Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Latticed-Confined Conversion Chemistry of Battery Electrode

The electrochemical conversion reaction, usually featured by multiple redox processes and high specific capacity, holds great promise in developing high energy rechargeable battery technologies. However, the complete structural change accompanied by spontaneous atomic migration and volume variation during the charge/discharge cycle leads to electrode disintegration and performance degradation, therefore severely restricting the application of conventional conversion-type electrodes. Herein, latticed-confined conversion chemistry is proposed, where the “intercalation-like” redox behavior is realized on the electrode with a “conversion-like” high capacity. By delicately formulating the high-entropy compounds, the pristine crystal structure can be preserved by the inert lattice framework, thus enabling an ultra-high initial Coulombic efficiency of 92.5% and a long cycling lifespan over a thousand cycles after the quasistatic charge–discharge cycle. This lattice-confined conversion chemistry unfolds a ubiquitous insight into the localized redox reaction and sheds light on developing high-performance electrodes toward next-generation high-energy rechargeable batteries.

25 ENERGY STORAGE↗

Exploring the Origin of Anionic Redox Activity in Super Li-Rich Iron Oxide-Based High-Energy-Density Cathode Materials

Super alkali-rich materials (alkali:transition metal ratio of ≥2:1), such as Li 5 FeO 4 , exhibit the potential to realize anionic redox upon deep delithiation. Li 5 FeO 4 was shown to undergo reversible cycling between Li 4 FeO 3.5 and Li 3 FeO 3.5 with combined cation/anion redox, a remarkable capacity of 189 mAh/g, and no O 2 release. However, the impact of phase transformations on the reaction thermodynamics and the correlation between the structural changes and reaction reversibility remain unclear. In this study, we use first-principles calculations to examine the delithiation and (re)lithiation reactions of Li 5 FeO 4 . We show that the experimentally observed charge and discharge processes go through non-equilibrium pathways. Upon delithiation, the compound undergoes a phase transformation from Li 5 FeO 4 , with tetrahedrally coordinated (T d ) Fe ions, to a delithiated disordered rocksalt structure, with octahedral (O h ) Fe ions. Fe-ion migration has an asymmetric kinetic barrier that makes T d → O h migration facile, whereas the reverse process has a much larger barrier, explaining the difficulties in reaction reversibility. We further elucidate the transition metal and O redox sequences during the charge cycle and identify the complex electrochemistry associated with the dual participation of cationic redox (Fe 3+ /Fe 4+ ) and anionic redox (O 2– /O – /O o ). Armed with this knowledge, we conduct high-throughput screening of known alkali-rich transition metal oxides by evaluating their potential to enable reversible anionic redox, with multiple candidates proposed for further experimental trials. Furthermore, our work provides a useful guide for the further development of super alkali-rich anionic-redox-active electrodes for high-energy-density batteries.

25 ENERGY STORAGE↗

Calorimetry-Derived Composition Vectors to Resolve Component Raman Spectra in Phospholipid Phase Transitions

Multidimensional least squares analysis is a well-established technique for resolving component vibrational spectra from mixed samples or systems. Component resolution of temperature-dependent vibrational spectra is challenging, however, due to the lack of a suitable model for the variation in sample composition with temperature. In this work, analysis of temperature-dependent Raman spectra of lipid membranes is accomplished by using “concentration” vectors independently derived from enthalpy changes determined by differential scanning calorimetry. Specifically, the lipid–bilayer phase transitions of DMPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) are investigated through Raman spectra acquired from individual, optically trapped vesicles in suspension as a function of temperature. Heat capacity profiles of the same vesicle suspension are measured using differential scanning calorimetry and numerically integrated to generate enthalpy change curves of each phase transition, which are in turn used to construct composition vectors. Multidimensional least squares analysis optimized for a fit to these composition vectors allows resolution of the component spectra corresponding to gel, ripple, and liquid–crystalline phases of the DMPC. The quality of fit of the calorimetry-derived results is confirmed by unstructured residual differences between the data and the model, and a composition variation predicted by the resolved spectra that matches the calorimetry results. Furthermore, this approach to analysis of temperature-dependent spectral data could be readily applied in other areas of materials characterization, where one is seeking to learn about structural changes that occur through temperature-dependent phase transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability

