Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Phase transition kinetics and surface binding states of methylammonium lead iodide perovskite

We have presented a detailed analysis of phase transition kinetics and binding energy states of solution processed methylammonium lead iodide (MAPbI3) thin films prepared at ambient conditions and annealed at different elevated temperatures. The processing temperature and environmental conditions predominantly control the crystal structure and surface morphology of MAPbI3 thin films. The structural transformation from tetragonal to cubic occurs at 60C for 30 minutes annealing time while 10 minutes annelaed films posses tetragonal structure. The transformed phase is greatly intact even at higher annealing temperature of 150 C and time of 2 hours. Existence of charge transfer interaction between Pb 4f and I 3d oxidation states is quantified by the XPS spin orbit spilitting.

Kumar, G. R.↗

A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability

Spectrally-selective solar absorbers are widely used in solar hot water and concentrating solar power (CSP) systems. However, their performance at high temperatures (>450 °C) is still not satisfactory due to high infrared (IR) emittance and lack of long-term thermal stability. In this work, we explore yttria-stabilized zirconia (YSZ) cermet-based spectrally-selective surfaces for high-temperature solar absorber applications. The developed multilayer selective surface comprises two sunlight-absorbing W–Ni–YSZ cermet layers with different W–Ni volume fractions inside the YSZ matrix, two anti-reflection coatings (ARCs), and one tungsten IR reflection layer for reduced IR emittance and improved thermal stability, deposited on a polished stainless steel (SS) substrate. The fabricated solar absorbers are tested for their long-term thermal stability at 600 °C. We find a distinct change in the surface morphology of the solar absorbers when oxygen is highly deficient in the YSZ-ARC layers. The oxygen deficiency can be effectively overcome through increasing the oxygen partial pressure during sputtering, which leads to a stable solar absorber with a solar absorptance of ~0.91 and a total hemispherical emittance of ~0.13 at 500 °C. Those values are obtained at the actual operating temperature using an absolute and direct method that measures the total hemispherical emittance with high accuracy. In contrast, most reports on solar absorber development in the literature to date use only near room-temperature spectroscopy techniques that have been shown to significantly underestimate the total hemispherical emittance. This makes our experimentally demonstrated total hemispherical emittance value the lowest ever reported for a high-temperature stable solar absorber with solar absorptance above 0.9.

14 SOLAR ENERGY↗

Growth mechanisms and origin of localized surface plasmon resonance coupled exciton effects in Cu2_xS thin films

Cu2-xS thin films prepared by template free single step wet chemical method on fluorine doped tin oxide substrate without any surfactant exhibts localized surface plasmon resonance (LSPR) coupled exciton effects. Cu2-xS thin films of unique surface morphology and free carrier density due to copper vacancy is controlled by the growth temperature and time. These selectively grown Cu2-xS thin films possess tunable band gap (2.6 - 1.4 eV) due to quantum size effect. Eventhough, all the samples show satellite peak in the X-ray photoelectron spectra due to Cu vacancies, only the samples with higher oxygen concentration show LSPR in the near infrared region.

Environmental Molecular Sciences Laboratory↗

High electron mobility GaN grown under N-rich conditions by plasma-assisted molecular beam epitaxy

An alternative approach is presented for the plasma-assisted molecular beam epitaxy of high-quality GaN. Under N-rich growth conditions, an unexpected layer-by-layer growth mode was found for a wide range of growth temperatures in the GaN thermal decomposition regime (>750 deg. C). Consequently, superior surface morphologies with roughness of less than 1 nm (rms) have been achieved. For lightly Si-doped GaN films, room-temperature electron mobilities exceeding 1100 cm{sup 2}/V s were measured, surpassing the commonly insulating nature of GaN grown under N-rich conditions at low temperature.

