quantitative understanding of the uncertainties involved in the observational measurements, the models and the projections of future changes.

particulates↗

In Situ UV–vis Quantification of Chlorobasicity in Binary Molten Chlorides

Optical basicity measurements provide a basis for determining the relative chlorobasicity of a given molten salt composition. This study uses Bi3+ as a spectroscopic probe to investigate optical basicity across three binary molten chloride systems (LiCl-KCl, MgCl2–KCl, and ZnCl2–KCl) through in situ UV–vis spectroscopy measurements of the 1S0→3P1 transition. LiCl-KCl systems exhibit the highest optical basicity with minimal compositional dependence, while both divalent systems show stronger, yet nonlinear, dependence that is reminiscent of acid–base titration curves. The influence of cation electronegativity and polarizing power (Li+ < Mg2+ < Zn2+) directly reflects the basicity curves, with ZnCl2–KCl displaying the steepest gradients and lowest basicity values. Nonlinear dependencies in divalent systems indicate formation of chloride-bridged network structures with coordination states dictated by the amount of KCl in a salt composition, which was further investigated and validated by molecular dynamics simulations of polymeric structures formed in ZnCl2 and MgCl2-based salts using machine learning force fields. The temperature dependence of chlorobasicity in terms of optical basicity was investigated, and a loose, positive correlation between the two was revealed. These findings establish Bi3+ as a sensitive probe for understanding electronic environments in molten chloride systems and provide insights for predicting the chemical behavior of molten salts for use in high-temperature environments.

Buttice, Kailee [Department of Nuclear Engineering↗

Low-Temperature Densification of Lanthanum Strontium Manganite (La1-xSrxMnO3+δ), x=0.0-0.20

Intermediate-stage sintering of lanthanum strontium manganite (LSM, where Sr=0.00, 0.05, 0.10, 0.15, and 0.20) was shown in dilatometry studies to be accelerated when subjected to alternating flows of air and nitrogen. The extent of rate enhancement decreased with increased Sr content, and decreases with increased temperature, which coincides with diminished oxygen non-stoichiometry. Shrinkage rates were shown further to be sensitive to the difference in oxygen content in the alternating gas flows. Baseline air sintering rates were measured using stepwise isothermal dilatometry, from which kinetic parameters were calculated using the Makipirtti-Meng model. Activation energies for sintering in air were determined to be 255±26, 258±28, 308±32, 373±37, and 417±41 kJ/mol for Sr=0.0, 0.05, 0.10, 0.15, and 0.20, respectively. A diffusion-based model is proposed that is consistent with trends in accelerated shrinkage versus temperature. Transient cation vacancy gradients, which lead to higher cation mobility, were calculated from established oxygen diffusivities and oxygen non-stoichiometry as a function of temperature and time. A potential application of this approach is processing of LSM-based cathode-side contact pastes in solid oxide fuel cells.

30 DIRECT ENERGY CONVERSION↗

TOWARD AN EMPIRICAL THEORY OF PULSAR EMISSION. IX. ON THE PECULIAR PROPERTIES AND GEOMETRIC REGULARITY OF LYNE AND MANCHESTER'S 'PARTIAL CONE' PULSARS

Lyne and Manchester identified a group of some 50 pulsars they called 'partial cones' which they found difficult to classify and interpret. They were notable for their asymmetric average profiles and asymmetric polarization position angle (PPA) traverses, wherein the steepest gradient (SG) point fell toward one edge of the total intensity profile. Over the last two decades, this population of pulsars has raised cautions regarding the core/cone model of the radio pulsar emission beam which implies a high degree of order, symmetry, and geometric regularity. In this paper, we reinvestigate this population 'partial cone' pulsars on the basis of new single pulse polarimetric observations of 39 of them, observed with the Giant Meterwave Radio Telescope in India and the Arecibo Observatory in Puerto Rico. These highly sensitive observations help us to establish that most of these 'partial cones' exhibit a core/cone structure just as did the 'normal' pulsars studied in the earlier papers of this series. In short, we find that many of these 'partial cones' are partial in the sense that the emission above different areas of their polar caps can be (highly) asymmetric. However, when studied closely we find that their emission geometries are overall identical to a core/double cone structure encountered earlier-that is, with specific conal dimensions scaling as the polar cap size. Further, the 'partial cone' population includes a number of stars with conal single profiles that are asymmetric at meter wavelengths for unknown reasons (e.g., like those of B0809+74 or B0943+10). We find that aberration-retardation appears to play a role in distorting the core/cone emission-beam structure in rapidly rotating pulsars. We also find several additional examples of highly polarized pre- and postcursor features that do not appear to be generated at low altitude but rather at high altitude, far from the usual polar flux tube emission sites of the core and conal radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical diagnostics of laser-produced plasmas