Soft magnetic materials (SMMs) find important applications in a number of areas. The diverse requirements for these applications are often demanding and challenging for the design and fabrication of SMMs. Here we report a new class of FeCoNi(AlSi)x (0 # x # 0.8 in molar ratio) SMMs based on high-entropy alloys (HEAs). It is found that with the compositional and structural changes, the optimal balance of magnetic, electrical, and mechanical properties is achieved at x 5 0.2, for which the combination of saturation magnetization (1.15 T), coercivity (1,400 A/m), electrical resistivity (69.5 mΩ-cm), yield strength (342 MPa), and strain without fracture (50%) makes the alloy an excellent SMM. Ab initio calculations are used to explain the high magnetic saturation of the present HEAs and the effects of compositional structures on magnetic characteristics. The HEA-based SMMs point to new directions in both the application of HEAs and the search for novel SMMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functional and Structural Impact of Target Uridine Substitutions on the H/ACA Ribonucleoprotein Particle Pseudouridine Synthase

Box H/ACA ribonucleoprotein protein particles catalyze the majority of pseudouridylation in functional RNA. Different from stand alone pseudouridine synthases, the RNP pseudouridine synthase comprises multiple protein subunits and an RNA subunit. Previous studies showed that each subunit, regardless its location, is sensitive to the step of subunit placement at the catalytic center and potentially to the reaction status of the substrate. Here we describe the impact of chemical substitutions of target uridine on enzyme activity and structure. We found that 3-methyluridine in place of uridine inhibited its isomerization while 2{prime}-deoxyuridine or 4-thiouridine did not. Significantly, crystal structures of an archaeal box H/ACA RNP bound with the nonreactive and the two postreactive substrate analogues showed only subtle structural changes throughout the assembly except for a conserved tyrosine and a substrate anchoring loop of Cbf5. Our results suggest a potential role of these elements and the subunit that contacts them in substrate binding and product release.

36 MATERIALS SCIENCE↗

Chemical and Hydrostatic Pressure in Natrolites: Pressure Induced Hydration of an Aluminogermanate Natrolite

The ambient structure and pressure-induced structural changes of a synthetic sodium aluminogermanate with a natrolite (NAT) framework topology (Na-AlGe-NAT) were characterized by using Rietveld refinements of high-resolution synchrotron X-ray powder diffraction data at ambient and high pressures. Unlike a previously established model for Na{sub 8}Al{sub 8}Ge{sub 12}O{sub 40} {center_dot} 8H{sub 2}O based on a single-crystal study, the ambient structure of the Na-AlGe-NAT is found to adopt a monoclinic space group Cc (or Fd) with a ca. 6% expanded unit cell. The refined ambient structure of Na{sub 8}Al{sub 8}Ge{sub 12}O{sub 40} {center_dot} 12H{sub 2}O indicates an increased water content of 50%, compared to the single-crystal structure. The unit-cell volume and water-content relationships observed between the two Na-AlGe-NAT structures at ambient conditions with 8 and 12 H{sub 2}O respectively seem to mirror the ones found under hydrostatic pressure between the Na{sub 8}Al{sub 8}Ge{sub 12}O{sub 40} {center_dot} 8H{sub 2}O and the parantrolite phase Na{sub 8}Al{sub 8}Ge{sub 12}O{sub 40} {center_dot} 12H{sub 2}O. Under hydrostatic pressures mediated by a pore-penetrating alcohol and water mixture, the monoclinic Na-AlGe-NAT exhibits a gradual decrease of the unit-cell volume up to ca. 2.0 GPa, where the unit-cell volume then contracts abruptly by ca. 4.6%. This is in marked contrast to what is observed in the Na-AlSi-NAT and Na-GaSi-NAT systems, where one observes a pressure-induced hydration and volume expansion due to the auxetic nature of the frameworks. Above 2 GPa, the monoclinic phase of Na-AlGe-NAT transforms into a tetragonal structure with the unit-cell composition of Na{sub 8}Al{sub 8}Ge{sub 12}O{sub 40} {center_dot} 16H{sub 2}O, revealing pressure-induced hydration and a unit cell volume contraction. Unlike in the Na-Al,Si-paranatrolite phase, however, the sodium cations in the Na-AlGe-NAT maintain a 6-fold coordination in the monoclinic structure and only become 7-fold coordinated at higher pressures in the tetragonal structure. When comparing the pressure-induced hydration in the observed natrolite-type zeolites, Na-AlGe-NAT appears to have a nonauxetic framework and reveals the highest onset pressure for complete superhydration.