36 MATERIALS SCIENCE↗

Electron field emission from nanostructured cubic boron nitride islands

Nanocrystal-assembled cubic boron nitride (cBN) islands are formed by using low-energy ({approx}20 eV) ion irradiation in an inductively coupled fluorine-containing plasma. The temporal evolution of surface morphology and roughness reveals three-dimensional island growth for initial sp{sup 2}-bonded BN and subsequent cBN, accompanied by a high frequency of renucleation. The formation of cBN islands enhances the field emission and reduces the turn-on field down to around 9 V/{mu}m due to an increase in the island-related field. The results demonstrate the high potential of cBN for field emitters, comparable to other wide band gap semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth and characterization of AlGaN/GaN heterostructures on semi-insulating GaN epilayers by molecular beam epitaxy

Al{sub 0.30}Ga{sub 0.70}N/GaN heterostructures grown on sapphire substrates by rf-plasma-assisted molecular beam epitaxy are investigated. The heterostructures consist of a 20 nm Al{sub 0.30}Ga{sub 0.70}N barrier layer deposited on a 2 {mu}m semi-insulating GaN epilayer. Room-temperature mobilities averaging 1350 cm{sup 2}/V s and a sheet charge density of 1.1x10{sup 13} cm{sup -2} are consistently achieved. Central to our approach is the iron-doped semi-insulating GaN epilayer and a pulsed N/Ga atomic deposition technique which makes it possible to simultaneously reduce threading dislocations and achieve a smooth surface. The heterostructures were examined by x-ray diffraction, transmission electron microscopy, and atomic force microscopy. Structural characterizations reveal a smooth surface morphology, coherent and sharp interfaces, and a low density of the threading dislocations.

36 MATERIALS SCIENCE↗

Effect of pressure on the properties of phosphorus-doped p-type ZnO thin films grown by radio frequency-magnetron sputtering

We report the effect of pressure on the surface morphology, electrical and optical properties of phosphorus (P)-doped p-type ZnO grown by radio frequency magnetron sputtering. The nanorod structures of P-doped ZnO films became dense and flat with decreasing pressure. The Hall effect measurement of the films grown at a pressure of 5-20 mTorr showed an n-type conductivity after rapid thermal annealing. However, the films grown at a low pressure of 1 mTorr showed a p-type conductivity with a hole concentration of 4.71x18{sup 18}/cm{sup 3}. This result showed that the pressure of rf-magnetron sputtering plays a critical role in the growth of P-doped p-type ZnO.

36 MATERIALS SCIENCE↗

Characterization of ZnO plasma in a radio frequency sputtering system

Plasma generated by the radio frequency (rf) magnetron sputtering of gallium doped zinc oxide (ZnO) has been studied using cylindrical Langmuir probe and optical emission spectroscopy. The electron density and electron temperature were calculated for various rf powers at different spatial positions along the propagation direction of the plume. The electron density was found to increase with argon gas pressure whereas electron temperature decreased. The focusing of the plasma due to the magnetic field of the magnetron was observed at 3 cm distance from the target at low rf powers, while shift in the focusing of the plume was observed for high sputtering powers. Plasma potential of the plume was also evaluated at all sputtering conditions and its spatial variations were studied. Optical emission spectra of the plume were recorded at various spatial positions of the plume to get qualitative estimate of species in the plasma at various sputtering conditions. ZnO thin films were deposited on glass substrates placed at 3 and 6 cm distances from the target at different sputtering conditions. X-ray diffraction and scanning electron microscopy studies were carried out to investigate the crystallographic properties and the surface morphology of films deposited at these distances in relation to the plasma parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray scattering and diffraction from ion beam induced ripples in crystalline silicon

We report on periodic ripple formation on Si(001) surfaces after bombardment with Xe{sup +} ions with energies between 5 and 35 keV under incidence angles of 65 deg. and 70 deg. The sputter process leads to the formation of a rippled amorphous surface layer, followed by a rippled interface toward crystalline material. Using grazing-incidence small-angle scattering and diffraction, we show that the surface morphology is exactly reproduced at the interface. In addition, we observe that the crystal lattice close to the interface is anisotropically expanded. The lattice expansion parallel to the ripples is larger than those perpendicular to them.