Laser-produced plasmas (LPPs) engulf exotic and complex conditions ranging in temperature, density, pressure, magnetic and electric fields, charge states, charged particle kinetics, and gas-phase reactions, based on the irradiation conditions, target geometries, and the background cover gas. The application potential of the LPP is so diverse that it generates considerable interest for both basic and applied research areas. The fundamental research on LPPs can be traced back to the early 1960s, immediately after the invention of the laser. In the 1970s, the laser was identified as a tool to pursue inertial confinement fusion, and since then, several other technologies emerged out of LPPs. These applications prompted the development and adaptation of innovative diagnostic tools for understanding the fundamental nature and spatiotemporal properties of these complex systems. Although most of the traditional characterization techniques developed for other plasma sources can be used to characterize the LPPs, care must be taken to interpret the results because of their small size, transient nature, and inhomogeneities. The existence of the large spatiotemporal density and temperature gradients often necessitates non-uniform weighted averaging over distance and time. Among the various plasma characterization tools, optical-based diagnostic tools play a key role in the accurate measurements of LPP parameters. The optical toolbox contains optical spectroscopy (emission, absorption, and fluorescence), passive and active imaging and optical probing methods (shadowgraphy, Schlieren, interferometry, Thomson scattering, deflectometry, and velocimetry). Each technique is useful for measuring a specific property, and its use is limited to a certain time span during the LPP evolution because of the sensitivity issues related to the selected measuring tool. Therefore, multiple diagnostic tools are essential for a comprehensive insight into the entire plasma behavior. In recent times, the improvements in performance in the lasers and detector systems expanded the capability of the aforementioned passive and active diagnostics tools. Furthermore, this review provides an overview of optical diagnostic tools frequently employed for the characterization of the LPPs and emphasizes techniques, associated assumptions, and challenges. Considering most of the industrial and other applications of the LPP belong to low to moderate laser intensities (10 8 – 10 15 Wcm –2 ), this review focuses on diagnostic tools pertaining to this regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data from: "Colonisation of the alpine tundra by trees: alpine neighbours assist late-seral but not early-seral conifer seedlings"

This archive contains data used to support conclusions made in “Colonisation of the alpine tundra by trees: alpine neighbours assist late-seral but not early-seral conifer seedlings”, by Jabis et al., 2020. Data were collected in the alpine field location of the Alpine Treeline Warming Experiment (ATWE), on Niwot Ridge, in the Front Range of the Colorado Rocky Mountains, USA.This package includes survivorship and physiology data for limber pine (Pinus flexilis), Engelmann spruce (Picea engelmannii), and Rocky Mountain snowlover (Chionophila jamesii). Site climate data such as soil moisture and temperature are also included. This data package contains ten comma-separated-values (.csv) files, and two rich-text-format (.rtf) files all compressed within one folder named “Neighbor_data_repository.zip”. Both file types can be opened by text-edit softwares such as TextEdit (Mac) and Notepad (Windows). The files are also compatible with analyses softwares such as R. .csv files can also be opened by Microsoft Excel. Two geospatial datasets are also included in this archive: one keyhole markup language (.kml) file with four points marking the corners of the study site, and a compressed file containing two ESRI shapefiles (.shp). The .kml files can be opened with Google Earth or Google Maps, and the shapefiles can be opened using any geographic information system applications, including the entire ArcGIS suite, and QGIS. -------------------------------------------------------------------------------------------------------------------------------------------------------The elevation mountain treeline is expected to shift upward with climate warming, and seed germination and seedling survival are critical local controls on treeline expansion. Neighboring alpine plants, either through competition for resources or through altering the microclimate, can also affect seedling emergence and survival. We asked whether establishing tree seedlings and an alpine herb are similarly sensitive to alpine plant neighbours under ambient and altered climate. We imposed active heating, watering, and neighbor removal experiments for emerging conifer seedlings and an alpine herb.We compared target plant survival, photosynthetic efficiency, and water use efficiency under ambient and experimental conditions. Picea engelmannii seedlings showed lower survival compared with Pinus flexilis three weeks following neighbour removal, and after 1 year only survived in watered plots. Pinus seedlings responded to neighbour removal by lowering the quantum yield of photosynthesis (ϕPSII). Contrary to expectations from the stress gradient hypothesis, survival was reduced without neighbours near the low-elevation range limit of Chionophila jamesii.

