Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2027

Low thermal budget dopant activation in shallow junctions of implanted Si via Tunable plasma enhanced annealing

Low thermal budget (LTB) annealing has become increasingly critical for shallow junctions as semiconductor devices are scaled down. Plasma Enhanced Annealing (PEA) has emerged as a promising LTB annealing process, however its mechanisms remain unclear. In this study, arsenic and boron implanted silicon wafers were subjected to helium or argon ion bombardment generated by annealing plasmas under controlled ion energies and doses in a home-built annealing reactor. The structural and electrical changes were characterized by four-point probe measurements, secondary ion mass spectrometry, Raman spectroscopy and spectroscopic ellipsometry. A pronounced reduction in sheet resistance, accompanied by a decrease in the damage layer thickness demonstrates the surface selective annealing capability of PEA process. Comparative studies using He and Ar plasmas and related ion bombardment reveal a dependence of activation efficacy on both ion species and the dopant implantation profile. Furthermore, a multi-step annealing mechanism is proposed, consisting of an initial (low dose) structural recovery stage followed by the generation of “extended” defects and concluded at large doses by an enhanced dopant activation. The proposed annealing kinetics are thought to be controlled by ion flux, dose and energy. Finally, these results highlight PEA as an effective, surface-selective, LTB approach for shallow-dopant activation and near surface annealing, and provide mechanistic insights into PEA processes.

dopant activation↗
DOE OSTI2013

In situ atomic force microscope study of high-temperature untwinning surface relief in Mn-Fe-Cu antiferromagnetic shape memory alloy

The N-type untwinning surface relief associated with the fcc {r_reversible} fct martensitic transformation (MT) was observed in the Mn{sub 81.5}Fe{sub 14.0}Cu{sub 4.5} antiferromagnetic high-temperature shape memory alloy (SMA) by in situ atomic force microscopy. The measured untwinning relief angles ({theta}{sub {alpha}} Double-Vertical-Line {theta}{sub {beta}}) at the ridge and at the valley were different, and both angles were less than the conventional values. The surface relief exhibited good reversibility during heating and cooling because of the crystallographic reversibility of thermal-elastic SMAs. Untwinning shear was proposed as the main mechanism of the N-type surface relief. The order of the reverse MT was discussed based on the experimental measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Two-Dimensional Crystallization of Poly( N -isopropylacrylamide)-Capped Gold Nanoparticles

Surface-sensitive X-ray reflectivity and grazing incidence small-angle X-ray scattering reveal the structure of polymer-capped-gold nanoparticles (AuNPs that are grafted with poly(N-isopropylacrylamide); PNIPAM–AuNPs) as they self-assemble and crystallize at the aqueous suspension/vapor interface. Citrate-stabilized AuNPs (5 and 10 nm in nominal diameter) are ligand-exchanged by 6 kDa PNIPAM-thiol to form corona brushes around the AuNPs that are highly stable and dispersed in aqueous suspensions. Surprisingly, no clear evidence of thermosensitive effect on surface enrichment or self-assembly of the PNIPAM–AuNPs is observed in the 10–35 °C temperature range. However, addition of simple salts (in this case, NaCl) to the suspension induces migration of the PNIPAM–AuNPs to the aqueous surface, and above a threshold salt concentration, two-dimensional crystals are formed. In conclusion, the 10 nm PNIPAM–AuNPs form a highly ordered single layer with in-plane triangular structure, whereas the 5 nm capped NPs form short-range triangular structure that gradually becomes denser as salt concentration increases.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Low temperature aging in a molecular glass: the case of cis -methyl formate

Glassy films of cis-methyl formate show spontaneous dipole orientation on deposition from the vacuum, the so-called ‘spontelectric effect’, creating surface potentials and electric fields within the films. We follow the decay of these fields, and their accompanying dipole orientation, on the hours timescale at deposition temperatures between 40 K and 55 K. Our data trace the low temperature ‘secondary decay’ mechanism, at tens of degrees below the glass transition temperature of 90 K. We show that secondary decay is due to molecular rotation, with associated activation energies lying between 0.1 and 0.2 eV. Diffusion is absent, as established from published neutron reflectivity data. Using an analytical model for the spontelectric effect, data are placed on a quantitative footing, showing that angular motion in excess of 50° reproduces the observed values of activation energies. Exploitation of the spontelectric effect is new in the study of glass aging and is shown here to give insight into the elusive processes which take place far from the molecular glass transition temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Secondary-electron emission from hydrogen-terminated diamond