43 PARTICLE ACCELERATORS↗

High-fidelity, hyper-accurate, and evolved mutants rewire atomic-level communication in CRISPR-Cas9

The high-fidelity (HF1), hyper-accurate (Hypa), and evolved (Evo) variants of the CRISPR-associated protein 9 (Cas9) endonuclease are critical tools to mitigate off-target effects in the application of CRISPR-Cas9 technology. The mechanisms by which mutations in recognition subdomain 3 (Rec3) mediate specificity in these variants are poorly understood. Here, solution nuclear magnetic resonance and molecular dynamics simulations establish the structural and dynamic effects of high-specificity mutations in Rec3, and how they propagate the allosteric signal of Cas9. We reveal conserved structural changes and dynamic differences at regions of Rec3 that interface with the RNA:DNA hybrid, transducing chemical signals from Rec3 to the catalytic His-Asn-His (HNH) domain. The variants remodel the communication sourcing from the Rec3 α helix 37, previously shown to sense target DNA complementarity, either directly or allosterically. This mechanism increases communication between the DNA mismatch recognition helix and the HNH active site, shedding light on the structure and dynamics underlying Cas9 specificity and providing insight for future engineering principles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct Structural Identification of Gas Induced Gate‐Opening Coupled with Commensurate Adsorption in a Microporous Metal–Organic Framework

Abstract Gate‐opening is a unique and interesting phenomenon commonly observed in flexible porous frameworks, where the pore characteristics and/or crystal structures change in response to external stimuli such as adding or removing guest molecules. For gate‐opening that is induced by gas adsorption, the pore‐opening pressure often varies for different adsorbate molecules and, thus, can be applied to selectively separate a gas mixture. The detailed understanding of this phenomenon is of fundamental importance to the design of industrially applicable gas‐selective sorbents, which remains under investigated due to the lack of direct structural evidence for such systems. We report a mechanistic study of gas‐induced gate‐opening process of a microporous metal–organic framework, [Mn(ina) 2 ] (ina=isonicotinate) associated with commensurate adsorption, by a combination of several analytical techniques including single crystal X‐ray diffraction, in situ powder X‐ray diffraction coupled with differential scanning calorimetry (XRD‐DSC), and gas adsorption–desorption methods. Our study reveals that the pronounced and reversible gate opening/closing phenomena observed in [Mn(ina) 2 ] are coupled with a structural transition that involves rotation of the organic linker molecules as a result of interaction of the framework with adsorbed gas molecules including carbon dioxide and propane. The onset pressure to open the gate correlates with the extent of such interaction.

Banerjee, Debasis↗

Irradiation-induced formation of a spinel phase at the FeCr/MgO interface

Oxide dispersion strengthened ferritic/martensitic alloys have attracted significant attention for their potential uses in future nuclear reactors and storage vessels, as the metal/oxide interfaces act as stable high-strength sinks for point defects while also dispersing helium. Here, in order to unravel the evolution and interplay of interface structure and chemistry upon irradiation in these types of materials, an atomically sharp FeCr/MgO interface was synthesized at 500 °C and separately annealed and irradiated with Ni 3+ ions at 500 °C. After annealing, a slight enrichment of Cr atoms was observed at the interface, but no other structural changes were found. However, under irradiation, sufficient Cr diffuses across the interface into the MgO to form a Cr-enriched transition layer that contains spinel precipitates. First-principles calculations indicate that it is energetically favorable to incorporate Cr, but not Fe, substitutionally into MgO. Furthermore, our results indicate that irradiation can be used to form new phases and complexions at interfaces, which may have different radiation tolerance than the pristine structures.