54 ENVIRONMENTAL SCIENCES↗

The AGORA High-resolution Galaxy Simulations Comparison Project. VIII. Disk Formation and Evolution of Simulated Milky Way Mass Galaxy Progenitors at 1 < z < 5

We investigate how differences in the stellar feedback produce disks with different morphologies in Milky Way–like progenitors over 1 ≤ z ≤ 5, using eight state-of-the-art cosmological hydrodynamics simulation codes in the AGORA project. In three of the participating codes, a distinct, rotation-dominated inner core emerges with a formation timescale of ≲300 Myr, largely driven by a major merger event, while two other codes exhibit similar signs of wet compaction—gaseous shrinkage into a compact starburst phase—at earlier epochs. The remaining three codes show only weak evidence of wet compaction. Consequently, we divide the simulated galaxies into two groups: those with strong compaction signatures and those with weaker ones. Galaxies in these two groups differ in size, stellar age gradients, and disk-to-total mass ratios. Specifically, codes with strong wet compaction build their outer disks in an inside-out fashion, leading to negative age gradients, whereas codes with weaker compaction feature flat or positive age gradients caused primarily by outward stellar migration. Although the stellar half-mass radii of these two groups diverge at z ∼ 3, the inclusion of dust extinction brings their sizes and shapes in mock observations closer to each other and to observed galaxies. We attribute the observed morphological differences primarily to variations in the stellar feedback implementations—such as delayed cooling timescales, and feedback strengths—that regulate both the onset and duration of compaction. Overall, our results suggest that disk assembly at high redshifts is highly sensitive to the details of the stellar feedback prescriptions in simulations.

Jung, Minyong [Seoul National Univ. (Korea, Republ↗

Modelling TOVS radiances of synoptic systems

Two operational analysis models, produced by ECMWF and NMC, are compared against observed satellite radiances by converting the analyzed variables into synthetic radiances using a radiative transfer model (RTM). Observed TOVS satellite radiances are used as a ground truth, since they are the only source of continuous, synoptic-scale resolution observations available over the data-sparse tropical Pacific Ocean. It is assumed that if the analysis models correctly simulate atmospheric conditions, the observed and modelled radiance fields will have similar patterns and magnitudes. In each of seven TOVS channels examined, the mean temperature difference between the models was small, but the differences between the models and the observations were large. The mean temperature difference within each channel was larger than the standard deviation in most cases. The moisture channels of the RTM were sensitive to changes in moisture content, but none of the channels were significantly affected by changes in temperature. Single-day modelled radiance analyses contain synoptic information similar to the satellite observations. ECMWF is often too noisy, producing features not verified by the satellite; NMC is often too smooth. NMC more closely resembles the TOVS contours. Modelled water vapor channel analyses resemble observed monthly and composited observations well, but do not accurately reproduce the highly-variable single-day fields. ECMWF generally has more accurate gradients. Neither model simulates the tropics well. The water vapor channels, especially channel eleven (weighted at 700 mb), most closely resembled the tropical plume composite described by McGuirk and Ulsh. The only plume evidence found in the thermal or microwave channels, in either the observations or the models, was a composite trough situated in the correct location, extending from the mid-latitudes into the subtropics. This feature was not readily discernable until the definition and mature stages. Additional information besides the modelled temperatures would be required to produce an accurate forecast for the tropics. Model patterns more closely resembled the observations in the quiescent atmosphere, though the magnitudes were not any closer. ECMWF simulates the TOVS quiescent state better than NMC. The moisture channels continue to present the most realistic patterns. The models contained more detail in the tropics than was verified by the satellite observations, apparently trying to force an active ITCZ. Lag correlations showed TOVS to be more persistent than the models. TOVS also showed a smoother lag trend, but all products appeared to have adequate ability to react to changes in the atmosphere over time.