Diamond amplifiers demonstrably are an electron source with the potential to support high-brightness, high-average-current emission into a vacuum. We recently developed a reliable hydrogenation procedure for the diamond amplifier. The systematic study of hydrogenation resulted in the reproducible fabrication of high gain diamond amplifier. Furthermore, we measured the emission probability of diamond amplifier as a function of the external field and modelled the process with resulting changes in the vacuum level due to the Schottky effect. We demonstrated that the decrease in the secondary electrons average emission gain was a function of the pulse width and related this to the trapping of electrons by the effective NEA surface. The findings from the model agree well with our experimental measurements. As an application of the model, the energy spread of secondary electrons inside the diamond was estimated from the measured emission.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

Structural levels of deformation and failure of heat-resistant 12Cr1MoV steel modified by vacuum arc treatment by Zr{sup +} ion beam

Study of structural changes occurring in the surface layer modified by ion-beam irradiation was carried out by means of optical, scanning and transmission electron microscopy. It was shown that irradiation induces the structure modification not only in the surface layer, but along the entire cross section of 1 mm thick specimens. It was elucidated that the complex pattern of structural changes is responsible for the pronounced variation of mechanical properties taking place under static tension and cyclic alternating bending.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Local field enhancement on metallic periodic surface structures produced by femtosecond laser pulses

Periodic surface structures on aluminium are produced by femtosecond laser pulses for efficient excitation of surface electromagnetic waves using a strong objective (NA = 0.5). The local electromagnetic field enhancement on the structures is measured using the technique of surface-enhanced Raman scattering from pyridine molecules. (extreme light fields and their applications)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2011

Formation of metallic colloids in CaF{sub 2} by intense ultraviolet light

Highest purity CaF{sub 2} single crystals are irreversibly modified when irradiated with millions of pulses of 193 nm light at fluences of 120 mJ/cm{sup 2}. Mie theory explains the observed haze by attributing the wavelength dependent extinction and the ratio between absorption and scattering to metallic colloids with radii in the range of 20 to 30 nm and a fractional volume of up to 2.8{center_dot}10{sup -7}. Non-contact scanning force microscopy (NC-AFM) measurements performed on a surface produced by in-vacuo cleavage reveals that laser irradiation additionally produces a 10{sup 4} times higher volume density of colloids with a radius of 1 to 2 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Emergence and consequences of lateral sample heterogeneity in glow discharge spectrometry

We report conventional glow discharge emission or mass spectrometry requires the assumption that the surface of the sample is homogeneous. However, recent developments in glow discharge imaging appear to offer an opportunity to obtain three-dimensional concentration maps, in which this assumption is no longer necessary. Here, experiments, models, and a summary of earlier work are combined to examine the sputtering behavior of elemental and morphological heterogeneities in a sample. The theoretical model reveals gaps in current knowledge of glow discharge sputtering of heterogeneous samples, particularly indicating that heterogeneity in the sample leads to roughened crater bottoms and how additional morphology can evolve. Additionally, a three-dimensional profiling microscope is used to characterize the effects of surface inclusions on the sputtering process in a DC glow discharge in a reduced-pressure argon environment. Findings have important implications for bulk analysis, depth-profiling, and elemental surface mapping with glow discharge spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Measurements of low-energy electron reflection at a plasma boundary

It is demonstrated that low-energy (<3 eV) electron reflection from a solid surface in contact with a low-temperature plasma can have significant variation with time. An uncontaminated, i.e., “clean,” metallic surface (just after heating up to glow) in a plasma environment may have practically no reflection of low-energy incident electrons. However, a contaminated, i.e., “dirty,” surface (in some time after cleaning by heating) that has a few monolayers of absorbent can reflect low-energy incident electrons and therefore significantly affect the net electron current collected by the surface. This effect may significantly change plasma properties and should be taken into account in plasma experiments and models. A diagnostic method is demonstrated for measurements of low-energy electron absorption coefficient in plasmas with a mono-energetic electron group.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analysis of dislocation configurations in SiC crystals through X-ray topography aided by ray tracing simulations