36 MATERIALS SCIENCE↗

Defect-controlled growth of GaN nanorods on (0001)sapphire by molecular beam epitaxy

Transmission electron microscopy is used to reveal threading defects in single crystal c-oriented GaN nanorods grown on (0001)sapphire by molecular beam epitaxy. The defects are shown to be planar faults lying on (1010) planes and bounded by opposite partial screw dislocations with Burgers vectors of 1/2<0001>. The faults nucleate, as dislocation half-loops, from points close to the GaN/(0001)sapphire interface. It is proposed that the spiral growth of the partial atomic step joining the emerging dislocations controls nanorod growth and accounts for the growth surface morphology. The significance of these defects for nanorod growth and applications is discussed.

36 MATERIALS SCIENCE↗

A comprehensive diagram to grow InAlN alloys by plasma-assisted molecular beam epitaxy

Indium incorporation and surface morphology of InAlN layers grown on (0001) GaN by plasma-assisted molecular beam epitaxy were investigated as a function of the impinging In flux and the substrate temperature in the 450-610 deg. C range. In incorporation was found to decrease with substrate temperature due to thermal decomposition of the growing layer, while for a given temperature it increased with the impinging In flux until stoichiometry was reached at the growth front. The InN losses during growth followed an Arrhenius behavior characterized by an activation energy of 2.0 eV. A growth diagram highly instrumental to identify optimum growth conditions was established.

36 MATERIALS SCIENCE↗

Enhancement in sensitivity of copper sulfide thin film ammonia gas sensor: Effect of swift heavy ion irradiation

The studies are carried out on the effect of swift heavy ion (SHI) irradiation on surface morphology and electrical properties of copper sulfide (Cu{sub x}S) thin films with three different chemical compositions (x values). The irradiation experiments have been carried out on Cu{sub x}S films with x=1.4, 1.8, and 2 by 100 MeV gold heavy ions at room temperature. These as-deposited and irradiated thin films have been used to detect ammonia gas at room temperature (300 K). The SHI irradiation treatment on x=1.4 and 1.8 copper sulfide films enhances the sensitivity of the gas sensor. The results are discussed considering high electronic energy deposition by 100 MeV gold heavy ions in a matrix of copper sulfide.

36 MATERIALS SCIENCE↗

Mechanisms of microhole formation on glasses by an abrasive slurry jet

Abrasive jet micromachining is considered as a promising precision processing technology for brittle materials such as silicon substrates and glasses that are increasingly used in various applications. In this paper, the mechanisms of microhole formation on brittle glasses by an abrasive slurry jet are studied based on the viscous flow and erosion theories. It is shown that the hole cross section is characterized by a ''W'' shape and can be classified into three zones caused, respectively, by jet direct impact, viscous flow, and turbulent flow induced erosion. An analysis of the surface morphology shows that ductile-mode erosion is dominant. The effect of process parameters on material removal is studied which shows that increasing the pressure and erosion time increases the hole depth, but has little effect on the hole diameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Great enhancement of pyroelectric properties for Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3} films on Pt-Si substrates by inserting a self-buffered layer

(100)-Ba{sub 0.65}Sr{sub 0.35}TiO{sub 3} (BST) films were deposited on Pt/Ti/SiO{sub 2}/Si substrates using a low-temperature self-buffered layer. X-ray diffraction and atomic force microscope investigations show that the microstructure of BST films strongly depends on surface morphology of annealed self-buffered layer. The mechanism of nucleus formation and the growth initiation of BST films on self-buffered layers were proposed. It was found that the pyroelectric properties of BST films can be greatly enhanced. The pyroelectric coefficient and material merit figure of (100)-BST films are 1.16x10{sup 4} {mu}C m{sup -2} K{sup -1} and 2.18x10{sup -4} Pa{sup -1/2}, respectively. The detectivity of 9.4x10{sup 7} cm Hz{sup 1/2} W{sup -1} was obtained in the (100)-BST film capacitors thermally isolated by 500 nm SiO{sub 2} films.