Coe, Thomas Eddy↗

Impacts of Varying Concentrations of Cloud Condensation Nuclei On Deep Convective Cloud Updrafts – A Multimodel Assessment

This study presents results from a model intercomparison project, focusing on the range of responses in deep convective cloud updrafts to varying cloud condensation nuclei (CCN) concentrations amongst seven, state-of-the-art, cloud-resolving models. Simulations of scattered convective clouds near Houston, Texas are conducted, after being initialized with both relatively low and high CCN concentrations. Deep convective updrafts are identified, and trends in the updraft intensity and frequency are assessed. The factors contributing to the vertical velocity tendencies are examined to identify the physical processes associated with the CCN-induced, updraft changes. The models show several consistent trends. In general, the changes between the High- CCN and Low-CCN simulations in updraft magnitudes throughout the depth of the troposphere are within 15% for all of the models. All models produce stronger (~+5-15%) mean updrafts from ~4–7 km above ground level (AGL) in the High-CCN simulations, followed by a waning response up to ~8 km AGL in most of the models. Thermal buoyancy was more sensitive than condensate loading to varying CCN concentrations in most of the models and more impactful in the mean updraft responses. However, there are also differences between the models. The change in the amount of deep convective updrafts varies significantly. Furthermore, approximately half the models demonstrate neutral-to-weaker (~-5-0%) updrafts above ~8 km AGL, while the other models show stronger (~+10%) updrafts in the High-CCN simulations. The combination of the CCN-induced impacts on the buoyancy and vertical perturbation pressure gradient terms better explains these middle- and upper-tropospheric updraft trends than the buoyancy terms alone.

deep convective cloud updrafts↗

Impacts of Varying Concentrations of Cloud Condensation Nuclei on Deep Convective Cloud Updrafts—A Multimodel Assessment

Abstract This study presents results from a model intercomparison project, focusing on the range of responses in deep convective cloud updrafts to varying cloud condensation nuclei (CCN) concentrations among seven state-of-the-art cloud-resolving models. Simulations of scattered convective clouds near Houston, Texas, are conducted, after being initialized with both relatively low and high CCN concentrations. Deep convective updrafts are identified, and trends in the updraft intensity and frequency are assessed. The factors contributing to the vertical velocity tendencies are examined to identify the physical processes associated with the CCN-induced updraft changes. The models show several consistent trends. In general, the changes between the High-CCN and Low-CCN simulations in updraft magnitudes throughout the depth of the troposphere are within 15% for all of the models. All models produce stronger (~+5%–15%) mean updrafts from ~4–7 km above ground level (AGL) in the High-CCN simulations, followed by a waning response up to ~8 km AGL in most of the models. Thermal buoyancy was more sensitive than condensate loading to varying CCN concentrations in most of the models and more impactful in the mean updraft responses. However, there are also differences between the models. The change in the amount of deep convective updrafts varies significantly. Furthermore, approximately half the models demonstrate neutral-to-weaker (~−5% to 0%) updrafts above ~8 km AGL, while the other models show stronger (~+10%) updrafts in the High-CCN simulations. The combination of the CCN-induced impacts on the buoyancy and vertical perturbation pressure gradient terms better explains these middle- and upper-tropospheric updraft trends than the buoyancy terms alone.