36 MATERIALS SCIENCE↗

Heterotropic roles of divalent cations in the establishment of allostery and affinity maturation of integrin αXβ2

Allosteric activation and silencing of leukocyte β2-integrins transpire through cation-dependent structural changes, which mediate integrin biosynthesis and recycling, and are essential to designing leukocyte-specific drugs. Stepwise addition of Mg 2+ reveals two mutually coupled events for the αXβ2 ligand-binding domain—the αX I-domain—corresponding to allostery establishment and affinity maturation. Electrostatic alterations in the Mg 2+ -binding site establish long-range couplings, leading to both pH- and Mg 2+ -occupancy-dependent biphasic stability change in the αX I-domain fold. The ligand-binding sensorgrams show composite affinity events for the αX I-domain accounting for the multiplicity of the αX I-domain conformational states existing in the solution. On cell surfaces, increasing Mg 2+ concentration enhanced adhesiveness of αXβ2. This work highlights how intrinsically flexible pH- and cation-sensitive architecture endows a unique dynamic continuum to the αI-domain structure on the intact integrin, thereby revealing the importance of allostery establishment and affinity maturation in both extracellular and intracellular integrin events.

36 MATERIALS SCIENCE↗

How Anion Chaotrope Changes the Local Structure of Water. Insights from Photoelectron Spectroscopy and Theoretical Modeling of SCN - Water Clusters

The behavior of charged solute molecules in aqueous solutions is often classified using the concept of kosmotropes (“structure makers”) and chaotropes (“structure breakers”). There is a growing consensus that the key to kosmotropic/chaotropic behaviors lies in the local solvent region, but the exact microscopic basis for such differentiation is not well understood. This issue is examined in this work by analyzing size selective solvation of a well-known chaotrope, negatively charged SCN - molecule. Combining experimental photoelectron spectroscopy measurements with theoretical modeling we examine evolution of solvation structure up to eight waters. We observe that SCN - indeed fits the description of weakly hydrated ion and its solvation is heavily driven by stabilization of water-water interaction network. However, the impact on water structure is more subtle than that associated with “structure breaker”. In particular, we observe that the solvation structure of SCN - preserves the “packing” structure of the water network but changes local directionality of hydrogen bonds in the local solvent region. The resulting effect closer to that of “structure weakener”, where solute can be readily accommodated into the native water network, at the cost of compromising its stability due to constraints on hydrogen bonding.

74 ATOMIC AND MOLECULAR PHYSICS↗

Anisotropic Dynamics and Mechanics of Macromolecular Crystals Containing Lattice-Patterned Polymer Networks

The mechanical and functional properties of many crystalline materials depend on cooperative changes in lattice arrangements in response to external perturbations. However, the flexibility and adaptiveness of crystalline materials are limited. Additionally, the bottom-up, molecular-level design of crystals with desired dynamic and mechanical properties at the macroscopic level remains a considerable challenge. To address these challenges, we had previously integrated mesoporous, cubic ferritin crystals with hydrogel networks, resulting in hybrid materials (polymer integrated crystals or PIX) which could undergo dramatic structural changes while maintaining crystalline periodicity and display efficient self-healing. Here, the dynamics and mechanics of these ferritin-PIX were devoid of directionality, which is an important attribute of many molecular and macroscopic materials/devices. In this study, we report that such directionality can be achieved through the use of ferritin crystals with anisotropic symmetries (rhombohedral or trigonal), which enable the templated formation of patterned hydrogel networks in crystallo. The resulting PIX expand and contract anisotropically without losing crystallinity, undergo prompt bending motions in response to stimuli, and self-heal efficiently, capturing some of the essential features of sophisticated biological devices like skeletal muscles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamics, dynamics, and structure of supercritical water at extreme conditions