Silicon carbide as a wide bandgap semiconductor is of great research interest for its widespread deployment in a range of electronic and optoelectronic devices, particularly in power electronics. However, defects in silicon carbide crystals are still major concerns that is hampering the development of high-performance devices. X-ray topography, particularly using the synchrotron beam has been instrumental in characterizing and analyzing defect configurations in silicon carbide crystals to optimize crystal growth as well as understand the effect of defects on device performance. Here, in recent years, the use of ray-tracing simulation technique based on the orientation contrast mechanism to simulate contrast of defects observed on actual X-ray topographs has proven to be an effective approach to investigate the nature of crystallographic defects in various semiconductors. This review discusses the principle of ray-tracing simulation and its application and modifications to incorporate the effects of surface relaxation and photoelectric absorption to better simulate different dislocations observed in 4H–SiC as well as 6H–SiC crystals of various orientations. The adaptation to weak beam topography and plane wave topography is also discussed. The application of ray-tracing simulation in dislocation characterization of silicon carbide of different polytypes is systematically reviewed including different types of dislocations observed in both off-axis wafers and axial-sliced samples through synchrotron X-ray topography under various beam conditions, recording geometries and reflections. The result of ray-tracing simulation is further utilized in other studies including the investigation of effective penetration depth of all types of dislocations lying on the basal plane on grazing-incidence X-ray topography.

Engineering↗
DOE OSTI2024

Stress localization investigation of additively manufactured GRCop-42 thin-wall structure

A full-field crystal plasticity (CP) framework is presented for the GRCop-42 alloy to study microscopic mechanical behavior and local stress heterogeneities. The microstructures of additively manufactured (AM) materials are often unique relative to conventionally processed materials, and the local thermal histories drive these differences during the build process. These thermal histories depend on the process parameters (laser power, scan speed, and scan strategy) and the part geometry. Prior research has shown that the mechanical properties of thin-walled structures can vary significantly with wall thickness due to changes in the thermal boundary conditions during manufacturing. It is, therefore, desirable to perform CP simulations based on the phenomenological constitutive model to predict the local mechanical responses induced by microstructural heterogeneities. This work generates representative microstructures based on experimentally collected grain information (i.e., texture) for grain scale stress analysis, and the material constitutive parameters are calibrated using the experimental mechanical testing data. Here, we specifically investigated the effect of crystallographic texture and grain morphologies on the size-dependent mechanical properties of AM GRCop-42. The selection of appropriate material properties for implementing an effective free surface boundary condition and the influence of adjacent buffer layers are also discussed. Analysis of local field results reveals a strong correlation between stress localization and the initial grain orientation. However, no significant relationship between the misorientation of the individual adjacent grains and the average misorientation is observed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Novel Surface Restoration Method for Hydropower Steel Components: Plasma Gouging and Inconel Cold Spray Coating for Material Repair

A novel surface restoration approach combining plasma gouging with subsequent cold spray deposition is demonstrated in this study. Plasma gouging effectively removes the damaged steel surface, leaving grooves and forming a plasma gouging affected zone up to ~300?µm thick. Within this zone, a hardened martensitic layer with a peak hardness of ~370?HV—almost twice that of the base substrate (~200?HV)—is produced. Following plasma gouging, cold spray deposition is applied to rebuild the surface. Experimental results reveal that cold spray coatings deposited at low energy suffer from delamination, whereas high energy cold spray deposits yield a well-bonded coating. Microstructural analysis further shows that the martensitic layer formed by plasma gouging undergoes dynamic recrystallization during cold spray, reducing the hardness to 317?HV. These findings demonstrate the feasibility of this hybrid method for effective surface restoration of damaged steel components.