54 ENVIRONMENTAL SCIENCES↗

Asymmetric responses of primary productivity to altered precipitation simulated by ecosystem models across three long-term grassland sites

Field measurements of aboveground net primary productivity (ANPP) in temperate grasslands suggest that both positive and negative asymmetric responses to changes in precipitation (P) may occur. Under normal range of precipitation variability, wet years typically result in ANPP gains being larger than ANPP declines in dry years (positive asymmetry), whereas increases in ANPP are lower in magnitude in extreme wet years compared to reductions during extreme drought (negative asymmetry). Whether the current generation of ecosystem models with a coupled carbon–water system in grasslands are capable of simulating these asymmetric ANPP responses is an unresolved question. For this study, we evaluated the simulated responses of temperate grassland primary productivity to scenarios of altered precipitation with 14 ecosystem models at three sites: Shortgrass steppe (SGS), Konza Prairie (KNZ) and Stubai Valley meadow (STU), spanning a rainfall gradient from dry to moist. We found that (1) the spatial slopes derived from modeled primary productivity and precipitation across sites were steeper than the temporal slopes obtained from inter-annual variations, which was consistent with empirical data; (2) the asymmetry of the responses of modeled primary productivity under normal inter-annual precipitation variability differed among models, and the mean of the model ensemble suggested a negative asymmetry across the three sites, which was contrary to empirical evidence based on filed observations; (3) the mean sensitivity of modeled productivity to rainfall suggested greater negative response with reduced precipitation than positive response to an increased precipitation under extreme conditions at the three sites; and (4) gross primary productivity (GPP), net primary productivity (NPP), aboveground NPP (ANPP) and belowground NPP (BNPP) all showed concave-down nonlinear responses to altered precipitation in all the models, but with different curvatures and mean values. Our results indicated that most models overestimate the negative drought effects and/or underestimate the positive effects of increased precipitation on primary productivity under normal climate conditions, highlighting the need for improving eco-hydrological processes in those models in the future.

54 ENVIRONMENTAL SCIENCES↗

Aeroelastic stability and response of horizontal axis wind turbine blades

The coupled flap-lag-torsion equations of motion of an isolated horizontal axis wind turbine blade are formulated. Quasi-steady blade-element strip theory was applied to derive the aerodynamic operator which includes boundary layer type gradient winds. The final equations which have periodic coefficients were solved in order to obtain the aeroelastic response and stability of large horizontal axis wind turbine blade. A new method of generating an appropriate time-dependent equilibrium position (required for the stability analysis) has been implemented. Representative steady-state responses and stability boundaries, applicable mainly to an existing blade design (NASA/-ERDA MOD-0), are presented. The results indicate that the MOD-0 configuration is a basically stable design and that blade stability is not sensitive to offsets between blade elastic axis and aerodynamic center. Blade stability appears to be sensitive to precone. The tower shadow (or wake) has a considerable effect on the flap response but leaves blade stability unchanged. Finally, it was found that non linear terms in the equations of motion can significantly affect the linearized stability boundaries, however, these terms have a negligible effect on blade response at operating conditions.