Molecular dynamics (MD) simulations to understand the thermodynamic, dynamic, and structural changes in supercritical water across the Frenkel line and the melting line have been performed. The two-phase thermodynamic model [J. Phys. Chem. B(2010), 114(24), 8191-8198] and the velocity autocorrelation functions are used to locate the Frenkel line and to calculate the thermodynamic and dynamic properties. The Frenkel lines obtained from the two-phase thermodynamic model and the velocity autocorrelation criterion do not agree with each other. Structural characteristics and the translational diffusion dynamics of water suggest that this inconsistency could arise from the two oscillatory modes in water, which are associated with the bending of hydrogen bonds and intermolecular collisions inside the first coordination shell. Finally, the overall results lead us to conclude that the universality of the Frenkel line as a dynamic crossover line from rigid to nonrigid fluids is preserved in water.

74 ATOMIC AND MOLECULAR PHYSICS↗

Swift heavy-ion irradiation-induced shape and structural transformation in cobalt nanoparticles

The shape and structural evolution of Co nanoparticles embedded in SiO{sub 2} and subjected to swift heavy-ion irradiation have been investigated over a wide energy and fluence range. Modifications of the nanoparticle size and shape were characterized with transmission electron microscopy and small-angle x-ray scattering. Nanoparticles below a threshold diameter remained spherical in shape and progressively decreased in size under irradiation due to dissolution. Nanoparticles above the threshold diameter transformed into nanorods with their major dimension parallel to the incident ion direction. Modifications of the atomic-scale structure of the Co nanoparticles were identified with x-ray absorption spectroscopy. Analysis of the x-ray absorption near-edge spectra showed that prior to irradiation all Co atoms were in a metallic state, while after irradiation Co atoms were in both oxidized and metallic environments, the former consistent with dissolution. The evolution of the nanoparticle short-range order was determined from extended x-ray absorption fine structure spectroscopy. Structural changes in the Co nanoparticles as a function of ion fluence included an increase in disorder and asymmetric deviation from a Gaussian interatomic distance distribution coupled with a decrease in bondlength. Such changes resulted from the irradiation-induced decrease in nanoparticle size and subsequent dissolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the advanced organosolv pretreatment strategies on structural properties of woody biomass

Plants have evolved their lignocellulosic cell walls through complex structural and chemical mechanisms to protect itself against microbial attacks, which makes native lignocellulosic biomass recalcitrant to enzymatic deconstruction. Pretreatment is a crucial step in the biological conversion of biomass as it can render structural changes in the plant cell wall to reduce the biomass recalcitrance, thus enhancing its sugar release performance. There have been many efforts to develop effective pretreatment technologies to overcome the biomass recalcitrance with a primary focus on the efficient conversion of biomass carbohydrates to liquid fuels, while lignin is significantly underutilized despite its bulk amount and high-value opportunities. In this study, the effects of two recent organosolv pretreatment strategies, co-solvent enhanced lignocellulosic fractionation (CELF) and γ-Valerolactone (GVL) pretreatments, on physicochemical properties of poplar were investigated and compared with the effects of conventional ethanol organosolv pretreatment. Diverse physicochemical properties of biomass including chemical compositions, molecular weights of cellulose and lignin, aromatics and inter-unit linkages of lignin, lignin hydroxyl group contents, cellulose crystallinity, and accessible surface area of cellulose were analyzed before and after pretreatments. The results revealed how each organic solvent pretreatment system affected biomass structural characteristics and recalcitrance.