36 MATERIALS SCIENCE↗

Growth of AlGaN/GaN heterojunction field effect transistors on semi-insulating GaN using an AlGaN interlayer

Semi-insulating (SI) GaN layers were grown on 4H-SiC substrates by inserting an AlGaN layer between the AlN buffer and the GaN layer. Secondary ion mass spectroscopy measurements showed that the AlGaN layer prevented Si from diffusing from the substrate into the GaN layer. X-ray diffraction and atomic force microscopy analyses showed that an optimized AlGaN interlayer does not degrade the crystal quality or surface morphology of the SI GaN. The room temperature mobility of an AlGaN/GaN heterostructure using this SI GaN was 2200 cm{sup 2}/V s. High electron mobility transistors (HEMTs) with 0.65 {mu}m long gates were also fabricated on these SI GaN buffers. A power density of 19.0 W/mm with a power added efficiency of 48% was demonstrated at 10 GHz at a drain bias of 78 V. These HEMTs also exhibited sharp pinch off, low leakage, and negligible dispersion.

36 MATERIALS SCIENCE↗

Electrical properties and deep traps spectra of N-polar and Ga-polar AlGaN films grown by molecular beam epitaxy in a wide composition range

The polarity type, surface morphology, electrical properties, and deep trap spectra were studied for undoped Al{sub x}Ga{sub 1-x}N films (x=0-0.6) grown by molecular beam epitaxy on on-axis (0001) sapphire using composite buffers consisting of low temperature (LT) AlN nucleation layer, AlN, and AlN/AlGaN superlattice. It is shown that the films grow with N-polarity if the LT AlN layer is deposited under N-rich conditions and with Ga-polarity for the LT AlN layers deposited under Al-rich conditions. For both polarities the film morphology was acceptable for fabrication of typical GaN-based devices. It is demonstrated that the Ga-polar AlGaN films are heavily compensated p-type, with the dominant acceptors believed to be due to C. N-polar films are n type, with the residual donors pinning the Fermi level being most likely due to Si. N-polar films show a high concentration of deep electron traps.

36 MATERIALS SCIENCE↗

Effect of high-energy electron beam irradiation on the properties of ZnO thin films prepared by magnetron sputtering

In this work we demonstrate that high-energy electron beam irradiation (HEEBI) performed in air at room temperature affects remarkably the electrical, optical, and structural properties of undoped ZnO films prepared on SiO{sub 2} substrates by magnetron sputtering techniques. Hall and photoluminescence measurements revealed that the p-type conductivity was realized in HEEBI treated films with low dose of 10{sup 14} electrons/cm{sup 2} and converted to n-type conductivity with further increase in the amount of dose. X-ray photoelectron spectroscopy showed that indiffusion of Si from the substrate as well as N from the ambient into the films took place as a result of HEEBI treatment at high and low doses, respectively. X-ray diffraction analysis indicated that all as-grown films were found to have compressive stress, which was relieved to some extent by HEEBI treatment with high dose of 10{sup 16} electrons/cm{sup 2}. It was also found that better crystallinity with a bigger grain size was observed in HEEBI treated ZnO films with a higher dose. Field emission scanning electron microscope showed that HEEBI treated films with low dose had surface morphologies with big rodlike shapes. The major acceptorlike defects were determined to be oxygen interstitial and zinc vacancy. A model was proposed in terms of O, Zn, N, and Si diffusion to explain the observed results.

36 MATERIALS SCIENCE↗

Structure and corrosion behavior of platinum/ruthenium/nitrogen doped diamondlike carbon thin films

Platinum/ruthenium/nitrogen doped diamondlike carbon (PtRuN-DLC) thin films were deposited on p-Si (100) substrates with dc magnetron cosputtering by varying the dc power applied to a Pt{sub 50}Ru{sub 50} target to investigate the effect of Pt and Ru incorporation in the films on the bonding structure, adhesion strength, surface morphology, and corrosion behavior of the films by means of X-ray photoelectron spectroscopy, micro-Raman spectroscopy, microscratch test, atomic force microscopy, scanning electron microscopy, and potentiodynamic polarization test. It was found that the incorporation of Pt and Ru in the N-DLC films improved the corrosion resistance of the films in a 0.1M NaCl solution at lower polarization potentials though more sp{sup 2} bonds were formed in the films. However, the films with higher Pt and Ru contents degraded earlier than the ones with lower Pt and Ru contents at higher polarization potentials.

36 MATERIALS SCIENCE↗