Kottapalli, S. B. R.↗

Assessment of Multiple Monitoring Methods for Detection of Brine and CO2 Leakage

We assess the effectiveness of four surface-based geophysical methods and in situ monitoring of pressure and chemical changes for detecting brine and CO2 leakage from legacy wells into underground sources of drinking water (USDW) overlying a CO2 storage reservoir. This is the first such effort to evaluate and compare six monitoring methods for detection of CO2 leakage. This assessment, conducted in support of the USDOE National Risk Assessment Partnership (NRAP), utilizes 3000 synthetic data sets, generated in an uncertainty quantification (UQ) model framework. This framework combines the results of (1) a CO2 storage reservoir model of a hypothetical storage operation of 5 MT/yr for 50 years into the 1700-m deep Vedder Fm. at a site near Kimberlina, California with (2) wellbore leakage models of a legacy well and (3) multi-phase flow and reactive transport models of brine and CO2 plume migration in aquifer layers overlying the storage reservoir. Leakage drives subsurface changes, quantified by pressure plumes, CO2-saturation plumes, and total dissolved solids (TDS) plumes, the latter being related to changes in pH and species concentrations. Depending on the depth of leakage, aquifer permeability, and regional groundwater gradient, pressure plume volumes can become larger than the CO2 and TDS plumes; however, reaching detectable thresholds may take too long to be useful. For a single monitoring well located 500 m downgradient of a leaky legacy well, a depth of 570 m is found to be optimal for sampling pressure and chemical changes. We assess four surface-based geophysical monitoring methods: electrical resistivity tomography (ERT), magnetotellurics (MT), gravity, and seismic methods. Sensors cover a 4-km × 2-km area. Both ERT and MT methods are sensitive to changes in CO2 saturation and TDS concentration, whereas gravity and seismic methods detect changes in CO2 saturation. The six monitoring methods complement each other in space and time, and we find that a minimum of 20 kT of CO2 leakage is required for the leakage plume to be detected. Of the four surface-based geophysical methods, gravity monitoring appears to be the most sensitive to CO2 leaks, while the usefulness of in situ pressure and chemical monitoring will depend on the level of unfilterable background noise. Geophysical monitoring methods may detect a leak anywhere in a large area and in a large depth range, but the effectiveness of pressure and chemical monitoring depends on the number of monitoring wells, where those wells are located, and the depth of sampling. Surface-based geophysical monitoring methods are cost-effective alternatives to in situ pressure and chemical monitoring methods.

NRAP, CCS, monitoring, geophysical methods, gravit↗

Impacts of sulfonic acids on fungal manganese oxide production

Microbial manganese (Mn) oxidation plays a critical role in Mn(III/IV) oxide formation in modern day environmental systems. These oxidation processes and resulting biominerals are sensitive to aqueous conditions, such as pH and dissolved constituent concentrations. With Mn and sulfur (S) biogeochemical cycling closely linked in many environmental systems, and dissolved organic sulfur comprising a substantial pool of total sulfur in several environments, the impact of dissolved organic sulfur compounds on Mn redox processes is important to consider. Sulfonic acids, environmentally ubiquitous organosulfur compounds, play substantial roles in S cycling in many natural and contaminated systems. Research to assess the effects of these abundant sulfonic acids on Mn biogeochemical cycling, microbial Mn oxidation processes, and Mn biominerals is needed for understanding and predicting the impact of coupled S and Mn biogeochemical cycles, particularly in environments with dynamic redox gradients or in anthropogenically contaminated systems. Further, with research on microbial and abiotic Mn oxidation processes often using aminosulfonic acids to control pH, understanding the impact of such sulfonic acids on microbial Mn oxidation processes is critical. Several recent studies found that commonly used zwitterionic N substituted aminosulfonic acids, known as Good’s buffers, such as HEPES and MES, can alter abiotic birnessite sheet structures. Here we investigate the impact of two sulfonic acids with broad applications to natural and contaminated sites as well as laboratory settings (HEPES and MES) on fungal Mn oxidation relative to a carbonate buffer and a buffer-free control by three Ascomycete fungi known to oxidize Mn(II): Stagonospora sp. SRC1lsM3a, Paraphaeosphaeria sporulosa AP3s5–JAC2a, and Plectosphaerella cucumerina DS2psM2a2. Structural analyses of the products show that sulfonic acids promote Mn oxidation by P. cucumerina, producing hexagonally symmetric phyllomanganates analogous to hexagonal birnessite or c–disordered H + birnessite [(Ca,Na,K)(Mn 4+ ,Mn 3+ ,$\square$)O 2 nH 2 O], with solid–associated Mn(II) bound to vacancy sites and biomass, while in their absence almost all Mn remains as either aqueous Mn(II) or solid–associated Mn(II) bound to biomass. In contrast, sulfonic acids exert the opposite effect on Mn oxidation by P. sporulosa, with their presence suppressing Mn(II) oxidation to Mn(IV), likely leading to the formation of mycogenic bixbyite (Mn 3+ 2 O 3 ) while the buffer–free control forms a poorly crystalline phyllo- or tectomanganate. Meanwhile, all treatments exert a minimal effect on Mn(II) uptake from solution and Mn oxidation with Stagonospora sp., with all experimental systems and controls forming poorly crystalline, hexagonally symmetric phyllomanganates. The fact that the sulfonic acids here studied exert similar effects on Mn oxidation, but substantially different effects for each fungus, suggests they affect Mn oxidation via mechanistically similar pathways that are likely dependent on interactions with fungal exudates (which vary from species to species) or specific fungal Mn oxidation processes. Interestingly, for all fungi, MES increases Mn(III) in the resulting biominerals, while the carbonate buffer consistently decreases Mn(III). Further, these results clearly demonstrate that sulfonic acids not only alter Mn oxide structures, as has been previously noted in abiotic studies, but can interfere with Mn oxidation reactions themselves, highlighting the incredible sensitivity of both Mn oxide structures and the Mn oxidation process to the aqueous environment.