Meng, Xianzhi↗

Effects of solvent formulations in electrolytes on fast charging of Li-ion cells

Improving the fast charging performance of lithium ion batteries (LIBs) has the promise to increase the widespread adoption of electric vehicles (EVs). Electrolyte development plays an important role in enabling fast charging. In this study, fast charging performance of LIBs is studied with different electrolytes of 1.2 M LiPF 6 in Ethylene Carbonate (EC)/Ethyl Methyl Carbonate (EMC)/co-solvents at 30/50/20 wt%. The co-solvents are methyl acetate (MA), ethyl acetate (EA), ethyl formate (EF), dimethyl carbonate (DMC) and EMC. Long term cycling performance under fast charging shows different capacity retention behaviors for different co-solvents. The structural changes in the electrode material are studied by X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD). The molarity changes in electrolyte is investigated by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The electrode/electrolyte interfaces before and after fast charging are analyzed by X-ray photoemission spectroscopy (XPS). The characterization results are in good agreement with the long-term cycling performance. DMC shows the highest fast-charging capability among the five studied co-solvents due to its increased conductivity, improved electrode/electrolyte interface and stable electrode structural integrity.

25 ENERGY STORAGE↗

The X-ray Crystal Structure of the Phage Tail Terminator Protein Reveals the Biologically Relevant Hexameric Rang Structure and Demonstrates a Conserved mechanism of Tail Termination among Divrse Long Tailed Phages

The tail terminator protein (TrP) plays an essential role in phage tail assembly by capping the rapidly polymerizing tail once it has reached its requisite length and serving as the interaction surface for phage heads. Here, we present the 2.7-A crystal structure of a hexameric ring of gpU, the TrP of phage ?. Using sequence alignment analysis and site-directed mutagenesis, we have shown that this multimeric structure is biologically relevant and we have delineated its functional surfaces. Comparison of the hexameric crystal structure with the solution structure of gpU that we previously solved using NMR spectroscopy shows large structural changes occurring upon multimerization and suggests a mechanism that allows gpU to remain monomeric at high concentrations on its own, yet polymerize readily upon contact with an assembled tail tube. The gpU hexamer displays several flexible loops that play key roles in head and tail binding, implying a role for disorder-to-order transitions in controlling assembly as has been observed with other ? morphogenetic proteins. Finally, we have found that the hexameric structure of gpU is very similar to the structure of a putative TrP from a contractile phage tail even though it displays no detectable sequence similarity. This finding coupled with further bioinformatic investigations has led us to conclude that the TrPs of non-contractile-tailed phages, such as ?, are evolutionarily related to those of contractile-tailed phages, such as P2 and Mu, and that all long-tailed phages may utilize a conserved mechanism for tail termination.

36 MATERIALS SCIENCE↗

Pressure-induced phase transitions in multiferroic RbFe(MoO{sub 4}){sub 2}-Raman scattering study

High pressure Raman scattering experiments were performed on RbFe(MoO{sub 4}){sub 2}. These experiments revealed that two phase transitions take place in RbFe(MoO{sub 4}){sub 2} at very low pressures, i.e. between ambient pressure and 0.2 GPa and between 0.4 and 0.7 GPa. Raman results showed that at the first phase transition the room temperature P3-bar m1 phase transforms into the P3-bar phase, which is also observed at ambient pressure below 190 K. The second pressure-induced phase transition occurs into a low symmetry phase of unknown symmetry. The performed lattice dynamics calculations for the P3-bar m1 phase and ab initio calculation of the structural changes under hydrostatic pressure helped us to get better insights into the mechanism of the observed phase transitions. - Graphical abstract: Raman spectra of RbFe(MoO{sub 4}){sub 2} crystal in the high wavenumber region recorded at different pressures during compression experiment. Highlights: > RbFe(MoO{sub 4}){sub 2} exhibits two pressure-induced phase transitions below 0.7 GPa. > First phase transition is from the P3-bar m1 into P3-bar structure. > Phase transitions in RbFe(MoO{sub 4}){sub 2} are similar as in KFe(MoO{sub 4}){sub 2}. > Transitions' pressures are much lower for the rubidium compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