Wang, Tianhao↗
DOE OSTI2016

Differentiation of surface and bulk conductivities in topological insulator via four-probe spectroscopy

Topological insulators, with characteristic topological surface states, have emerged as a new state of matter with rich potentials for both fundamental physics and device applications. However, the experimental detection of the surface transport has been hampered by the unavoidable extrinsic conductivity associated with the bulk crystals. Here we show that a four-probe transport spectroscopy in a multi-probe scanning tunneling microscopy system can be used to differentiate conductivities from the surface states and the coexisting bulk states in topological insulators. We derive a scaling relation of measured resistance with respect to varying inter-probe spacing for two interconnected conduction channels, which allows quantitative determination of conductivities from both channels. Using this method, we demonstrate the separation of 2D and 3D conduction in topological insulators by comparing the conductance scaling of Bi 2 Se 3 , Bi 2 Te 2 Se, and Sb-doped Bi 2 Se 3 with that of a pure 2D conductance of graphene on SiC substrate. We also report the 2D conductance enhancement due to the surface doping effect in topological insulators. This technique can be applied to reveal 2D to 3D crossover of conductance in other complex systems.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Study of the crystal device for deflecting high-energy proton beams using synchrotron radiation diffraction

Currently, bent silicon single crystals are used at large accelerators to extract and collimate proton beams. A device for multiple deflection of a proton beam based on several bent silicon strips operating in the volume reflection mode has recently been developed. In this device, the bending of silicon strips successively located on the surface of a thick plate is implemented due to the internal stress induced by grooves mechanically formed on the crystal surface (Twyman effect). Topography based on angular scanning and synchrotron radiation was applied to measure the bending of individual deflector strips and the crystal as a whole. The measurement results are compared with the data obtained with a proton beam.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Enhanced anomalous photo-absorption from TiO{sub 2} nanostructures

Two dimensional nanostructures have been created on the rutile TiO{sub 2} (110) surfaces via ion irradiation technique. Enhanced anomalous photo- absorption response is displayed, where nanostructures of 15 nm diameter with 0.5 nm height, and not the smaller nanostructures with larger surface area, delineate highest absorbance. Comprehensive investigations of oxygen vacancy states, on ion- irradiated surfaces, display a remarkable result that the number of vacancies saturates for higher fluences. A competition between the number of vacancy sites on the nanostructure in conjunction with its size is responsible for the observed anomalous photo-absorption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Pattern Effects of Soil on Photovoltaic Surfaces

The texture or patterning of soil on PV surfaces may influence light capture at various angles of incidence (AOI). Accumulated soil can be considered a microshading element, which changes with respect to AOI. Laboratory deposition of simulated soil was used to prepare test coupons for simultaneous AOI and soiling loss experiments. A mixed solvent deposition technique was used to consistently deposit patterned test soils onto glass slides. Transmission decreased as soil loading and AOI increased. Dense aggregates significantly decreased transmission. But, highly dispersed particles are less prone to secondary scattering, improving overall light collection. In order to test AOI losses on relevant systems, uniform simulated soil coatings were applied to split reference cells to further examine this effect. Finally, the measured optical transmission and area coverage correlated closely to the observed $I_{{rm SC}}$. Angular losses were significant at angles as low as 25°.

14 SOLAR ENERGY↗
DOE OSTI2022

Non-equilibrium molecular dynamics simulation to evaluate the effect of confinement on fluid flow in silica nanopores

The flow of fluids in nano-confinement has applications in separations, water purification, medical systems and in the recovery of fluids in petroleum systems. It is believed that fluids do not obey continuum laws when flowing in nanopores (or in confinement). This paper attempts to shed light on various nano confinement effects such as fluid-wall interactions, pore size and molecular geometry, using molecular dynamic simulation. Here, water, hexane, and methanol flow behaviors were simulated for pore diameters ranging from 1 to 8 nm. In addition to the density analysis of the confined fluids, the fluid flows in saturated nanopores were simulated by the sectional flow method. Water and methanol molecules were completely stabilized in the 1 nm pore. Hexane molecules could not enter the 1 nm pore, due to geometric considerations. For the 2 – 8 nm pores, all fluids showed reduced flow rate compared to the Hagen–Poiseuille flow, due to an interfacial molecular layer stabilized at the pore surface. Flow reduction observed in these studies is contrary to significant flow enhancements observed for fluid flow in carbon nanotubes of similar dimensions. Water flow showed almost constant stick length for all the pore sizes. Methanol flow had the largest stick length. Hexane flow was reduced because of overcrowding of molecules at the pore surface. The effect of confinement diminished with an increase in pore diameter.

42 ENGINEERING↗