58 GEOSCIENCES↗

Evaluation of Skylab IB sensitivity to on-pad winds with turbulence

Computer simulation was performed to estimate displacements and bending moments experienced by the SKYLAB 1B vehicle on the launch pad due to atmospheric winds. The vehicle was assumed to be a beam-like structure represented by a finite number of generalized coordinates. Wind flow across the vehicle was treated as a nonhomogeneous, stationary random process. Response computations were performed by the assumption of simple strip theory and application of generalized harmonic analysis. Displacement and bending moment statistics were obtained for six vehicle propellant loading conditions and four representative reference wind profile and turbulence levels. Means, variances and probability distributions are presented graphically for each case. A separate analysis was performed to indicate the influence of wind gradient variations on vehicle response statistics.

Coffin, T.↗

Mechanistic verification of empirical UO 2 fuel fracture models

Standard UO 2 fuel pellets used in light-water reactors fracture during irradiation due to the large thermal gradient in the radial direction. Over the decades, numerous researchers have explored fuel cracking from experimental and modeling points of view. To date, there have been both empirical and mechanistic approaches to predict the number of fragments that form in UO 2 . The empirical models only consider maximum power and burnup as inputs. Existing mechanistic approaches for normal operation have not accounted for irradiation effects. Here, this work employs a mechanistic fuel cracking model using the extended finite element method to explore radial crack formation while including a sensitivity analysis that accounts for the randomization of tensile strength within the fuel, the strength randomization criteria (uniform or volume-weighted Weibull), power ramping rates, computational mesh density, maximum power level, and irradiation (burnup) effects. The results indicate that the uncertainty in this mechanistic modeling approach envelopes the predicted values from three different empirical correlations in almost all cases. This means that, for computationally intensive analyses involving UO 2 fragmentation, the empirical correlations can be used. However, since the mechanistic calculations bound those of the empirical correlations, there is confidence in the applicability of the mechanistic approach developed in this work to generate a correlation for fuel types where limited data exists (e.g., doped-UO 2 , U 3 Si 2 ).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Oriented Morphology and Anisotropic Transport in Uniaxially Stretched Perfluorosulfonate Ionomer Membranes

Relations between morphology and transport sensitively govern proton conductivity in perfluorsulfonate ionomers (PFSIs) and thus determine useful properties of these technologically important materials. In order to understand such relations, we have conducted a broad systematic study of H{sup +}-form PFSI membranes over a range of uniaxial extensions and water uptakes. On the basis of small-angle X-ray scattering (SAXS) and {sup 2}H NMR spectroscopy, uniaxial deformation induces a strong alignment of ionic domains along the stretching direction. We correlate ionic domain orientation to transport using pulsed-field-gradient {sup 1}H NMR measurements of water diffusion coefficients along the three orthogonal membrane directions. Intriguingly, we observe that uniaxial deformation enhances water transport in one direction (parallel-to-draw direction) while reducing it in the other two directions (two orthogonal directions relative to the stretching direction). We evaluate another important transport parameter, proton conductivity, along two orthogonal in-plane directions. In agreement with water diffusion experiments, orientation of ionic channels increases proton conduction along the stretching direction while decreasing it in the perpendicular direction. These findings provide valuable fodder for optimal application of PFSI membranes as well as for the design of next generation polymer electrolyte membranes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